45 строки
1.6 KiB
Plaintext
45 строки
1.6 KiB
Plaintext
What: /sys/kernel/debug/wilco_ec/h1_gpio
|
|
Date: April 2019
|
|
KernelVersion: 5.2
|
|
Description:
|
|
As part of Chrome OS's FAFT (Fully Automated Firmware Testing)
|
|
tests, we need to ensure that the H1 chip is properly setting
|
|
some GPIO lines. The h1_gpio attribute exposes the state
|
|
of the lines:
|
|
- ENTRY_TO_FACT_MODE in BIT(0)
|
|
- SPI_CHROME_SEL in BIT(1)
|
|
|
|
Output will formatted with "0x%02x\n".
|
|
|
|
What: /sys/kernel/debug/wilco_ec/raw
|
|
Date: January 2019
|
|
KernelVersion: 5.1
|
|
Description:
|
|
Write and read raw mailbox commands to the EC.
|
|
|
|
You can write a hexadecimal sentence to raw, and that series of
|
|
bytes will be sent to the EC. Then, you can read the bytes of
|
|
response by reading from raw.
|
|
|
|
For writing, bytes 0-1 indicate the message type, one of enum
|
|
wilco_ec_msg_type. Byte 2+ consist of the data passed in the
|
|
request, starting at MBOX[0]. At least three bytes are required
|
|
for writing, two for the type and at least a single byte of
|
|
data.
|
|
|
|
Example:
|
|
// Request EC info type 3 (EC firmware build date)
|
|
// Corresponds with sending type 0x00f0 with
|
|
// MBOX = [38, 00, 03, 00]
|
|
$ echo 00 f0 38 00 03 00 > /sys/kernel/debug/wilco_ec/raw
|
|
// View the result. The decoded ASCII result "12/21/18" is
|
|
// included after the raw hex.
|
|
// Corresponds with MBOX = [00, 00, 31, 32, 2f, 32, 31, 38, ...]
|
|
$ cat /sys/kernel/debug/wilco_ec/raw
|
|
00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00 ..12/21/18.8...
|
|
|
|
Note that the first 16 bytes of the received MBOX[] will be
|
|
printed, even if some of the data is junk, and skipping bytes
|
|
17 to 32. It is up to you to know how many of the first bytes of
|
|
data are the actual response.
|