437 строки
12 KiB
C
437 строки
12 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018 Marvell
|
|
*
|
|
* Author: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
|
|
*
|
|
* This file helps PCI controller drivers implement a fake root port
|
|
* PCI bridge when the HW doesn't provide such a root port PCI
|
|
* bridge.
|
|
*
|
|
* It emulates a PCI bridge by providing a fake PCI configuration
|
|
* space (and optionally a PCIe capability configuration space) in
|
|
* memory. By default the read/write operations simply read and update
|
|
* this fake configuration space in memory. However, PCI controller
|
|
* drivers can provide through the 'struct pci_sw_bridge_ops'
|
|
* structure a set of operations to override or complement this
|
|
* default behavior.
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include "pci-bridge-emul.h"
|
|
|
|
#define PCI_BRIDGE_CONF_END PCI_STD_HEADER_SIZEOF
|
|
#define PCI_CAP_PCIE_START PCI_BRIDGE_CONF_END
|
|
#define PCI_CAP_PCIE_END (PCI_CAP_PCIE_START + PCI_EXP_SLTSTA2 + 2)
|
|
|
|
/**
|
|
* struct pci_bridge_reg_behavior - register bits behaviors
|
|
* @ro: Read-Only bits
|
|
* @rw: Read-Write bits
|
|
* @w1c: Write-1-to-Clear bits
|
|
*
|
|
* Reads and Writes will be filtered by specified behavior. All other bits not
|
|
* declared are assumed 'Reserved' and will return 0 on reads, per PCIe 5.0:
|
|
* "Reserved register fields must be read only and must return 0 (all 0's for
|
|
* multi-bit fields) when read".
|
|
*/
|
|
struct pci_bridge_reg_behavior {
|
|
/* Read-only bits */
|
|
u32 ro;
|
|
|
|
/* Read-write bits */
|
|
u32 rw;
|
|
|
|
/* Write-1-to-clear bits */
|
|
u32 w1c;
|
|
};
|
|
|
|
static const struct pci_bridge_reg_behavior pci_regs_behavior[] = {
|
|
[PCI_VENDOR_ID / 4] = { .ro = ~0 },
|
|
[PCI_COMMAND / 4] = {
|
|
.rw = (PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
|
|
PCI_COMMAND_MASTER | PCI_COMMAND_PARITY |
|
|
PCI_COMMAND_SERR),
|
|
.ro = ((PCI_COMMAND_SPECIAL | PCI_COMMAND_INVALIDATE |
|
|
PCI_COMMAND_VGA_PALETTE | PCI_COMMAND_WAIT |
|
|
PCI_COMMAND_FAST_BACK) |
|
|
(PCI_STATUS_CAP_LIST | PCI_STATUS_66MHZ |
|
|
PCI_STATUS_FAST_BACK | PCI_STATUS_DEVSEL_MASK) << 16),
|
|
.w1c = PCI_STATUS_ERROR_BITS << 16,
|
|
},
|
|
[PCI_CLASS_REVISION / 4] = { .ro = ~0 },
|
|
|
|
/*
|
|
* Cache Line Size register: implement as read-only, we do not
|
|
* pretend implementing "Memory Write and Invalidate"
|
|
* transactions"
|
|
*
|
|
* Latency Timer Register: implemented as read-only, as "A
|
|
* bridge that is not capable of a burst transfer of more than
|
|
* two data phases on its primary interface is permitted to
|
|
* hardwire the Latency Timer to a value of 16 or less"
|
|
*
|
|
* Header Type: always read-only
|
|
*
|
|
* BIST register: implemented as read-only, as "A bridge that
|
|
* does not support BIST must implement this register as a
|
|
* read-only register that returns 0 when read"
|
|
*/
|
|
[PCI_CACHE_LINE_SIZE / 4] = { .ro = ~0 },
|
|
|
|
/*
|
|
* Base Address registers not used must be implemented as
|
|
* read-only registers that return 0 when read.
|
|
*/
|
|
[PCI_BASE_ADDRESS_0 / 4] = { .ro = ~0 },
|
|
[PCI_BASE_ADDRESS_1 / 4] = { .ro = ~0 },
|
|
|
|
[PCI_PRIMARY_BUS / 4] = {
|
|
/* Primary, secondary and subordinate bus are RW */
|
|
.rw = GENMASK(24, 0),
|
|
/* Secondary latency is read-only */
|
|
.ro = GENMASK(31, 24),
|
|
},
|
|
|
|
[PCI_IO_BASE / 4] = {
|
|
/* The high four bits of I/O base/limit are RW */
|
|
.rw = (GENMASK(15, 12) | GENMASK(7, 4)),
|
|
|
|
/* The low four bits of I/O base/limit are RO */
|
|
.ro = (((PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK |
|
|
PCI_STATUS_DEVSEL_MASK) << 16) |
|
|
GENMASK(11, 8) | GENMASK(3, 0)),
|
|
|
|
.w1c = PCI_STATUS_ERROR_BITS << 16,
|
|
},
|
|
|
|
[PCI_MEMORY_BASE / 4] = {
|
|
/* The high 12-bits of mem base/limit are RW */
|
|
.rw = GENMASK(31, 20) | GENMASK(15, 4),
|
|
|
|
/* The low four bits of mem base/limit are RO */
|
|
.ro = GENMASK(19, 16) | GENMASK(3, 0),
|
|
},
|
|
|
|
[PCI_PREF_MEMORY_BASE / 4] = {
|
|
/* The high 12-bits of pref mem base/limit are RW */
|
|
.rw = GENMASK(31, 20) | GENMASK(15, 4),
|
|
|
|
/* The low four bits of pref mem base/limit are RO */
|
|
.ro = GENMASK(19, 16) | GENMASK(3, 0),
|
|
},
|
|
|
|
[PCI_PREF_BASE_UPPER32 / 4] = {
|
|
.rw = ~0,
|
|
},
|
|
|
|
[PCI_PREF_LIMIT_UPPER32 / 4] = {
|
|
.rw = ~0,
|
|
},
|
|
|
|
[PCI_IO_BASE_UPPER16 / 4] = {
|
|
.rw = ~0,
|
|
},
|
|
|
|
[PCI_CAPABILITY_LIST / 4] = {
|
|
.ro = GENMASK(7, 0),
|
|
},
|
|
|
|
[PCI_ROM_ADDRESS1 / 4] = {
|
|
.rw = GENMASK(31, 11) | BIT(0),
|
|
},
|
|
|
|
/*
|
|
* Interrupt line (bits 7:0) are RW, interrupt pin (bits 15:8)
|
|
* are RO, and bridge control (31:16) are a mix of RW, RO,
|
|
* reserved and W1C bits
|
|
*/
|
|
[PCI_INTERRUPT_LINE / 4] = {
|
|
/* Interrupt line is RW */
|
|
.rw = (GENMASK(7, 0) |
|
|
((PCI_BRIDGE_CTL_PARITY |
|
|
PCI_BRIDGE_CTL_SERR |
|
|
PCI_BRIDGE_CTL_ISA |
|
|
PCI_BRIDGE_CTL_VGA |
|
|
PCI_BRIDGE_CTL_MASTER_ABORT |
|
|
PCI_BRIDGE_CTL_BUS_RESET |
|
|
BIT(8) | BIT(9) | BIT(11)) << 16)),
|
|
|
|
/* Interrupt pin is RO */
|
|
.ro = (GENMASK(15, 8) | ((PCI_BRIDGE_CTL_FAST_BACK) << 16)),
|
|
|
|
.w1c = BIT(10) << 16,
|
|
},
|
|
};
|
|
|
|
static const struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = {
|
|
[PCI_CAP_LIST_ID / 4] = {
|
|
/*
|
|
* Capability ID, Next Capability Pointer and
|
|
* Capabilities register are all read-only.
|
|
*/
|
|
.ro = ~0,
|
|
},
|
|
|
|
[PCI_EXP_DEVCAP / 4] = {
|
|
.ro = ~0,
|
|
},
|
|
|
|
[PCI_EXP_DEVCTL / 4] = {
|
|
/* Device control register is RW */
|
|
.rw = GENMASK(15, 0),
|
|
|
|
/*
|
|
* Device status register has bits 6 and [3:0] W1C, [5:4] RO,
|
|
* the rest is reserved
|
|
*/
|
|
.w1c = (BIT(6) | GENMASK(3, 0)) << 16,
|
|
.ro = GENMASK(5, 4) << 16,
|
|
},
|
|
|
|
[PCI_EXP_LNKCAP / 4] = {
|
|
/* All bits are RO, except bit 23 which is reserved */
|
|
.ro = lower_32_bits(~BIT(23)),
|
|
},
|
|
|
|
[PCI_EXP_LNKCTL / 4] = {
|
|
/*
|
|
* Link control has bits [15:14], [11:3] and [1:0] RW, the
|
|
* rest is reserved.
|
|
*
|
|
* Link status has bits [13:0] RO, and bits [15:14]
|
|
* W1C.
|
|
*/
|
|
.rw = GENMASK(15, 14) | GENMASK(11, 3) | GENMASK(1, 0),
|
|
.ro = GENMASK(13, 0) << 16,
|
|
.w1c = GENMASK(15, 14) << 16,
|
|
},
|
|
|
|
[PCI_EXP_SLTCAP / 4] = {
|
|
.ro = ~0,
|
|
},
|
|
|
|
[PCI_EXP_SLTCTL / 4] = {
|
|
/*
|
|
* Slot control has bits [14:0] RW, the rest is
|
|
* reserved.
|
|
*
|
|
* Slot status has bits 8 and [4:0] W1C, bits [7:5] RO, the
|
|
* rest is reserved.
|
|
*/
|
|
.rw = GENMASK(14, 0),
|
|
.w1c = (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
|
|
PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC |
|
|
PCI_EXP_SLTSTA_CC | PCI_EXP_SLTSTA_DLLSC) << 16,
|
|
.ro = (PCI_EXP_SLTSTA_MRLSS | PCI_EXP_SLTSTA_PDS |
|
|
PCI_EXP_SLTSTA_EIS) << 16,
|
|
},
|
|
|
|
[PCI_EXP_RTCTL / 4] = {
|
|
/*
|
|
* Root control has bits [4:0] RW, the rest is
|
|
* reserved.
|
|
*
|
|
* Root capabilities has bit 0 RO, the rest is reserved.
|
|
*/
|
|
.rw = (PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE |
|
|
PCI_EXP_RTCTL_SEFEE | PCI_EXP_RTCTL_PMEIE |
|
|
PCI_EXP_RTCTL_CRSSVE),
|
|
.ro = PCI_EXP_RTCAP_CRSVIS << 16,
|
|
},
|
|
|
|
[PCI_EXP_RTSTA / 4] = {
|
|
/*
|
|
* Root status has bits 17 and [15:0] RO, bit 16 W1C, the rest
|
|
* is reserved.
|
|
*/
|
|
.ro = GENMASK(15, 0) | PCI_EXP_RTSTA_PENDING,
|
|
.w1c = PCI_EXP_RTSTA_PME,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Initialize a pci_bridge_emul structure to represent a fake PCI
|
|
* bridge configuration space. The caller needs to have initialized
|
|
* the PCI configuration space with whatever values make sense
|
|
* (typically at least vendor, device, revision), the ->ops pointer,
|
|
* and optionally ->data and ->has_pcie.
|
|
*/
|
|
int pci_bridge_emul_init(struct pci_bridge_emul *bridge,
|
|
unsigned int flags)
|
|
{
|
|
bridge->conf.class_revision |= cpu_to_le32(PCI_CLASS_BRIDGE_PCI << 16);
|
|
bridge->conf.header_type = PCI_HEADER_TYPE_BRIDGE;
|
|
bridge->conf.cache_line_size = 0x10;
|
|
bridge->conf.status = cpu_to_le16(PCI_STATUS_CAP_LIST);
|
|
bridge->pci_regs_behavior = kmemdup(pci_regs_behavior,
|
|
sizeof(pci_regs_behavior),
|
|
GFP_KERNEL);
|
|
if (!bridge->pci_regs_behavior)
|
|
return -ENOMEM;
|
|
|
|
if (bridge->has_pcie) {
|
|
bridge->conf.capabilities_pointer = PCI_CAP_PCIE_START;
|
|
bridge->pcie_conf.cap_id = PCI_CAP_ID_EXP;
|
|
/* Set PCIe v2, root port, slot support */
|
|
bridge->pcie_conf.cap =
|
|
cpu_to_le16(PCI_EXP_TYPE_ROOT_PORT << 4 | 2 |
|
|
PCI_EXP_FLAGS_SLOT);
|
|
bridge->pcie_cap_regs_behavior =
|
|
kmemdup(pcie_cap_regs_behavior,
|
|
sizeof(pcie_cap_regs_behavior),
|
|
GFP_KERNEL);
|
|
if (!bridge->pcie_cap_regs_behavior) {
|
|
kfree(bridge->pci_regs_behavior);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
if (flags & PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR) {
|
|
bridge->pci_regs_behavior[PCI_PREF_MEMORY_BASE / 4].ro = ~0;
|
|
bridge->pci_regs_behavior[PCI_PREF_MEMORY_BASE / 4].rw = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_bridge_emul_init);
|
|
|
|
/*
|
|
* Cleanup a pci_bridge_emul structure that was previously initialized
|
|
* using pci_bridge_emul_init().
|
|
*/
|
|
void pci_bridge_emul_cleanup(struct pci_bridge_emul *bridge)
|
|
{
|
|
if (bridge->has_pcie)
|
|
kfree(bridge->pcie_cap_regs_behavior);
|
|
kfree(bridge->pci_regs_behavior);
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_bridge_emul_cleanup);
|
|
|
|
/*
|
|
* Should be called by the PCI controller driver when reading the PCI
|
|
* configuration space of the fake bridge. It will call back the
|
|
* ->ops->read_base or ->ops->read_pcie operations.
|
|
*/
|
|
int pci_bridge_emul_conf_read(struct pci_bridge_emul *bridge, int where,
|
|
int size, u32 *value)
|
|
{
|
|
int ret;
|
|
int reg = where & ~3;
|
|
pci_bridge_emul_read_status_t (*read_op)(struct pci_bridge_emul *bridge,
|
|
int reg, u32 *value);
|
|
__le32 *cfgspace;
|
|
const struct pci_bridge_reg_behavior *behavior;
|
|
|
|
if (bridge->has_pcie && reg >= PCI_CAP_PCIE_END) {
|
|
*value = 0;
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
if (!bridge->has_pcie && reg >= PCI_BRIDGE_CONF_END) {
|
|
*value = 0;
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
if (bridge->has_pcie && reg >= PCI_CAP_PCIE_START) {
|
|
reg -= PCI_CAP_PCIE_START;
|
|
read_op = bridge->ops->read_pcie;
|
|
cfgspace = (__le32 *) &bridge->pcie_conf;
|
|
behavior = bridge->pcie_cap_regs_behavior;
|
|
} else {
|
|
read_op = bridge->ops->read_base;
|
|
cfgspace = (__le32 *) &bridge->conf;
|
|
behavior = bridge->pci_regs_behavior;
|
|
}
|
|
|
|
if (read_op)
|
|
ret = read_op(bridge, reg, value);
|
|
else
|
|
ret = PCI_BRIDGE_EMUL_NOT_HANDLED;
|
|
|
|
if (ret == PCI_BRIDGE_EMUL_NOT_HANDLED)
|
|
*value = le32_to_cpu(cfgspace[reg / 4]);
|
|
|
|
/*
|
|
* Make sure we never return any reserved bit with a value
|
|
* different from 0.
|
|
*/
|
|
*value &= behavior[reg / 4].ro | behavior[reg / 4].rw |
|
|
behavior[reg / 4].w1c;
|
|
|
|
if (size == 1)
|
|
*value = (*value >> (8 * (where & 3))) & 0xff;
|
|
else if (size == 2)
|
|
*value = (*value >> (8 * (where & 3))) & 0xffff;
|
|
else if (size != 4)
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_bridge_emul_conf_read);
|
|
|
|
/*
|
|
* Should be called by the PCI controller driver when writing the PCI
|
|
* configuration space of the fake bridge. It will call back the
|
|
* ->ops->write_base or ->ops->write_pcie operations.
|
|
*/
|
|
int pci_bridge_emul_conf_write(struct pci_bridge_emul *bridge, int where,
|
|
int size, u32 value)
|
|
{
|
|
int reg = where & ~3;
|
|
int mask, ret, old, new, shift;
|
|
void (*write_op)(struct pci_bridge_emul *bridge, int reg,
|
|
u32 old, u32 new, u32 mask);
|
|
__le32 *cfgspace;
|
|
const struct pci_bridge_reg_behavior *behavior;
|
|
|
|
if (bridge->has_pcie && reg >= PCI_CAP_PCIE_END)
|
|
return PCIBIOS_SUCCESSFUL;
|
|
|
|
if (!bridge->has_pcie && reg >= PCI_BRIDGE_CONF_END)
|
|
return PCIBIOS_SUCCESSFUL;
|
|
|
|
shift = (where & 0x3) * 8;
|
|
|
|
if (size == 4)
|
|
mask = 0xffffffff;
|
|
else if (size == 2)
|
|
mask = 0xffff << shift;
|
|
else if (size == 1)
|
|
mask = 0xff << shift;
|
|
else
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
ret = pci_bridge_emul_conf_read(bridge, reg, 4, &old);
|
|
if (ret != PCIBIOS_SUCCESSFUL)
|
|
return ret;
|
|
|
|
if (bridge->has_pcie && reg >= PCI_CAP_PCIE_START) {
|
|
reg -= PCI_CAP_PCIE_START;
|
|
write_op = bridge->ops->write_pcie;
|
|
cfgspace = (__le32 *) &bridge->pcie_conf;
|
|
behavior = bridge->pcie_cap_regs_behavior;
|
|
} else {
|
|
write_op = bridge->ops->write_base;
|
|
cfgspace = (__le32 *) &bridge->conf;
|
|
behavior = bridge->pci_regs_behavior;
|
|
}
|
|
|
|
/* Keep all bits, except the RW bits */
|
|
new = old & (~mask | ~behavior[reg / 4].rw);
|
|
|
|
/* Update the value of the RW bits */
|
|
new |= (value << shift) & (behavior[reg / 4].rw & mask);
|
|
|
|
/* Clear the W1C bits */
|
|
new &= ~((value << shift) & (behavior[reg / 4].w1c & mask));
|
|
|
|
cfgspace[reg / 4] = cpu_to_le32(new);
|
|
|
|
if (write_op)
|
|
write_op(bridge, reg, old, new, mask);
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_bridge_emul_conf_write);
|