WSL2-Linux-Kernel/arch/powerpc/boot/dts/tqm5200.dts

/*
 * TQM5200 board Device Tree Source
 *
 * Copyright (C) 2007 Semihalf
 * Marian Balakowicz <m8@semihalf.com>
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

/*
 * WARNING: Do not depend on this tree layout remaining static just yet.
 * The MPC5200 device tree conventions are still in flux
 * Keep an eye on the linuxppc-dev mailing list for more details
 */

/ {
	model = "tqc,tqm5200";
	compatible = "tqc,tqm5200";
	#address-cells = <1>;
	#size-cells = <1>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,5200@0 {
			device_type = "cpu";
			reg = <0>;
			d-cache-line-size = <20>;
			i-cache-line-size = <20>;
			d-cache-size = <4000>;		// L1, 16K
			i-cache-size = <4000>;		// L1, 16K
			timebase-frequency = <0>;	// from bootloader
			bus-frequency = <0>;		// from bootloader
			clock-frequency = <0>;		// from bootloader
		};
	};

	memory {
		device_type = "memory";
		reg = <00000000 04000000>;	// 64MB
	};

	soc5200@f0000000 {
		model = "fsl,mpc5200";
		compatible = "fsl,mpc5200";
		revision = "";			// from bootloader
		device_type = "soc";
		ranges = <0 f0000000 0000c000>;
		reg = <f0000000 00000100>;
		bus-frequency = <0>;		// from bootloader
		system-frequency = <0>;		// from bootloader

		cdm@200 {
			compatible = "mpc5200-cdm";
			reg = <200 38>;
		};

		mpc5200_pic: pic@500 {
			// 5200 interrupts are encoded into two levels;
			interrupt-controller;
			#interrupt-cells = <3>;
			compatible = "mpc5200-pic";
			reg = <500 80>;
		};

		gpt@600 {	// General Purpose Timer
			compatible = "fsl,mpc5200-gpt";
			reg = <600 10>;
			interrupts = <1 9 0>;
			interrupt-parent = <&mpc5200_pic>;
			fsl,has-wdt;
		};

		gpio@b00 {
			compatible = "mpc5200-gpio";
			reg = <b00 40>;
			interrupts = <1 7 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		usb@1000 {
			compatible = "mpc5200-ohci","ohci-be";
			reg = <1000 ff>;
			interrupts = <2 6 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		dma-controller@1200 {
			compatible = "mpc5200-bestcomm";
			reg = <1200 80>;
			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
			              3 4 0  3 5 0  3 6 0  3 7 0
			              3 8 0  3 9 0  3 a 0  3 b 0
			              3 c 0  3 d 0  3 e 0  3 f 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		xlb@1f00 {
			compatible = "mpc5200-xlb";
			reg = <1f00 100>;
		};

		serial@2000 {		// PSC1
			device_type = "serial";
			compatible = "mpc5200-psc-uart";
			port-number = <0>;  // Logical port assignment
			reg = <2000 100>;
			interrupts = <2 1 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		serial@2200 {		// PSC2
			device_type = "serial";
			compatible = "mpc5200-psc-uart";
			port-number = <1>;  // Logical port assignment
			reg = <2200 100>;
			interrupts = <2 2 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		serial@2400 {		// PSC3
			device_type = "serial";
			compatible = "mpc5200-psc-uart";
			port-number = <2>;  // Logical port assignment
			reg = <2400 100>;
			interrupts = <2 3 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		ethernet@3000 {
			device_type = "network";
			compatible = "mpc5200-fec";
			reg = <3000 800>;
			local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
			interrupts = <2 5 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		ata@3a00 {
			compatible = "mpc5200-ata";
			reg = <3a00 100>;
			interrupts = <2 7 0>;
			interrupt-parent = <&mpc5200_pic>;
		};

		i2c@3d40 {
			compatible = "mpc5200-i2c","fsl-i2c";
			reg = <3d40 40>;
			interrupts = <2 10 0>;
			interrupt-parent = <&mpc5200_pic>;
			fsl5200-clocking;
		};

		sram@8000 {
			compatible = "mpc5200-sram";
			reg = <8000 4000>;
		};
	};

	pci@f0000d00 {
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		compatible = "fsl,mpc5200-pci";
		reg = <f0000d00 100>;
		interrupt-map-mask = <f800 0 0 7>;
		interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3
				 c000 0 0 2 &mpc5200_pic 0 0 3
				 c000 0 0 3 &mpc5200_pic 0 0 3
				 c000 0 0 4 &mpc5200_pic 0 0 3>;
		clock-frequency = <0>; // From boot loader
		interrupts = <2 8 0 2 9 0 2 a 0>;
		interrupt-parent = <&mpc5200_pic>;
		bus-range = <0 0>;
		ranges = <42000000 0 80000000 80000000 0 10000000
			  02000000 0 90000000 90000000 0 10000000
			  01000000 0 00000000 a0000000 0 01000000>;
	};
};