WSL2-Linux-Kernel/drivers/usb
Sarah Sharp 74f9fe21e0 USB: xhci: Make reverting an alt setting "unfailable".
When a driver wants to switch to a different alternate setting for an
interface, the USB core will (soon) check whether there is enough
bandwidth.  Once the new alternate setting is installed in the xHCI
hardware, the USB core will send a USB_REQ_SET_INTERFACE control
message.  That can fail in various ways, and the USB core needs to be
able to reinstate the old alternate setting.

With the old code, reinstating the old alt setting could fail if the
there's not enough memory to allocate new endpoint rings.  Keep
around a cache of (at most 31) endpoint rings for this case.  When we
successfully switch the xHCI hardware to the new alt setting, the old
alt setting's rings will be stored in the cache.  Therefore we'll
always have enough rings to satisfy a conversion back to a previous
device setting.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:55:27 -08:00
..
atm tree-wide: fix assorted typos all over the place 2009-12-04 15:39:55 +01:00
c67x00 usb/c67x00 endianness annotations 2008-06-04 08:06:01 -07:00
class USB: usbtmc: Use usb_clear_halt() instead of custom code. 2009-12-11 11:55:27 -08:00
core USB: add remove_id sysfs attr for usb drivers 2009-12-11 11:55:26 -08:00
early USB: ehci-dbgp: errata for EHCI debug/host controller synchronization 2009-09-23 06:46:38 -07:00
gadget USB: g_multi kconfig: fix depends and help text 2009-12-11 11:55:26 -08:00
host USB: xhci: Make reverting an alt setting "unfailable". 2009-12-11 11:55:27 -08:00
image USB: remove unneeded printks from microtek driver 2009-09-23 06:46:34 -07:00
misc usbtest: make module param pattern writeable 2009-12-11 11:55:22 -08:00
mon USB: add scatter-gather support to usbmon 2009-12-11 11:55:20 -08:00
musb USB: musb_gadget: remove pointless loop 2009-12-11 11:55:25 -08:00
otg USB: twl4030: Enable USB regulators before enabling USB charging 2009-12-11 11:55:25 -08:00
serial USB: option: add pid for ZTE 2009-12-11 11:55:26 -08:00
storage USB: usb-storage: fix bug in fill_inquiry 2009-12-11 11:55:26 -08:00
wusbcore USB: wusb: correctly check size of security descriptor. 2009-12-11 11:55:26 -08:00
Kconfig USB: ehci: Allow EHCI to be built on OMAP3 2009-12-11 11:55:20 -08:00
Makefile USB OTG: Add generic driver for ULPI OTG transceiver 2009-12-11 11:55:16 -08:00
README USB: fix directory references in usb/README 2007-11-28 13:58:34 -08:00
usb-skeleton.c USB: skeleton: Correct use of ! and & 2009-12-11 11:55:14 -08:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.