485 строки
11 KiB
C
485 строки
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* I2C bus driver for Amlogic Meson SoCs
|
|
*
|
|
* Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/types.h>
|
|
|
|
/* Meson I2C register map */
|
|
#define REG_CTRL 0x00
|
|
#define REG_SLAVE_ADDR 0x04
|
|
#define REG_TOK_LIST0 0x08
|
|
#define REG_TOK_LIST1 0x0c
|
|
#define REG_TOK_WDATA0 0x10
|
|
#define REG_TOK_WDATA1 0x14
|
|
#define REG_TOK_RDATA0 0x18
|
|
#define REG_TOK_RDATA1 0x1c
|
|
|
|
/* Control register fields */
|
|
#define REG_CTRL_START BIT(0)
|
|
#define REG_CTRL_ACK_IGNORE BIT(1)
|
|
#define REG_CTRL_STATUS BIT(2)
|
|
#define REG_CTRL_ERROR BIT(3)
|
|
#define REG_CTRL_CLKDIV_SHIFT 12
|
|
#define REG_CTRL_CLKDIV_MASK GENMASK(21, 12)
|
|
#define REG_CTRL_CLKDIVEXT_SHIFT 28
|
|
#define REG_CTRL_CLKDIVEXT_MASK GENMASK(29, 28)
|
|
|
|
#define I2C_TIMEOUT_MS 500
|
|
|
|
enum {
|
|
TOKEN_END = 0,
|
|
TOKEN_START,
|
|
TOKEN_SLAVE_ADDR_WRITE,
|
|
TOKEN_SLAVE_ADDR_READ,
|
|
TOKEN_DATA,
|
|
TOKEN_DATA_LAST,
|
|
TOKEN_STOP,
|
|
};
|
|
|
|
enum {
|
|
STATE_IDLE,
|
|
STATE_READ,
|
|
STATE_WRITE,
|
|
};
|
|
|
|
struct meson_i2c_data {
|
|
unsigned char div_factor;
|
|
};
|
|
|
|
/**
|
|
* struct meson_i2c - Meson I2C device private data
|
|
*
|
|
* @adap: I2C adapter instance
|
|
* @dev: Pointer to device structure
|
|
* @regs: Base address of the device memory mapped registers
|
|
* @clk: Pointer to clock structure
|
|
* @msg: Pointer to the current I2C message
|
|
* @state: Current state in the driver state machine
|
|
* @last: Flag set for the last message in the transfer
|
|
* @count: Number of bytes to be sent/received in current transfer
|
|
* @pos: Current position in the send/receive buffer
|
|
* @error: Flag set when an error is received
|
|
* @lock: To avoid race conditions between irq handler and xfer code
|
|
* @done: Completion used to wait for transfer termination
|
|
* @tokens: Sequence of tokens to be written to the device
|
|
* @num_tokens: Number of tokens
|
|
* @data: Pointer to the controlller's platform data
|
|
*/
|
|
struct meson_i2c {
|
|
struct i2c_adapter adap;
|
|
struct device *dev;
|
|
void __iomem *regs;
|
|
struct clk *clk;
|
|
|
|
struct i2c_msg *msg;
|
|
int state;
|
|
bool last;
|
|
int count;
|
|
int pos;
|
|
int error;
|
|
|
|
spinlock_t lock;
|
|
struct completion done;
|
|
u32 tokens[2];
|
|
int num_tokens;
|
|
|
|
const struct meson_i2c_data *data;
|
|
};
|
|
|
|
static void meson_i2c_set_mask(struct meson_i2c *i2c, int reg, u32 mask,
|
|
u32 val)
|
|
{
|
|
u32 data;
|
|
|
|
data = readl(i2c->regs + reg);
|
|
data &= ~mask;
|
|
data |= val & mask;
|
|
writel(data, i2c->regs + reg);
|
|
}
|
|
|
|
static void meson_i2c_reset_tokens(struct meson_i2c *i2c)
|
|
{
|
|
i2c->tokens[0] = 0;
|
|
i2c->tokens[1] = 0;
|
|
i2c->num_tokens = 0;
|
|
}
|
|
|
|
static void meson_i2c_add_token(struct meson_i2c *i2c, int token)
|
|
{
|
|
if (i2c->num_tokens < 8)
|
|
i2c->tokens[0] |= (token & 0xf) << (i2c->num_tokens * 4);
|
|
else
|
|
i2c->tokens[1] |= (token & 0xf) << ((i2c->num_tokens % 8) * 4);
|
|
|
|
i2c->num_tokens++;
|
|
}
|
|
|
|
static void meson_i2c_set_clk_div(struct meson_i2c *i2c, unsigned int freq)
|
|
{
|
|
unsigned long clk_rate = clk_get_rate(i2c->clk);
|
|
unsigned int div;
|
|
|
|
div = DIV_ROUND_UP(clk_rate, freq * i2c->data->div_factor);
|
|
|
|
/* clock divider has 12 bits */
|
|
if (div >= (1 << 12)) {
|
|
dev_err(i2c->dev, "requested bus frequency too low\n");
|
|
div = (1 << 12) - 1;
|
|
}
|
|
|
|
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV_MASK,
|
|
(div & GENMASK(9, 0)) << REG_CTRL_CLKDIV_SHIFT);
|
|
|
|
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIVEXT_MASK,
|
|
(div >> 10) << REG_CTRL_CLKDIVEXT_SHIFT);
|
|
|
|
dev_dbg(i2c->dev, "%s: clk %lu, freq %u, div %u\n", __func__,
|
|
clk_rate, freq, div);
|
|
}
|
|
|
|
static void meson_i2c_get_data(struct meson_i2c *i2c, char *buf, int len)
|
|
{
|
|
u32 rdata0, rdata1;
|
|
int i;
|
|
|
|
rdata0 = readl(i2c->regs + REG_TOK_RDATA0);
|
|
rdata1 = readl(i2c->regs + REG_TOK_RDATA1);
|
|
|
|
dev_dbg(i2c->dev, "%s: data %08x %08x len %d\n", __func__,
|
|
rdata0, rdata1, len);
|
|
|
|
for (i = 0; i < min(4, len); i++)
|
|
*buf++ = (rdata0 >> i * 8) & 0xff;
|
|
|
|
for (i = 4; i < min(8, len); i++)
|
|
*buf++ = (rdata1 >> (i - 4) * 8) & 0xff;
|
|
}
|
|
|
|
static void meson_i2c_put_data(struct meson_i2c *i2c, char *buf, int len)
|
|
{
|
|
u32 wdata0 = 0, wdata1 = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < min(4, len); i++)
|
|
wdata0 |= *buf++ << (i * 8);
|
|
|
|
for (i = 4; i < min(8, len); i++)
|
|
wdata1 |= *buf++ << ((i - 4) * 8);
|
|
|
|
writel(wdata0, i2c->regs + REG_TOK_WDATA0);
|
|
writel(wdata1, i2c->regs + REG_TOK_WDATA1);
|
|
|
|
dev_dbg(i2c->dev, "%s: data %08x %08x len %d\n", __func__,
|
|
wdata0, wdata1, len);
|
|
}
|
|
|
|
static void meson_i2c_prepare_xfer(struct meson_i2c *i2c)
|
|
{
|
|
bool write = !(i2c->msg->flags & I2C_M_RD);
|
|
int i;
|
|
|
|
i2c->count = min(i2c->msg->len - i2c->pos, 8);
|
|
|
|
for (i = 0; i < i2c->count - 1; i++)
|
|
meson_i2c_add_token(i2c, TOKEN_DATA);
|
|
|
|
if (i2c->count) {
|
|
if (write || i2c->pos + i2c->count < i2c->msg->len)
|
|
meson_i2c_add_token(i2c, TOKEN_DATA);
|
|
else
|
|
meson_i2c_add_token(i2c, TOKEN_DATA_LAST);
|
|
}
|
|
|
|
if (write)
|
|
meson_i2c_put_data(i2c, i2c->msg->buf + i2c->pos, i2c->count);
|
|
|
|
if (i2c->last && i2c->pos + i2c->count >= i2c->msg->len)
|
|
meson_i2c_add_token(i2c, TOKEN_STOP);
|
|
|
|
writel(i2c->tokens[0], i2c->regs + REG_TOK_LIST0);
|
|
writel(i2c->tokens[1], i2c->regs + REG_TOK_LIST1);
|
|
}
|
|
|
|
static irqreturn_t meson_i2c_irq(int irqno, void *dev_id)
|
|
{
|
|
struct meson_i2c *i2c = dev_id;
|
|
unsigned int ctrl;
|
|
|
|
spin_lock(&i2c->lock);
|
|
|
|
meson_i2c_reset_tokens(i2c);
|
|
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
|
|
ctrl = readl(i2c->regs + REG_CTRL);
|
|
|
|
dev_dbg(i2c->dev, "irq: state %d, pos %d, count %d, ctrl %08x\n",
|
|
i2c->state, i2c->pos, i2c->count, ctrl);
|
|
|
|
if (i2c->state == STATE_IDLE) {
|
|
spin_unlock(&i2c->lock);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if (ctrl & REG_CTRL_ERROR) {
|
|
/*
|
|
* The bit is set when the IGNORE_NAK bit is cleared
|
|
* and the device didn't respond. In this case, the
|
|
* I2C controller automatically generates a STOP
|
|
* condition.
|
|
*/
|
|
dev_dbg(i2c->dev, "error bit set\n");
|
|
i2c->error = -ENXIO;
|
|
i2c->state = STATE_IDLE;
|
|
complete(&i2c->done);
|
|
goto out;
|
|
}
|
|
|
|
if (i2c->state == STATE_READ && i2c->count)
|
|
meson_i2c_get_data(i2c, i2c->msg->buf + i2c->pos, i2c->count);
|
|
|
|
i2c->pos += i2c->count;
|
|
|
|
if (i2c->pos >= i2c->msg->len) {
|
|
i2c->state = STATE_IDLE;
|
|
complete(&i2c->done);
|
|
goto out;
|
|
}
|
|
|
|
/* Restart the processing */
|
|
meson_i2c_prepare_xfer(i2c);
|
|
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, REG_CTRL_START);
|
|
out:
|
|
spin_unlock(&i2c->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void meson_i2c_do_start(struct meson_i2c *i2c, struct i2c_msg *msg)
|
|
{
|
|
int token;
|
|
|
|
token = (msg->flags & I2C_M_RD) ? TOKEN_SLAVE_ADDR_READ :
|
|
TOKEN_SLAVE_ADDR_WRITE;
|
|
|
|
writel(msg->addr << 1, i2c->regs + REG_SLAVE_ADDR);
|
|
meson_i2c_add_token(i2c, TOKEN_START);
|
|
meson_i2c_add_token(i2c, token);
|
|
}
|
|
|
|
static int meson_i2c_xfer_msg(struct meson_i2c *i2c, struct i2c_msg *msg,
|
|
int last)
|
|
{
|
|
unsigned long time_left, flags;
|
|
int ret = 0;
|
|
|
|
i2c->msg = msg;
|
|
i2c->last = last;
|
|
i2c->pos = 0;
|
|
i2c->count = 0;
|
|
i2c->error = 0;
|
|
|
|
meson_i2c_reset_tokens(i2c);
|
|
|
|
flags = (msg->flags & I2C_M_IGNORE_NAK) ? REG_CTRL_ACK_IGNORE : 0;
|
|
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_ACK_IGNORE, flags);
|
|
|
|
if (!(msg->flags & I2C_M_NOSTART))
|
|
meson_i2c_do_start(i2c, msg);
|
|
|
|
i2c->state = (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE;
|
|
meson_i2c_prepare_xfer(i2c);
|
|
reinit_completion(&i2c->done);
|
|
|
|
/* Start the transfer */
|
|
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, REG_CTRL_START);
|
|
|
|
time_left = msecs_to_jiffies(I2C_TIMEOUT_MS);
|
|
time_left = wait_for_completion_timeout(&i2c->done, time_left);
|
|
|
|
/*
|
|
* Protect access to i2c struct and registers from interrupt
|
|
* handlers triggered by a transfer terminated after the
|
|
* timeout period
|
|
*/
|
|
spin_lock_irqsave(&i2c->lock, flags);
|
|
|
|
/* Abort any active operation */
|
|
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
|
|
|
|
if (!time_left) {
|
|
i2c->state = STATE_IDLE;
|
|
ret = -ETIMEDOUT;
|
|
}
|
|
|
|
if (i2c->error)
|
|
ret = i2c->error;
|
|
|
|
spin_unlock_irqrestore(&i2c->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int meson_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
|
|
int num)
|
|
{
|
|
struct meson_i2c *i2c = adap->algo_data;
|
|
int i, ret = 0;
|
|
|
|
clk_enable(i2c->clk);
|
|
|
|
for (i = 0; i < num; i++) {
|
|
ret = meson_i2c_xfer_msg(i2c, msgs + i, i == num - 1);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
clk_disable(i2c->clk);
|
|
|
|
return ret ?: i;
|
|
}
|
|
|
|
static u32 meson_i2c_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm meson_i2c_algorithm = {
|
|
.master_xfer = meson_i2c_xfer,
|
|
.functionality = meson_i2c_func,
|
|
};
|
|
|
|
static int meson_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct meson_i2c *i2c;
|
|
struct resource *mem;
|
|
struct i2c_timings timings;
|
|
int irq, ret = 0;
|
|
|
|
i2c = devm_kzalloc(&pdev->dev, sizeof(struct meson_i2c), GFP_KERNEL);
|
|
if (!i2c)
|
|
return -ENOMEM;
|
|
|
|
i2c_parse_fw_timings(&pdev->dev, &timings, true);
|
|
|
|
i2c->dev = &pdev->dev;
|
|
platform_set_drvdata(pdev, i2c);
|
|
|
|
spin_lock_init(&i2c->lock);
|
|
init_completion(&i2c->done);
|
|
|
|
i2c->data = (const struct meson_i2c_data *)
|
|
of_device_get_match_data(&pdev->dev);
|
|
|
|
i2c->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(i2c->clk)) {
|
|
dev_err(&pdev->dev, "can't get device clock\n");
|
|
return PTR_ERR(i2c->clk);
|
|
}
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
|
|
if (IS_ERR(i2c->regs))
|
|
return PTR_ERR(i2c->regs);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "can't find IRQ\n");
|
|
return irq;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq, meson_i2c_irq, 0, NULL, i2c);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "can't request IRQ\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare(i2c->clk);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "can't prepare clock\n");
|
|
return ret;
|
|
}
|
|
|
|
strlcpy(i2c->adap.name, "Meson I2C adapter",
|
|
sizeof(i2c->adap.name));
|
|
i2c->adap.owner = THIS_MODULE;
|
|
i2c->adap.algo = &meson_i2c_algorithm;
|
|
i2c->adap.dev.parent = &pdev->dev;
|
|
i2c->adap.dev.of_node = np;
|
|
i2c->adap.algo_data = i2c;
|
|
|
|
/*
|
|
* A transfer is triggered when START bit changes from 0 to 1.
|
|
* Ensure that the bit is set to 0 after probe
|
|
*/
|
|
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
|
|
|
|
ret = i2c_add_adapter(&i2c->adap);
|
|
if (ret < 0) {
|
|
clk_unprepare(i2c->clk);
|
|
return ret;
|
|
}
|
|
|
|
meson_i2c_set_clk_div(i2c, timings.bus_freq_hz);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct meson_i2c *i2c = platform_get_drvdata(pdev);
|
|
|
|
i2c_del_adapter(&i2c->adap);
|
|
clk_unprepare(i2c->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct meson_i2c_data i2c_meson6_data = {
|
|
.div_factor = 4,
|
|
};
|
|
|
|
static const struct meson_i2c_data i2c_gxbb_data = {
|
|
.div_factor = 4,
|
|
};
|
|
|
|
static const struct meson_i2c_data i2c_axg_data = {
|
|
.div_factor = 3,
|
|
};
|
|
|
|
static const struct of_device_id meson_i2c_match[] = {
|
|
{ .compatible = "amlogic,meson6-i2c", .data = &i2c_meson6_data },
|
|
{ .compatible = "amlogic,meson-gxbb-i2c", .data = &i2c_gxbb_data },
|
|
{ .compatible = "amlogic,meson-axg-i2c", .data = &i2c_axg_data },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, meson_i2c_match);
|
|
|
|
static struct platform_driver meson_i2c_driver = {
|
|
.probe = meson_i2c_probe,
|
|
.remove = meson_i2c_remove,
|
|
.driver = {
|
|
.name = "meson-i2c",
|
|
.of_match_table = meson_i2c_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(meson_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Amlogic Meson I2C Bus driver");
|
|
MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
|
|
MODULE_LICENSE("GPL v2");
|