WSL2-Linux-Kernel/drivers/serial
Jay Lubomirski 2f4d4da8f8 serial: clear proper MPSC interrupt cause bits
The interrupt clearing code in mpsc_sdma_intr_ack() mistakenly clears the
interrupt for both controllers instead of just the one its supposed to.
This can result in the other controller appearing to hang because its
interrupt was effectively lost.

So, don't clear the interrupt cause bits for both MPSC controllers when
clearing the interrupt for one of them.  Just clear the one that is
supposed to be cleared.

Signed-off-by: Jay Lubomirski <jaylubo@motorola.com>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28 11:38:29 -07:00
..
cpm_uart [POWERPC] CPM_UART: Removed __init from cpm_uart_init_portdesc to fix warning 2007-05-09 23:44:58 -05:00
jsm Subject: jsm driver fix for linuxpps support 2007-05-08 11:15:03 -07:00
8250.c NS16550A: Restore HS settings in EXCR2 on resume 2007-05-17 05:25:49 -07:00
8250.h Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
8250_accent.c [SERIAL] Use an enum for serial8250 platform device IDs 2005-09-08 16:04:41 +01:00
8250_acorn.c [ARM] ecard: add ecardm_iomap() / ecardm_iounmap() 2007-05-11 17:19:02 +01:00
8250_au1x00.c [SERIAL] AMD Alchemy UART: claim memory range 2006-04-30 11:15:58 +01:00
8250_boca.c [SERIAL] Use an enum for serial8250 platform device IDs 2005-09-08 16:04:41 +01:00
8250_early.c [SERIAL] kernel console should send CRLF not LFCR 2006-03-20 20:00:09 +00:00
8250_exar_st16c554.c [PATCH] Exar quad port serial 2006-12-07 08:39:35 -08:00
8250_fourport.c [SERIAL] Use an enum for serial8250 platform device IDs 2005-09-08 16:04:41 +01:00
8250_gsc.c [PARISC] Clean up asm-parisc/serial.h 2006-10-04 06:47:03 -06:00
8250_hp300.c [PATCH] hp300: fix driver_register() return handling, remove dio_module_init() 2006-03-25 08:22:53 -08:00
8250_hub6.c [SERIAL] Use an enum for serial8250 platform device IDs 2005-09-08 16:04:41 +01:00
8250_mca.c Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
8250_pci.c [PATCH] remove many unneeded #includes of sched.h 2007-02-14 08:09:54 -08:00
8250_pnp.c [PATCH] add Fujitsu Siemens Tablet PC devices to 8250_pnp.c 2007-03-23 11:01:22 -07:00
21285.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
68328serial.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
68328serial.h Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
68360serial.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
Kconfig [ARM] 4332/2: KS8695: Serial driver 2007-05-11 22:02:52 +01:00
Makefile [ARM] 4332/2: KS8695: Serial driver 2007-05-11 22:02:52 +01:00
amba-pl010.c [ARM] Fix 4417/1: Serial: Fix AMBA drivers locking 2007-06-05 19:39:49 +01:00
amba-pl011.c [ARM] 4417/1: Serial: Fix AMBA drivers locking 2007-05-30 14:33:01 +01:00
atmel_serial.c [ARM] 4357/1: AT91: Support slower serial baud-rates 2007-05-03 14:12:45 +01:00
atmel_serial.h [ARM] 4357/1: AT91: Support slower serial baud-rates 2007-05-03 14:12:45 +01:00
bfin_5xx.c Blackfin serial driver: decouple PARODD and CMSPAR checking from PARENB 2007-06-11 16:16:45 +08:00
clps711x.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
crisv10.c [PATCH] Char: tty_wakeup cleanup 2007-02-11 10:51:26 -08:00
dz.c [PATCH] dz: remove struct pt_regs references 2007-03-05 07:57:51 -08:00
dz.h [PATCH] dz: Fixes to make it work 2006-12-07 08:39:41 -08:00
icom.c icom: add new sub-device-id to support new adapter 2007-05-17 05:23:05 -07:00
icom.h do not truncate irq number for icom adapter 2007-04-24 08:23:08 -07:00
imx.c [ARM] 4328/1: Move i.MX UART regs to driver 2007-05-03 20:24:21 +01:00
ioc3_serial.c [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
ioc4_serial.c [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
ip22zilog.c [PATCH] remove many unneeded #includes of sched.h 2007-02-14 08:09:54 -08:00
ip22zilog.h Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
m32r_sio.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
m32r_sio.h Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
m32r_sio_reg.h Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
mcfserial.c [PATCH] m68knommu: fix work queues in mcfserial.c driver 2007-03-06 18:08:38 -08:00
mcfserial.h Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
mpc52xx_uart.c [POWERPC] Don't shutdown TX on mpc5200 serial port if it is a console 2007-05-07 20:31:15 +10:00
mpsc.c serial: clear proper MPSC interrupt cause bits 2007-06-28 11:38:29 -07:00
mux.c Merge branch 'parisc' from /home/kyle/repos/parisc-2.6.git 2007-02-17 00:18:23 -05:00
netx-serial.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
of_serial.c Merge branch 'linux-2.6' 2007-05-08 13:37:51 +10:00
pmac_zilog.c [POWERPC] Rename device_is_compatible to of_device_is_compatible 2007-05-07 20:31:14 +10:00
pmac_zilog.h [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
pnx8xxx_uart.c [PATCH] PNX8550 UART driver 2007-02-14 08:09:52 -08:00
pxa.c [ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX 2007-04-21 23:14:01 +01:00
s3c2410.c SPIN_LOCK_UNLOCKED cleanup in drivers/serial 2007-05-08 11:15:11 -07:00
sa1100.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
serial_core.c Serial: serial_core, use pr_debug 2007-05-07 12:12:51 -07:00
serial_cs.c serial: Add PCMCIA IDs for Quatech DSP-100 dual RS232 adapter. 2007-02-16 15:19:16 -08:00
serial_ks8695.c [ARM] 4411/1: KS8695: Another serial driver fix 2007-05-30 13:15:19 +01:00
serial_lh7a40x.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
serial_txx9.c serial_txx9: zap changelog from source code 2007-05-08 11:15:12 -07:00
sh-sci.c serial: sh-sci: Fix module clock refcount for serial console. 2007-05-07 02:11:56 +00:00
sh-sci.h sh: MS7712SE01 board support. 2007-05-07 02:10:54 +00:00
sn_console.c [PATCH] 2.6 Altix: console fix for CONFIG_DEBUG_SHIRQ usage 2007-03-08 07:39:15 -08:00
suncore.c [SPARC]: Linux always started with 9600 8N1 2007-05-29 02:50:07 -07:00
suncore.h Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
sunhv.c [SPARC64]: Add hypervisor API negotiation and fix console bugs. 2007-05-15 20:23:02 -07:00
sunsab.c [PATCH] remove many unneeded #includes of sched.h 2007-02-14 08:09:54 -08:00
sunsab.h [SUNSAB]: Defer register updates until transmitter is idle. 2005-05-11 11:34:32 -07:00
sunsu.c [SERIAL] sunsu: Fix section mismatch warnings. 2007-05-07 00:14:13 -07:00
sunzilog.c [SERIAL] sunzilog: section mismatch fix 2007-05-29 02:49:17 -07:00
sunzilog.h [SERIAL] sunzilog: Interrupt enable before ISR handler installed 2007-05-09 13:49:04 -07:00
uartlite.c [PATCH] drivers/serial NULL noise removal 2007-02-09 09:14:06 -08:00
v850e_uart.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
vr41xx_siu.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00