7589 строки
193 KiB
C
7589 строки
193 KiB
C
/*
|
|
|
|
FlashPoint.c -- FlashPoint SCCB Manager for Linux
|
|
|
|
This file contains the FlashPoint SCCB Manager from BusLogic's FlashPoint
|
|
Driver Developer's Kit, with minor modifications by Leonard N. Zubkoff for
|
|
Linux compatibility. It was provided by BusLogic in the form of 16 separate
|
|
source files, which would have unnecessarily cluttered the scsi directory, so
|
|
the individual files have been combined into this single file.
|
|
|
|
Copyright 1995-1996 by Mylex Corporation. All Rights Reserved
|
|
|
|
This file is available under both the GNU General Public License
|
|
and a BSD-style copyright; see LICENSE.FlashPoint for details.
|
|
|
|
*/
|
|
|
|
|
|
#ifdef CONFIG_SCSI_FLASHPOINT
|
|
|
|
#define MAX_CARDS 8
|
|
#undef BUSTYPE_PCI
|
|
|
|
#define CRCMASK 0xA001
|
|
|
|
#define FAILURE 0xFFFFFFFFL
|
|
|
|
struct sccb;
|
|
typedef void (*CALL_BK_FN) (struct sccb *);
|
|
|
|
struct sccb_mgr_info {
|
|
u32 si_baseaddr;
|
|
unsigned char si_present;
|
|
unsigned char si_intvect;
|
|
unsigned char si_id;
|
|
unsigned char si_lun;
|
|
u16 si_fw_revision;
|
|
u16 si_per_targ_init_sync;
|
|
u16 si_per_targ_fast_nego;
|
|
u16 si_per_targ_ultra_nego;
|
|
u16 si_per_targ_no_disc;
|
|
u16 si_per_targ_wide_nego;
|
|
u16 si_flags;
|
|
unsigned char si_card_family;
|
|
unsigned char si_bustype;
|
|
unsigned char si_card_model[3];
|
|
unsigned char si_relative_cardnum;
|
|
unsigned char si_reserved[4];
|
|
u32 si_OS_reserved;
|
|
unsigned char si_XlatInfo[4];
|
|
u32 si_reserved2[5];
|
|
u32 si_secondary_range;
|
|
};
|
|
|
|
#define SCSI_PARITY_ENA 0x0001
|
|
#define LOW_BYTE_TERM 0x0010
|
|
#define HIGH_BYTE_TERM 0x0020
|
|
#define BUSTYPE_PCI 0x3
|
|
|
|
#define SUPPORT_16TAR_32LUN 0x0002
|
|
#define SOFT_RESET 0x0004
|
|
#define EXTENDED_TRANSLATION 0x0008
|
|
#define POST_ALL_UNDERRRUNS 0x0040
|
|
#define FLAG_SCAM_ENABLED 0x0080
|
|
#define FLAG_SCAM_LEVEL2 0x0100
|
|
|
|
#define HARPOON_FAMILY 0x02
|
|
|
|
/* SCCB struct used for both SCCB and UCB manager compiles!
|
|
* The UCB Manager treats the SCCB as it's 'native hardware structure'
|
|
*/
|
|
|
|
/*#pragma pack(1)*/
|
|
struct sccb {
|
|
unsigned char OperationCode;
|
|
unsigned char ControlByte;
|
|
unsigned char CdbLength;
|
|
unsigned char RequestSenseLength;
|
|
u32 DataLength;
|
|
void *DataPointer;
|
|
unsigned char CcbRes[2];
|
|
unsigned char HostStatus;
|
|
unsigned char TargetStatus;
|
|
unsigned char TargID;
|
|
unsigned char Lun;
|
|
unsigned char Cdb[12];
|
|
unsigned char CcbRes1;
|
|
unsigned char Reserved1;
|
|
u32 Reserved2;
|
|
u32 SensePointer;
|
|
|
|
CALL_BK_FN SccbCallback; /* VOID (*SccbCallback)(); */
|
|
u32 SccbIOPort; /* Identifies board base port */
|
|
unsigned char SccbStatus;
|
|
unsigned char SCCBRes2;
|
|
u16 SccbOSFlags;
|
|
|
|
u32 Sccb_XferCnt; /* actual transfer count */
|
|
u32 Sccb_ATC;
|
|
u32 SccbVirtDataPtr; /* virtual addr for OS/2 */
|
|
u32 Sccb_res1;
|
|
u16 Sccb_MGRFlags;
|
|
u16 Sccb_sgseg;
|
|
unsigned char Sccb_scsimsg; /* identify msg for selection */
|
|
unsigned char Sccb_tag;
|
|
unsigned char Sccb_scsistat;
|
|
unsigned char Sccb_idmsg; /* image of last msg in */
|
|
struct sccb *Sccb_forwardlink;
|
|
struct sccb *Sccb_backlink;
|
|
u32 Sccb_savedATC;
|
|
unsigned char Save_Cdb[6];
|
|
unsigned char Save_CdbLen;
|
|
unsigned char Sccb_XferState;
|
|
u32 Sccb_SGoffset;
|
|
};
|
|
|
|
#pragma pack()
|
|
|
|
#define SCATTER_GATHER_COMMAND 0x02
|
|
#define RESIDUAL_COMMAND 0x03
|
|
#define RESIDUAL_SG_COMMAND 0x04
|
|
#define RESET_COMMAND 0x81
|
|
|
|
#define F_USE_CMD_Q 0x20 /*Inidcates TAGGED command. */
|
|
#define TAG_TYPE_MASK 0xC0 /*Type of tag msg to send. */
|
|
#define SCCB_DATA_XFER_OUT 0x10 /* Write */
|
|
#define SCCB_DATA_XFER_IN 0x08 /* Read */
|
|
|
|
#define NO_AUTO_REQUEST_SENSE 0x01 /* No Request Sense Buffer */
|
|
|
|
#define BUS_FREE_ST 0
|
|
#define SELECT_ST 1
|
|
#define SELECT_BDR_ST 2 /* Select w\ Bus Device Reset */
|
|
#define SELECT_SN_ST 3 /* Select w\ Sync Nego */
|
|
#define SELECT_WN_ST 4 /* Select w\ Wide Data Nego */
|
|
#define SELECT_Q_ST 5 /* Select w\ Tagged Q'ing */
|
|
#define COMMAND_ST 6
|
|
#define DATA_OUT_ST 7
|
|
#define DATA_IN_ST 8
|
|
#define DISCONNECT_ST 9
|
|
#define ABORT_ST 11
|
|
|
|
#define F_HOST_XFER_DIR 0x01
|
|
#define F_ALL_XFERRED 0x02
|
|
#define F_SG_XFER 0x04
|
|
#define F_AUTO_SENSE 0x08
|
|
#define F_ODD_BALL_CNT 0x10
|
|
#define F_NO_DATA_YET 0x80
|
|
|
|
#define F_STATUSLOADED 0x01
|
|
#define F_DEV_SELECTED 0x04
|
|
|
|
#define SCCB_COMPLETE 0x00 /* SCCB completed without error */
|
|
#define SCCB_DATA_UNDER_RUN 0x0C
|
|
#define SCCB_SELECTION_TIMEOUT 0x11 /* Set SCSI selection timed out */
|
|
#define SCCB_DATA_OVER_RUN 0x12
|
|
#define SCCB_PHASE_SEQUENCE_FAIL 0x14 /* Target bus phase sequence failure */
|
|
|
|
#define SCCB_GROSS_FW_ERR 0x27 /* Major problem! */
|
|
#define SCCB_BM_ERR 0x30 /* BusMaster error. */
|
|
#define SCCB_PARITY_ERR 0x34 /* SCSI parity error */
|
|
|
|
#define SCCB_IN_PROCESS 0x00
|
|
#define SCCB_SUCCESS 0x01
|
|
#define SCCB_ABORT 0x02
|
|
#define SCCB_ERROR 0x04
|
|
|
|
#define ORION_FW_REV 3110
|
|
|
|
#define QUEUE_DEPTH 254+1 /*1 for Normal disconnect 32 for Q'ing. */
|
|
|
|
#define MAX_MB_CARDS 4 /* Max. no of cards suppoerted on Mother Board */
|
|
|
|
#define MAX_SCSI_TAR 16
|
|
#define MAX_LUN 32
|
|
#define LUN_MASK 0x1f
|
|
|
|
#define SG_BUF_CNT 16 /*Number of prefetched elements. */
|
|
|
|
#define SG_ELEMENT_SIZE 8 /*Eight byte per element. */
|
|
|
|
#define RD_HARPOON(ioport) inb((u32)ioport)
|
|
#define RDW_HARPOON(ioport) inw((u32)ioport)
|
|
#define RD_HARP32(ioport,offset,data) (data = inl((u32)(ioport + offset)))
|
|
#define WR_HARPOON(ioport,val) outb((u8) val, (u32)ioport)
|
|
#define WRW_HARPOON(ioport,val) outw((u16)val, (u32)ioport)
|
|
#define WR_HARP32(ioport,offset,data) outl(data, (u32)(ioport + offset))
|
|
|
|
#define TAR_SYNC_MASK (BIT(7)+BIT(6))
|
|
#define SYNC_TRYING BIT(6)
|
|
#define SYNC_SUPPORTED (BIT(7)+BIT(6))
|
|
|
|
#define TAR_WIDE_MASK (BIT(5)+BIT(4))
|
|
#define WIDE_ENABLED BIT(4)
|
|
#define WIDE_NEGOCIATED BIT(5)
|
|
|
|
#define TAR_TAG_Q_MASK (BIT(3)+BIT(2))
|
|
#define TAG_Q_TRYING BIT(2)
|
|
#define TAG_Q_REJECT BIT(3)
|
|
|
|
#define TAR_ALLOW_DISC BIT(0)
|
|
|
|
#define EE_SYNC_MASK (BIT(0)+BIT(1))
|
|
#define EE_SYNC_5MB BIT(0)
|
|
#define EE_SYNC_10MB BIT(1)
|
|
#define EE_SYNC_20MB (BIT(0)+BIT(1))
|
|
|
|
#define EE_WIDE_SCSI BIT(7)
|
|
|
|
struct sccb_mgr_tar_info {
|
|
|
|
struct sccb *TarSelQ_Head;
|
|
struct sccb *TarSelQ_Tail;
|
|
unsigned char TarLUN_CA; /*Contingent Allgiance */
|
|
unsigned char TarTagQ_Cnt;
|
|
unsigned char TarSelQ_Cnt;
|
|
unsigned char TarStatus;
|
|
unsigned char TarEEValue;
|
|
unsigned char TarSyncCtrl;
|
|
unsigned char TarReserved[2]; /* for alignment */
|
|
unsigned char LunDiscQ_Idx[MAX_LUN];
|
|
unsigned char TarLUNBusy[MAX_LUN];
|
|
};
|
|
|
|
struct nvram_info {
|
|
unsigned char niModel; /* Model No. of card */
|
|
unsigned char niCardNo; /* Card no. */
|
|
u32 niBaseAddr; /* Port Address of card */
|
|
unsigned char niSysConf; /* Adapter Configuration byte -
|
|
Byte 16 of eeprom map */
|
|
unsigned char niScsiConf; /* SCSI Configuration byte -
|
|
Byte 17 of eeprom map */
|
|
unsigned char niScamConf; /* SCAM Configuration byte -
|
|
Byte 20 of eeprom map */
|
|
unsigned char niAdapId; /* Host Adapter ID -
|
|
Byte 24 of eerpom map */
|
|
unsigned char niSyncTbl[MAX_SCSI_TAR / 2]; /* Sync/Wide byte
|
|
of targets */
|
|
unsigned char niScamTbl[MAX_SCSI_TAR][4]; /* Compressed Scam name
|
|
string of Targets */
|
|
};
|
|
|
|
#define MODEL_LT 1
|
|
#define MODEL_DL 2
|
|
#define MODEL_LW 3
|
|
#define MODEL_DW 4
|
|
|
|
struct sccb_card {
|
|
struct sccb *currentSCCB;
|
|
struct sccb_mgr_info *cardInfo;
|
|
|
|
u32 ioPort;
|
|
|
|
unsigned short cmdCounter;
|
|
unsigned char discQCount;
|
|
unsigned char tagQ_Lst;
|
|
unsigned char cardIndex;
|
|
unsigned char scanIndex;
|
|
unsigned char globalFlags;
|
|
unsigned char ourId;
|
|
struct nvram_info *pNvRamInfo;
|
|
struct sccb *discQ_Tbl[QUEUE_DEPTH];
|
|
|
|
};
|
|
|
|
#define F_TAG_STARTED 0x01
|
|
#define F_CONLUN_IO 0x02
|
|
#define F_DO_RENEGO 0x04
|
|
#define F_NO_FILTER 0x08
|
|
#define F_GREEN_PC 0x10
|
|
#define F_HOST_XFER_ACT 0x20
|
|
#define F_NEW_SCCB_CMD 0x40
|
|
#define F_UPDATE_EEPROM 0x80
|
|
|
|
#define ID_STRING_LENGTH 32
|
|
#define TYPE_CODE0 0x63 /*Level2 Mstr (bits 7-6), */
|
|
|
|
#define SLV_TYPE_CODE0 0xA3 /*Priority Bit set (bits 7-6), */
|
|
|
|
#define ASSIGN_ID 0x00
|
|
#define SET_P_FLAG 0x01
|
|
#define CFG_CMPLT 0x03
|
|
#define DOM_MSTR 0x0F
|
|
#define SYNC_PTRN 0x1F
|
|
|
|
#define ID_0_7 0x18
|
|
#define ID_8_F 0x11
|
|
#define MISC_CODE 0x14
|
|
#define CLR_P_FLAG 0x18
|
|
|
|
#define INIT_SELTD 0x01
|
|
#define LEVEL2_TAR 0x02
|
|
|
|
enum scam_id_st { ID0, ID1, ID2, ID3, ID4, ID5, ID6, ID7, ID8, ID9, ID10, ID11,
|
|
ID12,
|
|
ID13, ID14, ID15, ID_UNUSED, ID_UNASSIGNED, ID_ASSIGNED, LEGACY,
|
|
CLR_PRIORITY, NO_ID_AVAIL
|
|
};
|
|
|
|
typedef struct SCCBscam_info {
|
|
|
|
unsigned char id_string[ID_STRING_LENGTH];
|
|
enum scam_id_st state;
|
|
|
|
} SCCBSCAM_INFO;
|
|
|
|
#define SCSI_REQUEST_SENSE 0x03
|
|
#define SCSI_READ 0x08
|
|
#define SCSI_WRITE 0x0A
|
|
#define SCSI_START_STOP_UNIT 0x1B
|
|
#define SCSI_READ_EXTENDED 0x28
|
|
#define SCSI_WRITE_EXTENDED 0x2A
|
|
#define SCSI_WRITE_AND_VERIFY 0x2E
|
|
|
|
#define SSGOOD 0x00
|
|
#define SSCHECK 0x02
|
|
#define SSQ_FULL 0x28
|
|
|
|
#define SMCMD_COMP 0x00
|
|
#define SMEXT 0x01
|
|
#define SMSAVE_DATA_PTR 0x02
|
|
#define SMREST_DATA_PTR 0x03
|
|
#define SMDISC 0x04
|
|
#define SMABORT 0x06
|
|
#define SMREJECT 0x07
|
|
#define SMNO_OP 0x08
|
|
#define SMPARITY 0x09
|
|
#define SMDEV_RESET 0x0C
|
|
#define SMABORT_TAG 0x0D
|
|
#define SMINIT_RECOVERY 0x0F
|
|
#define SMREL_RECOVERY 0x10
|
|
|
|
#define SMIDENT 0x80
|
|
#define DISC_PRIV 0x40
|
|
|
|
#define SMSYNC 0x01
|
|
#define SMWDTR 0x03
|
|
#define SM8BIT 0x00
|
|
#define SM16BIT 0x01
|
|
#define SMIGNORWR 0x23 /* Ignore Wide Residue */
|
|
|
|
#define SIX_BYTE_CMD 0x06
|
|
#define TWELVE_BYTE_CMD 0x0C
|
|
|
|
#define ASYNC 0x00
|
|
#define MAX_OFFSET 0x0F /* Maxbyteoffset for Sync Xfers */
|
|
|
|
#define EEPROM_WD_CNT 256
|
|
|
|
#define EEPROM_CHECK_SUM 0
|
|
#define FW_SIGNATURE 2
|
|
#define MODEL_NUMB_0 4
|
|
#define MODEL_NUMB_2 6
|
|
#define MODEL_NUMB_4 8
|
|
#define SYSTEM_CONFIG 16
|
|
#define SCSI_CONFIG 17
|
|
#define BIOS_CONFIG 18
|
|
#define SCAM_CONFIG 20
|
|
#define ADAPTER_SCSI_ID 24
|
|
|
|
#define IGNORE_B_SCAN 32
|
|
#define SEND_START_ENA 34
|
|
#define DEVICE_ENABLE 36
|
|
|
|
#define SYNC_RATE_TBL 38
|
|
#define SYNC_RATE_TBL01 38
|
|
#define SYNC_RATE_TBL23 40
|
|
#define SYNC_RATE_TBL45 42
|
|
#define SYNC_RATE_TBL67 44
|
|
#define SYNC_RATE_TBL89 46
|
|
#define SYNC_RATE_TBLab 48
|
|
#define SYNC_RATE_TBLcd 50
|
|
#define SYNC_RATE_TBLef 52
|
|
|
|
#define EE_SCAMBASE 256
|
|
|
|
#define SCAM_ENABLED BIT(2)
|
|
#define SCAM_LEVEL2 BIT(3)
|
|
|
|
#define RENEGO_ENA BIT(10)
|
|
#define CONNIO_ENA BIT(11)
|
|
#define GREEN_PC_ENA BIT(12)
|
|
|
|
#define AUTO_RATE_00 00
|
|
#define AUTO_RATE_05 01
|
|
#define AUTO_RATE_10 02
|
|
#define AUTO_RATE_20 03
|
|
|
|
#define WIDE_NEGO_BIT BIT(7)
|
|
#define DISC_ENABLE_BIT BIT(6)
|
|
|
|
#define hp_vendor_id_0 0x00 /* LSB */
|
|
#define ORION_VEND_0 0x4B
|
|
|
|
#define hp_vendor_id_1 0x01 /* MSB */
|
|
#define ORION_VEND_1 0x10
|
|
|
|
#define hp_device_id_0 0x02 /* LSB */
|
|
#define ORION_DEV_0 0x30
|
|
|
|
#define hp_device_id_1 0x03 /* MSB */
|
|
#define ORION_DEV_1 0x81
|
|
|
|
/* Sub Vendor ID and Sub Device ID only available in
|
|
Harpoon Version 2 and higher */
|
|
|
|
#define hp_sub_device_id_0 0x06 /* LSB */
|
|
|
|
#define hp_semaphore 0x0C
|
|
#define SCCB_MGR_ACTIVE BIT(0)
|
|
#define TICKLE_ME BIT(1)
|
|
#define SCCB_MGR_PRESENT BIT(3)
|
|
#define BIOS_IN_USE BIT(4)
|
|
|
|
#define hp_sys_ctrl 0x0F
|
|
|
|
#define STOP_CLK BIT(0) /*Turn off BusMaster Clock */
|
|
#define DRVR_RST BIT(1) /*Firmware Reset to 80C15 chip */
|
|
#define HALT_MACH BIT(3) /*Halt State Machine */
|
|
#define HARD_ABORT BIT(4) /*Hard Abort */
|
|
|
|
#define hp_host_blk_cnt 0x13
|
|
|
|
#define XFER_BLK64 0x06 /* 1 1 0 64 byte per block */
|
|
|
|
#define BM_THRESHOLD 0x40 /* PCI mode can only xfer 16 bytes */
|
|
|
|
#define hp_int_mask 0x17
|
|
|
|
#define INT_CMD_COMPL BIT(0) /* DMA command complete */
|
|
#define INT_EXT_STATUS BIT(1) /* Extended Status Set */
|
|
|
|
#define hp_xfer_cnt_lo 0x18
|
|
#define hp_xfer_cnt_hi 0x1A
|
|
#define hp_xfer_cmd 0x1B
|
|
|
|
#define XFER_HOST_DMA 0x00 /* 0 0 0 Transfer Host -> DMA */
|
|
#define XFER_DMA_HOST 0x01 /* 0 0 1 Transfer DMA -> Host */
|
|
|
|
#define XFER_HOST_AUTO 0x00 /* 0 0 Auto Transfer Size */
|
|
|
|
#define XFER_DMA_8BIT 0x20 /* 0 1 8 BIT Transfer Size */
|
|
|
|
#define DISABLE_INT BIT(7) /*Do not interrupt at end of cmd. */
|
|
|
|
#define HOST_WRT_CMD ((DISABLE_INT + XFER_HOST_DMA + XFER_HOST_AUTO + XFER_DMA_8BIT))
|
|
#define HOST_RD_CMD ((DISABLE_INT + XFER_DMA_HOST + XFER_HOST_AUTO + XFER_DMA_8BIT))
|
|
|
|
#define hp_host_addr_lo 0x1C
|
|
#define hp_host_addr_hmi 0x1E
|
|
|
|
#define hp_ee_ctrl 0x22
|
|
|
|
#define EXT_ARB_ACK BIT(7)
|
|
#define SCSI_TERM_ENA_H BIT(6) /* SCSI high byte terminator */
|
|
#define SEE_MS BIT(5)
|
|
#define SEE_CS BIT(3)
|
|
#define SEE_CLK BIT(2)
|
|
#define SEE_DO BIT(1)
|
|
#define SEE_DI BIT(0)
|
|
|
|
#define EE_READ 0x06
|
|
#define EE_WRITE 0x05
|
|
#define EWEN 0x04
|
|
#define EWEN_ADDR 0x03C0
|
|
#define EWDS 0x04
|
|
#define EWDS_ADDR 0x0000
|
|
|
|
#define hp_bm_ctrl 0x26
|
|
|
|
#define SCSI_TERM_ENA_L BIT(0) /*Enable/Disable external terminators */
|
|
#define FLUSH_XFER_CNTR BIT(1) /*Flush transfer counter */
|
|
#define FORCE1_XFER BIT(5) /*Always xfer one byte in byte mode */
|
|
#define FAST_SINGLE BIT(6) /*?? */
|
|
|
|
#define BMCTRL_DEFAULT (FORCE1_XFER|FAST_SINGLE|SCSI_TERM_ENA_L)
|
|
|
|
#define hp_sg_addr 0x28
|
|
#define hp_page_ctrl 0x29
|
|
|
|
#define SCATTER_EN BIT(0)
|
|
#define SGRAM_ARAM BIT(1)
|
|
#define G_INT_DISABLE BIT(3) /* Enable/Disable all Interrupts */
|
|
#define NARROW_SCSI_CARD BIT(4) /* NARROW/WIDE SCSI config pin */
|
|
|
|
#define hp_pci_stat_cfg 0x2D
|
|
|
|
#define REC_MASTER_ABORT BIT(5) /*received Master abort */
|
|
|
|
#define hp_rev_num 0x33
|
|
|
|
#define hp_stack_data 0x34
|
|
#define hp_stack_addr 0x35
|
|
|
|
#define hp_ext_status 0x36
|
|
|
|
#define BM_FORCE_OFF BIT(0) /*Bus Master is forced to get off */
|
|
#define PCI_TGT_ABORT BIT(0) /*PCI bus master transaction aborted */
|
|
#define PCI_DEV_TMOUT BIT(1) /*PCI Device Time out */
|
|
#define CMD_ABORTED BIT(4) /*Command aborted */
|
|
#define BM_PARITY_ERR BIT(5) /*parity error on data received */
|
|
#define PIO_OVERRUN BIT(6) /*Slave data overrun */
|
|
#define BM_CMD_BUSY BIT(7) /*Bus master transfer command busy */
|
|
#define BAD_EXT_STATUS (BM_FORCE_OFF | PCI_DEV_TMOUT | CMD_ABORTED | \
|
|
BM_PARITY_ERR | PIO_OVERRUN)
|
|
|
|
#define hp_int_status 0x37
|
|
|
|
#define EXT_STATUS_ON BIT(1) /*Extended status is valid */
|
|
#define SCSI_INTERRUPT BIT(2) /*Global indication of a SCSI int. */
|
|
#define INT_ASSERTED BIT(5) /* */
|
|
|
|
#define hp_fifo_cnt 0x38
|
|
|
|
#define hp_intena 0x40
|
|
|
|
#define RESET BIT(7)
|
|
#define PROG_HLT BIT(6)
|
|
#define PARITY BIT(5)
|
|
#define FIFO BIT(4)
|
|
#define SEL BIT(3)
|
|
#define SCAM_SEL BIT(2)
|
|
#define RSEL BIT(1)
|
|
#define TIMEOUT BIT(0)
|
|
#define BUS_FREE BIT(15)
|
|
#define XFER_CNT_0 BIT(14)
|
|
#define PHASE BIT(13)
|
|
#define IUNKWN BIT(12)
|
|
#define ICMD_COMP BIT(11)
|
|
#define ITICKLE BIT(10)
|
|
#define IDO_STRT BIT(9)
|
|
#define ITAR_DISC BIT(8)
|
|
#define AUTO_INT (BIT(12)+BIT(11)+BIT(10)+BIT(9)+BIT(8))
|
|
#define CLR_ALL_INT 0xFFFF
|
|
#define CLR_ALL_INT_1 0xFF00
|
|
|
|
#define hp_intstat 0x42
|
|
|
|
#define hp_scsisig 0x44
|
|
|
|
#define SCSI_SEL BIT(7)
|
|
#define SCSI_BSY BIT(6)
|
|
#define SCSI_REQ BIT(5)
|
|
#define SCSI_ACK BIT(4)
|
|
#define SCSI_ATN BIT(3)
|
|
#define SCSI_CD BIT(2)
|
|
#define SCSI_MSG BIT(1)
|
|
#define SCSI_IOBIT BIT(0)
|
|
|
|
#define S_SCSI_PHZ (BIT(2)+BIT(1)+BIT(0))
|
|
#define S_MSGO_PH (BIT(2)+BIT(1) )
|
|
#define S_MSGI_PH (BIT(2)+BIT(1)+BIT(0))
|
|
#define S_DATAI_PH ( BIT(0))
|
|
#define S_DATAO_PH 0x00
|
|
#define S_ILL_PH ( BIT(1) )
|
|
|
|
#define hp_scsictrl_0 0x45
|
|
|
|
#define SEL_TAR BIT(6)
|
|
#define ENA_ATN BIT(4)
|
|
#define ENA_RESEL BIT(2)
|
|
#define SCSI_RST BIT(1)
|
|
#define ENA_SCAM_SEL BIT(0)
|
|
|
|
#define hp_portctrl_0 0x46
|
|
|
|
#define SCSI_PORT BIT(7)
|
|
#define SCSI_INBIT BIT(6)
|
|
#define DMA_PORT BIT(5)
|
|
#define DMA_RD BIT(4)
|
|
#define HOST_PORT BIT(3)
|
|
#define HOST_WRT BIT(2)
|
|
#define SCSI_BUS_EN BIT(1)
|
|
#define START_TO BIT(0)
|
|
|
|
#define hp_scsireset 0x47
|
|
|
|
#define SCSI_INI BIT(6)
|
|
#define SCAM_EN BIT(5)
|
|
#define DMA_RESET BIT(3)
|
|
#define HPSCSI_RESET BIT(2)
|
|
#define PROG_RESET BIT(1)
|
|
#define FIFO_CLR BIT(0)
|
|
|
|
#define hp_xfercnt_0 0x48
|
|
#define hp_xfercnt_2 0x4A
|
|
|
|
#define hp_fifodata_0 0x4C
|
|
#define hp_addstat 0x4E
|
|
|
|
#define SCAM_TIMER BIT(7)
|
|
#define SCSI_MODE8 BIT(3)
|
|
#define SCSI_PAR_ERR BIT(0)
|
|
|
|
#define hp_prgmcnt_0 0x4F
|
|
|
|
#define hp_selfid_0 0x50
|
|
#define hp_selfid_1 0x51
|
|
#define hp_arb_id 0x52
|
|
|
|
#define hp_select_id 0x53
|
|
|
|
#define hp_synctarg_base 0x54
|
|
#define hp_synctarg_12 0x54
|
|
#define hp_synctarg_13 0x55
|
|
#define hp_synctarg_14 0x56
|
|
#define hp_synctarg_15 0x57
|
|
|
|
#define hp_synctarg_8 0x58
|
|
#define hp_synctarg_9 0x59
|
|
#define hp_synctarg_10 0x5A
|
|
#define hp_synctarg_11 0x5B
|
|
|
|
#define hp_synctarg_4 0x5C
|
|
#define hp_synctarg_5 0x5D
|
|
#define hp_synctarg_6 0x5E
|
|
#define hp_synctarg_7 0x5F
|
|
|
|
#define hp_synctarg_0 0x60
|
|
#define hp_synctarg_1 0x61
|
|
#define hp_synctarg_2 0x62
|
|
#define hp_synctarg_3 0x63
|
|
|
|
#define NARROW_SCSI BIT(4)
|
|
#define DEFAULT_OFFSET 0x0F
|
|
|
|
#define hp_autostart_0 0x64
|
|
#define hp_autostart_1 0x65
|
|
#define hp_autostart_3 0x67
|
|
|
|
#define AUTO_IMMED BIT(5)
|
|
#define SELECT BIT(6)
|
|
#define END_DATA (BIT(7)+BIT(6))
|
|
|
|
#define hp_gp_reg_0 0x68
|
|
#define hp_gp_reg_1 0x69
|
|
#define hp_gp_reg_3 0x6B
|
|
|
|
#define hp_seltimeout 0x6C
|
|
|
|
#define TO_4ms 0x67 /* 3.9959ms */
|
|
|
|
#define TO_5ms 0x03 /* 4.9152ms */
|
|
#define TO_10ms 0x07 /* 11.xxxms */
|
|
#define TO_250ms 0x99 /* 250.68ms */
|
|
#define TO_290ms 0xB1 /* 289.99ms */
|
|
|
|
#define hp_clkctrl_0 0x6D
|
|
|
|
#define PWR_DWN BIT(6)
|
|
#define ACTdeassert BIT(4)
|
|
#define CLK_40MHZ (BIT(1) + BIT(0))
|
|
|
|
#define CLKCTRL_DEFAULT (ACTdeassert | CLK_40MHZ)
|
|
|
|
#define hp_fiforead 0x6E
|
|
#define hp_fifowrite 0x6F
|
|
|
|
#define hp_offsetctr 0x70
|
|
#define hp_xferstat 0x71
|
|
|
|
#define FIFO_EMPTY BIT(6)
|
|
|
|
#define hp_portctrl_1 0x72
|
|
|
|
#define CHK_SCSI_P BIT(3)
|
|
#define HOST_MODE8 BIT(0)
|
|
|
|
#define hp_xfer_pad 0x73
|
|
|
|
#define ID_UNLOCK BIT(3)
|
|
|
|
#define hp_scsidata_0 0x74
|
|
#define hp_scsidata_1 0x75
|
|
|
|
#define hp_aramBase 0x80
|
|
#define BIOS_DATA_OFFSET 0x60
|
|
#define BIOS_RELATIVE_CARD 0x64
|
|
|
|
#define AR3 (BIT(9) + BIT(8))
|
|
#define SDATA BIT(10)
|
|
|
|
#define CRD_OP BIT(11) /* Cmp Reg. w/ Data */
|
|
|
|
#define CRR_OP BIT(12) /* Cmp Reg. w. Reg. */
|
|
|
|
#define CPE_OP (BIT(14)+BIT(11)) /* Cmp SCSI phs & Branch EQ */
|
|
|
|
#define CPN_OP (BIT(14)+BIT(12)) /* Cmp SCSI phs & Branch NOT EQ */
|
|
|
|
#define ADATA_OUT 0x00
|
|
#define ADATA_IN BIT(8)
|
|
#define ACOMMAND BIT(10)
|
|
#define ASTATUS (BIT(10)+BIT(8))
|
|
#define AMSG_OUT (BIT(10)+BIT(9))
|
|
#define AMSG_IN (BIT(10)+BIT(9)+BIT(8))
|
|
|
|
#define BRH_OP BIT(13) /* Branch */
|
|
|
|
#define ALWAYS 0x00
|
|
#define EQUAL BIT(8)
|
|
#define NOT_EQ BIT(9)
|
|
|
|
#define TCB_OP (BIT(13)+BIT(11)) /* Test condition & branch */
|
|
|
|
#define FIFO_0 BIT(10)
|
|
|
|
#define MPM_OP BIT(15) /* Match phase and move data */
|
|
|
|
#define MRR_OP BIT(14) /* Move DReg. to Reg. */
|
|
|
|
#define S_IDREG (BIT(2)+BIT(1)+BIT(0))
|
|
|
|
#define D_AR0 0x00
|
|
#define D_AR1 BIT(0)
|
|
#define D_BUCKET (BIT(2) + BIT(1) + BIT(0))
|
|
|
|
#define RAT_OP (BIT(14)+BIT(13)+BIT(11))
|
|
|
|
#define SSI_OP (BIT(15)+BIT(11))
|
|
|
|
#define SSI_ITAR_DISC (ITAR_DISC >> 8)
|
|
#define SSI_IDO_STRT (IDO_STRT >> 8)
|
|
|
|
#define SSI_ICMD_COMP (ICMD_COMP >> 8)
|
|
#define SSI_ITICKLE (ITICKLE >> 8)
|
|
|
|
#define SSI_IUNKWN (IUNKWN >> 8)
|
|
#define SSI_INO_CC (IUNKWN >> 8)
|
|
#define SSI_IRFAIL (IUNKWN >> 8)
|
|
|
|
#define NP 0x10 /*Next Phase */
|
|
#define NTCMD 0x02 /*Non- Tagged Command start */
|
|
#define CMDPZ 0x04 /*Command phase */
|
|
#define DINT 0x12 /*Data Out/In interrupt */
|
|
#define DI 0x13 /*Data Out */
|
|
#define DC 0x19 /*Disconnect Message */
|
|
#define ST 0x1D /*Status Phase */
|
|
#define UNKNWN 0x24 /*Unknown bus action */
|
|
#define CC 0x25 /*Command Completion failure */
|
|
#define TICK 0x26 /*New target reselected us. */
|
|
#define SELCHK 0x28 /*Select & Check SCSI ID latch reg */
|
|
|
|
#define ID_MSG_STRT hp_aramBase + 0x00
|
|
#define NON_TAG_ID_MSG hp_aramBase + 0x06
|
|
#define CMD_STRT hp_aramBase + 0x08
|
|
#define SYNC_MSGS hp_aramBase + 0x08
|
|
|
|
#define TAG_STRT 0x00
|
|
#define DISCONNECT_START 0x10/2
|
|
#define END_DATA_START 0x14/2
|
|
#define CMD_ONLY_STRT CMDPZ/2
|
|
#define SELCHK_STRT SELCHK/2
|
|
|
|
#define GET_XFER_CNT(port, xfercnt) {RD_HARP32(port,hp_xfercnt_0,xfercnt); xfercnt &= 0xFFFFFF;}
|
|
/* #define GET_XFER_CNT(port, xfercnt) (xfercnt = RD_HARPOON(port+hp_xfercnt_2), \
|
|
xfercnt <<= 16,\
|
|
xfercnt |= RDW_HARPOON((unsigned short)(port+hp_xfercnt_0)))
|
|
*/
|
|
#define HP_SETUP_ADDR_CNT(port,addr,count) (WRW_HARPOON((port+hp_host_addr_lo), (unsigned short)(addr & 0x0000FFFFL)),\
|
|
addr >>= 16,\
|
|
WRW_HARPOON((port+hp_host_addr_hmi), (unsigned short)(addr & 0x0000FFFFL)),\
|
|
WR_HARP32(port,hp_xfercnt_0,count),\
|
|
WRW_HARPOON((port+hp_xfer_cnt_lo), (unsigned short)(count & 0x0000FFFFL)),\
|
|
count >>= 16,\
|
|
WR_HARPOON(port+hp_xfer_cnt_hi, (count & 0xFF)))
|
|
|
|
#define ACCEPT_MSG(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\
|
|
WR_HARPOON(port+hp_scsisig, S_ILL_PH);}
|
|
|
|
#define ACCEPT_MSG_ATN(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\
|
|
WR_HARPOON(port+hp_scsisig, (S_ILL_PH|SCSI_ATN));}
|
|
|
|
#define DISABLE_AUTO(port) (WR_HARPOON(port+hp_scsireset, PROG_RESET),\
|
|
WR_HARPOON(port+hp_scsireset, 0x00))
|
|
|
|
#define ARAM_ACCESS(p_port) (WR_HARPOON(p_port+hp_page_ctrl, \
|
|
(RD_HARPOON(p_port+hp_page_ctrl) | SGRAM_ARAM)))
|
|
|
|
#define SGRAM_ACCESS(p_port) (WR_HARPOON(p_port+hp_page_ctrl, \
|
|
(RD_HARPOON(p_port+hp_page_ctrl) & ~SGRAM_ARAM)))
|
|
|
|
#define MDISABLE_INT(p_port) (WR_HARPOON(p_port+hp_page_ctrl, \
|
|
(RD_HARPOON(p_port+hp_page_ctrl) | G_INT_DISABLE)))
|
|
|
|
#define MENABLE_INT(p_port) (WR_HARPOON(p_port+hp_page_ctrl, \
|
|
(RD_HARPOON(p_port+hp_page_ctrl) & ~G_INT_DISABLE)))
|
|
|
|
static unsigned char FPT_sisyncn(u32 port, unsigned char p_card,
|
|
unsigned char syncFlag);
|
|
static void FPT_ssel(u32 port, unsigned char p_card);
|
|
static void FPT_sres(u32 port, unsigned char p_card,
|
|
struct sccb_card *pCurrCard);
|
|
static void FPT_shandem(u32 port, unsigned char p_card,
|
|
struct sccb *pCurrSCCB);
|
|
static void FPT_stsyncn(u32 port, unsigned char p_card);
|
|
static void FPT_sisyncr(u32 port, unsigned char sync_pulse,
|
|
unsigned char offset);
|
|
static void FPT_sssyncv(u32 p_port, unsigned char p_id,
|
|
unsigned char p_sync_value,
|
|
struct sccb_mgr_tar_info *currTar_Info);
|
|
static void FPT_sresb(u32 port, unsigned char p_card);
|
|
static void FPT_sxfrp(u32 p_port, unsigned char p_card);
|
|
static void FPT_schkdd(u32 port, unsigned char p_card);
|
|
static unsigned char FPT_RdStack(u32 port, unsigned char index);
|
|
static void FPT_WrStack(u32 portBase, unsigned char index,
|
|
unsigned char data);
|
|
static unsigned char FPT_ChkIfChipInitialized(u32 ioPort);
|
|
|
|
static void FPT_SendMsg(u32 port, unsigned char message);
|
|
static void FPT_queueFlushTargSccb(unsigned char p_card, unsigned char thisTarg,
|
|
unsigned char error_code);
|
|
|
|
static void FPT_sinits(struct sccb *p_sccb, unsigned char p_card);
|
|
static void FPT_RNVRamData(struct nvram_info *pNvRamInfo);
|
|
|
|
static unsigned char FPT_siwidn(u32 port, unsigned char p_card);
|
|
static void FPT_stwidn(u32 port, unsigned char p_card);
|
|
static void FPT_siwidr(u32 port, unsigned char width);
|
|
|
|
static void FPT_queueSelectFail(struct sccb_card *pCurrCard,
|
|
unsigned char p_card);
|
|
static void FPT_queueDisconnect(struct sccb *p_SCCB, unsigned char p_card);
|
|
static void FPT_queueCmdComplete(struct sccb_card *pCurrCard,
|
|
struct sccb *p_SCCB, unsigned char p_card);
|
|
static void FPT_queueSearchSelect(struct sccb_card *pCurrCard,
|
|
unsigned char p_card);
|
|
static void FPT_queueFlushSccb(unsigned char p_card, unsigned char error_code);
|
|
static void FPT_queueAddSccb(struct sccb *p_SCCB, unsigned char card);
|
|
static unsigned char FPT_queueFindSccb(struct sccb *p_SCCB,
|
|
unsigned char p_card);
|
|
static void FPT_utilUpdateResidual(struct sccb *p_SCCB);
|
|
static unsigned short FPT_CalcCrc16(unsigned char buffer[]);
|
|
static unsigned char FPT_CalcLrc(unsigned char buffer[]);
|
|
|
|
static void FPT_Wait1Second(u32 p_port);
|
|
static void FPT_Wait(u32 p_port, unsigned char p_delay);
|
|
static void FPT_utilEEWriteOnOff(u32 p_port, unsigned char p_mode);
|
|
static void FPT_utilEEWrite(u32 p_port, unsigned short ee_data,
|
|
unsigned short ee_addr);
|
|
static unsigned short FPT_utilEERead(u32 p_port,
|
|
unsigned short ee_addr);
|
|
static unsigned short FPT_utilEEReadOrg(u32 p_port,
|
|
unsigned short ee_addr);
|
|
static void FPT_utilEESendCmdAddr(u32 p_port, unsigned char ee_cmd,
|
|
unsigned short ee_addr);
|
|
|
|
static void FPT_phaseDataOut(u32 port, unsigned char p_card);
|
|
static void FPT_phaseDataIn(u32 port, unsigned char p_card);
|
|
static void FPT_phaseCommand(u32 port, unsigned char p_card);
|
|
static void FPT_phaseStatus(u32 port, unsigned char p_card);
|
|
static void FPT_phaseMsgOut(u32 port, unsigned char p_card);
|
|
static void FPT_phaseMsgIn(u32 port, unsigned char p_card);
|
|
static void FPT_phaseIllegal(u32 port, unsigned char p_card);
|
|
|
|
static void FPT_phaseDecode(u32 port, unsigned char p_card);
|
|
static void FPT_phaseChkFifo(u32 port, unsigned char p_card);
|
|
static void FPT_phaseBusFree(u32 p_port, unsigned char p_card);
|
|
|
|
static void FPT_XbowInit(u32 port, unsigned char scamFlg);
|
|
static void FPT_BusMasterInit(u32 p_port);
|
|
static void FPT_DiagEEPROM(u32 p_port);
|
|
|
|
static void FPT_dataXferProcessor(u32 port,
|
|
struct sccb_card *pCurrCard);
|
|
static void FPT_busMstrSGDataXferStart(u32 port,
|
|
struct sccb *pCurrSCCB);
|
|
static void FPT_busMstrDataXferStart(u32 port,
|
|
struct sccb *pCurrSCCB);
|
|
static void FPT_hostDataXferAbort(u32 port, unsigned char p_card,
|
|
struct sccb *pCurrSCCB);
|
|
static void FPT_hostDataXferRestart(struct sccb *currSCCB);
|
|
|
|
static unsigned char FPT_SccbMgr_bad_isr(u32 p_port,
|
|
unsigned char p_card,
|
|
struct sccb_card *pCurrCard,
|
|
unsigned short p_int);
|
|
|
|
static void FPT_SccbMgrTableInitAll(void);
|
|
static void FPT_SccbMgrTableInitCard(struct sccb_card *pCurrCard,
|
|
unsigned char p_card);
|
|
static void FPT_SccbMgrTableInitTarget(unsigned char p_card,
|
|
unsigned char target);
|
|
|
|
static void FPT_scini(unsigned char p_card, unsigned char p_our_id,
|
|
unsigned char p_power_up);
|
|
|
|
static int FPT_scarb(u32 p_port, unsigned char p_sel_type);
|
|
static void FPT_scbusf(u32 p_port);
|
|
static void FPT_scsel(u32 p_port);
|
|
static void FPT_scasid(unsigned char p_card, u32 p_port);
|
|
static unsigned char FPT_scxferc(u32 p_port, unsigned char p_data);
|
|
static unsigned char FPT_scsendi(u32 p_port,
|
|
unsigned char p_id_string[]);
|
|
static unsigned char FPT_sciso(u32 p_port,
|
|
unsigned char p_id_string[]);
|
|
static void FPT_scwirod(u32 p_port, unsigned char p_data_bit);
|
|
static void FPT_scwiros(u32 p_port, unsigned char p_data_bit);
|
|
static unsigned char FPT_scvalq(unsigned char p_quintet);
|
|
static unsigned char FPT_scsell(u32 p_port, unsigned char targ_id);
|
|
static void FPT_scwtsel(u32 p_port);
|
|
static void FPT_inisci(unsigned char p_card, u32 p_port,
|
|
unsigned char p_our_id);
|
|
static void FPT_scsavdi(unsigned char p_card, u32 p_port);
|
|
static unsigned char FPT_scmachid(unsigned char p_card,
|
|
unsigned char p_id_string[]);
|
|
|
|
static void FPT_autoCmdCmplt(u32 p_port, unsigned char p_card);
|
|
static void FPT_autoLoadDefaultMap(u32 p_port);
|
|
|
|
static struct sccb_mgr_tar_info FPT_sccbMgrTbl[MAX_CARDS][MAX_SCSI_TAR] =
|
|
{ {{0}} };
|
|
static struct sccb_card FPT_BL_Card[MAX_CARDS] = { {0} };
|
|
static SCCBSCAM_INFO FPT_scamInfo[MAX_SCSI_TAR] = { {{0}} };
|
|
static struct nvram_info FPT_nvRamInfo[MAX_MB_CARDS] = { {0} };
|
|
|
|
static unsigned char FPT_mbCards = 0;
|
|
static unsigned char FPT_scamHAString[] =
|
|
{ 0x63, 0x07, 'B', 'U', 'S', 'L', 'O', 'G', 'I', 'C',
|
|
' ', 'B', 'T', '-', '9', '3', '0',
|
|
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
|
|
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20
|
|
};
|
|
|
|
static unsigned short FPT_default_intena = 0;
|
|
|
|
static void (*FPT_s_PhaseTbl[8]) (u32, unsigned char) = {
|
|
0};
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FlashPoint_ProbeHostAdapter
|
|
*
|
|
* Description: Setup and/or Search for cards and return info to caller.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static int FlashPoint_ProbeHostAdapter(struct sccb_mgr_info *pCardInfo)
|
|
{
|
|
static unsigned char first_time = 1;
|
|
|
|
unsigned char i, j, id, ScamFlg;
|
|
unsigned short temp, temp2, temp3, temp4, temp5, temp6;
|
|
u32 ioport;
|
|
struct nvram_info *pCurrNvRam;
|
|
|
|
ioport = pCardInfo->si_baseaddr;
|
|
|
|
if (RD_HARPOON(ioport + hp_vendor_id_0) != ORION_VEND_0)
|
|
return (int)FAILURE;
|
|
|
|
if ((RD_HARPOON(ioport + hp_vendor_id_1) != ORION_VEND_1))
|
|
return (int)FAILURE;
|
|
|
|
if ((RD_HARPOON(ioport + hp_device_id_0) != ORION_DEV_0))
|
|
return (int)FAILURE;
|
|
|
|
if ((RD_HARPOON(ioport + hp_device_id_1) != ORION_DEV_1))
|
|
return (int)FAILURE;
|
|
|
|
if (RD_HARPOON(ioport + hp_rev_num) != 0x0f) {
|
|
|
|
/* For new Harpoon then check for sub_device ID LSB
|
|
the bits(0-3) must be all ZERO for compatible with
|
|
current version of SCCBMgr, else skip this Harpoon
|
|
device. */
|
|
|
|
if (RD_HARPOON(ioport + hp_sub_device_id_0) & 0x0f)
|
|
return (int)FAILURE;
|
|
}
|
|
|
|
if (first_time) {
|
|
FPT_SccbMgrTableInitAll();
|
|
first_time = 0;
|
|
FPT_mbCards = 0;
|
|
}
|
|
|
|
if (FPT_RdStack(ioport, 0) != 0x00) {
|
|
if (FPT_ChkIfChipInitialized(ioport) == 0) {
|
|
pCurrNvRam = NULL;
|
|
WR_HARPOON(ioport + hp_semaphore, 0x00);
|
|
FPT_XbowInit(ioport, 0); /*Must Init the SCSI before attempting */
|
|
FPT_DiagEEPROM(ioport);
|
|
} else {
|
|
if (FPT_mbCards < MAX_MB_CARDS) {
|
|
pCurrNvRam = &FPT_nvRamInfo[FPT_mbCards];
|
|
FPT_mbCards++;
|
|
pCurrNvRam->niBaseAddr = ioport;
|
|
FPT_RNVRamData(pCurrNvRam);
|
|
} else
|
|
return (int)FAILURE;
|
|
}
|
|
} else
|
|
pCurrNvRam = NULL;
|
|
|
|
WR_HARPOON(ioport + hp_clkctrl_0, CLKCTRL_DEFAULT);
|
|
WR_HARPOON(ioport + hp_sys_ctrl, 0x00);
|
|
|
|
if (pCurrNvRam)
|
|
pCardInfo->si_id = pCurrNvRam->niAdapId;
|
|
else
|
|
pCardInfo->si_id =
|
|
(unsigned
|
|
char)(FPT_utilEERead(ioport,
|
|
(ADAPTER_SCSI_ID /
|
|
2)) & (unsigned char)0x0FF);
|
|
|
|
pCardInfo->si_lun = 0x00;
|
|
pCardInfo->si_fw_revision = ORION_FW_REV;
|
|
temp2 = 0x0000;
|
|
temp3 = 0x0000;
|
|
temp4 = 0x0000;
|
|
temp5 = 0x0000;
|
|
temp6 = 0x0000;
|
|
|
|
for (id = 0; id < (16 / 2); id++) {
|
|
|
|
if (pCurrNvRam) {
|
|
temp = (unsigned short)pCurrNvRam->niSyncTbl[id];
|
|
temp = ((temp & 0x03) + ((temp << 4) & 0xc0)) +
|
|
(((temp << 4) & 0x0300) + ((temp << 8) & 0xc000));
|
|
} else
|
|
temp =
|
|
FPT_utilEERead(ioport,
|
|
(unsigned short)((SYNC_RATE_TBL / 2)
|
|
+ id));
|
|
|
|
for (i = 0; i < 2; temp >>= 8, i++) {
|
|
|
|
temp2 >>= 1;
|
|
temp3 >>= 1;
|
|
temp4 >>= 1;
|
|
temp5 >>= 1;
|
|
temp6 >>= 1;
|
|
switch (temp & 0x3) {
|
|
case AUTO_RATE_20: /* Synchronous, 20 mega-transfers/second */
|
|
temp6 |= 0x8000; /* Fall through */
|
|
case AUTO_RATE_10: /* Synchronous, 10 mega-transfers/second */
|
|
temp5 |= 0x8000; /* Fall through */
|
|
case AUTO_RATE_05: /* Synchronous, 5 mega-transfers/second */
|
|
temp2 |= 0x8000; /* Fall through */
|
|
case AUTO_RATE_00: /* Asynchronous */
|
|
break;
|
|
}
|
|
|
|
if (temp & DISC_ENABLE_BIT)
|
|
temp3 |= 0x8000;
|
|
|
|
if (temp & WIDE_NEGO_BIT)
|
|
temp4 |= 0x8000;
|
|
|
|
}
|
|
}
|
|
|
|
pCardInfo->si_per_targ_init_sync = temp2;
|
|
pCardInfo->si_per_targ_no_disc = temp3;
|
|
pCardInfo->si_per_targ_wide_nego = temp4;
|
|
pCardInfo->si_per_targ_fast_nego = temp5;
|
|
pCardInfo->si_per_targ_ultra_nego = temp6;
|
|
|
|
if (pCurrNvRam)
|
|
i = pCurrNvRam->niSysConf;
|
|
else
|
|
i = (unsigned
|
|
char)(FPT_utilEERead(ioport, (SYSTEM_CONFIG / 2)));
|
|
|
|
if (pCurrNvRam)
|
|
ScamFlg = pCurrNvRam->niScamConf;
|
|
else
|
|
ScamFlg =
|
|
(unsigned char)FPT_utilEERead(ioport, SCAM_CONFIG / 2);
|
|
|
|
pCardInfo->si_flags = 0x0000;
|
|
|
|
if (i & 0x01)
|
|
pCardInfo->si_flags |= SCSI_PARITY_ENA;
|
|
|
|
if (!(i & 0x02))
|
|
pCardInfo->si_flags |= SOFT_RESET;
|
|
|
|
if (i & 0x10)
|
|
pCardInfo->si_flags |= EXTENDED_TRANSLATION;
|
|
|
|
if (ScamFlg & SCAM_ENABLED)
|
|
pCardInfo->si_flags |= FLAG_SCAM_ENABLED;
|
|
|
|
if (ScamFlg & SCAM_LEVEL2)
|
|
pCardInfo->si_flags |= FLAG_SCAM_LEVEL2;
|
|
|
|
j = (RD_HARPOON(ioport + hp_bm_ctrl) & ~SCSI_TERM_ENA_L);
|
|
if (i & 0x04) {
|
|
j |= SCSI_TERM_ENA_L;
|
|
}
|
|
WR_HARPOON(ioport + hp_bm_ctrl, j);
|
|
|
|
j = (RD_HARPOON(ioport + hp_ee_ctrl) & ~SCSI_TERM_ENA_H);
|
|
if (i & 0x08) {
|
|
j |= SCSI_TERM_ENA_H;
|
|
}
|
|
WR_HARPOON(ioport + hp_ee_ctrl, j);
|
|
|
|
if (!(RD_HARPOON(ioport + hp_page_ctrl) & NARROW_SCSI_CARD))
|
|
|
|
pCardInfo->si_flags |= SUPPORT_16TAR_32LUN;
|
|
|
|
pCardInfo->si_card_family = HARPOON_FAMILY;
|
|
pCardInfo->si_bustype = BUSTYPE_PCI;
|
|
|
|
if (pCurrNvRam) {
|
|
pCardInfo->si_card_model[0] = '9';
|
|
switch (pCurrNvRam->niModel & 0x0f) {
|
|
case MODEL_LT:
|
|
pCardInfo->si_card_model[1] = '3';
|
|
pCardInfo->si_card_model[2] = '0';
|
|
break;
|
|
case MODEL_LW:
|
|
pCardInfo->si_card_model[1] = '5';
|
|
pCardInfo->si_card_model[2] = '0';
|
|
break;
|
|
case MODEL_DL:
|
|
pCardInfo->si_card_model[1] = '3';
|
|
pCardInfo->si_card_model[2] = '2';
|
|
break;
|
|
case MODEL_DW:
|
|
pCardInfo->si_card_model[1] = '5';
|
|
pCardInfo->si_card_model[2] = '2';
|
|
break;
|
|
}
|
|
} else {
|
|
temp = FPT_utilEERead(ioport, (MODEL_NUMB_0 / 2));
|
|
pCardInfo->si_card_model[0] = (unsigned char)(temp >> 8);
|
|
temp = FPT_utilEERead(ioport, (MODEL_NUMB_2 / 2));
|
|
|
|
pCardInfo->si_card_model[1] = (unsigned char)(temp & 0x00FF);
|
|
pCardInfo->si_card_model[2] = (unsigned char)(temp >> 8);
|
|
}
|
|
|
|
if (pCardInfo->si_card_model[1] == '3') {
|
|
if (RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7))
|
|
pCardInfo->si_flags |= LOW_BYTE_TERM;
|
|
} else if (pCardInfo->si_card_model[2] == '0') {
|
|
temp = RD_HARPOON(ioport + hp_xfer_pad);
|
|
WR_HARPOON(ioport + hp_xfer_pad, (temp & ~BIT(4)));
|
|
if (RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7))
|
|
pCardInfo->si_flags |= LOW_BYTE_TERM;
|
|
WR_HARPOON(ioport + hp_xfer_pad, (temp | BIT(4)));
|
|
if (RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7))
|
|
pCardInfo->si_flags |= HIGH_BYTE_TERM;
|
|
WR_HARPOON(ioport + hp_xfer_pad, temp);
|
|
} else {
|
|
temp = RD_HARPOON(ioport + hp_ee_ctrl);
|
|
temp2 = RD_HARPOON(ioport + hp_xfer_pad);
|
|
WR_HARPOON(ioport + hp_ee_ctrl, (temp | SEE_CS));
|
|
WR_HARPOON(ioport + hp_xfer_pad, (temp2 | BIT(4)));
|
|
temp3 = 0;
|
|
for (i = 0; i < 8; i++) {
|
|
temp3 <<= 1;
|
|
if (!(RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7)))
|
|
temp3 |= 1;
|
|
WR_HARPOON(ioport + hp_xfer_pad, (temp2 & ~BIT(4)));
|
|
WR_HARPOON(ioport + hp_xfer_pad, (temp2 | BIT(4)));
|
|
}
|
|
WR_HARPOON(ioport + hp_ee_ctrl, temp);
|
|
WR_HARPOON(ioport + hp_xfer_pad, temp2);
|
|
if (!(temp3 & BIT(7)))
|
|
pCardInfo->si_flags |= LOW_BYTE_TERM;
|
|
if (!(temp3 & BIT(6)))
|
|
pCardInfo->si_flags |= HIGH_BYTE_TERM;
|
|
}
|
|
|
|
ARAM_ACCESS(ioport);
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
|
|
pCardInfo->si_XlatInfo[i] =
|
|
RD_HARPOON(ioport + hp_aramBase + BIOS_DATA_OFFSET + i);
|
|
}
|
|
|
|
/* return with -1 if no sort, else return with
|
|
logical card number sorted by BIOS (zero-based) */
|
|
|
|
pCardInfo->si_relative_cardnum =
|
|
(unsigned
|
|
char)(RD_HARPOON(ioport + hp_aramBase + BIOS_RELATIVE_CARD) - 1);
|
|
|
|
SGRAM_ACCESS(ioport);
|
|
|
|
FPT_s_PhaseTbl[0] = FPT_phaseDataOut;
|
|
FPT_s_PhaseTbl[1] = FPT_phaseDataIn;
|
|
FPT_s_PhaseTbl[2] = FPT_phaseIllegal;
|
|
FPT_s_PhaseTbl[3] = FPT_phaseIllegal;
|
|
FPT_s_PhaseTbl[4] = FPT_phaseCommand;
|
|
FPT_s_PhaseTbl[5] = FPT_phaseStatus;
|
|
FPT_s_PhaseTbl[6] = FPT_phaseMsgOut;
|
|
FPT_s_PhaseTbl[7] = FPT_phaseMsgIn;
|
|
|
|
pCardInfo->si_present = 0x01;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FlashPoint_HardwareResetHostAdapter
|
|
*
|
|
* Description: Setup adapter for normal operation (hard reset).
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void *FlashPoint_HardwareResetHostAdapter(struct sccb_mgr_info
|
|
*pCardInfo)
|
|
{
|
|
struct sccb_card *CurrCard = NULL;
|
|
struct nvram_info *pCurrNvRam;
|
|
unsigned char i, j, thisCard, ScamFlg;
|
|
unsigned short temp, sync_bit_map, id;
|
|
u32 ioport;
|
|
|
|
ioport = pCardInfo->si_baseaddr;
|
|
|
|
for (thisCard = 0; thisCard <= MAX_CARDS; thisCard++) {
|
|
|
|
if (thisCard == MAX_CARDS)
|
|
return (void *)FAILURE;
|
|
|
|
if (FPT_BL_Card[thisCard].ioPort == ioport) {
|
|
|
|
CurrCard = &FPT_BL_Card[thisCard];
|
|
FPT_SccbMgrTableInitCard(CurrCard, thisCard);
|
|
break;
|
|
}
|
|
|
|
else if (FPT_BL_Card[thisCard].ioPort == 0x00) {
|
|
|
|
FPT_BL_Card[thisCard].ioPort = ioport;
|
|
CurrCard = &FPT_BL_Card[thisCard];
|
|
|
|
if (FPT_mbCards)
|
|
for (i = 0; i < FPT_mbCards; i++) {
|
|
if (CurrCard->ioPort ==
|
|
FPT_nvRamInfo[i].niBaseAddr)
|
|
CurrCard->pNvRamInfo =
|
|
&FPT_nvRamInfo[i];
|
|
}
|
|
FPT_SccbMgrTableInitCard(CurrCard, thisCard);
|
|
CurrCard->cardIndex = thisCard;
|
|
CurrCard->cardInfo = pCardInfo;
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
pCurrNvRam = CurrCard->pNvRamInfo;
|
|
|
|
if (pCurrNvRam) {
|
|
ScamFlg = pCurrNvRam->niScamConf;
|
|
} else {
|
|
ScamFlg =
|
|
(unsigned char)FPT_utilEERead(ioport, SCAM_CONFIG / 2);
|
|
}
|
|
|
|
FPT_BusMasterInit(ioport);
|
|
FPT_XbowInit(ioport, ScamFlg);
|
|
|
|
FPT_autoLoadDefaultMap(ioport);
|
|
|
|
for (i = 0, id = 0x01; i != pCardInfo->si_id; i++, id <<= 1) {
|
|
}
|
|
|
|
WR_HARPOON(ioport + hp_selfid_0, id);
|
|
WR_HARPOON(ioport + hp_selfid_1, 0x00);
|
|
WR_HARPOON(ioport + hp_arb_id, pCardInfo->si_id);
|
|
CurrCard->ourId = pCardInfo->si_id;
|
|
|
|
i = (unsigned char)pCardInfo->si_flags;
|
|
if (i & SCSI_PARITY_ENA)
|
|
WR_HARPOON(ioport + hp_portctrl_1, (HOST_MODE8 | CHK_SCSI_P));
|
|
|
|
j = (RD_HARPOON(ioport + hp_bm_ctrl) & ~SCSI_TERM_ENA_L);
|
|
if (i & LOW_BYTE_TERM)
|
|
j |= SCSI_TERM_ENA_L;
|
|
WR_HARPOON(ioport + hp_bm_ctrl, j);
|
|
|
|
j = (RD_HARPOON(ioport + hp_ee_ctrl) & ~SCSI_TERM_ENA_H);
|
|
if (i & HIGH_BYTE_TERM)
|
|
j |= SCSI_TERM_ENA_H;
|
|
WR_HARPOON(ioport + hp_ee_ctrl, j);
|
|
|
|
if (!(pCardInfo->si_flags & SOFT_RESET)) {
|
|
|
|
FPT_sresb(ioport, thisCard);
|
|
|
|
FPT_scini(thisCard, pCardInfo->si_id, 0);
|
|
}
|
|
|
|
if (pCardInfo->si_flags & POST_ALL_UNDERRRUNS)
|
|
CurrCard->globalFlags |= F_NO_FILTER;
|
|
|
|
if (pCurrNvRam) {
|
|
if (pCurrNvRam->niSysConf & 0x10)
|
|
CurrCard->globalFlags |= F_GREEN_PC;
|
|
} else {
|
|
if (FPT_utilEERead(ioport, (SYSTEM_CONFIG / 2)) & GREEN_PC_ENA)
|
|
CurrCard->globalFlags |= F_GREEN_PC;
|
|
}
|
|
|
|
/* Set global flag to indicate Re-Negotiation to be done on all
|
|
ckeck condition */
|
|
if (pCurrNvRam) {
|
|
if (pCurrNvRam->niScsiConf & 0x04)
|
|
CurrCard->globalFlags |= F_DO_RENEGO;
|
|
} else {
|
|
if (FPT_utilEERead(ioport, (SCSI_CONFIG / 2)) & RENEGO_ENA)
|
|
CurrCard->globalFlags |= F_DO_RENEGO;
|
|
}
|
|
|
|
if (pCurrNvRam) {
|
|
if (pCurrNvRam->niScsiConf & 0x08)
|
|
CurrCard->globalFlags |= F_CONLUN_IO;
|
|
} else {
|
|
if (FPT_utilEERead(ioport, (SCSI_CONFIG / 2)) & CONNIO_ENA)
|
|
CurrCard->globalFlags |= F_CONLUN_IO;
|
|
}
|
|
|
|
temp = pCardInfo->si_per_targ_no_disc;
|
|
|
|
for (i = 0, id = 1; i < MAX_SCSI_TAR; i++, id <<= 1) {
|
|
|
|
if (temp & id)
|
|
FPT_sccbMgrTbl[thisCard][i].TarStatus |= TAR_ALLOW_DISC;
|
|
}
|
|
|
|
sync_bit_map = 0x0001;
|
|
|
|
for (id = 0; id < (MAX_SCSI_TAR / 2); id++) {
|
|
|
|
if (pCurrNvRam) {
|
|
temp = (unsigned short)pCurrNvRam->niSyncTbl[id];
|
|
temp = ((temp & 0x03) + ((temp << 4) & 0xc0)) +
|
|
(((temp << 4) & 0x0300) + ((temp << 8) & 0xc000));
|
|
} else
|
|
temp =
|
|
FPT_utilEERead(ioport,
|
|
(unsigned short)((SYNC_RATE_TBL / 2)
|
|
+ id));
|
|
|
|
for (i = 0; i < 2; temp >>= 8, i++) {
|
|
|
|
if (pCardInfo->si_per_targ_init_sync & sync_bit_map) {
|
|
|
|
FPT_sccbMgrTbl[thisCard][id * 2 +
|
|
i].TarEEValue =
|
|
(unsigned char)temp;
|
|
}
|
|
|
|
else {
|
|
FPT_sccbMgrTbl[thisCard][id * 2 +
|
|
i].TarStatus |=
|
|
SYNC_SUPPORTED;
|
|
FPT_sccbMgrTbl[thisCard][id * 2 +
|
|
i].TarEEValue =
|
|
(unsigned char)(temp & ~EE_SYNC_MASK);
|
|
}
|
|
|
|
/* if ((pCardInfo->si_per_targ_wide_nego & sync_bit_map) ||
|
|
(id*2+i >= 8)){
|
|
*/
|
|
if (pCardInfo->si_per_targ_wide_nego & sync_bit_map) {
|
|
|
|
FPT_sccbMgrTbl[thisCard][id * 2 +
|
|
i].TarEEValue |=
|
|
EE_WIDE_SCSI;
|
|
|
|
}
|
|
|
|
else { /* NARROW SCSI */
|
|
FPT_sccbMgrTbl[thisCard][id * 2 +
|
|
i].TarStatus |=
|
|
WIDE_NEGOCIATED;
|
|
}
|
|
|
|
sync_bit_map <<= 1;
|
|
|
|
}
|
|
}
|
|
|
|
WR_HARPOON((ioport + hp_semaphore),
|
|
(unsigned char)(RD_HARPOON((ioport + hp_semaphore)) |
|
|
SCCB_MGR_PRESENT));
|
|
|
|
return (void *)CurrCard;
|
|
}
|
|
|
|
static void FlashPoint_ReleaseHostAdapter(void *pCurrCard)
|
|
{
|
|
unsigned char i;
|
|
u32 portBase;
|
|
u32 regOffset;
|
|
u32 scamData;
|
|
u32 *pScamTbl;
|
|
struct nvram_info *pCurrNvRam;
|
|
|
|
pCurrNvRam = ((struct sccb_card *)pCurrCard)->pNvRamInfo;
|
|
|
|
if (pCurrNvRam) {
|
|
FPT_WrStack(pCurrNvRam->niBaseAddr, 0, pCurrNvRam->niModel);
|
|
FPT_WrStack(pCurrNvRam->niBaseAddr, 1, pCurrNvRam->niSysConf);
|
|
FPT_WrStack(pCurrNvRam->niBaseAddr, 2, pCurrNvRam->niScsiConf);
|
|
FPT_WrStack(pCurrNvRam->niBaseAddr, 3, pCurrNvRam->niScamConf);
|
|
FPT_WrStack(pCurrNvRam->niBaseAddr, 4, pCurrNvRam->niAdapId);
|
|
|
|
for (i = 0; i < MAX_SCSI_TAR / 2; i++)
|
|
FPT_WrStack(pCurrNvRam->niBaseAddr,
|
|
(unsigned char)(i + 5),
|
|
pCurrNvRam->niSyncTbl[i]);
|
|
|
|
portBase = pCurrNvRam->niBaseAddr;
|
|
|
|
for (i = 0; i < MAX_SCSI_TAR; i++) {
|
|
regOffset = hp_aramBase + 64 + i * 4;
|
|
pScamTbl = (u32 *)&pCurrNvRam->niScamTbl[i];
|
|
scamData = *pScamTbl;
|
|
WR_HARP32(portBase, regOffset, scamData);
|
|
}
|
|
|
|
} else {
|
|
FPT_WrStack(((struct sccb_card *)pCurrCard)->ioPort, 0, 0);
|
|
}
|
|
}
|
|
|
|
static void FPT_RNVRamData(struct nvram_info *pNvRamInfo)
|
|
{
|
|
unsigned char i;
|
|
u32 portBase;
|
|
u32 regOffset;
|
|
u32 scamData;
|
|
u32 *pScamTbl;
|
|
|
|
pNvRamInfo->niModel = FPT_RdStack(pNvRamInfo->niBaseAddr, 0);
|
|
pNvRamInfo->niSysConf = FPT_RdStack(pNvRamInfo->niBaseAddr, 1);
|
|
pNvRamInfo->niScsiConf = FPT_RdStack(pNvRamInfo->niBaseAddr, 2);
|
|
pNvRamInfo->niScamConf = FPT_RdStack(pNvRamInfo->niBaseAddr, 3);
|
|
pNvRamInfo->niAdapId = FPT_RdStack(pNvRamInfo->niBaseAddr, 4);
|
|
|
|
for (i = 0; i < MAX_SCSI_TAR / 2; i++)
|
|
pNvRamInfo->niSyncTbl[i] =
|
|
FPT_RdStack(pNvRamInfo->niBaseAddr, (unsigned char)(i + 5));
|
|
|
|
portBase = pNvRamInfo->niBaseAddr;
|
|
|
|
for (i = 0; i < MAX_SCSI_TAR; i++) {
|
|
regOffset = hp_aramBase + 64 + i * 4;
|
|
RD_HARP32(portBase, regOffset, scamData);
|
|
pScamTbl = (u32 *)&pNvRamInfo->niScamTbl[i];
|
|
*pScamTbl = scamData;
|
|
}
|
|
|
|
}
|
|
|
|
static unsigned char FPT_RdStack(u32 portBase, unsigned char index)
|
|
{
|
|
WR_HARPOON(portBase + hp_stack_addr, index);
|
|
return RD_HARPOON(portBase + hp_stack_data);
|
|
}
|
|
|
|
static void FPT_WrStack(u32 portBase, unsigned char index, unsigned char data)
|
|
{
|
|
WR_HARPOON(portBase + hp_stack_addr, index);
|
|
WR_HARPOON(portBase + hp_stack_data, data);
|
|
}
|
|
|
|
static unsigned char FPT_ChkIfChipInitialized(u32 ioPort)
|
|
{
|
|
if ((RD_HARPOON(ioPort + hp_arb_id) & 0x0f) != FPT_RdStack(ioPort, 4))
|
|
return 0;
|
|
if ((RD_HARPOON(ioPort + hp_clkctrl_0) & CLKCTRL_DEFAULT)
|
|
!= CLKCTRL_DEFAULT)
|
|
return 0;
|
|
if ((RD_HARPOON(ioPort + hp_seltimeout) == TO_250ms) ||
|
|
(RD_HARPOON(ioPort + hp_seltimeout) == TO_290ms))
|
|
return 1;
|
|
return 0;
|
|
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FlashPoint_StartCCB
|
|
*
|
|
* Description: Start a command pointed to by p_Sccb. When the
|
|
* command is completed it will be returned via the
|
|
* callback function.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FlashPoint_StartCCB(void *curr_card, struct sccb *p_Sccb)
|
|
{
|
|
u32 ioport;
|
|
unsigned char thisCard, lun;
|
|
struct sccb *pSaveSccb;
|
|
CALL_BK_FN callback;
|
|
struct sccb_card *pCurrCard = curr_card;
|
|
|
|
thisCard = pCurrCard->cardIndex;
|
|
ioport = pCurrCard->ioPort;
|
|
|
|
if ((p_Sccb->TargID >= MAX_SCSI_TAR) || (p_Sccb->Lun >= MAX_LUN)) {
|
|
|
|
p_Sccb->HostStatus = SCCB_COMPLETE;
|
|
p_Sccb->SccbStatus = SCCB_ERROR;
|
|
callback = (CALL_BK_FN) p_Sccb->SccbCallback;
|
|
if (callback)
|
|
callback(p_Sccb);
|
|
|
|
return;
|
|
}
|
|
|
|
FPT_sinits(p_Sccb, thisCard);
|
|
|
|
if (!pCurrCard->cmdCounter) {
|
|
WR_HARPOON(ioport + hp_semaphore,
|
|
(RD_HARPOON(ioport + hp_semaphore)
|
|
| SCCB_MGR_ACTIVE));
|
|
|
|
if (pCurrCard->globalFlags & F_GREEN_PC) {
|
|
WR_HARPOON(ioport + hp_clkctrl_0, CLKCTRL_DEFAULT);
|
|
WR_HARPOON(ioport + hp_sys_ctrl, 0x00);
|
|
}
|
|
}
|
|
|
|
pCurrCard->cmdCounter++;
|
|
|
|
if (RD_HARPOON(ioport + hp_semaphore) & BIOS_IN_USE) {
|
|
|
|
WR_HARPOON(ioport + hp_semaphore,
|
|
(RD_HARPOON(ioport + hp_semaphore)
|
|
| TICKLE_ME));
|
|
if (p_Sccb->OperationCode == RESET_COMMAND) {
|
|
pSaveSccb =
|
|
pCurrCard->currentSCCB;
|
|
pCurrCard->currentSCCB = p_Sccb;
|
|
FPT_queueSelectFail(&FPT_BL_Card[thisCard], thisCard);
|
|
pCurrCard->currentSCCB =
|
|
pSaveSccb;
|
|
} else {
|
|
FPT_queueAddSccb(p_Sccb, thisCard);
|
|
}
|
|
}
|
|
|
|
else if ((RD_HARPOON(ioport + hp_page_ctrl) & G_INT_DISABLE)) {
|
|
|
|
if (p_Sccb->OperationCode == RESET_COMMAND) {
|
|
pSaveSccb =
|
|
pCurrCard->currentSCCB;
|
|
pCurrCard->currentSCCB = p_Sccb;
|
|
FPT_queueSelectFail(&FPT_BL_Card[thisCard], thisCard);
|
|
pCurrCard->currentSCCB =
|
|
pSaveSccb;
|
|
} else {
|
|
FPT_queueAddSccb(p_Sccb, thisCard);
|
|
}
|
|
}
|
|
|
|
else {
|
|
|
|
MDISABLE_INT(ioport);
|
|
|
|
if ((pCurrCard->globalFlags & F_CONLUN_IO) &&
|
|
((FPT_sccbMgrTbl[thisCard][p_Sccb->TargID].
|
|
TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
|
|
lun = p_Sccb->Lun;
|
|
else
|
|
lun = 0;
|
|
if ((pCurrCard->currentSCCB == NULL) &&
|
|
(FPT_sccbMgrTbl[thisCard][p_Sccb->TargID].TarSelQ_Cnt == 0)
|
|
&& (FPT_sccbMgrTbl[thisCard][p_Sccb->TargID].TarLUNBusy[lun]
|
|
== 0)) {
|
|
|
|
pCurrCard->currentSCCB = p_Sccb;
|
|
FPT_ssel(p_Sccb->SccbIOPort, thisCard);
|
|
}
|
|
|
|
else {
|
|
|
|
if (p_Sccb->OperationCode == RESET_COMMAND) {
|
|
pSaveSccb = pCurrCard->currentSCCB;
|
|
pCurrCard->currentSCCB = p_Sccb;
|
|
FPT_queueSelectFail(&FPT_BL_Card[thisCard],
|
|
thisCard);
|
|
pCurrCard->currentSCCB = pSaveSccb;
|
|
} else {
|
|
FPT_queueAddSccb(p_Sccb, thisCard);
|
|
}
|
|
}
|
|
|
|
MENABLE_INT(ioport);
|
|
}
|
|
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FlashPoint_AbortCCB
|
|
*
|
|
* Description: Abort the command pointed to by p_Sccb. When the
|
|
* command is completed it will be returned via the
|
|
* callback function.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static int FlashPoint_AbortCCB(void *pCurrCard, struct sccb *p_Sccb)
|
|
{
|
|
u32 ioport;
|
|
|
|
unsigned char thisCard;
|
|
CALL_BK_FN callback;
|
|
unsigned char TID;
|
|
struct sccb *pSaveSCCB;
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
|
|
ioport = ((struct sccb_card *)pCurrCard)->ioPort;
|
|
|
|
thisCard = ((struct sccb_card *)pCurrCard)->cardIndex;
|
|
|
|
if (!(RD_HARPOON(ioport + hp_page_ctrl) & G_INT_DISABLE)) {
|
|
|
|
if (FPT_queueFindSccb(p_Sccb, thisCard)) {
|
|
|
|
((struct sccb_card *)pCurrCard)->cmdCounter--;
|
|
|
|
if (!((struct sccb_card *)pCurrCard)->cmdCounter)
|
|
WR_HARPOON(ioport + hp_semaphore,
|
|
(RD_HARPOON(ioport + hp_semaphore)
|
|
& (unsigned
|
|
char)(~(SCCB_MGR_ACTIVE |
|
|
TICKLE_ME))));
|
|
|
|
p_Sccb->SccbStatus = SCCB_ABORT;
|
|
callback = p_Sccb->SccbCallback;
|
|
callback(p_Sccb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
else {
|
|
if (((struct sccb_card *)pCurrCard)->currentSCCB ==
|
|
p_Sccb) {
|
|
p_Sccb->SccbStatus = SCCB_ABORT;
|
|
return 0;
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
TID = p_Sccb->TargID;
|
|
|
|
if (p_Sccb->Sccb_tag) {
|
|
MDISABLE_INT(ioport);
|
|
if (((struct sccb_card *)pCurrCard)->
|
|
discQ_Tbl[p_Sccb->Sccb_tag] ==
|
|
p_Sccb) {
|
|
p_Sccb->SccbStatus = SCCB_ABORT;
|
|
p_Sccb->Sccb_scsistat =
|
|
ABORT_ST;
|
|
p_Sccb->Sccb_scsimsg =
|
|
SMABORT_TAG;
|
|
|
|
if (((struct sccb_card *)
|
|
pCurrCard)->currentSCCB ==
|
|
NULL) {
|
|
((struct sccb_card *)
|
|
pCurrCard)->
|
|
currentSCCB = p_Sccb;
|
|
FPT_ssel(ioport,
|
|
thisCard);
|
|
} else {
|
|
pSaveSCCB =
|
|
((struct sccb_card
|
|
*)pCurrCard)->
|
|
currentSCCB;
|
|
((struct sccb_card *)
|
|
pCurrCard)->
|
|
currentSCCB = p_Sccb;
|
|
FPT_queueSelectFail((struct sccb_card *)pCurrCard, thisCard);
|
|
((struct sccb_card *)
|
|
pCurrCard)->
|
|
currentSCCB = pSaveSCCB;
|
|
}
|
|
}
|
|
MENABLE_INT(ioport);
|
|
return 0;
|
|
} else {
|
|
currTar_Info =
|
|
&FPT_sccbMgrTbl[thisCard][p_Sccb->
|
|
TargID];
|
|
|
|
if (FPT_BL_Card[thisCard].
|
|
discQ_Tbl[currTar_Info->
|
|
LunDiscQ_Idx[p_Sccb->Lun]]
|
|
== p_Sccb) {
|
|
p_Sccb->SccbStatus = SCCB_ABORT;
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FlashPoint_InterruptPending
|
|
*
|
|
* Description: Do a quick check to determine if there is a pending
|
|
* interrupt for this card and disable the IRQ Pin if so.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static unsigned char FlashPoint_InterruptPending(void *pCurrCard)
|
|
{
|
|
u32 ioport;
|
|
|
|
ioport = ((struct sccb_card *)pCurrCard)->ioPort;
|
|
|
|
if (RD_HARPOON(ioport + hp_int_status) & INT_ASSERTED) {
|
|
return 1;
|
|
}
|
|
|
|
else
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FlashPoint_HandleInterrupt
|
|
*
|
|
* Description: This is our entry point when an interrupt is generated
|
|
* by the card and the upper level driver passes it on to
|
|
* us.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static int FlashPoint_HandleInterrupt(void *pcard)
|
|
{
|
|
struct sccb *currSCCB;
|
|
unsigned char thisCard, result, bm_status, bm_int_st;
|
|
unsigned short hp_int;
|
|
unsigned char i, target;
|
|
struct sccb_card *pCurrCard = pcard;
|
|
u32 ioport;
|
|
|
|
thisCard = pCurrCard->cardIndex;
|
|
ioport = pCurrCard->ioPort;
|
|
|
|
MDISABLE_INT(ioport);
|
|
|
|
if ((bm_int_st = RD_HARPOON(ioport + hp_int_status)) & EXT_STATUS_ON)
|
|
bm_status = RD_HARPOON(ioport + hp_ext_status) &
|
|
(unsigned char)BAD_EXT_STATUS;
|
|
else
|
|
bm_status = 0;
|
|
|
|
WR_HARPOON(ioport + hp_int_mask, (INT_CMD_COMPL | SCSI_INTERRUPT));
|
|
|
|
while ((hp_int = RDW_HARPOON((ioport + hp_intstat)) &
|
|
FPT_default_intena) | bm_status) {
|
|
|
|
currSCCB = pCurrCard->currentSCCB;
|
|
|
|
if (hp_int & (FIFO | TIMEOUT | RESET | SCAM_SEL) || bm_status) {
|
|
result =
|
|
FPT_SccbMgr_bad_isr(ioport, thisCard, pCurrCard,
|
|
hp_int);
|
|
WRW_HARPOON((ioport + hp_intstat),
|
|
(FIFO | TIMEOUT | RESET | SCAM_SEL));
|
|
bm_status = 0;
|
|
|
|
if (result) {
|
|
|
|
MENABLE_INT(ioport);
|
|
return result;
|
|
}
|
|
}
|
|
|
|
else if (hp_int & ICMD_COMP) {
|
|
|
|
if (!(hp_int & BUS_FREE)) {
|
|
/* Wait for the BusFree before starting a new command. We
|
|
must also check for being reselected since the BusFree
|
|
may not show up if another device reselects us in 1.5us or
|
|
less. SRR Wednesday, 3/8/1995.
|
|
*/
|
|
while (!
|
|
(RDW_HARPOON((ioport + hp_intstat)) &
|
|
(BUS_FREE | RSEL))) ;
|
|
}
|
|
|
|
if (pCurrCard->globalFlags & F_HOST_XFER_ACT)
|
|
|
|
FPT_phaseChkFifo(ioport, thisCard);
|
|
|
|
/* WRW_HARPOON((ioport+hp_intstat),
|
|
(BUS_FREE | ICMD_COMP | ITAR_DISC | XFER_CNT_0));
|
|
*/
|
|
|
|
WRW_HARPOON((ioport + hp_intstat), CLR_ALL_INT_1);
|
|
|
|
FPT_autoCmdCmplt(ioport, thisCard);
|
|
|
|
}
|
|
|
|
else if (hp_int & ITAR_DISC) {
|
|
|
|
if (pCurrCard->globalFlags & F_HOST_XFER_ACT)
|
|
FPT_phaseChkFifo(ioport, thisCard);
|
|
|
|
if (RD_HARPOON(ioport + hp_gp_reg_1) ==
|
|
SMSAVE_DATA_PTR) {
|
|
|
|
WR_HARPOON(ioport + hp_gp_reg_1, 0x00);
|
|
currSCCB->Sccb_XferState |= F_NO_DATA_YET;
|
|
|
|
currSCCB->Sccb_savedATC = currSCCB->Sccb_ATC;
|
|
}
|
|
|
|
currSCCB->Sccb_scsistat = DISCONNECT_ST;
|
|
FPT_queueDisconnect(currSCCB, thisCard);
|
|
|
|
/* Wait for the BusFree before starting a new command. We
|
|
must also check for being reselected since the BusFree
|
|
may not show up if another device reselects us in 1.5us or
|
|
less. SRR Wednesday, 3/8/1995.
|
|
*/
|
|
while (!
|
|
(RDW_HARPOON((ioport + hp_intstat)) &
|
|
(BUS_FREE | RSEL))
|
|
&& !((RDW_HARPOON((ioport + hp_intstat)) & PHASE)
|
|
&& RD_HARPOON((ioport + hp_scsisig)) ==
|
|
(SCSI_BSY | SCSI_REQ | SCSI_CD | SCSI_MSG |
|
|
SCSI_IOBIT))) ;
|
|
|
|
/*
|
|
The additional loop exit condition above detects a timing problem
|
|
with the revision D/E harpoon chips. The caller should reset the
|
|
host adapter to recover when 0xFE is returned.
|
|
*/
|
|
if (!
|
|
(RDW_HARPOON((ioport + hp_intstat)) &
|
|
(BUS_FREE | RSEL))) {
|
|
MENABLE_INT(ioport);
|
|
return 0xFE;
|
|
}
|
|
|
|
WRW_HARPOON((ioport + hp_intstat),
|
|
(BUS_FREE | ITAR_DISC));
|
|
|
|
pCurrCard->globalFlags |= F_NEW_SCCB_CMD;
|
|
|
|
}
|
|
|
|
else if (hp_int & RSEL) {
|
|
|
|
WRW_HARPOON((ioport + hp_intstat),
|
|
(PROG_HLT | RSEL | PHASE | BUS_FREE));
|
|
|
|
if (RDW_HARPOON((ioport + hp_intstat)) & ITAR_DISC) {
|
|
if (pCurrCard->globalFlags & F_HOST_XFER_ACT)
|
|
FPT_phaseChkFifo(ioport, thisCard);
|
|
|
|
if (RD_HARPOON(ioport + hp_gp_reg_1) ==
|
|
SMSAVE_DATA_PTR) {
|
|
WR_HARPOON(ioport + hp_gp_reg_1, 0x00);
|
|
currSCCB->Sccb_XferState |=
|
|
F_NO_DATA_YET;
|
|
currSCCB->Sccb_savedATC =
|
|
currSCCB->Sccb_ATC;
|
|
}
|
|
|
|
WRW_HARPOON((ioport + hp_intstat),
|
|
(BUS_FREE | ITAR_DISC));
|
|
currSCCB->Sccb_scsistat = DISCONNECT_ST;
|
|
FPT_queueDisconnect(currSCCB, thisCard);
|
|
}
|
|
|
|
FPT_sres(ioport, thisCard, pCurrCard);
|
|
FPT_phaseDecode(ioport, thisCard);
|
|
|
|
}
|
|
|
|
else if ((hp_int & IDO_STRT) && (!(hp_int & BUS_FREE))) {
|
|
|
|
WRW_HARPOON((ioport + hp_intstat),
|
|
(IDO_STRT | XFER_CNT_0));
|
|
FPT_phaseDecode(ioport, thisCard);
|
|
|
|
}
|
|
|
|
else if ((hp_int & IUNKWN) || (hp_int & PROG_HLT)) {
|
|
WRW_HARPOON((ioport + hp_intstat),
|
|
(PHASE | IUNKWN | PROG_HLT));
|
|
if ((RD_HARPOON(ioport + hp_prgmcnt_0) & (unsigned char)
|
|
0x3f) < (unsigned char)SELCHK) {
|
|
FPT_phaseDecode(ioport, thisCard);
|
|
} else {
|
|
/* Harpoon problem some SCSI target device respond to selection
|
|
with short BUSY pulse (<400ns) this will make the Harpoon is not able
|
|
to latch the correct Target ID into reg. x53.
|
|
The work around require to correct this reg. But when write to this
|
|
reg. (0x53) also increment the FIFO write addr reg (0x6f), thus we
|
|
need to read this reg first then restore it later. After update to 0x53 */
|
|
|
|
i = (unsigned
|
|
char)(RD_HARPOON(ioport + hp_fifowrite));
|
|
target =
|
|
(unsigned
|
|
char)(RD_HARPOON(ioport + hp_gp_reg_3));
|
|
WR_HARPOON(ioport + hp_xfer_pad,
|
|
(unsigned char)ID_UNLOCK);
|
|
WR_HARPOON(ioport + hp_select_id,
|
|
(unsigned char)(target | target <<
|
|
4));
|
|
WR_HARPOON(ioport + hp_xfer_pad,
|
|
(unsigned char)0x00);
|
|
WR_HARPOON(ioport + hp_fifowrite, i);
|
|
WR_HARPOON(ioport + hp_autostart_3,
|
|
(AUTO_IMMED + TAG_STRT));
|
|
}
|
|
}
|
|
|
|
else if (hp_int & XFER_CNT_0) {
|
|
|
|
WRW_HARPOON((ioport + hp_intstat), XFER_CNT_0);
|
|
|
|
FPT_schkdd(ioport, thisCard);
|
|
|
|
}
|
|
|
|
else if (hp_int & BUS_FREE) {
|
|
|
|
WRW_HARPOON((ioport + hp_intstat), BUS_FREE);
|
|
|
|
if (pCurrCard->globalFlags & F_HOST_XFER_ACT) {
|
|
|
|
FPT_hostDataXferAbort(ioport, thisCard,
|
|
currSCCB);
|
|
}
|
|
|
|
FPT_phaseBusFree(ioport, thisCard);
|
|
}
|
|
|
|
else if (hp_int & ITICKLE) {
|
|
|
|
WRW_HARPOON((ioport + hp_intstat), ITICKLE);
|
|
pCurrCard->globalFlags |= F_NEW_SCCB_CMD;
|
|
}
|
|
|
|
if (((struct sccb_card *)pCurrCard)->
|
|
globalFlags & F_NEW_SCCB_CMD) {
|
|
|
|
pCurrCard->globalFlags &= ~F_NEW_SCCB_CMD;
|
|
|
|
if (pCurrCard->currentSCCB == NULL)
|
|
FPT_queueSearchSelect(pCurrCard, thisCard);
|
|
|
|
if (pCurrCard->currentSCCB != NULL) {
|
|
pCurrCard->globalFlags &= ~F_NEW_SCCB_CMD;
|
|
FPT_ssel(ioport, thisCard);
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
} /*end while */
|
|
|
|
MENABLE_INT(ioport);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Sccb_bad_isr
|
|
*
|
|
* Description: Some type of interrupt has occurred which is slightly
|
|
* out of the ordinary. We will now decode it fully, in
|
|
* this routine. This is broken up in an attempt to save
|
|
* processing time.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static unsigned char FPT_SccbMgr_bad_isr(u32 p_port, unsigned char p_card,
|
|
struct sccb_card *pCurrCard,
|
|
unsigned short p_int)
|
|
{
|
|
unsigned char temp, ScamFlg;
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
struct nvram_info *pCurrNvRam;
|
|
|
|
if (RD_HARPOON(p_port + hp_ext_status) &
|
|
(BM_FORCE_OFF | PCI_DEV_TMOUT | BM_PARITY_ERR | PIO_OVERRUN)) {
|
|
|
|
if (pCurrCard->globalFlags & F_HOST_XFER_ACT) {
|
|
|
|
FPT_hostDataXferAbort(p_port, p_card,
|
|
pCurrCard->currentSCCB);
|
|
}
|
|
|
|
if (RD_HARPOON(p_port + hp_pci_stat_cfg) & REC_MASTER_ABORT)
|
|
{
|
|
WR_HARPOON(p_port + hp_pci_stat_cfg,
|
|
(RD_HARPOON(p_port + hp_pci_stat_cfg) &
|
|
~REC_MASTER_ABORT));
|
|
|
|
WR_HARPOON(p_port + hp_host_blk_cnt, 0x00);
|
|
|
|
}
|
|
|
|
if (pCurrCard->currentSCCB != NULL) {
|
|
|
|
if (!pCurrCard->currentSCCB->HostStatus)
|
|
pCurrCard->currentSCCB->HostStatus =
|
|
SCCB_BM_ERR;
|
|
|
|
FPT_sxfrp(p_port, p_card);
|
|
|
|
temp = (unsigned char)(RD_HARPOON(p_port + hp_ee_ctrl) &
|
|
(EXT_ARB_ACK | SCSI_TERM_ENA_H));
|
|
WR_HARPOON(p_port + hp_ee_ctrl,
|
|
((unsigned char)temp | SEE_MS | SEE_CS));
|
|
WR_HARPOON(p_port + hp_ee_ctrl, temp);
|
|
|
|
if (!
|
|
(RDW_HARPOON((p_port + hp_intstat)) &
|
|
(BUS_FREE | RESET))) {
|
|
FPT_phaseDecode(p_port, p_card);
|
|
}
|
|
}
|
|
}
|
|
|
|
else if (p_int & RESET) {
|
|
|
|
WR_HARPOON(p_port + hp_clkctrl_0, CLKCTRL_DEFAULT);
|
|
WR_HARPOON(p_port + hp_sys_ctrl, 0x00);
|
|
if (pCurrCard->currentSCCB != NULL) {
|
|
|
|
if (pCurrCard->globalFlags & F_HOST_XFER_ACT)
|
|
|
|
FPT_hostDataXferAbort(p_port, p_card,
|
|
pCurrCard->currentSCCB);
|
|
}
|
|
|
|
DISABLE_AUTO(p_port);
|
|
|
|
FPT_sresb(p_port, p_card);
|
|
|
|
while (RD_HARPOON(p_port + hp_scsictrl_0) & SCSI_RST) {
|
|
}
|
|
|
|
pCurrNvRam = pCurrCard->pNvRamInfo;
|
|
if (pCurrNvRam) {
|
|
ScamFlg = pCurrNvRam->niScamConf;
|
|
} else {
|
|
ScamFlg =
|
|
(unsigned char)FPT_utilEERead(p_port,
|
|
SCAM_CONFIG / 2);
|
|
}
|
|
|
|
FPT_XbowInit(p_port, ScamFlg);
|
|
|
|
FPT_scini(p_card, pCurrCard->ourId, 0);
|
|
|
|
return 0xFF;
|
|
}
|
|
|
|
else if (p_int & FIFO) {
|
|
|
|
WRW_HARPOON((p_port + hp_intstat), FIFO);
|
|
|
|
if (pCurrCard->currentSCCB != NULL)
|
|
FPT_sxfrp(p_port, p_card);
|
|
}
|
|
|
|
else if (p_int & TIMEOUT) {
|
|
|
|
DISABLE_AUTO(p_port);
|
|
|
|
WRW_HARPOON((p_port + hp_intstat),
|
|
(PROG_HLT | TIMEOUT | SEL | BUS_FREE | PHASE |
|
|
IUNKWN));
|
|
|
|
pCurrCard->currentSCCB->HostStatus = SCCB_SELECTION_TIMEOUT;
|
|
|
|
currTar_Info =
|
|
&FPT_sccbMgrTbl[p_card][pCurrCard->currentSCCB->TargID];
|
|
if ((pCurrCard->globalFlags & F_CONLUN_IO)
|
|
&& ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) !=
|
|
TAG_Q_TRYING))
|
|
currTar_Info->TarLUNBusy[pCurrCard->currentSCCB->Lun] =
|
|
0;
|
|
else
|
|
currTar_Info->TarLUNBusy[0] = 0;
|
|
|
|
if (currTar_Info->TarEEValue & EE_SYNC_MASK) {
|
|
currTar_Info->TarSyncCtrl = 0;
|
|
currTar_Info->TarStatus &= ~TAR_SYNC_MASK;
|
|
}
|
|
|
|
if (currTar_Info->TarEEValue & EE_WIDE_SCSI) {
|
|
currTar_Info->TarStatus &= ~TAR_WIDE_MASK;
|
|
}
|
|
|
|
FPT_sssyncv(p_port, pCurrCard->currentSCCB->TargID, NARROW_SCSI,
|
|
currTar_Info);
|
|
|
|
FPT_queueCmdComplete(pCurrCard, pCurrCard->currentSCCB, p_card);
|
|
|
|
}
|
|
|
|
else if (p_int & SCAM_SEL) {
|
|
|
|
FPT_scarb(p_port, LEVEL2_TAR);
|
|
FPT_scsel(p_port);
|
|
FPT_scasid(p_card, p_port);
|
|
|
|
FPT_scbusf(p_port);
|
|
|
|
WRW_HARPOON((p_port + hp_intstat), SCAM_SEL);
|
|
}
|
|
|
|
return 0x00;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: SccbMgrTableInit
|
|
*
|
|
* Description: Initialize all Sccb manager data structures.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_SccbMgrTableInitAll(void)
|
|
{
|
|
unsigned char thisCard;
|
|
|
|
for (thisCard = 0; thisCard < MAX_CARDS; thisCard++) {
|
|
FPT_SccbMgrTableInitCard(&FPT_BL_Card[thisCard], thisCard);
|
|
|
|
FPT_BL_Card[thisCard].ioPort = 0x00;
|
|
FPT_BL_Card[thisCard].cardInfo = NULL;
|
|
FPT_BL_Card[thisCard].cardIndex = 0xFF;
|
|
FPT_BL_Card[thisCard].ourId = 0x00;
|
|
FPT_BL_Card[thisCard].pNvRamInfo = NULL;
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: SccbMgrTableInit
|
|
*
|
|
* Description: Initialize all Sccb manager data structures.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_SccbMgrTableInitCard(struct sccb_card *pCurrCard,
|
|
unsigned char p_card)
|
|
{
|
|
unsigned char scsiID, qtag;
|
|
|
|
for (qtag = 0; qtag < QUEUE_DEPTH; qtag++) {
|
|
FPT_BL_Card[p_card].discQ_Tbl[qtag] = NULL;
|
|
}
|
|
|
|
for (scsiID = 0; scsiID < MAX_SCSI_TAR; scsiID++) {
|
|
FPT_sccbMgrTbl[p_card][scsiID].TarStatus = 0;
|
|
FPT_sccbMgrTbl[p_card][scsiID].TarEEValue = 0;
|
|
FPT_SccbMgrTableInitTarget(p_card, scsiID);
|
|
}
|
|
|
|
pCurrCard->scanIndex = 0x00;
|
|
pCurrCard->currentSCCB = NULL;
|
|
pCurrCard->globalFlags = 0x00;
|
|
pCurrCard->cmdCounter = 0x00;
|
|
pCurrCard->tagQ_Lst = 0x01;
|
|
pCurrCard->discQCount = 0;
|
|
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: SccbMgrTableInit
|
|
*
|
|
* Description: Initialize all Sccb manager data structures.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_SccbMgrTableInitTarget(unsigned char p_card,
|
|
unsigned char target)
|
|
{
|
|
|
|
unsigned char lun, qtag;
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][target];
|
|
|
|
currTar_Info->TarSelQ_Cnt = 0;
|
|
currTar_Info->TarSyncCtrl = 0;
|
|
|
|
currTar_Info->TarSelQ_Head = NULL;
|
|
currTar_Info->TarSelQ_Tail = NULL;
|
|
currTar_Info->TarTagQ_Cnt = 0;
|
|
currTar_Info->TarLUN_CA = 0;
|
|
|
|
for (lun = 0; lun < MAX_LUN; lun++) {
|
|
currTar_Info->TarLUNBusy[lun] = 0;
|
|
currTar_Info->LunDiscQ_Idx[lun] = 0;
|
|
}
|
|
|
|
for (qtag = 0; qtag < QUEUE_DEPTH; qtag++) {
|
|
if (FPT_BL_Card[p_card].discQ_Tbl[qtag] != NULL) {
|
|
if (FPT_BL_Card[p_card].discQ_Tbl[qtag]->TargID ==
|
|
target) {
|
|
FPT_BL_Card[p_card].discQ_Tbl[qtag] = NULL;
|
|
FPT_BL_Card[p_card].discQCount--;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: sfetm
|
|
*
|
|
* Description: Read in a message byte from the SCSI bus, and check
|
|
* for a parity error.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static unsigned char FPT_sfm(u32 port, struct sccb *pCurrSCCB)
|
|
{
|
|
unsigned char message;
|
|
unsigned short TimeOutLoop;
|
|
|
|
TimeOutLoop = 0;
|
|
while ((!(RD_HARPOON(port + hp_scsisig) & SCSI_REQ)) &&
|
|
(TimeOutLoop++ < 20000)) {
|
|
}
|
|
|
|
WR_HARPOON(port + hp_portctrl_0, SCSI_PORT);
|
|
|
|
message = RD_HARPOON(port + hp_scsidata_0);
|
|
|
|
WR_HARPOON(port + hp_scsisig, SCSI_ACK + S_MSGI_PH);
|
|
|
|
if (TimeOutLoop > 20000)
|
|
message = 0x00; /* force message byte = 0 if Time Out on Req */
|
|
|
|
if ((RDW_HARPOON((port + hp_intstat)) & PARITY) &&
|
|
(RD_HARPOON(port + hp_addstat) & SCSI_PAR_ERR)) {
|
|
WR_HARPOON(port + hp_scsisig, (SCSI_ACK + S_ILL_PH));
|
|
WR_HARPOON(port + hp_xferstat, 0);
|
|
WR_HARPOON(port + hp_fiforead, 0);
|
|
WR_HARPOON(port + hp_fifowrite, 0);
|
|
if (pCurrSCCB != NULL) {
|
|
pCurrSCCB->Sccb_scsimsg = SMPARITY;
|
|
}
|
|
message = 0x00;
|
|
do {
|
|
ACCEPT_MSG_ATN(port);
|
|
TimeOutLoop = 0;
|
|
while ((!(RD_HARPOON(port + hp_scsisig) & SCSI_REQ)) &&
|
|
(TimeOutLoop++ < 20000)) {
|
|
}
|
|
if (TimeOutLoop > 20000) {
|
|
WRW_HARPOON((port + hp_intstat), PARITY);
|
|
return message;
|
|
}
|
|
if ((RD_HARPOON(port + hp_scsisig) & S_SCSI_PHZ) !=
|
|
S_MSGI_PH) {
|
|
WRW_HARPOON((port + hp_intstat), PARITY);
|
|
return message;
|
|
}
|
|
WR_HARPOON(port + hp_portctrl_0, SCSI_PORT);
|
|
|
|
RD_HARPOON(port + hp_scsidata_0);
|
|
|
|
WR_HARPOON(port + hp_scsisig, (SCSI_ACK + S_ILL_PH));
|
|
|
|
} while (1);
|
|
|
|
}
|
|
WR_HARPOON(port + hp_scsisig, (SCSI_ACK + S_ILL_PH));
|
|
WR_HARPOON(port + hp_xferstat, 0);
|
|
WR_HARPOON(port + hp_fiforead, 0);
|
|
WR_HARPOON(port + hp_fifowrite, 0);
|
|
return message;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_ssel
|
|
*
|
|
* Description: Load up automation and select target device.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_ssel(u32 port, unsigned char p_card)
|
|
{
|
|
|
|
unsigned char auto_loaded, i, target, *theCCB;
|
|
|
|
u32 cdb_reg;
|
|
struct sccb_card *CurrCard;
|
|
struct sccb *currSCCB;
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
unsigned char lastTag, lun;
|
|
|
|
CurrCard = &FPT_BL_Card[p_card];
|
|
currSCCB = CurrCard->currentSCCB;
|
|
target = currSCCB->TargID;
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][target];
|
|
lastTag = CurrCard->tagQ_Lst;
|
|
|
|
ARAM_ACCESS(port);
|
|
|
|
if ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) == TAG_Q_REJECT)
|
|
currSCCB->ControlByte &= ~F_USE_CMD_Q;
|
|
|
|
if (((CurrCard->globalFlags & F_CONLUN_IO) &&
|
|
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING)))
|
|
|
|
lun = currSCCB->Lun;
|
|
else
|
|
lun = 0;
|
|
|
|
if (CurrCard->globalFlags & F_TAG_STARTED) {
|
|
if (!(currSCCB->ControlByte & F_USE_CMD_Q)) {
|
|
if ((currTar_Info->TarLUN_CA == 0)
|
|
&& ((currTar_Info->TarStatus & TAR_TAG_Q_MASK)
|
|
== TAG_Q_TRYING)) {
|
|
|
|
if (currTar_Info->TarTagQ_Cnt != 0) {
|
|
currTar_Info->TarLUNBusy[lun] = 1;
|
|
FPT_queueSelectFail(CurrCard, p_card);
|
|
SGRAM_ACCESS(port);
|
|
return;
|
|
}
|
|
|
|
else {
|
|
currTar_Info->TarLUNBusy[lun] = 1;
|
|
}
|
|
|
|
}
|
|
/*End non-tagged */
|
|
else {
|
|
currTar_Info->TarLUNBusy[lun] = 1;
|
|
}
|
|
|
|
}
|
|
/*!Use cmd Q Tagged */
|
|
else {
|
|
if (currTar_Info->TarLUN_CA == 1) {
|
|
FPT_queueSelectFail(CurrCard, p_card);
|
|
SGRAM_ACCESS(port);
|
|
return;
|
|
}
|
|
|
|
currTar_Info->TarLUNBusy[lun] = 1;
|
|
|
|
} /*else use cmd Q tagged */
|
|
|
|
}
|
|
/*if glob tagged started */
|
|
else {
|
|
currTar_Info->TarLUNBusy[lun] = 1;
|
|
}
|
|
|
|
if ((((CurrCard->globalFlags & F_CONLUN_IO) &&
|
|
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
|
|
|| (!(currSCCB->ControlByte & F_USE_CMD_Q)))) {
|
|
if (CurrCard->discQCount >= QUEUE_DEPTH) {
|
|
currTar_Info->TarLUNBusy[lun] = 1;
|
|
FPT_queueSelectFail(CurrCard, p_card);
|
|
SGRAM_ACCESS(port);
|
|
return;
|
|
}
|
|
for (i = 1; i < QUEUE_DEPTH; i++) {
|
|
if (++lastTag >= QUEUE_DEPTH)
|
|
lastTag = 1;
|
|
if (CurrCard->discQ_Tbl[lastTag] == NULL) {
|
|
CurrCard->tagQ_Lst = lastTag;
|
|
currTar_Info->LunDiscQ_Idx[lun] = lastTag;
|
|
CurrCard->discQ_Tbl[lastTag] = currSCCB;
|
|
CurrCard->discQCount++;
|
|
break;
|
|
}
|
|
}
|
|
if (i == QUEUE_DEPTH) {
|
|
currTar_Info->TarLUNBusy[lun] = 1;
|
|
FPT_queueSelectFail(CurrCard, p_card);
|
|
SGRAM_ACCESS(port);
|
|
return;
|
|
}
|
|
}
|
|
|
|
auto_loaded = 0;
|
|
|
|
WR_HARPOON(port + hp_select_id, target);
|
|
WR_HARPOON(port + hp_gp_reg_3, target); /* Use by new automation logic */
|
|
|
|
if (currSCCB->OperationCode == RESET_COMMAND) {
|
|
WRW_HARPOON((port + ID_MSG_STRT), (MPM_OP + AMSG_OUT +
|
|
(currSCCB->
|
|
Sccb_idmsg & ~DISC_PRIV)));
|
|
|
|
WRW_HARPOON((port + ID_MSG_STRT + 2), BRH_OP + ALWAYS + NP);
|
|
|
|
currSCCB->Sccb_scsimsg = SMDEV_RESET;
|
|
|
|
WR_HARPOON(port + hp_autostart_3, (SELECT + SELCHK_STRT));
|
|
auto_loaded = 1;
|
|
currSCCB->Sccb_scsistat = SELECT_BDR_ST;
|
|
|
|
if (currTar_Info->TarEEValue & EE_SYNC_MASK) {
|
|
currTar_Info->TarSyncCtrl = 0;
|
|
currTar_Info->TarStatus &= ~TAR_SYNC_MASK;
|
|
}
|
|
|
|
if (currTar_Info->TarEEValue & EE_WIDE_SCSI) {
|
|
currTar_Info->TarStatus &= ~TAR_WIDE_MASK;
|
|
}
|
|
|
|
FPT_sssyncv(port, target, NARROW_SCSI, currTar_Info);
|
|
FPT_SccbMgrTableInitTarget(p_card, target);
|
|
|
|
}
|
|
|
|
else if (currSCCB->Sccb_scsistat == ABORT_ST) {
|
|
WRW_HARPOON((port + ID_MSG_STRT), (MPM_OP + AMSG_OUT +
|
|
(currSCCB->
|
|
Sccb_idmsg & ~DISC_PRIV)));
|
|
|
|
WRW_HARPOON((port + ID_MSG_STRT + 2), BRH_OP + ALWAYS + CMDPZ);
|
|
|
|
WRW_HARPOON((port + SYNC_MSGS + 0), (MPM_OP + AMSG_OUT +
|
|
(((unsigned
|
|
char)(currSCCB->
|
|
ControlByte &
|
|
TAG_TYPE_MASK)
|
|
>> 6) | (unsigned char)
|
|
0x20)));
|
|
WRW_HARPOON((port + SYNC_MSGS + 2),
|
|
(MPM_OP + AMSG_OUT + currSCCB->Sccb_tag));
|
|
WRW_HARPOON((port + SYNC_MSGS + 4), (BRH_OP + ALWAYS + NP));
|
|
|
|
WR_HARPOON(port + hp_autostart_3, (SELECT + SELCHK_STRT));
|
|
auto_loaded = 1;
|
|
|
|
}
|
|
|
|
else if (!(currTar_Info->TarStatus & WIDE_NEGOCIATED)) {
|
|
auto_loaded = FPT_siwidn(port, p_card);
|
|
currSCCB->Sccb_scsistat = SELECT_WN_ST;
|
|
}
|
|
|
|
else if (!((currTar_Info->TarStatus & TAR_SYNC_MASK)
|
|
== SYNC_SUPPORTED)) {
|
|
auto_loaded = FPT_sisyncn(port, p_card, 0);
|
|
currSCCB->Sccb_scsistat = SELECT_SN_ST;
|
|
}
|
|
|
|
if (!auto_loaded) {
|
|
|
|
if (currSCCB->ControlByte & F_USE_CMD_Q) {
|
|
|
|
CurrCard->globalFlags |= F_TAG_STARTED;
|
|
|
|
if ((currTar_Info->TarStatus & TAR_TAG_Q_MASK)
|
|
== TAG_Q_REJECT) {
|
|
currSCCB->ControlByte &= ~F_USE_CMD_Q;
|
|
|
|
/* Fix up the start instruction with a jump to
|
|
Non-Tag-CMD handling */
|
|
WRW_HARPOON((port + ID_MSG_STRT),
|
|
BRH_OP + ALWAYS + NTCMD);
|
|
|
|
WRW_HARPOON((port + NON_TAG_ID_MSG),
|
|
(MPM_OP + AMSG_OUT +
|
|
currSCCB->Sccb_idmsg));
|
|
|
|
WR_HARPOON(port + hp_autostart_3,
|
|
(SELECT + SELCHK_STRT));
|
|
|
|
/* Setup our STATE so we know what happened when
|
|
the wheels fall off. */
|
|
currSCCB->Sccb_scsistat = SELECT_ST;
|
|
|
|
currTar_Info->TarLUNBusy[lun] = 1;
|
|
}
|
|
|
|
else {
|
|
WRW_HARPOON((port + ID_MSG_STRT),
|
|
(MPM_OP + AMSG_OUT +
|
|
currSCCB->Sccb_idmsg));
|
|
|
|
WRW_HARPOON((port + ID_MSG_STRT + 2),
|
|
(MPM_OP + AMSG_OUT +
|
|
(((unsigned char)(currSCCB->
|
|
ControlByte &
|
|
TAG_TYPE_MASK)
|
|
>> 6) | (unsigned char)0x20)));
|
|
|
|
for (i = 1; i < QUEUE_DEPTH; i++) {
|
|
if (++lastTag >= QUEUE_DEPTH)
|
|
lastTag = 1;
|
|
if (CurrCard->discQ_Tbl[lastTag] ==
|
|
NULL) {
|
|
WRW_HARPOON((port +
|
|
ID_MSG_STRT + 6),
|
|
(MPM_OP + AMSG_OUT +
|
|
lastTag));
|
|
CurrCard->tagQ_Lst = lastTag;
|
|
currSCCB->Sccb_tag = lastTag;
|
|
CurrCard->discQ_Tbl[lastTag] =
|
|
currSCCB;
|
|
CurrCard->discQCount++;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == QUEUE_DEPTH) {
|
|
currTar_Info->TarLUNBusy[lun] = 1;
|
|
FPT_queueSelectFail(CurrCard, p_card);
|
|
SGRAM_ACCESS(port);
|
|
return;
|
|
}
|
|
|
|
currSCCB->Sccb_scsistat = SELECT_Q_ST;
|
|
|
|
WR_HARPOON(port + hp_autostart_3,
|
|
(SELECT + SELCHK_STRT));
|
|
}
|
|
}
|
|
|
|
else {
|
|
|
|
WRW_HARPOON((port + ID_MSG_STRT),
|
|
BRH_OP + ALWAYS + NTCMD);
|
|
|
|
WRW_HARPOON((port + NON_TAG_ID_MSG),
|
|
(MPM_OP + AMSG_OUT + currSCCB->Sccb_idmsg));
|
|
|
|
currSCCB->Sccb_scsistat = SELECT_ST;
|
|
|
|
WR_HARPOON(port + hp_autostart_3,
|
|
(SELECT + SELCHK_STRT));
|
|
}
|
|
|
|
theCCB = (unsigned char *)&currSCCB->Cdb[0];
|
|
|
|
cdb_reg = port + CMD_STRT;
|
|
|
|
for (i = 0; i < currSCCB->CdbLength; i++) {
|
|
WRW_HARPOON(cdb_reg, (MPM_OP + ACOMMAND + *theCCB));
|
|
cdb_reg += 2;
|
|
theCCB++;
|
|
}
|
|
|
|
if (currSCCB->CdbLength != TWELVE_BYTE_CMD)
|
|
WRW_HARPOON(cdb_reg, (BRH_OP + ALWAYS + NP));
|
|
|
|
}
|
|
/* auto_loaded */
|
|
WRW_HARPOON((port + hp_fiforead), (unsigned short)0x00);
|
|
WR_HARPOON(port + hp_xferstat, 0x00);
|
|
|
|
WRW_HARPOON((port + hp_intstat), (PROG_HLT | TIMEOUT | SEL | BUS_FREE));
|
|
|
|
WR_HARPOON(port + hp_portctrl_0, (SCSI_PORT));
|
|
|
|
if (!(currSCCB->Sccb_MGRFlags & F_DEV_SELECTED)) {
|
|
WR_HARPOON(port + hp_scsictrl_0,
|
|
(SEL_TAR | ENA_ATN | ENA_RESEL | ENA_SCAM_SEL));
|
|
} else {
|
|
|
|
/* auto_loaded = (RD_HARPOON(port+hp_autostart_3) & (unsigned char)0x1F);
|
|
auto_loaded |= AUTO_IMMED; */
|
|
auto_loaded = AUTO_IMMED;
|
|
|
|
DISABLE_AUTO(port);
|
|
|
|
WR_HARPOON(port + hp_autostart_3, auto_loaded);
|
|
}
|
|
|
|
SGRAM_ACCESS(port);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_sres
|
|
*
|
|
* Description: Hookup the correct CCB and handle the incoming messages.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_sres(u32 port, unsigned char p_card,
|
|
struct sccb_card *pCurrCard)
|
|
{
|
|
|
|
unsigned char our_target, message, lun = 0, tag, msgRetryCount;
|
|
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
struct sccb *currSCCB;
|
|
|
|
if (pCurrCard->currentSCCB != NULL) {
|
|
currTar_Info =
|
|
&FPT_sccbMgrTbl[p_card][pCurrCard->currentSCCB->TargID];
|
|
DISABLE_AUTO(port);
|
|
|
|
WR_HARPOON((port + hp_scsictrl_0), (ENA_RESEL | ENA_SCAM_SEL));
|
|
|
|
currSCCB = pCurrCard->currentSCCB;
|
|
if (currSCCB->Sccb_scsistat == SELECT_WN_ST) {
|
|
currTar_Info->TarStatus &= ~TAR_WIDE_MASK;
|
|
currSCCB->Sccb_scsistat = BUS_FREE_ST;
|
|
}
|
|
if (currSCCB->Sccb_scsistat == SELECT_SN_ST) {
|
|
currTar_Info->TarStatus &= ~TAR_SYNC_MASK;
|
|
currSCCB->Sccb_scsistat = BUS_FREE_ST;
|
|
}
|
|
if (((pCurrCard->globalFlags & F_CONLUN_IO) &&
|
|
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) !=
|
|
TAG_Q_TRYING))) {
|
|
currTar_Info->TarLUNBusy[currSCCB->Lun] = 0;
|
|
if (currSCCB->Sccb_scsistat != ABORT_ST) {
|
|
pCurrCard->discQCount--;
|
|
pCurrCard->discQ_Tbl[currTar_Info->
|
|
LunDiscQ_Idx[currSCCB->
|
|
Lun]]
|
|
= NULL;
|
|
}
|
|
} else {
|
|
currTar_Info->TarLUNBusy[0] = 0;
|
|
if (currSCCB->Sccb_tag) {
|
|
if (currSCCB->Sccb_scsistat != ABORT_ST) {
|
|
pCurrCard->discQCount--;
|
|
pCurrCard->discQ_Tbl[currSCCB->
|
|
Sccb_tag] = NULL;
|
|
}
|
|
} else {
|
|
if (currSCCB->Sccb_scsistat != ABORT_ST) {
|
|
pCurrCard->discQCount--;
|
|
pCurrCard->discQ_Tbl[currTar_Info->
|
|
LunDiscQ_Idx[0]] =
|
|
NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
FPT_queueSelectFail(&FPT_BL_Card[p_card], p_card);
|
|
}
|
|
|
|
WRW_HARPOON((port + hp_fiforead), (unsigned short)0x00);
|
|
|
|
our_target = (unsigned char)(RD_HARPOON(port + hp_select_id) >> 4);
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][our_target];
|
|
|
|
msgRetryCount = 0;
|
|
do {
|
|
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][our_target];
|
|
tag = 0;
|
|
|
|
while (!(RD_HARPOON(port + hp_scsisig) & SCSI_REQ)) {
|
|
if (!(RD_HARPOON(port + hp_scsisig) & SCSI_BSY)) {
|
|
|
|
WRW_HARPOON((port + hp_intstat), PHASE);
|
|
return;
|
|
}
|
|
}
|
|
|
|
WRW_HARPOON((port + hp_intstat), PHASE);
|
|
if ((RD_HARPOON(port + hp_scsisig) & S_SCSI_PHZ) == S_MSGI_PH) {
|
|
|
|
message = FPT_sfm(port, pCurrCard->currentSCCB);
|
|
if (message) {
|
|
|
|
if (message <= (0x80 | LUN_MASK)) {
|
|
lun = message & (unsigned char)LUN_MASK;
|
|
|
|
if ((currTar_Info->
|
|
TarStatus & TAR_TAG_Q_MASK) ==
|
|
TAG_Q_TRYING) {
|
|
if (currTar_Info->TarTagQ_Cnt !=
|
|
0) {
|
|
|
|
if (!
|
|
(currTar_Info->
|
|
TarLUN_CA)) {
|
|
ACCEPT_MSG(port); /*Release the ACK for ID msg. */
|
|
|
|
message =
|
|
FPT_sfm
|
|
(port,
|
|
pCurrCard->
|
|
currentSCCB);
|
|
if (message) {
|
|
ACCEPT_MSG
|
|
(port);
|
|
}
|
|
|
|
else
|
|
message
|
|
= 0;
|
|
|
|
if (message !=
|
|
0) {
|
|
tag =
|
|
FPT_sfm
|
|
(port,
|
|
pCurrCard->
|
|
currentSCCB);
|
|
|
|
if (!
|
|
(tag))
|
|
message
|
|
=
|
|
0;
|
|
}
|
|
|
|
}
|
|
/*C.A. exists! */
|
|
}
|
|
/*End Q cnt != 0 */
|
|
}
|
|
/*End Tag cmds supported! */
|
|
}
|
|
/*End valid ID message. */
|
|
else {
|
|
|
|
ACCEPT_MSG_ATN(port);
|
|
}
|
|
|
|
}
|
|
/* End good id message. */
|
|
else {
|
|
|
|
message = 0;
|
|
}
|
|
} else {
|
|
ACCEPT_MSG_ATN(port);
|
|
|
|
while (!
|
|
(RDW_HARPOON((port + hp_intstat)) &
|
|
(PHASE | RESET))
|
|
&& !(RD_HARPOON(port + hp_scsisig) & SCSI_REQ)
|
|
&& (RD_HARPOON(port + hp_scsisig) & SCSI_BSY)) ;
|
|
|
|
return;
|
|
}
|
|
|
|
if (message == 0) {
|
|
msgRetryCount++;
|
|
if (msgRetryCount == 1) {
|
|
FPT_SendMsg(port, SMPARITY);
|
|
} else {
|
|
FPT_SendMsg(port, SMDEV_RESET);
|
|
|
|
FPT_sssyncv(port, our_target, NARROW_SCSI,
|
|
currTar_Info);
|
|
|
|
if (FPT_sccbMgrTbl[p_card][our_target].
|
|
TarEEValue & EE_SYNC_MASK) {
|
|
|
|
FPT_sccbMgrTbl[p_card][our_target].
|
|
TarStatus &= ~TAR_SYNC_MASK;
|
|
|
|
}
|
|
|
|
if (FPT_sccbMgrTbl[p_card][our_target].
|
|
TarEEValue & EE_WIDE_SCSI) {
|
|
|
|
FPT_sccbMgrTbl[p_card][our_target].
|
|
TarStatus &= ~TAR_WIDE_MASK;
|
|
}
|
|
|
|
FPT_queueFlushTargSccb(p_card, our_target,
|
|
SCCB_COMPLETE);
|
|
FPT_SccbMgrTableInitTarget(p_card, our_target);
|
|
return;
|
|
}
|
|
}
|
|
} while (message == 0);
|
|
|
|
if (((pCurrCard->globalFlags & F_CONLUN_IO) &&
|
|
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))) {
|
|
currTar_Info->TarLUNBusy[lun] = 1;
|
|
pCurrCard->currentSCCB =
|
|
pCurrCard->discQ_Tbl[currTar_Info->LunDiscQ_Idx[lun]];
|
|
if (pCurrCard->currentSCCB != NULL) {
|
|
ACCEPT_MSG(port);
|
|
} else {
|
|
ACCEPT_MSG_ATN(port);
|
|
}
|
|
} else {
|
|
currTar_Info->TarLUNBusy[0] = 1;
|
|
|
|
if (tag) {
|
|
if (pCurrCard->discQ_Tbl[tag] != NULL) {
|
|
pCurrCard->currentSCCB =
|
|
pCurrCard->discQ_Tbl[tag];
|
|
currTar_Info->TarTagQ_Cnt--;
|
|
ACCEPT_MSG(port);
|
|
} else {
|
|
ACCEPT_MSG_ATN(port);
|
|
}
|
|
} else {
|
|
pCurrCard->currentSCCB =
|
|
pCurrCard->discQ_Tbl[currTar_Info->LunDiscQ_Idx[0]];
|
|
if (pCurrCard->currentSCCB != NULL) {
|
|
ACCEPT_MSG(port);
|
|
} else {
|
|
ACCEPT_MSG_ATN(port);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (pCurrCard->currentSCCB != NULL) {
|
|
if (pCurrCard->currentSCCB->Sccb_scsistat == ABORT_ST) {
|
|
/* During Abort Tag command, the target could have got re-selected
|
|
and completed the command. Check the select Q and remove the CCB
|
|
if it is in the Select Q */
|
|
FPT_queueFindSccb(pCurrCard->currentSCCB, p_card);
|
|
}
|
|
}
|
|
|
|
while (!(RDW_HARPOON((port + hp_intstat)) & (PHASE | RESET)) &&
|
|
!(RD_HARPOON(port + hp_scsisig) & SCSI_REQ) &&
|
|
(RD_HARPOON(port + hp_scsisig) & SCSI_BSY)) ;
|
|
}
|
|
|
|
static void FPT_SendMsg(u32 port, unsigned char message)
|
|
{
|
|
while (!(RD_HARPOON(port + hp_scsisig) & SCSI_REQ)) {
|
|
if (!(RD_HARPOON(port + hp_scsisig) & SCSI_BSY)) {
|
|
|
|
WRW_HARPOON((port + hp_intstat), PHASE);
|
|
return;
|
|
}
|
|
}
|
|
|
|
WRW_HARPOON((port + hp_intstat), PHASE);
|
|
if ((RD_HARPOON(port + hp_scsisig) & S_SCSI_PHZ) == S_MSGO_PH) {
|
|
WRW_HARPOON((port + hp_intstat),
|
|
(BUS_FREE | PHASE | XFER_CNT_0));
|
|
|
|
WR_HARPOON(port + hp_portctrl_0, SCSI_BUS_EN);
|
|
|
|
WR_HARPOON(port + hp_scsidata_0, message);
|
|
|
|
WR_HARPOON(port + hp_scsisig, (SCSI_ACK + S_ILL_PH));
|
|
|
|
ACCEPT_MSG(port);
|
|
|
|
WR_HARPOON(port + hp_portctrl_0, 0x00);
|
|
|
|
if ((message == SMABORT) || (message == SMDEV_RESET) ||
|
|
(message == SMABORT_TAG)) {
|
|
while (!
|
|
(RDW_HARPOON((port + hp_intstat)) &
|
|
(BUS_FREE | PHASE))) {
|
|
}
|
|
|
|
if (RDW_HARPOON((port + hp_intstat)) & BUS_FREE) {
|
|
WRW_HARPOON((port + hp_intstat), BUS_FREE);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_sdecm
|
|
*
|
|
* Description: Determine the proper response to the message from the
|
|
* target device.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FPT_sdecm(unsigned char message, u32 port, unsigned char p_card)
|
|
{
|
|
struct sccb *currSCCB;
|
|
struct sccb_card *CurrCard;
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
|
|
CurrCard = &FPT_BL_Card[p_card];
|
|
currSCCB = CurrCard->currentSCCB;
|
|
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID];
|
|
|
|
if (message == SMREST_DATA_PTR) {
|
|
if (!(currSCCB->Sccb_XferState & F_NO_DATA_YET)) {
|
|
currSCCB->Sccb_ATC = currSCCB->Sccb_savedATC;
|
|
|
|
FPT_hostDataXferRestart(currSCCB);
|
|
}
|
|
|
|
ACCEPT_MSG(port);
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
}
|
|
|
|
else if (message == SMCMD_COMP) {
|
|
|
|
if (currSCCB->Sccb_scsistat == SELECT_Q_ST) {
|
|
currTar_Info->TarStatus &=
|
|
~(unsigned char)TAR_TAG_Q_MASK;
|
|
currTar_Info->TarStatus |= (unsigned char)TAG_Q_REJECT;
|
|
}
|
|
|
|
ACCEPT_MSG(port);
|
|
|
|
}
|
|
|
|
else if ((message == SMNO_OP) || (message >= SMIDENT)
|
|
|| (message == SMINIT_RECOVERY) || (message == SMREL_RECOVERY)) {
|
|
|
|
ACCEPT_MSG(port);
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
}
|
|
|
|
else if (message == SMREJECT) {
|
|
|
|
if ((currSCCB->Sccb_scsistat == SELECT_SN_ST) ||
|
|
(currSCCB->Sccb_scsistat == SELECT_WN_ST) ||
|
|
((currTar_Info->TarStatus & TAR_SYNC_MASK) == SYNC_TRYING)
|
|
|| ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) ==
|
|
TAG_Q_TRYING))
|
|
{
|
|
WRW_HARPOON((port + hp_intstat), BUS_FREE);
|
|
|
|
ACCEPT_MSG(port);
|
|
|
|
while ((!(RD_HARPOON(port + hp_scsisig) & SCSI_REQ)) &&
|
|
(!(RDW_HARPOON((port + hp_intstat)) & BUS_FREE)))
|
|
{
|
|
}
|
|
|
|
if (currSCCB->Lun == 0x00) {
|
|
if (currSCCB->Sccb_scsistat == SELECT_SN_ST) {
|
|
|
|
currTar_Info->TarStatus |=
|
|
(unsigned char)SYNC_SUPPORTED;
|
|
|
|
currTar_Info->TarEEValue &=
|
|
~EE_SYNC_MASK;
|
|
}
|
|
|
|
else if (currSCCB->Sccb_scsistat ==
|
|
SELECT_WN_ST) {
|
|
|
|
currTar_Info->TarStatus =
|
|
(currTar_Info->
|
|
TarStatus & ~WIDE_ENABLED) |
|
|
WIDE_NEGOCIATED;
|
|
|
|
currTar_Info->TarEEValue &=
|
|
~EE_WIDE_SCSI;
|
|
|
|
}
|
|
|
|
else if ((currTar_Info->
|
|
TarStatus & TAR_TAG_Q_MASK) ==
|
|
TAG_Q_TRYING) {
|
|
currTar_Info->TarStatus =
|
|
(currTar_Info->
|
|
TarStatus & ~(unsigned char)
|
|
TAR_TAG_Q_MASK) | TAG_Q_REJECT;
|
|
|
|
currSCCB->ControlByte &= ~F_USE_CMD_Q;
|
|
CurrCard->discQCount--;
|
|
CurrCard->discQ_Tbl[currSCCB->
|
|
Sccb_tag] = NULL;
|
|
currSCCB->Sccb_tag = 0x00;
|
|
|
|
}
|
|
}
|
|
|
|
if (RDW_HARPOON((port + hp_intstat)) & BUS_FREE) {
|
|
|
|
if (currSCCB->Lun == 0x00) {
|
|
WRW_HARPOON((port + hp_intstat),
|
|
BUS_FREE);
|
|
CurrCard->globalFlags |= F_NEW_SCCB_CMD;
|
|
}
|
|
}
|
|
|
|
else {
|
|
|
|
if ((CurrCard->globalFlags & F_CONLUN_IO) &&
|
|
((currTar_Info->
|
|
TarStatus & TAR_TAG_Q_MASK) !=
|
|
TAG_Q_TRYING))
|
|
currTar_Info->TarLUNBusy[currSCCB->
|
|
Lun] = 1;
|
|
else
|
|
currTar_Info->TarLUNBusy[0] = 1;
|
|
|
|
currSCCB->ControlByte &=
|
|
~(unsigned char)F_USE_CMD_Q;
|
|
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
|
|
}
|
|
}
|
|
|
|
else {
|
|
ACCEPT_MSG(port);
|
|
|
|
while ((!(RD_HARPOON(port + hp_scsisig) & SCSI_REQ)) &&
|
|
(!(RDW_HARPOON((port + hp_intstat)) & BUS_FREE)))
|
|
{
|
|
}
|
|
|
|
if (!(RDW_HARPOON((port + hp_intstat)) & BUS_FREE)) {
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
}
|
|
}
|
|
}
|
|
|
|
else if (message == SMEXT) {
|
|
|
|
ACCEPT_MSG(port);
|
|
FPT_shandem(port, p_card, currSCCB);
|
|
}
|
|
|
|
else if (message == SMIGNORWR) {
|
|
|
|
ACCEPT_MSG(port); /* ACK the RESIDUE MSG */
|
|
|
|
message = FPT_sfm(port, currSCCB);
|
|
|
|
if (currSCCB->Sccb_scsimsg != SMPARITY)
|
|
ACCEPT_MSG(port);
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
}
|
|
|
|
else {
|
|
|
|
currSCCB->HostStatus = SCCB_PHASE_SEQUENCE_FAIL;
|
|
currSCCB->Sccb_scsimsg = SMREJECT;
|
|
|
|
ACCEPT_MSG_ATN(port);
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_shandem
|
|
*
|
|
* Description: Decide what to do with the extended message.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FPT_shandem(u32 port, unsigned char p_card, struct sccb *pCurrSCCB)
|
|
{
|
|
unsigned char length, message;
|
|
|
|
length = FPT_sfm(port, pCurrSCCB);
|
|
if (length) {
|
|
|
|
ACCEPT_MSG(port);
|
|
message = FPT_sfm(port, pCurrSCCB);
|
|
if (message) {
|
|
|
|
if (message == SMSYNC) {
|
|
|
|
if (length == 0x03) {
|
|
|
|
ACCEPT_MSG(port);
|
|
FPT_stsyncn(port, p_card);
|
|
} else {
|
|
|
|
pCurrSCCB->Sccb_scsimsg = SMREJECT;
|
|
ACCEPT_MSG_ATN(port);
|
|
}
|
|
} else if (message == SMWDTR) {
|
|
|
|
if (length == 0x02) {
|
|
|
|
ACCEPT_MSG(port);
|
|
FPT_stwidn(port, p_card);
|
|
} else {
|
|
|
|
pCurrSCCB->Sccb_scsimsg = SMREJECT;
|
|
ACCEPT_MSG_ATN(port);
|
|
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED +
|
|
DISCONNECT_START));
|
|
}
|
|
} else {
|
|
|
|
pCurrSCCB->Sccb_scsimsg = SMREJECT;
|
|
ACCEPT_MSG_ATN(port);
|
|
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
}
|
|
} else {
|
|
if (pCurrSCCB->Sccb_scsimsg != SMPARITY)
|
|
ACCEPT_MSG(port);
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
}
|
|
} else {
|
|
if (pCurrSCCB->Sccb_scsimsg == SMPARITY)
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_sisyncn
|
|
*
|
|
* Description: Read in a message byte from the SCSI bus, and check
|
|
* for a parity error.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static unsigned char FPT_sisyncn(u32 port, unsigned char p_card,
|
|
unsigned char syncFlag)
|
|
{
|
|
struct sccb *currSCCB;
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
|
|
currSCCB = FPT_BL_Card[p_card].currentSCCB;
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID];
|
|
|
|
if (!((currTar_Info->TarStatus & TAR_SYNC_MASK) == SYNC_TRYING)) {
|
|
|
|
WRW_HARPOON((port + ID_MSG_STRT),
|
|
(MPM_OP + AMSG_OUT +
|
|
(currSCCB->
|
|
Sccb_idmsg & ~(unsigned char)DISC_PRIV)));
|
|
|
|
WRW_HARPOON((port + ID_MSG_STRT + 2), BRH_OP + ALWAYS + CMDPZ);
|
|
|
|
WRW_HARPOON((port + SYNC_MSGS + 0),
|
|
(MPM_OP + AMSG_OUT + SMEXT));
|
|
WRW_HARPOON((port + SYNC_MSGS + 2), (MPM_OP + AMSG_OUT + 0x03));
|
|
WRW_HARPOON((port + SYNC_MSGS + 4),
|
|
(MPM_OP + AMSG_OUT + SMSYNC));
|
|
|
|
if ((currTar_Info->TarEEValue & EE_SYNC_MASK) == EE_SYNC_20MB)
|
|
|
|
WRW_HARPOON((port + SYNC_MSGS + 6),
|
|
(MPM_OP + AMSG_OUT + 12));
|
|
|
|
else if ((currTar_Info->TarEEValue & EE_SYNC_MASK) ==
|
|
EE_SYNC_10MB)
|
|
|
|
WRW_HARPOON((port + SYNC_MSGS + 6),
|
|
(MPM_OP + AMSG_OUT + 25));
|
|
|
|
else if ((currTar_Info->TarEEValue & EE_SYNC_MASK) ==
|
|
EE_SYNC_5MB)
|
|
|
|
WRW_HARPOON((port + SYNC_MSGS + 6),
|
|
(MPM_OP + AMSG_OUT + 50));
|
|
|
|
else
|
|
WRW_HARPOON((port + SYNC_MSGS + 6),
|
|
(MPM_OP + AMSG_OUT + 00));
|
|
|
|
WRW_HARPOON((port + SYNC_MSGS + 8), (RAT_OP));
|
|
WRW_HARPOON((port + SYNC_MSGS + 10),
|
|
(MPM_OP + AMSG_OUT + DEFAULT_OFFSET));
|
|
WRW_HARPOON((port + SYNC_MSGS + 12), (BRH_OP + ALWAYS + NP));
|
|
|
|
if (syncFlag == 0) {
|
|
WR_HARPOON(port + hp_autostart_3,
|
|
(SELECT + SELCHK_STRT));
|
|
currTar_Info->TarStatus =
|
|
((currTar_Info->
|
|
TarStatus & ~(unsigned char)TAR_SYNC_MASK) |
|
|
(unsigned char)SYNC_TRYING);
|
|
} else {
|
|
WR_HARPOON(port + hp_autostart_3,
|
|
(AUTO_IMMED + CMD_ONLY_STRT));
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
else {
|
|
|
|
currTar_Info->TarStatus |= (unsigned char)SYNC_SUPPORTED;
|
|
currTar_Info->TarEEValue &= ~EE_SYNC_MASK;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_stsyncn
|
|
*
|
|
* Description: The has sent us a Sync Nego message so handle it as
|
|
* necessary.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FPT_stsyncn(u32 port, unsigned char p_card)
|
|
{
|
|
unsigned char sync_msg, offset, sync_reg, our_sync_msg;
|
|
struct sccb *currSCCB;
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
|
|
currSCCB = FPT_BL_Card[p_card].currentSCCB;
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID];
|
|
|
|
sync_msg = FPT_sfm(port, currSCCB);
|
|
|
|
if ((sync_msg == 0x00) && (currSCCB->Sccb_scsimsg == SMPARITY)) {
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
return;
|
|
}
|
|
|
|
ACCEPT_MSG(port);
|
|
|
|
offset = FPT_sfm(port, currSCCB);
|
|
|
|
if ((offset == 0x00) && (currSCCB->Sccb_scsimsg == SMPARITY)) {
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
return;
|
|
}
|
|
|
|
if ((currTar_Info->TarEEValue & EE_SYNC_MASK) == EE_SYNC_20MB)
|
|
|
|
our_sync_msg = 12; /* Setup our Message to 20mb/s */
|
|
|
|
else if ((currTar_Info->TarEEValue & EE_SYNC_MASK) == EE_SYNC_10MB)
|
|
|
|
our_sync_msg = 25; /* Setup our Message to 10mb/s */
|
|
|
|
else if ((currTar_Info->TarEEValue & EE_SYNC_MASK) == EE_SYNC_5MB)
|
|
|
|
our_sync_msg = 50; /* Setup our Message to 5mb/s */
|
|
else
|
|
|
|
our_sync_msg = 0; /* Message = Async */
|
|
|
|
if (sync_msg < our_sync_msg) {
|
|
sync_msg = our_sync_msg; /*if faster, then set to max. */
|
|
}
|
|
|
|
if (offset == ASYNC)
|
|
sync_msg = ASYNC;
|
|
|
|
if (offset > MAX_OFFSET)
|
|
offset = MAX_OFFSET;
|
|
|
|
sync_reg = 0x00;
|
|
|
|
if (sync_msg > 12)
|
|
|
|
sync_reg = 0x20; /* Use 10MB/s */
|
|
|
|
if (sync_msg > 25)
|
|
|
|
sync_reg = 0x40; /* Use 6.6MB/s */
|
|
|
|
if (sync_msg > 38)
|
|
|
|
sync_reg = 0x60; /* Use 5MB/s */
|
|
|
|
if (sync_msg > 50)
|
|
|
|
sync_reg = 0x80; /* Use 4MB/s */
|
|
|
|
if (sync_msg > 62)
|
|
|
|
sync_reg = 0xA0; /* Use 3.33MB/s */
|
|
|
|
if (sync_msg > 75)
|
|
|
|
sync_reg = 0xC0; /* Use 2.85MB/s */
|
|
|
|
if (sync_msg > 87)
|
|
|
|
sync_reg = 0xE0; /* Use 2.5MB/s */
|
|
|
|
if (sync_msg > 100) {
|
|
|
|
sync_reg = 0x00; /* Use ASYNC */
|
|
offset = 0x00;
|
|
}
|
|
|
|
if (currTar_Info->TarStatus & WIDE_ENABLED)
|
|
|
|
sync_reg |= offset;
|
|
|
|
else
|
|
|
|
sync_reg |= (offset | NARROW_SCSI);
|
|
|
|
FPT_sssyncv(port, currSCCB->TargID, sync_reg, currTar_Info);
|
|
|
|
if (currSCCB->Sccb_scsistat == SELECT_SN_ST) {
|
|
|
|
ACCEPT_MSG(port);
|
|
|
|
currTar_Info->TarStatus = ((currTar_Info->TarStatus &
|
|
~(unsigned char)TAR_SYNC_MASK) |
|
|
(unsigned char)SYNC_SUPPORTED);
|
|
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
}
|
|
|
|
else {
|
|
|
|
ACCEPT_MSG_ATN(port);
|
|
|
|
FPT_sisyncr(port, sync_msg, offset);
|
|
|
|
currTar_Info->TarStatus = ((currTar_Info->TarStatus &
|
|
~(unsigned char)TAR_SYNC_MASK) |
|
|
(unsigned char)SYNC_SUPPORTED);
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_sisyncr
|
|
*
|
|
* Description: Answer the targets sync message.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FPT_sisyncr(u32 port, unsigned char sync_pulse,
|
|
unsigned char offset)
|
|
{
|
|
ARAM_ACCESS(port);
|
|
WRW_HARPOON((port + SYNC_MSGS + 0), (MPM_OP + AMSG_OUT + SMEXT));
|
|
WRW_HARPOON((port + SYNC_MSGS + 2), (MPM_OP + AMSG_OUT + 0x03));
|
|
WRW_HARPOON((port + SYNC_MSGS + 4), (MPM_OP + AMSG_OUT + SMSYNC));
|
|
WRW_HARPOON((port + SYNC_MSGS + 6), (MPM_OP + AMSG_OUT + sync_pulse));
|
|
WRW_HARPOON((port + SYNC_MSGS + 8), (RAT_OP));
|
|
WRW_HARPOON((port + SYNC_MSGS + 10), (MPM_OP + AMSG_OUT + offset));
|
|
WRW_HARPOON((port + SYNC_MSGS + 12), (BRH_OP + ALWAYS + NP));
|
|
SGRAM_ACCESS(port);
|
|
|
|
WR_HARPOON(port + hp_portctrl_0, SCSI_PORT);
|
|
WRW_HARPOON((port + hp_intstat), CLR_ALL_INT_1);
|
|
|
|
WR_HARPOON(port + hp_autostart_3, (AUTO_IMMED + CMD_ONLY_STRT));
|
|
|
|
while (!(RDW_HARPOON((port + hp_intstat)) & (BUS_FREE | AUTO_INT))) {
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_siwidn
|
|
*
|
|
* Description: Read in a message byte from the SCSI bus, and check
|
|
* for a parity error.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static unsigned char FPT_siwidn(u32 port, unsigned char p_card)
|
|
{
|
|
struct sccb *currSCCB;
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
|
|
currSCCB = FPT_BL_Card[p_card].currentSCCB;
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID];
|
|
|
|
if (!((currTar_Info->TarStatus & TAR_WIDE_MASK) == WIDE_NEGOCIATED)) {
|
|
|
|
WRW_HARPOON((port + ID_MSG_STRT),
|
|
(MPM_OP + AMSG_OUT +
|
|
(currSCCB->
|
|
Sccb_idmsg & ~(unsigned char)DISC_PRIV)));
|
|
|
|
WRW_HARPOON((port + ID_MSG_STRT + 2), BRH_OP + ALWAYS + CMDPZ);
|
|
|
|
WRW_HARPOON((port + SYNC_MSGS + 0),
|
|
(MPM_OP + AMSG_OUT + SMEXT));
|
|
WRW_HARPOON((port + SYNC_MSGS + 2), (MPM_OP + AMSG_OUT + 0x02));
|
|
WRW_HARPOON((port + SYNC_MSGS + 4),
|
|
(MPM_OP + AMSG_OUT + SMWDTR));
|
|
WRW_HARPOON((port + SYNC_MSGS + 6), (RAT_OP));
|
|
WRW_HARPOON((port + SYNC_MSGS + 8),
|
|
(MPM_OP + AMSG_OUT + SM16BIT));
|
|
WRW_HARPOON((port + SYNC_MSGS + 10), (BRH_OP + ALWAYS + NP));
|
|
|
|
WR_HARPOON(port + hp_autostart_3, (SELECT + SELCHK_STRT));
|
|
|
|
currTar_Info->TarStatus = ((currTar_Info->TarStatus &
|
|
~(unsigned char)TAR_WIDE_MASK) |
|
|
(unsigned char)WIDE_ENABLED);
|
|
|
|
return 1;
|
|
}
|
|
|
|
else {
|
|
|
|
currTar_Info->TarStatus = ((currTar_Info->TarStatus &
|
|
~(unsigned char)TAR_WIDE_MASK) |
|
|
WIDE_NEGOCIATED);
|
|
|
|
currTar_Info->TarEEValue &= ~EE_WIDE_SCSI;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_stwidn
|
|
*
|
|
* Description: The has sent us a Wide Nego message so handle it as
|
|
* necessary.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FPT_stwidn(u32 port, unsigned char p_card)
|
|
{
|
|
unsigned char width;
|
|
struct sccb *currSCCB;
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
|
|
currSCCB = FPT_BL_Card[p_card].currentSCCB;
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID];
|
|
|
|
width = FPT_sfm(port, currSCCB);
|
|
|
|
if ((width == 0x00) && (currSCCB->Sccb_scsimsg == SMPARITY)) {
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
return;
|
|
}
|
|
|
|
if (!(currTar_Info->TarEEValue & EE_WIDE_SCSI))
|
|
width = 0;
|
|
|
|
if (width) {
|
|
currTar_Info->TarStatus |= WIDE_ENABLED;
|
|
width = 0;
|
|
} else {
|
|
width = NARROW_SCSI;
|
|
currTar_Info->TarStatus &= ~WIDE_ENABLED;
|
|
}
|
|
|
|
FPT_sssyncv(port, currSCCB->TargID, width, currTar_Info);
|
|
|
|
if (currSCCB->Sccb_scsistat == SELECT_WN_ST) {
|
|
|
|
currTar_Info->TarStatus |= WIDE_NEGOCIATED;
|
|
|
|
if (!
|
|
((currTar_Info->TarStatus & TAR_SYNC_MASK) ==
|
|
SYNC_SUPPORTED)) {
|
|
ACCEPT_MSG_ATN(port);
|
|
ARAM_ACCESS(port);
|
|
FPT_sisyncn(port, p_card, 1);
|
|
currSCCB->Sccb_scsistat = SELECT_SN_ST;
|
|
SGRAM_ACCESS(port);
|
|
} else {
|
|
ACCEPT_MSG(port);
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
}
|
|
}
|
|
|
|
else {
|
|
|
|
ACCEPT_MSG_ATN(port);
|
|
|
|
if (currTar_Info->TarEEValue & EE_WIDE_SCSI)
|
|
width = SM16BIT;
|
|
else
|
|
width = SM8BIT;
|
|
|
|
FPT_siwidr(port, width);
|
|
|
|
currTar_Info->TarStatus |= (WIDE_NEGOCIATED | WIDE_ENABLED);
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_siwidr
|
|
*
|
|
* Description: Answer the targets Wide nego message.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FPT_siwidr(u32 port, unsigned char width)
|
|
{
|
|
ARAM_ACCESS(port);
|
|
WRW_HARPOON((port + SYNC_MSGS + 0), (MPM_OP + AMSG_OUT + SMEXT));
|
|
WRW_HARPOON((port + SYNC_MSGS + 2), (MPM_OP + AMSG_OUT + 0x02));
|
|
WRW_HARPOON((port + SYNC_MSGS + 4), (MPM_OP + AMSG_OUT + SMWDTR));
|
|
WRW_HARPOON((port + SYNC_MSGS + 6), (RAT_OP));
|
|
WRW_HARPOON((port + SYNC_MSGS + 8), (MPM_OP + AMSG_OUT + width));
|
|
WRW_HARPOON((port + SYNC_MSGS + 10), (BRH_OP + ALWAYS + NP));
|
|
SGRAM_ACCESS(port);
|
|
|
|
WR_HARPOON(port + hp_portctrl_0, SCSI_PORT);
|
|
WRW_HARPOON((port + hp_intstat), CLR_ALL_INT_1);
|
|
|
|
WR_HARPOON(port + hp_autostart_3, (AUTO_IMMED + CMD_ONLY_STRT));
|
|
|
|
while (!(RDW_HARPOON((port + hp_intstat)) & (BUS_FREE | AUTO_INT))) {
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_sssyncv
|
|
*
|
|
* Description: Write the desired value to the Sync Register for the
|
|
* ID specified.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FPT_sssyncv(u32 p_port, unsigned char p_id,
|
|
unsigned char p_sync_value,
|
|
struct sccb_mgr_tar_info *currTar_Info)
|
|
{
|
|
unsigned char index;
|
|
|
|
index = p_id;
|
|
|
|
switch (index) {
|
|
|
|
case 0:
|
|
index = 12; /* hp_synctarg_0 */
|
|
break;
|
|
case 1:
|
|
index = 13; /* hp_synctarg_1 */
|
|
break;
|
|
case 2:
|
|
index = 14; /* hp_synctarg_2 */
|
|
break;
|
|
case 3:
|
|
index = 15; /* hp_synctarg_3 */
|
|
break;
|
|
case 4:
|
|
index = 8; /* hp_synctarg_4 */
|
|
break;
|
|
case 5:
|
|
index = 9; /* hp_synctarg_5 */
|
|
break;
|
|
case 6:
|
|
index = 10; /* hp_synctarg_6 */
|
|
break;
|
|
case 7:
|
|
index = 11; /* hp_synctarg_7 */
|
|
break;
|
|
case 8:
|
|
index = 4; /* hp_synctarg_8 */
|
|
break;
|
|
case 9:
|
|
index = 5; /* hp_synctarg_9 */
|
|
break;
|
|
case 10:
|
|
index = 6; /* hp_synctarg_10 */
|
|
break;
|
|
case 11:
|
|
index = 7; /* hp_synctarg_11 */
|
|
break;
|
|
case 12:
|
|
index = 0; /* hp_synctarg_12 */
|
|
break;
|
|
case 13:
|
|
index = 1; /* hp_synctarg_13 */
|
|
break;
|
|
case 14:
|
|
index = 2; /* hp_synctarg_14 */
|
|
break;
|
|
case 15:
|
|
index = 3; /* hp_synctarg_15 */
|
|
|
|
}
|
|
|
|
WR_HARPOON(p_port + hp_synctarg_base + index, p_sync_value);
|
|
|
|
currTar_Info->TarSyncCtrl = p_sync_value;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_sresb
|
|
*
|
|
* Description: Reset the desired card's SCSI bus.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FPT_sresb(u32 port, unsigned char p_card)
|
|
{
|
|
unsigned char scsiID, i;
|
|
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
|
|
WR_HARPOON(port + hp_page_ctrl,
|
|
(RD_HARPOON(port + hp_page_ctrl) | G_INT_DISABLE));
|
|
WRW_HARPOON((port + hp_intstat), CLR_ALL_INT);
|
|
|
|
WR_HARPOON(port + hp_scsictrl_0, SCSI_RST);
|
|
|
|
scsiID = RD_HARPOON(port + hp_seltimeout);
|
|
WR_HARPOON(port + hp_seltimeout, TO_5ms);
|
|
WRW_HARPOON((port + hp_intstat), TIMEOUT);
|
|
|
|
WR_HARPOON(port + hp_portctrl_0, (SCSI_PORT | START_TO));
|
|
|
|
while (!(RDW_HARPOON((port + hp_intstat)) & TIMEOUT)) {
|
|
}
|
|
|
|
WR_HARPOON(port + hp_seltimeout, scsiID);
|
|
|
|
WR_HARPOON(port + hp_scsictrl_0, ENA_SCAM_SEL);
|
|
|
|
FPT_Wait(port, TO_5ms);
|
|
|
|
WRW_HARPOON((port + hp_intstat), CLR_ALL_INT);
|
|
|
|
WR_HARPOON(port + hp_int_mask, (RD_HARPOON(port + hp_int_mask) | 0x00));
|
|
|
|
for (scsiID = 0; scsiID < MAX_SCSI_TAR; scsiID++) {
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][scsiID];
|
|
|
|
if (currTar_Info->TarEEValue & EE_SYNC_MASK) {
|
|
currTar_Info->TarSyncCtrl = 0;
|
|
currTar_Info->TarStatus &= ~TAR_SYNC_MASK;
|
|
}
|
|
|
|
if (currTar_Info->TarEEValue & EE_WIDE_SCSI) {
|
|
currTar_Info->TarStatus &= ~TAR_WIDE_MASK;
|
|
}
|
|
|
|
FPT_sssyncv(port, scsiID, NARROW_SCSI, currTar_Info);
|
|
|
|
FPT_SccbMgrTableInitTarget(p_card, scsiID);
|
|
}
|
|
|
|
FPT_BL_Card[p_card].scanIndex = 0x00;
|
|
FPT_BL_Card[p_card].currentSCCB = NULL;
|
|
FPT_BL_Card[p_card].globalFlags &= ~(F_TAG_STARTED | F_HOST_XFER_ACT
|
|
| F_NEW_SCCB_CMD);
|
|
FPT_BL_Card[p_card].cmdCounter = 0x00;
|
|
FPT_BL_Card[p_card].discQCount = 0x00;
|
|
FPT_BL_Card[p_card].tagQ_Lst = 0x01;
|
|
|
|
for (i = 0; i < QUEUE_DEPTH; i++)
|
|
FPT_BL_Card[p_card].discQ_Tbl[i] = NULL;
|
|
|
|
WR_HARPOON(port + hp_page_ctrl,
|
|
(RD_HARPOON(port + hp_page_ctrl) & ~G_INT_DISABLE));
|
|
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_ssenss
|
|
*
|
|
* Description: Setup for the Auto Sense command.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FPT_ssenss(struct sccb_card *pCurrCard)
|
|
{
|
|
unsigned char i;
|
|
struct sccb *currSCCB;
|
|
|
|
currSCCB = pCurrCard->currentSCCB;
|
|
|
|
currSCCB->Save_CdbLen = currSCCB->CdbLength;
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
|
|
currSCCB->Save_Cdb[i] = currSCCB->Cdb[i];
|
|
}
|
|
|
|
currSCCB->CdbLength = SIX_BYTE_CMD;
|
|
currSCCB->Cdb[0] = SCSI_REQUEST_SENSE;
|
|
currSCCB->Cdb[1] = currSCCB->Cdb[1] & (unsigned char)0xE0; /*Keep LUN. */
|
|
currSCCB->Cdb[2] = 0x00;
|
|
currSCCB->Cdb[3] = 0x00;
|
|
currSCCB->Cdb[4] = currSCCB->RequestSenseLength;
|
|
currSCCB->Cdb[5] = 0x00;
|
|
|
|
currSCCB->Sccb_XferCnt = (u32)currSCCB->RequestSenseLength;
|
|
|
|
currSCCB->Sccb_ATC = 0x00;
|
|
|
|
currSCCB->Sccb_XferState |= F_AUTO_SENSE;
|
|
|
|
currSCCB->Sccb_XferState &= ~F_SG_XFER;
|
|
|
|
currSCCB->Sccb_idmsg = currSCCB->Sccb_idmsg & ~(unsigned char)DISC_PRIV;
|
|
|
|
currSCCB->ControlByte = 0x00;
|
|
|
|
currSCCB->Sccb_MGRFlags &= F_STATUSLOADED;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_sxfrp
|
|
*
|
|
* Description: Transfer data into the bit bucket until the device
|
|
* decides to switch phase.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_sxfrp(u32 p_port, unsigned char p_card)
|
|
{
|
|
unsigned char curr_phz;
|
|
|
|
DISABLE_AUTO(p_port);
|
|
|
|
if (FPT_BL_Card[p_card].globalFlags & F_HOST_XFER_ACT) {
|
|
|
|
FPT_hostDataXferAbort(p_port, p_card,
|
|
FPT_BL_Card[p_card].currentSCCB);
|
|
|
|
}
|
|
|
|
/* If the Automation handled the end of the transfer then do not
|
|
match the phase or we will get out of sync with the ISR. */
|
|
|
|
if (RDW_HARPOON((p_port + hp_intstat)) &
|
|
(BUS_FREE | XFER_CNT_0 | AUTO_INT))
|
|
return;
|
|
|
|
WR_HARPOON(p_port + hp_xfercnt_0, 0x00);
|
|
|
|
curr_phz = RD_HARPOON(p_port + hp_scsisig) & (unsigned char)S_SCSI_PHZ;
|
|
|
|
WRW_HARPOON((p_port + hp_intstat), XFER_CNT_0);
|
|
|
|
WR_HARPOON(p_port + hp_scsisig, curr_phz);
|
|
|
|
while (!(RDW_HARPOON((p_port + hp_intstat)) & (BUS_FREE | RESET)) &&
|
|
(curr_phz ==
|
|
(RD_HARPOON(p_port + hp_scsisig) & (unsigned char)S_SCSI_PHZ)))
|
|
{
|
|
if (curr_phz & (unsigned char)SCSI_IOBIT) {
|
|
WR_HARPOON(p_port + hp_portctrl_0,
|
|
(SCSI_PORT | HOST_PORT | SCSI_INBIT));
|
|
|
|
if (!(RD_HARPOON(p_port + hp_xferstat) & FIFO_EMPTY)) {
|
|
RD_HARPOON(p_port + hp_fifodata_0);
|
|
}
|
|
} else {
|
|
WR_HARPOON(p_port + hp_portctrl_0,
|
|
(SCSI_PORT | HOST_PORT | HOST_WRT));
|
|
if (RD_HARPOON(p_port + hp_xferstat) & FIFO_EMPTY) {
|
|
WR_HARPOON(p_port + hp_fifodata_0, 0xFA);
|
|
}
|
|
}
|
|
} /* End of While loop for padding data I/O phase */
|
|
|
|
while (!(RDW_HARPOON((p_port + hp_intstat)) & (BUS_FREE | RESET))) {
|
|
if (RD_HARPOON(p_port + hp_scsisig) & SCSI_REQ)
|
|
break;
|
|
}
|
|
|
|
WR_HARPOON(p_port + hp_portctrl_0,
|
|
(SCSI_PORT | HOST_PORT | SCSI_INBIT));
|
|
while (!(RD_HARPOON(p_port + hp_xferstat) & FIFO_EMPTY)) {
|
|
RD_HARPOON(p_port + hp_fifodata_0);
|
|
}
|
|
|
|
if (!(RDW_HARPOON((p_port + hp_intstat)) & (BUS_FREE | RESET))) {
|
|
WR_HARPOON(p_port + hp_autostart_0,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
while (!(RDW_HARPOON((p_port + hp_intstat)) & AUTO_INT)) {
|
|
}
|
|
|
|
if (RDW_HARPOON((p_port + hp_intstat)) &
|
|
(ICMD_COMP | ITAR_DISC))
|
|
while (!
|
|
(RDW_HARPOON((p_port + hp_intstat)) &
|
|
(BUS_FREE | RSEL))) ;
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_schkdd
|
|
*
|
|
* Description: Make sure data has been flushed from both FIFOs and abort
|
|
* the operations if necessary.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_schkdd(u32 port, unsigned char p_card)
|
|
{
|
|
unsigned short TimeOutLoop;
|
|
unsigned char sPhase;
|
|
|
|
struct sccb *currSCCB;
|
|
|
|
currSCCB = FPT_BL_Card[p_card].currentSCCB;
|
|
|
|
if ((currSCCB->Sccb_scsistat != DATA_OUT_ST) &&
|
|
(currSCCB->Sccb_scsistat != DATA_IN_ST)) {
|
|
return;
|
|
}
|
|
|
|
if (currSCCB->Sccb_XferState & F_ODD_BALL_CNT) {
|
|
|
|
currSCCB->Sccb_ATC += (currSCCB->Sccb_XferCnt - 1);
|
|
|
|
currSCCB->Sccb_XferCnt = 1;
|
|
|
|
currSCCB->Sccb_XferState &= ~F_ODD_BALL_CNT;
|
|
WRW_HARPOON((port + hp_fiforead), (unsigned short)0x00);
|
|
WR_HARPOON(port + hp_xferstat, 0x00);
|
|
}
|
|
|
|
else {
|
|
|
|
currSCCB->Sccb_ATC += currSCCB->Sccb_XferCnt;
|
|
|
|
currSCCB->Sccb_XferCnt = 0;
|
|
}
|
|
|
|
if ((RDW_HARPOON((port + hp_intstat)) & PARITY) &&
|
|
(currSCCB->HostStatus == SCCB_COMPLETE)) {
|
|
|
|
currSCCB->HostStatus = SCCB_PARITY_ERR;
|
|
WRW_HARPOON((port + hp_intstat), PARITY);
|
|
}
|
|
|
|
FPT_hostDataXferAbort(port, p_card, currSCCB);
|
|
|
|
while (RD_HARPOON(port + hp_scsisig) & SCSI_ACK) {
|
|
}
|
|
|
|
TimeOutLoop = 0;
|
|
|
|
while (RD_HARPOON(port + hp_xferstat) & FIFO_EMPTY) {
|
|
if (RDW_HARPOON((port + hp_intstat)) & BUS_FREE) {
|
|
return;
|
|
}
|
|
if (RD_HARPOON(port + hp_offsetctr) & (unsigned char)0x1F) {
|
|
break;
|
|
}
|
|
if (RDW_HARPOON((port + hp_intstat)) & RESET) {
|
|
return;
|
|
}
|
|
if ((RD_HARPOON(port + hp_scsisig) & SCSI_REQ)
|
|
|| (TimeOutLoop++ > 0x3000))
|
|
break;
|
|
}
|
|
|
|
sPhase = RD_HARPOON(port + hp_scsisig) & (SCSI_BSY | S_SCSI_PHZ);
|
|
if ((!(RD_HARPOON(port + hp_xferstat) & FIFO_EMPTY)) ||
|
|
(RD_HARPOON(port + hp_offsetctr) & (unsigned char)0x1F) ||
|
|
(sPhase == (SCSI_BSY | S_DATAO_PH)) ||
|
|
(sPhase == (SCSI_BSY | S_DATAI_PH))) {
|
|
|
|
WR_HARPOON(port + hp_portctrl_0, SCSI_PORT);
|
|
|
|
if (!(currSCCB->Sccb_XferState & F_ALL_XFERRED)) {
|
|
if (currSCCB->Sccb_XferState & F_HOST_XFER_DIR) {
|
|
FPT_phaseDataIn(port, p_card);
|
|
}
|
|
|
|
else {
|
|
FPT_phaseDataOut(port, p_card);
|
|
}
|
|
} else {
|
|
FPT_sxfrp(port, p_card);
|
|
if (!(RDW_HARPOON((port + hp_intstat)) &
|
|
(BUS_FREE | ICMD_COMP | ITAR_DISC | RESET))) {
|
|
WRW_HARPOON((port + hp_intstat), AUTO_INT);
|
|
FPT_phaseDecode(port, p_card);
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
else {
|
|
WR_HARPOON(port + hp_portctrl_0, 0x00);
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_sinits
|
|
*
|
|
* Description: Setup SCCB manager fields in this SCCB.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_sinits(struct sccb *p_sccb, unsigned char p_card)
|
|
{
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
|
|
if ((p_sccb->TargID >= MAX_SCSI_TAR) || (p_sccb->Lun >= MAX_LUN)) {
|
|
return;
|
|
}
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][p_sccb->TargID];
|
|
|
|
p_sccb->Sccb_XferState = 0x00;
|
|
p_sccb->Sccb_XferCnt = p_sccb->DataLength;
|
|
|
|
if ((p_sccb->OperationCode == SCATTER_GATHER_COMMAND) ||
|
|
(p_sccb->OperationCode == RESIDUAL_SG_COMMAND)) {
|
|
|
|
p_sccb->Sccb_SGoffset = 0;
|
|
p_sccb->Sccb_XferState = F_SG_XFER;
|
|
p_sccb->Sccb_XferCnt = 0x00;
|
|
}
|
|
|
|
if (p_sccb->DataLength == 0x00)
|
|
|
|
p_sccb->Sccb_XferState |= F_ALL_XFERRED;
|
|
|
|
if (p_sccb->ControlByte & F_USE_CMD_Q) {
|
|
if ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) == TAG_Q_REJECT)
|
|
p_sccb->ControlByte &= ~F_USE_CMD_Q;
|
|
|
|
else
|
|
currTar_Info->TarStatus |= TAG_Q_TRYING;
|
|
}
|
|
|
|
/* For !single SCSI device in system & device allow Disconnect
|
|
or command is tag_q type then send Cmd with Disconnect Enable
|
|
else send Cmd with Disconnect Disable */
|
|
|
|
/*
|
|
if (((!(FPT_BL_Card[p_card].globalFlags & F_SINGLE_DEVICE)) &&
|
|
(currTar_Info->TarStatus & TAR_ALLOW_DISC)) ||
|
|
(currTar_Info->TarStatus & TAG_Q_TRYING)) {
|
|
*/
|
|
if ((currTar_Info->TarStatus & TAR_ALLOW_DISC) ||
|
|
(currTar_Info->TarStatus & TAG_Q_TRYING)) {
|
|
p_sccb->Sccb_idmsg =
|
|
(unsigned char)(SMIDENT | DISC_PRIV) | p_sccb->Lun;
|
|
}
|
|
|
|
else {
|
|
|
|
p_sccb->Sccb_idmsg = (unsigned char)SMIDENT | p_sccb->Lun;
|
|
}
|
|
|
|
p_sccb->HostStatus = 0x00;
|
|
p_sccb->TargetStatus = 0x00;
|
|
p_sccb->Sccb_tag = 0x00;
|
|
p_sccb->Sccb_MGRFlags = 0x00;
|
|
p_sccb->Sccb_sgseg = 0x00;
|
|
p_sccb->Sccb_ATC = 0x00;
|
|
p_sccb->Sccb_savedATC = 0x00;
|
|
/*
|
|
p_sccb->SccbVirtDataPtr = 0x00;
|
|
p_sccb->Sccb_forwardlink = NULL;
|
|
p_sccb->Sccb_backlink = NULL;
|
|
*/
|
|
p_sccb->Sccb_scsistat = BUS_FREE_ST;
|
|
p_sccb->SccbStatus = SCCB_IN_PROCESS;
|
|
p_sccb->Sccb_scsimsg = SMNO_OP;
|
|
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Phase Decode
|
|
*
|
|
* Description: Determine the phase and call the appropriate function.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_phaseDecode(u32 p_port, unsigned char p_card)
|
|
{
|
|
unsigned char phase_ref;
|
|
void (*phase) (u32, unsigned char);
|
|
|
|
DISABLE_AUTO(p_port);
|
|
|
|
phase_ref =
|
|
(unsigned char)(RD_HARPOON(p_port + hp_scsisig) & S_SCSI_PHZ);
|
|
|
|
phase = FPT_s_PhaseTbl[phase_ref];
|
|
|
|
(*phase) (p_port, p_card); /* Call the correct phase func */
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Data Out Phase
|
|
*
|
|
* Description: Start up both the BusMaster and Xbow.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_phaseDataOut(u32 port, unsigned char p_card)
|
|
{
|
|
|
|
struct sccb *currSCCB;
|
|
|
|
currSCCB = FPT_BL_Card[p_card].currentSCCB;
|
|
if (currSCCB == NULL) {
|
|
return; /* Exit if No SCCB record */
|
|
}
|
|
|
|
currSCCB->Sccb_scsistat = DATA_OUT_ST;
|
|
currSCCB->Sccb_XferState &= ~(F_HOST_XFER_DIR | F_NO_DATA_YET);
|
|
|
|
WR_HARPOON(port + hp_portctrl_0, SCSI_PORT);
|
|
|
|
WRW_HARPOON((port + hp_intstat), XFER_CNT_0);
|
|
|
|
WR_HARPOON(port + hp_autostart_0, (END_DATA + END_DATA_START));
|
|
|
|
FPT_dataXferProcessor(port, &FPT_BL_Card[p_card]);
|
|
|
|
if (currSCCB->Sccb_XferCnt == 0) {
|
|
|
|
if ((currSCCB->ControlByte & SCCB_DATA_XFER_OUT) &&
|
|
(currSCCB->HostStatus == SCCB_COMPLETE))
|
|
currSCCB->HostStatus = SCCB_DATA_OVER_RUN;
|
|
|
|
FPT_sxfrp(port, p_card);
|
|
if (!(RDW_HARPOON((port + hp_intstat)) & (BUS_FREE | RESET)))
|
|
FPT_phaseDecode(port, p_card);
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Data In Phase
|
|
*
|
|
* Description: Startup the BusMaster and the XBOW.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_phaseDataIn(u32 port, unsigned char p_card)
|
|
{
|
|
|
|
struct sccb *currSCCB;
|
|
|
|
currSCCB = FPT_BL_Card[p_card].currentSCCB;
|
|
|
|
if (currSCCB == NULL) {
|
|
return; /* Exit if No SCCB record */
|
|
}
|
|
|
|
currSCCB->Sccb_scsistat = DATA_IN_ST;
|
|
currSCCB->Sccb_XferState |= F_HOST_XFER_DIR;
|
|
currSCCB->Sccb_XferState &= ~F_NO_DATA_YET;
|
|
|
|
WR_HARPOON(port + hp_portctrl_0, SCSI_PORT);
|
|
|
|
WRW_HARPOON((port + hp_intstat), XFER_CNT_0);
|
|
|
|
WR_HARPOON(port + hp_autostart_0, (END_DATA + END_DATA_START));
|
|
|
|
FPT_dataXferProcessor(port, &FPT_BL_Card[p_card]);
|
|
|
|
if (currSCCB->Sccb_XferCnt == 0) {
|
|
|
|
if ((currSCCB->ControlByte & SCCB_DATA_XFER_IN) &&
|
|
(currSCCB->HostStatus == SCCB_COMPLETE))
|
|
currSCCB->HostStatus = SCCB_DATA_OVER_RUN;
|
|
|
|
FPT_sxfrp(port, p_card);
|
|
if (!(RDW_HARPOON((port + hp_intstat)) & (BUS_FREE | RESET)))
|
|
FPT_phaseDecode(port, p_card);
|
|
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Command Phase
|
|
*
|
|
* Description: Load the CDB into the automation and start it up.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_phaseCommand(u32 p_port, unsigned char p_card)
|
|
{
|
|
struct sccb *currSCCB;
|
|
u32 cdb_reg;
|
|
unsigned char i;
|
|
|
|
currSCCB = FPT_BL_Card[p_card].currentSCCB;
|
|
|
|
if (currSCCB->OperationCode == RESET_COMMAND) {
|
|
|
|
currSCCB->HostStatus = SCCB_PHASE_SEQUENCE_FAIL;
|
|
currSCCB->CdbLength = SIX_BYTE_CMD;
|
|
}
|
|
|
|
WR_HARPOON(p_port + hp_scsisig, 0x00);
|
|
|
|
ARAM_ACCESS(p_port);
|
|
|
|
cdb_reg = p_port + CMD_STRT;
|
|
|
|
for (i = 0; i < currSCCB->CdbLength; i++) {
|
|
|
|
if (currSCCB->OperationCode == RESET_COMMAND)
|
|
|
|
WRW_HARPOON(cdb_reg, (MPM_OP + ACOMMAND + 0x00));
|
|
|
|
else
|
|
WRW_HARPOON(cdb_reg,
|
|
(MPM_OP + ACOMMAND + currSCCB->Cdb[i]));
|
|
cdb_reg += 2;
|
|
}
|
|
|
|
if (currSCCB->CdbLength != TWELVE_BYTE_CMD)
|
|
WRW_HARPOON(cdb_reg, (BRH_OP + ALWAYS + NP));
|
|
|
|
WR_HARPOON(p_port + hp_portctrl_0, (SCSI_PORT));
|
|
|
|
currSCCB->Sccb_scsistat = COMMAND_ST;
|
|
|
|
WR_HARPOON(p_port + hp_autostart_3, (AUTO_IMMED | CMD_ONLY_STRT));
|
|
SGRAM_ACCESS(p_port);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Status phase
|
|
*
|
|
* Description: Bring in the status and command complete message bytes
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_phaseStatus(u32 port, unsigned char p_card)
|
|
{
|
|
/* Start-up the automation to finish off this command and let the
|
|
isr handle the interrupt for command complete when it comes in.
|
|
We could wait here for the interrupt to be generated?
|
|
*/
|
|
|
|
WR_HARPOON(port + hp_scsisig, 0x00);
|
|
|
|
WR_HARPOON(port + hp_autostart_0, (AUTO_IMMED + END_DATA_START));
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Phase Message Out
|
|
*
|
|
* Description: Send out our message (if we have one) and handle whatever
|
|
* else is involed.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_phaseMsgOut(u32 port, unsigned char p_card)
|
|
{
|
|
unsigned char message, scsiID;
|
|
struct sccb *currSCCB;
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
|
|
currSCCB = FPT_BL_Card[p_card].currentSCCB;
|
|
|
|
if (currSCCB != NULL) {
|
|
|
|
message = currSCCB->Sccb_scsimsg;
|
|
scsiID = currSCCB->TargID;
|
|
|
|
if (message == SMDEV_RESET) {
|
|
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][scsiID];
|
|
currTar_Info->TarSyncCtrl = 0;
|
|
FPT_sssyncv(port, scsiID, NARROW_SCSI, currTar_Info);
|
|
|
|
if (FPT_sccbMgrTbl[p_card][scsiID].
|
|
TarEEValue & EE_SYNC_MASK) {
|
|
|
|
FPT_sccbMgrTbl[p_card][scsiID].TarStatus &=
|
|
~TAR_SYNC_MASK;
|
|
|
|
}
|
|
|
|
if (FPT_sccbMgrTbl[p_card][scsiID].
|
|
TarEEValue & EE_WIDE_SCSI) {
|
|
|
|
FPT_sccbMgrTbl[p_card][scsiID].TarStatus &=
|
|
~TAR_WIDE_MASK;
|
|
}
|
|
|
|
FPT_queueFlushSccb(p_card, SCCB_COMPLETE);
|
|
FPT_SccbMgrTableInitTarget(p_card, scsiID);
|
|
} else if (currSCCB->Sccb_scsistat == ABORT_ST) {
|
|
currSCCB->HostStatus = SCCB_COMPLETE;
|
|
if (FPT_BL_Card[p_card].discQ_Tbl[currSCCB->Sccb_tag] !=
|
|
NULL) {
|
|
FPT_BL_Card[p_card].discQ_Tbl[currSCCB->
|
|
Sccb_tag] = NULL;
|
|
FPT_sccbMgrTbl[p_card][scsiID].TarTagQ_Cnt--;
|
|
}
|
|
|
|
}
|
|
|
|
else if (currSCCB->Sccb_scsistat < COMMAND_ST) {
|
|
|
|
if (message == SMNO_OP) {
|
|
currSCCB->Sccb_MGRFlags |= F_DEV_SELECTED;
|
|
|
|
FPT_ssel(port, p_card);
|
|
return;
|
|
}
|
|
} else {
|
|
|
|
if (message == SMABORT)
|
|
|
|
FPT_queueFlushSccb(p_card, SCCB_COMPLETE);
|
|
}
|
|
|
|
} else {
|
|
message = SMABORT;
|
|
}
|
|
|
|
WRW_HARPOON((port + hp_intstat), (BUS_FREE | PHASE | XFER_CNT_0));
|
|
|
|
WR_HARPOON(port + hp_portctrl_0, SCSI_BUS_EN);
|
|
|
|
WR_HARPOON(port + hp_scsidata_0, message);
|
|
|
|
WR_HARPOON(port + hp_scsisig, (SCSI_ACK + S_ILL_PH));
|
|
|
|
ACCEPT_MSG(port);
|
|
|
|
WR_HARPOON(port + hp_portctrl_0, 0x00);
|
|
|
|
if ((message == SMABORT) || (message == SMDEV_RESET) ||
|
|
(message == SMABORT_TAG)) {
|
|
|
|
while (!(RDW_HARPOON((port + hp_intstat)) & (BUS_FREE | PHASE))) {
|
|
}
|
|
|
|
if (RDW_HARPOON((port + hp_intstat)) & BUS_FREE) {
|
|
WRW_HARPOON((port + hp_intstat), BUS_FREE);
|
|
|
|
if (currSCCB != NULL) {
|
|
|
|
if ((FPT_BL_Card[p_card].
|
|
globalFlags & F_CONLUN_IO)
|
|
&&
|
|
((FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarStatus & TAR_TAG_Q_MASK) !=
|
|
TAG_Q_TRYING))
|
|
FPT_sccbMgrTbl[p_card][currSCCB->
|
|
TargID].
|
|
TarLUNBusy[currSCCB->Lun] = 0;
|
|
else
|
|
FPT_sccbMgrTbl[p_card][currSCCB->
|
|
TargID].
|
|
TarLUNBusy[0] = 0;
|
|
|
|
FPT_queueCmdComplete(&FPT_BL_Card[p_card],
|
|
currSCCB, p_card);
|
|
}
|
|
|
|
else {
|
|
FPT_BL_Card[p_card].globalFlags |=
|
|
F_NEW_SCCB_CMD;
|
|
}
|
|
}
|
|
|
|
else {
|
|
|
|
FPT_sxfrp(port, p_card);
|
|
}
|
|
}
|
|
|
|
else {
|
|
|
|
if (message == SMPARITY) {
|
|
currSCCB->Sccb_scsimsg = SMNO_OP;
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
} else {
|
|
FPT_sxfrp(port, p_card);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Message In phase
|
|
*
|
|
* Description: Bring in the message and determine what to do with it.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_phaseMsgIn(u32 port, unsigned char p_card)
|
|
{
|
|
unsigned char message;
|
|
struct sccb *currSCCB;
|
|
|
|
currSCCB = FPT_BL_Card[p_card].currentSCCB;
|
|
|
|
if (FPT_BL_Card[p_card].globalFlags & F_HOST_XFER_ACT) {
|
|
|
|
FPT_phaseChkFifo(port, p_card);
|
|
}
|
|
|
|
message = RD_HARPOON(port + hp_scsidata_0);
|
|
if ((message == SMDISC) || (message == SMSAVE_DATA_PTR)) {
|
|
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + END_DATA_START));
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
message = FPT_sfm(port, currSCCB);
|
|
if (message) {
|
|
|
|
FPT_sdecm(message, port, p_card);
|
|
|
|
} else {
|
|
if (currSCCB->Sccb_scsimsg != SMPARITY)
|
|
ACCEPT_MSG(port);
|
|
WR_HARPOON(port + hp_autostart_1,
|
|
(AUTO_IMMED + DISCONNECT_START));
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Illegal phase
|
|
*
|
|
* Description: Target switched to some illegal phase, so all we can do
|
|
* is report an error back to the host (if that is possible)
|
|
* and send an ABORT message to the misbehaving target.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_phaseIllegal(u32 port, unsigned char p_card)
|
|
{
|
|
struct sccb *currSCCB;
|
|
|
|
currSCCB = FPT_BL_Card[p_card].currentSCCB;
|
|
|
|
WR_HARPOON(port + hp_scsisig, RD_HARPOON(port + hp_scsisig));
|
|
if (currSCCB != NULL) {
|
|
|
|
currSCCB->HostStatus = SCCB_PHASE_SEQUENCE_FAIL;
|
|
currSCCB->Sccb_scsistat = ABORT_ST;
|
|
currSCCB->Sccb_scsimsg = SMABORT;
|
|
}
|
|
|
|
ACCEPT_MSG_ATN(port);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Phase Check FIFO
|
|
*
|
|
* Description: Make sure data has been flushed from both FIFOs and abort
|
|
* the operations if necessary.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_phaseChkFifo(u32 port, unsigned char p_card)
|
|
{
|
|
u32 xfercnt;
|
|
struct sccb *currSCCB;
|
|
|
|
currSCCB = FPT_BL_Card[p_card].currentSCCB;
|
|
|
|
if (currSCCB->Sccb_scsistat == DATA_IN_ST) {
|
|
|
|
while ((!(RD_HARPOON(port + hp_xferstat) & FIFO_EMPTY)) &&
|
|
(RD_HARPOON(port + hp_ext_status) & BM_CMD_BUSY)) {
|
|
}
|
|
|
|
if (!(RD_HARPOON(port + hp_xferstat) & FIFO_EMPTY)) {
|
|
currSCCB->Sccb_ATC += currSCCB->Sccb_XferCnt;
|
|
|
|
currSCCB->Sccb_XferCnt = 0;
|
|
|
|
if ((RDW_HARPOON((port + hp_intstat)) & PARITY) &&
|
|
(currSCCB->HostStatus == SCCB_COMPLETE)) {
|
|
currSCCB->HostStatus = SCCB_PARITY_ERR;
|
|
WRW_HARPOON((port + hp_intstat), PARITY);
|
|
}
|
|
|
|
FPT_hostDataXferAbort(port, p_card, currSCCB);
|
|
|
|
FPT_dataXferProcessor(port, &FPT_BL_Card[p_card]);
|
|
|
|
while ((!(RD_HARPOON(port + hp_xferstat) & FIFO_EMPTY))
|
|
&& (RD_HARPOON(port + hp_ext_status) &
|
|
BM_CMD_BUSY)) {
|
|
}
|
|
|
|
}
|
|
}
|
|
|
|
/*End Data In specific code. */
|
|
GET_XFER_CNT(port, xfercnt);
|
|
|
|
WR_HARPOON(port + hp_xfercnt_0, 0x00);
|
|
|
|
WR_HARPOON(port + hp_portctrl_0, 0x00);
|
|
|
|
currSCCB->Sccb_ATC += (currSCCB->Sccb_XferCnt - xfercnt);
|
|
|
|
currSCCB->Sccb_XferCnt = xfercnt;
|
|
|
|
if ((RDW_HARPOON((port + hp_intstat)) & PARITY) &&
|
|
(currSCCB->HostStatus == SCCB_COMPLETE)) {
|
|
|
|
currSCCB->HostStatus = SCCB_PARITY_ERR;
|
|
WRW_HARPOON((port + hp_intstat), PARITY);
|
|
}
|
|
|
|
FPT_hostDataXferAbort(port, p_card, currSCCB);
|
|
|
|
WR_HARPOON(port + hp_fifowrite, 0x00);
|
|
WR_HARPOON(port + hp_fiforead, 0x00);
|
|
WR_HARPOON(port + hp_xferstat, 0x00);
|
|
|
|
WRW_HARPOON((port + hp_intstat), XFER_CNT_0);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Phase Bus Free
|
|
*
|
|
* Description: We just went bus free so figure out if it was
|
|
* because of command complete or from a disconnect.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FPT_phaseBusFree(u32 port, unsigned char p_card)
|
|
{
|
|
struct sccb *currSCCB;
|
|
|
|
currSCCB = FPT_BL_Card[p_card].currentSCCB;
|
|
|
|
if (currSCCB != NULL) {
|
|
|
|
DISABLE_AUTO(port);
|
|
|
|
if (currSCCB->OperationCode == RESET_COMMAND) {
|
|
|
|
if ((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
|
|
((FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarLUNBusy[currSCCB->Lun] = 0;
|
|
else
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarLUNBusy[0] = 0;
|
|
|
|
FPT_queueCmdComplete(&FPT_BL_Card[p_card], currSCCB,
|
|
p_card);
|
|
|
|
FPT_queueSearchSelect(&FPT_BL_Card[p_card], p_card);
|
|
|
|
}
|
|
|
|
else if (currSCCB->Sccb_scsistat == SELECT_SN_ST) {
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus |=
|
|
(unsigned char)SYNC_SUPPORTED;
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarEEValue &=
|
|
~EE_SYNC_MASK;
|
|
}
|
|
|
|
else if (currSCCB->Sccb_scsistat == SELECT_WN_ST) {
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus =
|
|
(FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarStatus & ~WIDE_ENABLED) | WIDE_NEGOCIATED;
|
|
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarEEValue &=
|
|
~EE_WIDE_SCSI;
|
|
}
|
|
|
|
else if (currSCCB->Sccb_scsistat == SELECT_Q_ST) {
|
|
/* Make sure this is not a phony BUS_FREE. If we were
|
|
reselected or if BUSY is NOT on then this is a
|
|
valid BUS FREE. SRR Wednesday, 5/10/1995. */
|
|
|
|
if ((!(RD_HARPOON(port + hp_scsisig) & SCSI_BSY)) ||
|
|
(RDW_HARPOON((port + hp_intstat)) & RSEL)) {
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarStatus &= ~TAR_TAG_Q_MASK;
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarStatus |= TAG_Q_REJECT;
|
|
}
|
|
|
|
else {
|
|
return;
|
|
}
|
|
}
|
|
|
|
else {
|
|
|
|
currSCCB->Sccb_scsistat = BUS_FREE_ST;
|
|
|
|
if (!currSCCB->HostStatus) {
|
|
currSCCB->HostStatus = SCCB_PHASE_SEQUENCE_FAIL;
|
|
}
|
|
|
|
if ((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
|
|
((FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarLUNBusy[currSCCB->Lun] = 0;
|
|
else
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarLUNBusy[0] = 0;
|
|
|
|
FPT_queueCmdComplete(&FPT_BL_Card[p_card], currSCCB,
|
|
p_card);
|
|
return;
|
|
}
|
|
|
|
FPT_BL_Card[p_card].globalFlags |= F_NEW_SCCB_CMD;
|
|
|
|
} /*end if !=null */
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Auto Load Default Map
|
|
*
|
|
* Description: Load the Automation RAM with the defualt map values.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FPT_autoLoadDefaultMap(u32 p_port)
|
|
{
|
|
u32 map_addr;
|
|
|
|
ARAM_ACCESS(p_port);
|
|
map_addr = p_port + hp_aramBase;
|
|
|
|
WRW_HARPOON(map_addr, (MPM_OP + AMSG_OUT + 0xC0)); /*ID MESSAGE */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MPM_OP + AMSG_OUT + 0x20)); /*SIMPLE TAG QUEUEING MSG */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, RAT_OP); /*RESET ATTENTION */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MPM_OP + AMSG_OUT + 0x00)); /*TAG ID MSG */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 0 */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 1 */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 2 */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 3 */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 4 */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 5 */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 6 */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 7 */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 8 */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 9 */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 10 */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MPM_OP + ACOMMAND + 0x00)); /*CDB BYTE 11 */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (CPE_OP + ADATA_OUT + DINT)); /*JUMP IF DATA OUT */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (TCB_OP + FIFO_0 + DI)); /*JUMP IF NO DATA IN FIFO */
|
|
map_addr += 2; /*This means AYNC DATA IN */
|
|
WRW_HARPOON(map_addr, (SSI_OP + SSI_IDO_STRT)); /*STOP AND INTERRUPT */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (CPE_OP + ADATA_IN + DINT)); /*JUMP IF NOT DATA IN PHZ */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (CPN_OP + AMSG_IN + ST)); /*IF NOT MSG IN CHECK 4 DATA IN */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (CRD_OP + SDATA + 0x02)); /*SAVE DATA PTR MSG? */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (BRH_OP + NOT_EQ + DC)); /*GO CHECK FOR DISCONNECT MSG */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MRR_OP + SDATA + D_AR1)); /*SAVE DATA PTRS MSG */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (CPN_OP + AMSG_IN + ST)); /*IF NOT MSG IN CHECK DATA IN */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (CRD_OP + SDATA + 0x04)); /*DISCONNECT MSG? */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (BRH_OP + NOT_EQ + UNKNWN)); /*UKNKNOWN MSG */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MRR_OP + SDATA + D_BUCKET)); /*XFER DISCONNECT MSG */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (SSI_OP + SSI_ITAR_DISC)); /*STOP AND INTERRUPT */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (CPN_OP + ASTATUS + UNKNWN)); /*JUMP IF NOT STATUS PHZ. */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MRR_OP + SDATA + D_AR0)); /*GET STATUS BYTE */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (CPN_OP + AMSG_IN + CC)); /*ERROR IF NOT MSG IN PHZ */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (CRD_OP + SDATA + 0x00)); /*CHECK FOR CMD COMPLETE MSG. */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (BRH_OP + NOT_EQ + CC)); /*ERROR IF NOT CMD COMPLETE MSG. */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (MRR_OP + SDATA + D_BUCKET)); /*GET CMD COMPLETE MSG */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (SSI_OP + SSI_ICMD_COMP)); /*END OF COMMAND */
|
|
map_addr += 2;
|
|
|
|
WRW_HARPOON(map_addr, (SSI_OP + SSI_IUNKWN)); /*RECEIVED UNKNOWN MSG BYTE */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (SSI_OP + SSI_INO_CC)); /*NO COMMAND COMPLETE AFTER STATUS */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (SSI_OP + SSI_ITICKLE)); /*BIOS Tickled the Mgr */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (SSI_OP + SSI_IRFAIL)); /*EXPECTED ID/TAG MESSAGES AND */
|
|
map_addr += 2; /* DIDN'T GET ONE */
|
|
WRW_HARPOON(map_addr, (CRR_OP + AR3 + S_IDREG)); /* comp SCSI SEL ID & AR3 */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (BRH_OP + EQUAL + 0x00)); /*SEL ID OK then Conti. */
|
|
map_addr += 2;
|
|
WRW_HARPOON(map_addr, (SSI_OP + SSI_INO_CC)); /*NO COMMAND COMPLETE AFTER STATUS */
|
|
|
|
SGRAM_ACCESS(p_port);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Auto Command Complete
|
|
*
|
|
* Description: Post command back to host and find another command
|
|
* to execute.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_autoCmdCmplt(u32 p_port, unsigned char p_card)
|
|
{
|
|
struct sccb *currSCCB;
|
|
unsigned char status_byte;
|
|
|
|
currSCCB = FPT_BL_Card[p_card].currentSCCB;
|
|
|
|
status_byte = RD_HARPOON(p_port + hp_gp_reg_0);
|
|
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUN_CA = 0;
|
|
|
|
if (status_byte != SSGOOD) {
|
|
|
|
if (status_byte == SSQ_FULL) {
|
|
|
|
if (((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
|
|
((FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))) {
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarLUNBusy[currSCCB->Lun] = 1;
|
|
if (FPT_BL_Card[p_card].discQCount != 0)
|
|
FPT_BL_Card[p_card].discQCount--;
|
|
FPT_BL_Card[p_card].
|
|
discQ_Tbl[FPT_sccbMgrTbl[p_card]
|
|
[currSCCB->TargID].
|
|
LunDiscQ_Idx[currSCCB->Lun]] =
|
|
NULL;
|
|
} else {
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarLUNBusy[0] = 1;
|
|
if (currSCCB->Sccb_tag) {
|
|
if (FPT_BL_Card[p_card].discQCount != 0)
|
|
FPT_BL_Card[p_card].
|
|
discQCount--;
|
|
FPT_BL_Card[p_card].discQ_Tbl[currSCCB->
|
|
Sccb_tag]
|
|
= NULL;
|
|
} else {
|
|
if (FPT_BL_Card[p_card].discQCount != 0)
|
|
FPT_BL_Card[p_card].
|
|
discQCount--;
|
|
FPT_BL_Card[p_card].
|
|
discQ_Tbl[FPT_sccbMgrTbl[p_card]
|
|
[currSCCB->TargID].
|
|
LunDiscQ_Idx[0]] = NULL;
|
|
}
|
|
}
|
|
|
|
currSCCB->Sccb_MGRFlags |= F_STATUSLOADED;
|
|
|
|
FPT_queueSelectFail(&FPT_BL_Card[p_card], p_card);
|
|
|
|
return;
|
|
}
|
|
|
|
if (currSCCB->Sccb_scsistat == SELECT_SN_ST) {
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus |=
|
|
(unsigned char)SYNC_SUPPORTED;
|
|
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarEEValue &=
|
|
~EE_SYNC_MASK;
|
|
FPT_BL_Card[p_card].globalFlags |= F_NEW_SCCB_CMD;
|
|
|
|
if (((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
|
|
((FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))) {
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarLUNBusy[currSCCB->Lun] = 1;
|
|
if (FPT_BL_Card[p_card].discQCount != 0)
|
|
FPT_BL_Card[p_card].discQCount--;
|
|
FPT_BL_Card[p_card].
|
|
discQ_Tbl[FPT_sccbMgrTbl[p_card]
|
|
[currSCCB->TargID].
|
|
LunDiscQ_Idx[currSCCB->Lun]] =
|
|
NULL;
|
|
} else {
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarLUNBusy[0] = 1;
|
|
if (currSCCB->Sccb_tag) {
|
|
if (FPT_BL_Card[p_card].discQCount != 0)
|
|
FPT_BL_Card[p_card].
|
|
discQCount--;
|
|
FPT_BL_Card[p_card].discQ_Tbl[currSCCB->
|
|
Sccb_tag]
|
|
= NULL;
|
|
} else {
|
|
if (FPT_BL_Card[p_card].discQCount != 0)
|
|
FPT_BL_Card[p_card].
|
|
discQCount--;
|
|
FPT_BL_Card[p_card].
|
|
discQ_Tbl[FPT_sccbMgrTbl[p_card]
|
|
[currSCCB->TargID].
|
|
LunDiscQ_Idx[0]] = NULL;
|
|
}
|
|
}
|
|
return;
|
|
|
|
}
|
|
|
|
if (currSCCB->Sccb_scsistat == SELECT_WN_ST) {
|
|
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus =
|
|
(FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarStatus & ~WIDE_ENABLED) | WIDE_NEGOCIATED;
|
|
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarEEValue &=
|
|
~EE_WIDE_SCSI;
|
|
FPT_BL_Card[p_card].globalFlags |= F_NEW_SCCB_CMD;
|
|
|
|
if (((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
|
|
((FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))) {
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarLUNBusy[currSCCB->Lun] = 1;
|
|
if (FPT_BL_Card[p_card].discQCount != 0)
|
|
FPT_BL_Card[p_card].discQCount--;
|
|
FPT_BL_Card[p_card].
|
|
discQ_Tbl[FPT_sccbMgrTbl[p_card]
|
|
[currSCCB->TargID].
|
|
LunDiscQ_Idx[currSCCB->Lun]] =
|
|
NULL;
|
|
} else {
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarLUNBusy[0] = 1;
|
|
if (currSCCB->Sccb_tag) {
|
|
if (FPT_BL_Card[p_card].discQCount != 0)
|
|
FPT_BL_Card[p_card].
|
|
discQCount--;
|
|
FPT_BL_Card[p_card].discQ_Tbl[currSCCB->
|
|
Sccb_tag]
|
|
= NULL;
|
|
} else {
|
|
if (FPT_BL_Card[p_card].discQCount != 0)
|
|
FPT_BL_Card[p_card].
|
|
discQCount--;
|
|
FPT_BL_Card[p_card].
|
|
discQ_Tbl[FPT_sccbMgrTbl[p_card]
|
|
[currSCCB->TargID].
|
|
LunDiscQ_Idx[0]] = NULL;
|
|
}
|
|
}
|
|
return;
|
|
|
|
}
|
|
|
|
if (status_byte == SSCHECK) {
|
|
if (FPT_BL_Card[p_card].globalFlags & F_DO_RENEGO) {
|
|
if (FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarEEValue & EE_SYNC_MASK) {
|
|
FPT_sccbMgrTbl[p_card][currSCCB->
|
|
TargID].
|
|
TarStatus &= ~TAR_SYNC_MASK;
|
|
}
|
|
if (FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarEEValue & EE_WIDE_SCSI) {
|
|
FPT_sccbMgrTbl[p_card][currSCCB->
|
|
TargID].
|
|
TarStatus &= ~TAR_WIDE_MASK;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!(currSCCB->Sccb_XferState & F_AUTO_SENSE)) {
|
|
|
|
currSCCB->SccbStatus = SCCB_ERROR;
|
|
currSCCB->TargetStatus = status_byte;
|
|
|
|
if (status_byte == SSCHECK) {
|
|
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarLUN_CA = 1;
|
|
|
|
if (currSCCB->RequestSenseLength !=
|
|
NO_AUTO_REQUEST_SENSE) {
|
|
|
|
if (currSCCB->RequestSenseLength == 0)
|
|
currSCCB->RequestSenseLength =
|
|
14;
|
|
|
|
FPT_ssenss(&FPT_BL_Card[p_card]);
|
|
FPT_BL_Card[p_card].globalFlags |=
|
|
F_NEW_SCCB_CMD;
|
|
|
|
if (((FPT_BL_Card[p_card].
|
|
globalFlags & F_CONLUN_IO)
|
|
&&
|
|
((FPT_sccbMgrTbl[p_card]
|
|
[currSCCB->TargID].
|
|
TarStatus & TAR_TAG_Q_MASK) !=
|
|
TAG_Q_TRYING))) {
|
|
FPT_sccbMgrTbl[p_card]
|
|
[currSCCB->TargID].
|
|
TarLUNBusy[currSCCB->Lun] =
|
|
1;
|
|
if (FPT_BL_Card[p_card].
|
|
discQCount != 0)
|
|
FPT_BL_Card[p_card].
|
|
discQCount--;
|
|
FPT_BL_Card[p_card].
|
|
discQ_Tbl[FPT_sccbMgrTbl
|
|
[p_card]
|
|
[currSCCB->
|
|
TargID].
|
|
LunDiscQ_Idx
|
|
[currSCCB->Lun]] =
|
|
NULL;
|
|
} else {
|
|
FPT_sccbMgrTbl[p_card]
|
|
[currSCCB->TargID].
|
|
TarLUNBusy[0] = 1;
|
|
if (currSCCB->Sccb_tag) {
|
|
if (FPT_BL_Card[p_card].
|
|
discQCount != 0)
|
|
FPT_BL_Card
|
|
[p_card].
|
|
discQCount--;
|
|
FPT_BL_Card[p_card].
|
|
discQ_Tbl[currSCCB->
|
|
Sccb_tag]
|
|
= NULL;
|
|
} else {
|
|
if (FPT_BL_Card[p_card].
|
|
discQCount != 0)
|
|
FPT_BL_Card
|
|
[p_card].
|
|
discQCount--;
|
|
FPT_BL_Card[p_card].
|
|
discQ_Tbl
|
|
[FPT_sccbMgrTbl
|
|
[p_card][currSCCB->
|
|
TargID].
|
|
LunDiscQ_Idx[0]] =
|
|
NULL;
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if ((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
|
|
((FPT_sccbMgrTbl[p_card][currSCCB->TargID].
|
|
TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[currSCCB->
|
|
Lun] = 0;
|
|
else
|
|
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[0] = 0;
|
|
|
|
FPT_queueCmdComplete(&FPT_BL_Card[p_card], currSCCB, p_card);
|
|
}
|
|
|
|
#define SHORT_WAIT 0x0000000F
|
|
#define LONG_WAIT 0x0000FFFFL
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Data Transfer Processor
|
|
*
|
|
* Description: This routine performs two tasks.
|
|
* (1) Start data transfer by calling HOST_DATA_XFER_START
|
|
* function. Once data transfer is started, (2) Depends
|
|
* on the type of data transfer mode Scatter/Gather mode
|
|
* or NON Scatter/Gather mode. In NON Scatter/Gather mode,
|
|
* this routine checks Sccb_MGRFlag (F_HOST_XFER_ACT bit) for
|
|
* data transfer done. In Scatter/Gather mode, this routine
|
|
* checks bus master command complete and dual rank busy
|
|
* bit to keep chaining SC transfer command. Similarly,
|
|
* in Scatter/Gather mode, it checks Sccb_MGRFlag
|
|
* (F_HOST_XFER_ACT bit) for data transfer done.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_dataXferProcessor(u32 port, struct sccb_card *pCurrCard)
|
|
{
|
|
struct sccb *currSCCB;
|
|
|
|
currSCCB = pCurrCard->currentSCCB;
|
|
|
|
if (currSCCB->Sccb_XferState & F_SG_XFER) {
|
|
if (pCurrCard->globalFlags & F_HOST_XFER_ACT)
|
|
{
|
|
currSCCB->Sccb_sgseg += (unsigned char)SG_BUF_CNT;
|
|
currSCCB->Sccb_SGoffset = 0x00;
|
|
}
|
|
pCurrCard->globalFlags |= F_HOST_XFER_ACT;
|
|
|
|
FPT_busMstrSGDataXferStart(port, currSCCB);
|
|
}
|
|
|
|
else {
|
|
if (!(pCurrCard->globalFlags & F_HOST_XFER_ACT)) {
|
|
pCurrCard->globalFlags |= F_HOST_XFER_ACT;
|
|
|
|
FPT_busMstrDataXferStart(port, currSCCB);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: BusMaster Scatter Gather Data Transfer Start
|
|
*
|
|
* Description:
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FPT_busMstrSGDataXferStart(u32 p_port, struct sccb *pcurrSCCB)
|
|
{
|
|
u32 count, addr, tmpSGCnt;
|
|
unsigned int sg_index;
|
|
unsigned char sg_count, i;
|
|
u32 reg_offset;
|
|
struct blogic_sg_seg *segp;
|
|
|
|
if (pcurrSCCB->Sccb_XferState & F_HOST_XFER_DIR)
|
|
count = ((u32)HOST_RD_CMD) << 24;
|
|
else
|
|
count = ((u32)HOST_WRT_CMD) << 24;
|
|
|
|
sg_count = 0;
|
|
tmpSGCnt = 0;
|
|
sg_index = pcurrSCCB->Sccb_sgseg;
|
|
reg_offset = hp_aramBase;
|
|
|
|
i = (unsigned char)(RD_HARPOON(p_port + hp_page_ctrl) &
|
|
~(SGRAM_ARAM | SCATTER_EN));
|
|
|
|
WR_HARPOON(p_port + hp_page_ctrl, i);
|
|
|
|
while ((sg_count < (unsigned char)SG_BUF_CNT) &&
|
|
((sg_index * (unsigned int)SG_ELEMENT_SIZE) <
|
|
pcurrSCCB->DataLength)) {
|
|
|
|
segp = (struct blogic_sg_seg *)(pcurrSCCB->DataPointer) +
|
|
sg_index;
|
|
tmpSGCnt += segp->segbytes;
|
|
count |= segp->segbytes;
|
|
addr = segp->segdata;
|
|
|
|
if ((!sg_count) && (pcurrSCCB->Sccb_SGoffset)) {
|
|
addr +=
|
|
((count & 0x00FFFFFFL) - pcurrSCCB->Sccb_SGoffset);
|
|
count =
|
|
(count & 0xFF000000L) | pcurrSCCB->Sccb_SGoffset;
|
|
tmpSGCnt = count & 0x00FFFFFFL;
|
|
}
|
|
|
|
WR_HARP32(p_port, reg_offset, addr);
|
|
reg_offset += 4;
|
|
|
|
WR_HARP32(p_port, reg_offset, count);
|
|
reg_offset += 4;
|
|
|
|
count &= 0xFF000000L;
|
|
sg_index++;
|
|
sg_count++;
|
|
|
|
} /*End While */
|
|
|
|
pcurrSCCB->Sccb_XferCnt = tmpSGCnt;
|
|
|
|
WR_HARPOON(p_port + hp_sg_addr, (sg_count << 4));
|
|
|
|
if (pcurrSCCB->Sccb_XferState & F_HOST_XFER_DIR) {
|
|
|
|
WR_HARP32(p_port, hp_xfercnt_0, tmpSGCnt);
|
|
|
|
WR_HARPOON(p_port + hp_portctrl_0,
|
|
(DMA_PORT | SCSI_PORT | SCSI_INBIT));
|
|
WR_HARPOON(p_port + hp_scsisig, S_DATAI_PH);
|
|
}
|
|
|
|
else {
|
|
|
|
if ((!(RD_HARPOON(p_port + hp_synctarg_0) & NARROW_SCSI)) &&
|
|
(tmpSGCnt & 0x000000001)) {
|
|
|
|
pcurrSCCB->Sccb_XferState |= F_ODD_BALL_CNT;
|
|
tmpSGCnt--;
|
|
}
|
|
|
|
WR_HARP32(p_port, hp_xfercnt_0, tmpSGCnt);
|
|
|
|
WR_HARPOON(p_port + hp_portctrl_0,
|
|
(SCSI_PORT | DMA_PORT | DMA_RD));
|
|
WR_HARPOON(p_port + hp_scsisig, S_DATAO_PH);
|
|
}
|
|
|
|
WR_HARPOON(p_port + hp_page_ctrl, (unsigned char)(i | SCATTER_EN));
|
|
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: BusMaster Data Transfer Start
|
|
*
|
|
* Description:
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FPT_busMstrDataXferStart(u32 p_port, struct sccb *pcurrSCCB)
|
|
{
|
|
u32 addr, count;
|
|
|
|
if (!(pcurrSCCB->Sccb_XferState & F_AUTO_SENSE)) {
|
|
|
|
count = pcurrSCCB->Sccb_XferCnt;
|
|
|
|
addr = (u32)(unsigned long)pcurrSCCB->DataPointer + pcurrSCCB->Sccb_ATC;
|
|
}
|
|
|
|
else {
|
|
addr = pcurrSCCB->SensePointer;
|
|
count = pcurrSCCB->RequestSenseLength;
|
|
|
|
}
|
|
|
|
HP_SETUP_ADDR_CNT(p_port, addr, count);
|
|
|
|
if (pcurrSCCB->Sccb_XferState & F_HOST_XFER_DIR) {
|
|
|
|
WR_HARPOON(p_port + hp_portctrl_0,
|
|
(DMA_PORT | SCSI_PORT | SCSI_INBIT));
|
|
WR_HARPOON(p_port + hp_scsisig, S_DATAI_PH);
|
|
|
|
WR_HARPOON(p_port + hp_xfer_cmd,
|
|
(XFER_DMA_HOST | XFER_HOST_AUTO | XFER_DMA_8BIT));
|
|
}
|
|
|
|
else {
|
|
|
|
WR_HARPOON(p_port + hp_portctrl_0,
|
|
(SCSI_PORT | DMA_PORT | DMA_RD));
|
|
WR_HARPOON(p_port + hp_scsisig, S_DATAO_PH);
|
|
|
|
WR_HARPOON(p_port + hp_xfer_cmd,
|
|
(XFER_HOST_DMA | XFER_HOST_AUTO | XFER_DMA_8BIT));
|
|
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: BusMaster Timeout Handler
|
|
*
|
|
* Description: This function is called after a bus master command busy time
|
|
* out is detected. This routines issue halt state machine
|
|
* with a software time out for command busy. If command busy
|
|
* is still asserted at the end of the time out, it issues
|
|
* hard abort with another software time out. It hard abort
|
|
* command busy is also time out, it'll just give up.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static unsigned char FPT_busMstrTimeOut(u32 p_port)
|
|
{
|
|
unsigned long timeout;
|
|
|
|
timeout = LONG_WAIT;
|
|
|
|
WR_HARPOON(p_port + hp_sys_ctrl, HALT_MACH);
|
|
|
|
while ((!(RD_HARPOON(p_port + hp_ext_status) & CMD_ABORTED))
|
|
&& timeout--) {
|
|
}
|
|
|
|
if (RD_HARPOON(p_port + hp_ext_status) & BM_CMD_BUSY) {
|
|
WR_HARPOON(p_port + hp_sys_ctrl, HARD_ABORT);
|
|
|
|
timeout = LONG_WAIT;
|
|
while ((RD_HARPOON(p_port + hp_ext_status) & BM_CMD_BUSY)
|
|
&& timeout--) {
|
|
}
|
|
}
|
|
|
|
RD_HARPOON(p_port + hp_int_status); /*Clear command complete */
|
|
|
|
if (RD_HARPOON(p_port + hp_ext_status) & BM_CMD_BUSY) {
|
|
return 1;
|
|
}
|
|
|
|
else {
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Host Data Transfer Abort
|
|
*
|
|
* Description: Abort any in progress transfer.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FPT_hostDataXferAbort(u32 port, unsigned char p_card,
|
|
struct sccb *pCurrSCCB)
|
|
{
|
|
|
|
unsigned long timeout;
|
|
unsigned long remain_cnt;
|
|
u32 sg_ptr;
|
|
struct blogic_sg_seg *segp;
|
|
|
|
FPT_BL_Card[p_card].globalFlags &= ~F_HOST_XFER_ACT;
|
|
|
|
if (pCurrSCCB->Sccb_XferState & F_AUTO_SENSE) {
|
|
|
|
if (!(RD_HARPOON(port + hp_int_status) & INT_CMD_COMPL)) {
|
|
|
|
WR_HARPOON(port + hp_bm_ctrl,
|
|
(RD_HARPOON(port + hp_bm_ctrl) |
|
|
FLUSH_XFER_CNTR));
|
|
timeout = LONG_WAIT;
|
|
|
|
while ((RD_HARPOON(port + hp_ext_status) & BM_CMD_BUSY)
|
|
&& timeout--) {
|
|
}
|
|
|
|
WR_HARPOON(port + hp_bm_ctrl,
|
|
(RD_HARPOON(port + hp_bm_ctrl) &
|
|
~FLUSH_XFER_CNTR));
|
|
|
|
if (RD_HARPOON(port + hp_ext_status) & BM_CMD_BUSY) {
|
|
|
|
if (FPT_busMstrTimeOut(port)) {
|
|
|
|
if (pCurrSCCB->HostStatus == 0x00)
|
|
|
|
pCurrSCCB->HostStatus =
|
|
SCCB_BM_ERR;
|
|
|
|
}
|
|
|
|
if (RD_HARPOON(port + hp_int_status) &
|
|
INT_EXT_STATUS)
|
|
|
|
if (RD_HARPOON(port + hp_ext_status) &
|
|
BAD_EXT_STATUS)
|
|
|
|
if (pCurrSCCB->HostStatus ==
|
|
0x00)
|
|
{
|
|
pCurrSCCB->HostStatus =
|
|
SCCB_BM_ERR;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
else if (pCurrSCCB->Sccb_XferCnt) {
|
|
|
|
if (pCurrSCCB->Sccb_XferState & F_SG_XFER) {
|
|
|
|
WR_HARPOON(port + hp_page_ctrl,
|
|
(RD_HARPOON(port + hp_page_ctrl) &
|
|
~SCATTER_EN));
|
|
|
|
WR_HARPOON(port + hp_sg_addr, 0x00);
|
|
|
|
sg_ptr = pCurrSCCB->Sccb_sgseg + SG_BUF_CNT;
|
|
|
|
if (sg_ptr >
|
|
(unsigned int)(pCurrSCCB->DataLength /
|
|
SG_ELEMENT_SIZE)) {
|
|
|
|
sg_ptr = (u32)(pCurrSCCB->DataLength /
|
|
SG_ELEMENT_SIZE);
|
|
}
|
|
|
|
remain_cnt = pCurrSCCB->Sccb_XferCnt;
|
|
|
|
while (remain_cnt < 0x01000000L) {
|
|
|
|
sg_ptr--;
|
|
segp = (struct blogic_sg_seg *)(pCurrSCCB->
|
|
DataPointer) + (sg_ptr * 2);
|
|
if (remain_cnt > (unsigned long)segp->segbytes)
|
|
remain_cnt -=
|
|
(unsigned long)segp->segbytes;
|
|
else
|
|
break;
|
|
}
|
|
|
|
if (remain_cnt < 0x01000000L) {
|
|
|
|
pCurrSCCB->Sccb_SGoffset = remain_cnt;
|
|
|
|
pCurrSCCB->Sccb_sgseg = (unsigned short)sg_ptr;
|
|
|
|
if ((unsigned long)(sg_ptr * SG_ELEMENT_SIZE) ==
|
|
pCurrSCCB->DataLength && (remain_cnt == 0))
|
|
|
|
pCurrSCCB->Sccb_XferState |=
|
|
F_ALL_XFERRED;
|
|
}
|
|
|
|
else {
|
|
|
|
if (pCurrSCCB->HostStatus == 0x00) {
|
|
|
|
pCurrSCCB->HostStatus =
|
|
SCCB_GROSS_FW_ERR;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!(pCurrSCCB->Sccb_XferState & F_HOST_XFER_DIR)) {
|
|
|
|
if (RD_HARPOON(port + hp_ext_status) & BM_CMD_BUSY) {
|
|
|
|
FPT_busMstrTimeOut(port);
|
|
}
|
|
|
|
else {
|
|
|
|
if (RD_HARPOON(port + hp_int_status) &
|
|
INT_EXT_STATUS) {
|
|
|
|
if (RD_HARPOON(port + hp_ext_status) &
|
|
BAD_EXT_STATUS) {
|
|
|
|
if (pCurrSCCB->HostStatus ==
|
|
0x00) {
|
|
|
|
pCurrSCCB->HostStatus =
|
|
SCCB_BM_ERR;
|
|
}
|
|
}
|
|
}
|
|
|
|
}
|
|
}
|
|
|
|
else {
|
|
|
|
if ((RD_HARPOON(port + hp_fifo_cnt)) >= BM_THRESHOLD) {
|
|
|
|
timeout = SHORT_WAIT;
|
|
|
|
while ((RD_HARPOON(port + hp_ext_status) &
|
|
BM_CMD_BUSY)
|
|
&& ((RD_HARPOON(port + hp_fifo_cnt)) >=
|
|
BM_THRESHOLD) && timeout--) {
|
|
}
|
|
}
|
|
|
|
if (RD_HARPOON(port + hp_ext_status) & BM_CMD_BUSY) {
|
|
|
|
WR_HARPOON(port + hp_bm_ctrl,
|
|
(RD_HARPOON(port + hp_bm_ctrl) |
|
|
FLUSH_XFER_CNTR));
|
|
|
|
timeout = LONG_WAIT;
|
|
|
|
while ((RD_HARPOON(port + hp_ext_status) &
|
|
BM_CMD_BUSY) && timeout--) {
|
|
}
|
|
|
|
WR_HARPOON(port + hp_bm_ctrl,
|
|
(RD_HARPOON(port + hp_bm_ctrl) &
|
|
~FLUSH_XFER_CNTR));
|
|
|
|
if (RD_HARPOON(port + hp_ext_status) &
|
|
BM_CMD_BUSY) {
|
|
|
|
if (pCurrSCCB->HostStatus == 0x00) {
|
|
|
|
pCurrSCCB->HostStatus =
|
|
SCCB_BM_ERR;
|
|
}
|
|
|
|
FPT_busMstrTimeOut(port);
|
|
}
|
|
}
|
|
|
|
if (RD_HARPOON(port + hp_int_status) & INT_EXT_STATUS) {
|
|
|
|
if (RD_HARPOON(port + hp_ext_status) &
|
|
BAD_EXT_STATUS) {
|
|
|
|
if (pCurrSCCB->HostStatus == 0x00) {
|
|
|
|
pCurrSCCB->HostStatus =
|
|
SCCB_BM_ERR;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
if (RD_HARPOON(port + hp_ext_status) & BM_CMD_BUSY) {
|
|
|
|
timeout = LONG_WAIT;
|
|
|
|
while ((RD_HARPOON(port + hp_ext_status) & BM_CMD_BUSY)
|
|
&& timeout--) {
|
|
}
|
|
|
|
if (RD_HARPOON(port + hp_ext_status) & BM_CMD_BUSY) {
|
|
|
|
if (pCurrSCCB->HostStatus == 0x00) {
|
|
|
|
pCurrSCCB->HostStatus = SCCB_BM_ERR;
|
|
}
|
|
|
|
FPT_busMstrTimeOut(port);
|
|
}
|
|
}
|
|
|
|
if (RD_HARPOON(port + hp_int_status) & INT_EXT_STATUS) {
|
|
|
|
if (RD_HARPOON(port + hp_ext_status) & BAD_EXT_STATUS) {
|
|
|
|
if (pCurrSCCB->HostStatus == 0x00) {
|
|
|
|
pCurrSCCB->HostStatus = SCCB_BM_ERR;
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
if (pCurrSCCB->Sccb_XferState & F_SG_XFER) {
|
|
|
|
WR_HARPOON(port + hp_page_ctrl,
|
|
(RD_HARPOON(port + hp_page_ctrl) &
|
|
~SCATTER_EN));
|
|
|
|
WR_HARPOON(port + hp_sg_addr, 0x00);
|
|
|
|
pCurrSCCB->Sccb_sgseg += SG_BUF_CNT;
|
|
|
|
pCurrSCCB->Sccb_SGoffset = 0x00;
|
|
|
|
if ((u32)(pCurrSCCB->Sccb_sgseg * SG_ELEMENT_SIZE) >=
|
|
pCurrSCCB->DataLength) {
|
|
|
|
pCurrSCCB->Sccb_XferState |= F_ALL_XFERRED;
|
|
pCurrSCCB->Sccb_sgseg =
|
|
(unsigned short)(pCurrSCCB->DataLength /
|
|
SG_ELEMENT_SIZE);
|
|
}
|
|
}
|
|
|
|
else {
|
|
if (!(pCurrSCCB->Sccb_XferState & F_AUTO_SENSE))
|
|
pCurrSCCB->Sccb_XferState |= F_ALL_XFERRED;
|
|
}
|
|
}
|
|
|
|
WR_HARPOON(port + hp_int_mask, (INT_CMD_COMPL | SCSI_INTERRUPT));
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Host Data Transfer Restart
|
|
*
|
|
* Description: Reset the available count due to a restore data
|
|
* pointers message.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FPT_hostDataXferRestart(struct sccb *currSCCB)
|
|
{
|
|
unsigned long data_count;
|
|
unsigned int sg_index;
|
|
struct blogic_sg_seg *segp;
|
|
|
|
if (currSCCB->Sccb_XferState & F_SG_XFER) {
|
|
|
|
currSCCB->Sccb_XferCnt = 0;
|
|
|
|
sg_index = 0xffff; /*Index by long words into sg list. */
|
|
data_count = 0; /*Running count of SG xfer counts. */
|
|
|
|
|
|
while (data_count < currSCCB->Sccb_ATC) {
|
|
|
|
sg_index++;
|
|
segp = (struct blogic_sg_seg *)(currSCCB->DataPointer) +
|
|
(sg_index * 2);
|
|
data_count += segp->segbytes;
|
|
}
|
|
|
|
if (data_count == currSCCB->Sccb_ATC) {
|
|
|
|
currSCCB->Sccb_SGoffset = 0;
|
|
sg_index++;
|
|
}
|
|
|
|
else {
|
|
currSCCB->Sccb_SGoffset =
|
|
data_count - currSCCB->Sccb_ATC;
|
|
}
|
|
|
|
currSCCB->Sccb_sgseg = (unsigned short)sg_index;
|
|
}
|
|
|
|
else {
|
|
currSCCB->Sccb_XferCnt =
|
|
currSCCB->DataLength - currSCCB->Sccb_ATC;
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_scini
|
|
*
|
|
* Description: Setup all data structures necessary for SCAM selection.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_scini(unsigned char p_card, unsigned char p_our_id,
|
|
unsigned char p_power_up)
|
|
{
|
|
|
|
unsigned char loser, assigned_id;
|
|
u32 p_port;
|
|
|
|
unsigned char i, k, ScamFlg;
|
|
struct sccb_card *currCard;
|
|
struct nvram_info *pCurrNvRam;
|
|
|
|
currCard = &FPT_BL_Card[p_card];
|
|
p_port = currCard->ioPort;
|
|
pCurrNvRam = currCard->pNvRamInfo;
|
|
|
|
if (pCurrNvRam) {
|
|
ScamFlg = pCurrNvRam->niScamConf;
|
|
i = pCurrNvRam->niSysConf;
|
|
} else {
|
|
ScamFlg =
|
|
(unsigned char)FPT_utilEERead(p_port, SCAM_CONFIG / 2);
|
|
i = (unsigned
|
|
char)(FPT_utilEERead(p_port, (SYSTEM_CONFIG / 2)));
|
|
}
|
|
if (!(i & 0x02)) /* check if reset bus in AutoSCSI parameter set */
|
|
return;
|
|
|
|
FPT_inisci(p_card, p_port, p_our_id);
|
|
|
|
/* Force to wait 1 sec after SCSI bus reset. Some SCAM device FW
|
|
too slow to return to SCAM selection */
|
|
|
|
/* if (p_power_up)
|
|
FPT_Wait1Second(p_port);
|
|
else
|
|
FPT_Wait(p_port, TO_250ms); */
|
|
|
|
FPT_Wait1Second(p_port);
|
|
|
|
if ((ScamFlg & SCAM_ENABLED) && (ScamFlg & SCAM_LEVEL2)) {
|
|
while (!(FPT_scarb(p_port, INIT_SELTD))) {
|
|
}
|
|
|
|
FPT_scsel(p_port);
|
|
|
|
do {
|
|
FPT_scxferc(p_port, SYNC_PTRN);
|
|
FPT_scxferc(p_port, DOM_MSTR);
|
|
loser =
|
|
FPT_scsendi(p_port,
|
|
&FPT_scamInfo[p_our_id].id_string[0]);
|
|
} while (loser == 0xFF);
|
|
|
|
FPT_scbusf(p_port);
|
|
|
|
if ((p_power_up) && (!loser)) {
|
|
FPT_sresb(p_port, p_card);
|
|
FPT_Wait(p_port, TO_250ms);
|
|
|
|
while (!(FPT_scarb(p_port, INIT_SELTD))) {
|
|
}
|
|
|
|
FPT_scsel(p_port);
|
|
|
|
do {
|
|
FPT_scxferc(p_port, SYNC_PTRN);
|
|
FPT_scxferc(p_port, DOM_MSTR);
|
|
loser =
|
|
FPT_scsendi(p_port,
|
|
&FPT_scamInfo[p_our_id].
|
|
id_string[0]);
|
|
} while (loser == 0xFF);
|
|
|
|
FPT_scbusf(p_port);
|
|
}
|
|
}
|
|
|
|
else {
|
|
loser = 0;
|
|
}
|
|
|
|
if (!loser) {
|
|
|
|
FPT_scamInfo[p_our_id].state = ID_ASSIGNED;
|
|
|
|
if (ScamFlg & SCAM_ENABLED) {
|
|
|
|
for (i = 0; i < MAX_SCSI_TAR; i++) {
|
|
if ((FPT_scamInfo[i].state == ID_UNASSIGNED) ||
|
|
(FPT_scamInfo[i].state == ID_UNUSED)) {
|
|
if (FPT_scsell(p_port, i)) {
|
|
FPT_scamInfo[i].state = LEGACY;
|
|
if ((FPT_scamInfo[i].
|
|
id_string[0] != 0xFF)
|
|
|| (FPT_scamInfo[i].
|
|
id_string[1] != 0xFA)) {
|
|
|
|
FPT_scamInfo[i].
|
|
id_string[0] = 0xFF;
|
|
FPT_scamInfo[i].
|
|
id_string[1] = 0xFA;
|
|
if (pCurrNvRam == NULL)
|
|
currCard->
|
|
globalFlags
|
|
|=
|
|
F_UPDATE_EEPROM;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
FPT_sresb(p_port, p_card);
|
|
FPT_Wait1Second(p_port);
|
|
while (!(FPT_scarb(p_port, INIT_SELTD))) {
|
|
}
|
|
FPT_scsel(p_port);
|
|
FPT_scasid(p_card, p_port);
|
|
}
|
|
|
|
}
|
|
|
|
else if ((loser) && (ScamFlg & SCAM_ENABLED)) {
|
|
FPT_scamInfo[p_our_id].id_string[0] = SLV_TYPE_CODE0;
|
|
assigned_id = 0;
|
|
FPT_scwtsel(p_port);
|
|
|
|
do {
|
|
while (FPT_scxferc(p_port, 0x00) != SYNC_PTRN) {
|
|
}
|
|
|
|
i = FPT_scxferc(p_port, 0x00);
|
|
if (i == ASSIGN_ID) {
|
|
if (!
|
|
(FPT_scsendi
|
|
(p_port,
|
|
&FPT_scamInfo[p_our_id].id_string[0]))) {
|
|
i = FPT_scxferc(p_port, 0x00);
|
|
if (FPT_scvalq(i)) {
|
|
k = FPT_scxferc(p_port, 0x00);
|
|
|
|
if (FPT_scvalq(k)) {
|
|
currCard->ourId =
|
|
((unsigned char)(i
|
|
<<
|
|
3)
|
|
+
|
|
(k &
|
|
(unsigned char)7))
|
|
& (unsigned char)
|
|
0x3F;
|
|
FPT_inisci(p_card,
|
|
p_port,
|
|
p_our_id);
|
|
FPT_scamInfo[currCard->
|
|
ourId].
|
|
state = ID_ASSIGNED;
|
|
FPT_scamInfo[currCard->
|
|
ourId].
|
|
id_string[0]
|
|
= SLV_TYPE_CODE0;
|
|
assigned_id = 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
else if (i == SET_P_FLAG) {
|
|
if (!(FPT_scsendi(p_port,
|
|
&FPT_scamInfo[p_our_id].
|
|
id_string[0])))
|
|
FPT_scamInfo[p_our_id].id_string[0] |=
|
|
0x80;
|
|
}
|
|
} while (!assigned_id);
|
|
|
|
while (FPT_scxferc(p_port, 0x00) != CFG_CMPLT) {
|
|
}
|
|
}
|
|
|
|
if (ScamFlg & SCAM_ENABLED) {
|
|
FPT_scbusf(p_port);
|
|
if (currCard->globalFlags & F_UPDATE_EEPROM) {
|
|
FPT_scsavdi(p_card, p_port);
|
|
currCard->globalFlags &= ~F_UPDATE_EEPROM;
|
|
}
|
|
}
|
|
|
|
/*
|
|
for (i=0,k=0; i < MAX_SCSI_TAR; i++)
|
|
{
|
|
if ((FPT_scamInfo[i].state == ID_ASSIGNED) ||
|
|
(FPT_scamInfo[i].state == LEGACY))
|
|
k++;
|
|
}
|
|
|
|
if (k==2)
|
|
currCard->globalFlags |= F_SINGLE_DEVICE;
|
|
else
|
|
currCard->globalFlags &= ~F_SINGLE_DEVICE;
|
|
*/
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_scarb
|
|
*
|
|
* Description: Gain control of the bus and wait SCAM select time (250ms)
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static int FPT_scarb(u32 p_port, unsigned char p_sel_type)
|
|
{
|
|
if (p_sel_type == INIT_SELTD) {
|
|
|
|
while (RD_HARPOON(p_port + hp_scsisig) & (SCSI_SEL | SCSI_BSY)) {
|
|
}
|
|
|
|
if (RD_HARPOON(p_port + hp_scsisig) & SCSI_SEL)
|
|
return 0;
|
|
|
|
if (RD_HARPOON(p_port + hp_scsidata_0) != 00)
|
|
return 0;
|
|
|
|
WR_HARPOON(p_port + hp_scsisig,
|
|
(RD_HARPOON(p_port + hp_scsisig) | SCSI_BSY));
|
|
|
|
if (RD_HARPOON(p_port + hp_scsisig) & SCSI_SEL) {
|
|
|
|
WR_HARPOON(p_port + hp_scsisig,
|
|
(RD_HARPOON(p_port + hp_scsisig) &
|
|
~SCSI_BSY));
|
|
return 0;
|
|
}
|
|
|
|
WR_HARPOON(p_port + hp_scsisig,
|
|
(RD_HARPOON(p_port + hp_scsisig) | SCSI_SEL));
|
|
|
|
if (RD_HARPOON(p_port + hp_scsidata_0) != 00) {
|
|
|
|
WR_HARPOON(p_port + hp_scsisig,
|
|
(RD_HARPOON(p_port + hp_scsisig) &
|
|
~(SCSI_BSY | SCSI_SEL)));
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
WR_HARPOON(p_port + hp_clkctrl_0, (RD_HARPOON(p_port + hp_clkctrl_0)
|
|
& ~ACTdeassert));
|
|
WR_HARPOON(p_port + hp_scsireset, SCAM_EN);
|
|
WR_HARPOON(p_port + hp_scsidata_0, 0x00);
|
|
WR_HARPOON(p_port + hp_scsidata_1, 0x00);
|
|
WR_HARPOON(p_port + hp_portctrl_0, SCSI_BUS_EN);
|
|
|
|
WR_HARPOON(p_port + hp_scsisig,
|
|
(RD_HARPOON(p_port + hp_scsisig) | SCSI_MSG));
|
|
|
|
WR_HARPOON(p_port + hp_scsisig, (RD_HARPOON(p_port + hp_scsisig)
|
|
& ~SCSI_BSY));
|
|
|
|
FPT_Wait(p_port, TO_250ms);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_scbusf
|
|
*
|
|
* Description: Release the SCSI bus and disable SCAM selection.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_scbusf(u32 p_port)
|
|
{
|
|
WR_HARPOON(p_port + hp_page_ctrl,
|
|
(RD_HARPOON(p_port + hp_page_ctrl) | G_INT_DISABLE));
|
|
|
|
WR_HARPOON(p_port + hp_scsidata_0, 0x00);
|
|
|
|
WR_HARPOON(p_port + hp_portctrl_0, (RD_HARPOON(p_port + hp_portctrl_0)
|
|
& ~SCSI_BUS_EN));
|
|
|
|
WR_HARPOON(p_port + hp_scsisig, 0x00);
|
|
|
|
WR_HARPOON(p_port + hp_scsireset, (RD_HARPOON(p_port + hp_scsireset)
|
|
& ~SCAM_EN));
|
|
|
|
WR_HARPOON(p_port + hp_clkctrl_0, (RD_HARPOON(p_port + hp_clkctrl_0)
|
|
| ACTdeassert));
|
|
|
|
WRW_HARPOON((p_port + hp_intstat), (BUS_FREE | AUTO_INT | SCAM_SEL));
|
|
|
|
WR_HARPOON(p_port + hp_page_ctrl,
|
|
(RD_HARPOON(p_port + hp_page_ctrl) & ~G_INT_DISABLE));
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_scasid
|
|
*
|
|
* Description: Assign an ID to all the SCAM devices.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_scasid(unsigned char p_card, u32 p_port)
|
|
{
|
|
unsigned char temp_id_string[ID_STRING_LENGTH];
|
|
|
|
unsigned char i, k, scam_id;
|
|
unsigned char crcBytes[3];
|
|
struct nvram_info *pCurrNvRam;
|
|
unsigned short *pCrcBytes;
|
|
|
|
pCurrNvRam = FPT_BL_Card[p_card].pNvRamInfo;
|
|
|
|
i = 0;
|
|
|
|
while (!i) {
|
|
|
|
for (k = 0; k < ID_STRING_LENGTH; k++) {
|
|
temp_id_string[k] = (unsigned char)0x00;
|
|
}
|
|
|
|
FPT_scxferc(p_port, SYNC_PTRN);
|
|
FPT_scxferc(p_port, ASSIGN_ID);
|
|
|
|
if (!(FPT_sciso(p_port, &temp_id_string[0]))) {
|
|
if (pCurrNvRam) {
|
|
pCrcBytes = (unsigned short *)&crcBytes[0];
|
|
*pCrcBytes = FPT_CalcCrc16(&temp_id_string[0]);
|
|
crcBytes[2] = FPT_CalcLrc(&temp_id_string[0]);
|
|
temp_id_string[1] = crcBytes[2];
|
|
temp_id_string[2] = crcBytes[0];
|
|
temp_id_string[3] = crcBytes[1];
|
|
for (k = 4; k < ID_STRING_LENGTH; k++)
|
|
temp_id_string[k] = (unsigned char)0x00;
|
|
}
|
|
i = FPT_scmachid(p_card, temp_id_string);
|
|
|
|
if (i == CLR_PRIORITY) {
|
|
FPT_scxferc(p_port, MISC_CODE);
|
|
FPT_scxferc(p_port, CLR_P_FLAG);
|
|
i = 0; /*Not the last ID yet. */
|
|
}
|
|
|
|
else if (i != NO_ID_AVAIL) {
|
|
if (i < 8)
|
|
FPT_scxferc(p_port, ID_0_7);
|
|
else
|
|
FPT_scxferc(p_port, ID_8_F);
|
|
|
|
scam_id = (i & (unsigned char)0x07);
|
|
|
|
for (k = 1; k < 0x08; k <<= 1)
|
|
if (!(k & i))
|
|
scam_id += 0x08; /*Count number of zeros in DB0-3. */
|
|
|
|
FPT_scxferc(p_port, scam_id);
|
|
|
|
i = 0; /*Not the last ID yet. */
|
|
}
|
|
}
|
|
|
|
else {
|
|
i = 1;
|
|
}
|
|
|
|
} /*End while */
|
|
|
|
FPT_scxferc(p_port, SYNC_PTRN);
|
|
FPT_scxferc(p_port, CFG_CMPLT);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_scsel
|
|
*
|
|
* Description: Select all the SCAM devices.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_scsel(u32 p_port)
|
|
{
|
|
|
|
WR_HARPOON(p_port + hp_scsisig, SCSI_SEL);
|
|
FPT_scwiros(p_port, SCSI_MSG);
|
|
|
|
WR_HARPOON(p_port + hp_scsisig, (SCSI_SEL | SCSI_BSY));
|
|
|
|
WR_HARPOON(p_port + hp_scsisig,
|
|
(SCSI_SEL | SCSI_BSY | SCSI_IOBIT | SCSI_CD));
|
|
WR_HARPOON(p_port + hp_scsidata_0,
|
|
(unsigned char)(RD_HARPOON(p_port + hp_scsidata_0) |
|
|
(unsigned char)(BIT(7) + BIT(6))));
|
|
|
|
WR_HARPOON(p_port + hp_scsisig, (SCSI_BSY | SCSI_IOBIT | SCSI_CD));
|
|
FPT_scwiros(p_port, SCSI_SEL);
|
|
|
|
WR_HARPOON(p_port + hp_scsidata_0,
|
|
(unsigned char)(RD_HARPOON(p_port + hp_scsidata_0) &
|
|
~(unsigned char)BIT(6)));
|
|
FPT_scwirod(p_port, BIT(6));
|
|
|
|
WR_HARPOON(p_port + hp_scsisig,
|
|
(SCSI_SEL | SCSI_BSY | SCSI_IOBIT | SCSI_CD));
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_scxferc
|
|
*
|
|
* Description: Handshake the p_data (DB4-0) across the bus.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static unsigned char FPT_scxferc(u32 p_port, unsigned char p_data)
|
|
{
|
|
unsigned char curr_data, ret_data;
|
|
|
|
curr_data = p_data | BIT(7) | BIT(5); /*Start with DB7 & DB5 asserted. */
|
|
|
|
WR_HARPOON(p_port + hp_scsidata_0, curr_data);
|
|
|
|
curr_data &= ~BIT(7);
|
|
|
|
WR_HARPOON(p_port + hp_scsidata_0, curr_data);
|
|
|
|
FPT_scwirod(p_port, BIT(7)); /*Wait for DB7 to be released. */
|
|
while (!(RD_HARPOON(p_port + hp_scsidata_0) & BIT(5))) ;
|
|
|
|
ret_data = (RD_HARPOON(p_port + hp_scsidata_0) & (unsigned char)0x1F);
|
|
|
|
curr_data |= BIT(6);
|
|
|
|
WR_HARPOON(p_port + hp_scsidata_0, curr_data);
|
|
|
|
curr_data &= ~BIT(5);
|
|
|
|
WR_HARPOON(p_port + hp_scsidata_0, curr_data);
|
|
|
|
FPT_scwirod(p_port, BIT(5)); /*Wait for DB5 to be released. */
|
|
|
|
curr_data &= ~(BIT(4) | BIT(3) | BIT(2) | BIT(1) | BIT(0)); /*Release data bits */
|
|
curr_data |= BIT(7);
|
|
|
|
WR_HARPOON(p_port + hp_scsidata_0, curr_data);
|
|
|
|
curr_data &= ~BIT(6);
|
|
|
|
WR_HARPOON(p_port + hp_scsidata_0, curr_data);
|
|
|
|
FPT_scwirod(p_port, BIT(6)); /*Wait for DB6 to be released. */
|
|
|
|
return ret_data;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_scsendi
|
|
*
|
|
* Description: Transfer our Identification string to determine if we
|
|
* will be the dominant master.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static unsigned char FPT_scsendi(u32 p_port, unsigned char p_id_string[])
|
|
{
|
|
unsigned char ret_data, byte_cnt, bit_cnt, defer;
|
|
|
|
defer = 0;
|
|
|
|
for (byte_cnt = 0; byte_cnt < ID_STRING_LENGTH; byte_cnt++) {
|
|
|
|
for (bit_cnt = 0x80; bit_cnt != 0; bit_cnt >>= 1) {
|
|
|
|
if (defer)
|
|
ret_data = FPT_scxferc(p_port, 00);
|
|
|
|
else if (p_id_string[byte_cnt] & bit_cnt)
|
|
|
|
ret_data = FPT_scxferc(p_port, 02);
|
|
|
|
else {
|
|
|
|
ret_data = FPT_scxferc(p_port, 01);
|
|
if (ret_data & 02)
|
|
defer = 1;
|
|
}
|
|
|
|
if ((ret_data & 0x1C) == 0x10)
|
|
return 0x00; /*End of isolation stage, we won! */
|
|
|
|
if (ret_data & 0x1C)
|
|
return 0xFF;
|
|
|
|
if ((defer) && (!(ret_data & 0x1F)))
|
|
return 0x01; /*End of isolation stage, we lost. */
|
|
|
|
} /*bit loop */
|
|
|
|
} /*byte loop */
|
|
|
|
if (defer)
|
|
return 0x01; /*We lost */
|
|
else
|
|
return 0; /*We WON! Yeeessss! */
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_sciso
|
|
*
|
|
* Description: Transfer the Identification string.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static unsigned char FPT_sciso(u32 p_port, unsigned char p_id_string[])
|
|
{
|
|
unsigned char ret_data, the_data, byte_cnt, bit_cnt;
|
|
|
|
the_data = 0;
|
|
|
|
for (byte_cnt = 0; byte_cnt < ID_STRING_LENGTH; byte_cnt++) {
|
|
|
|
for (bit_cnt = 0; bit_cnt < 8; bit_cnt++) {
|
|
|
|
ret_data = FPT_scxferc(p_port, 0);
|
|
|
|
if (ret_data & 0xFC)
|
|
return 0xFF;
|
|
|
|
else {
|
|
|
|
the_data <<= 1;
|
|
if (ret_data & BIT(1)) {
|
|
the_data |= 1;
|
|
}
|
|
}
|
|
|
|
if ((ret_data & 0x1F) == 0) {
|
|
/*
|
|
if(bit_cnt != 0 || bit_cnt != 8)
|
|
{
|
|
byte_cnt = 0;
|
|
bit_cnt = 0;
|
|
FPT_scxferc(p_port, SYNC_PTRN);
|
|
FPT_scxferc(p_port, ASSIGN_ID);
|
|
continue;
|
|
}
|
|
*/
|
|
if (byte_cnt)
|
|
return 0x00;
|
|
else
|
|
return 0xFF;
|
|
}
|
|
|
|
} /*bit loop */
|
|
|
|
p_id_string[byte_cnt] = the_data;
|
|
|
|
} /*byte loop */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_scwirod
|
|
*
|
|
* Description: Sample the SCSI data bus making sure the signal has been
|
|
* deasserted for the correct number of consecutive samples.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_scwirod(u32 p_port, unsigned char p_data_bit)
|
|
{
|
|
unsigned char i;
|
|
|
|
i = 0;
|
|
while (i < MAX_SCSI_TAR) {
|
|
|
|
if (RD_HARPOON(p_port + hp_scsidata_0) & p_data_bit)
|
|
|
|
i = 0;
|
|
|
|
else
|
|
|
|
i++;
|
|
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_scwiros
|
|
*
|
|
* Description: Sample the SCSI Signal lines making sure the signal has been
|
|
* deasserted for the correct number of consecutive samples.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_scwiros(u32 p_port, unsigned char p_data_bit)
|
|
{
|
|
unsigned char i;
|
|
|
|
i = 0;
|
|
while (i < MAX_SCSI_TAR) {
|
|
|
|
if (RD_HARPOON(p_port + hp_scsisig) & p_data_bit)
|
|
|
|
i = 0;
|
|
|
|
else
|
|
|
|
i++;
|
|
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_scvalq
|
|
*
|
|
* Description: Make sure we received a valid data byte.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static unsigned char FPT_scvalq(unsigned char p_quintet)
|
|
{
|
|
unsigned char count;
|
|
|
|
for (count = 1; count < 0x08; count <<= 1) {
|
|
if (!(p_quintet & count))
|
|
p_quintet -= 0x80;
|
|
}
|
|
|
|
if (p_quintet & 0x18)
|
|
return 0;
|
|
|
|
else
|
|
return 1;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_scsell
|
|
*
|
|
* Description: Select the specified device ID using a selection timeout
|
|
* less than 4ms. If somebody responds then it is a legacy
|
|
* drive and this ID must be marked as such.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static unsigned char FPT_scsell(u32 p_port, unsigned char targ_id)
|
|
{
|
|
unsigned long i;
|
|
|
|
WR_HARPOON(p_port + hp_page_ctrl,
|
|
(RD_HARPOON(p_port + hp_page_ctrl) | G_INT_DISABLE));
|
|
|
|
ARAM_ACCESS(p_port);
|
|
|
|
WR_HARPOON(p_port + hp_addstat,
|
|
(RD_HARPOON(p_port + hp_addstat) | SCAM_TIMER));
|
|
WR_HARPOON(p_port + hp_seltimeout, TO_4ms);
|
|
|
|
for (i = p_port + CMD_STRT; i < p_port + CMD_STRT + 12; i += 2) {
|
|
WRW_HARPOON(i, (MPM_OP + ACOMMAND));
|
|
}
|
|
WRW_HARPOON(i, (BRH_OP + ALWAYS + NP));
|
|
|
|
WRW_HARPOON((p_port + hp_intstat),
|
|
(RESET | TIMEOUT | SEL | BUS_FREE | AUTO_INT));
|
|
|
|
WR_HARPOON(p_port + hp_select_id, targ_id);
|
|
|
|
WR_HARPOON(p_port + hp_portctrl_0, SCSI_PORT);
|
|
WR_HARPOON(p_port + hp_autostart_3, (SELECT | CMD_ONLY_STRT));
|
|
WR_HARPOON(p_port + hp_scsictrl_0, (SEL_TAR | ENA_RESEL));
|
|
|
|
while (!(RDW_HARPOON((p_port + hp_intstat)) &
|
|
(RESET | PROG_HLT | TIMEOUT | AUTO_INT))) {
|
|
}
|
|
|
|
if (RDW_HARPOON((p_port + hp_intstat)) & RESET)
|
|
FPT_Wait(p_port, TO_250ms);
|
|
|
|
DISABLE_AUTO(p_port);
|
|
|
|
WR_HARPOON(p_port + hp_addstat,
|
|
(RD_HARPOON(p_port + hp_addstat) & ~SCAM_TIMER));
|
|
WR_HARPOON(p_port + hp_seltimeout, TO_290ms);
|
|
|
|
SGRAM_ACCESS(p_port);
|
|
|
|
if (RDW_HARPOON((p_port + hp_intstat)) & (RESET | TIMEOUT)) {
|
|
|
|
WRW_HARPOON((p_port + hp_intstat),
|
|
(RESET | TIMEOUT | SEL | BUS_FREE | PHASE));
|
|
|
|
WR_HARPOON(p_port + hp_page_ctrl,
|
|
(RD_HARPOON(p_port + hp_page_ctrl) &
|
|
~G_INT_DISABLE));
|
|
|
|
return 0; /*No legacy device */
|
|
}
|
|
|
|
else {
|
|
|
|
while (!(RDW_HARPOON((p_port + hp_intstat)) & BUS_FREE)) {
|
|
if (RD_HARPOON(p_port + hp_scsisig) & SCSI_REQ) {
|
|
WR_HARPOON(p_port + hp_scsisig,
|
|
(SCSI_ACK + S_ILL_PH));
|
|
ACCEPT_MSG(p_port);
|
|
}
|
|
}
|
|
|
|
WRW_HARPOON((p_port + hp_intstat), CLR_ALL_INT_1);
|
|
|
|
WR_HARPOON(p_port + hp_page_ctrl,
|
|
(RD_HARPOON(p_port + hp_page_ctrl) &
|
|
~G_INT_DISABLE));
|
|
|
|
return 1; /*Found one of them oldies! */
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_scwtsel
|
|
*
|
|
* Description: Wait to be selected by another SCAM initiator.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_scwtsel(u32 p_port)
|
|
{
|
|
while (!(RDW_HARPOON((p_port + hp_intstat)) & SCAM_SEL)) {
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_inisci
|
|
*
|
|
* Description: Setup the data Structure with the info from the EEPROM.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_inisci(unsigned char p_card, u32 p_port, unsigned char p_our_id)
|
|
{
|
|
unsigned char i, k, max_id;
|
|
unsigned short ee_data;
|
|
struct nvram_info *pCurrNvRam;
|
|
|
|
pCurrNvRam = FPT_BL_Card[p_card].pNvRamInfo;
|
|
|
|
if (RD_HARPOON(p_port + hp_page_ctrl) & NARROW_SCSI_CARD)
|
|
max_id = 0x08;
|
|
|
|
else
|
|
max_id = 0x10;
|
|
|
|
if (pCurrNvRam) {
|
|
for (i = 0; i < max_id; i++) {
|
|
|
|
for (k = 0; k < 4; k++)
|
|
FPT_scamInfo[i].id_string[k] =
|
|
pCurrNvRam->niScamTbl[i][k];
|
|
for (k = 4; k < ID_STRING_LENGTH; k++)
|
|
FPT_scamInfo[i].id_string[k] =
|
|
(unsigned char)0x00;
|
|
|
|
if (FPT_scamInfo[i].id_string[0] == 0x00)
|
|
FPT_scamInfo[i].state = ID_UNUSED; /*Default to unused ID. */
|
|
else
|
|
FPT_scamInfo[i].state = ID_UNASSIGNED; /*Default to unassigned ID. */
|
|
|
|
}
|
|
} else {
|
|
for (i = 0; i < max_id; i++) {
|
|
for (k = 0; k < ID_STRING_LENGTH; k += 2) {
|
|
ee_data =
|
|
FPT_utilEERead(p_port,
|
|
(unsigned
|
|
short)((EE_SCAMBASE / 2) +
|
|
(unsigned short)(i *
|
|
((unsigned short)ID_STRING_LENGTH / 2)) + (unsigned short)(k / 2)));
|
|
FPT_scamInfo[i].id_string[k] =
|
|
(unsigned char)ee_data;
|
|
ee_data >>= 8;
|
|
FPT_scamInfo[i].id_string[k + 1] =
|
|
(unsigned char)ee_data;
|
|
}
|
|
|
|
if ((FPT_scamInfo[i].id_string[0] == 0x00) ||
|
|
(FPT_scamInfo[i].id_string[0] == 0xFF))
|
|
|
|
FPT_scamInfo[i].state = ID_UNUSED; /*Default to unused ID. */
|
|
|
|
else
|
|
FPT_scamInfo[i].state = ID_UNASSIGNED; /*Default to unassigned ID. */
|
|
|
|
}
|
|
}
|
|
for (k = 0; k < ID_STRING_LENGTH; k++)
|
|
FPT_scamInfo[p_our_id].id_string[k] = FPT_scamHAString[k];
|
|
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_scmachid
|
|
*
|
|
* Description: Match the Device ID string with our values stored in
|
|
* the EEPROM.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static unsigned char FPT_scmachid(unsigned char p_card,
|
|
unsigned char p_id_string[])
|
|
{
|
|
|
|
unsigned char i, k, match;
|
|
|
|
for (i = 0; i < MAX_SCSI_TAR; i++) {
|
|
|
|
match = 1;
|
|
|
|
for (k = 0; k < ID_STRING_LENGTH; k++) {
|
|
if (p_id_string[k] != FPT_scamInfo[i].id_string[k])
|
|
match = 0;
|
|
}
|
|
|
|
if (match) {
|
|
FPT_scamInfo[i].state = ID_ASSIGNED;
|
|
return i;
|
|
}
|
|
|
|
}
|
|
|
|
if (p_id_string[0] & BIT(5))
|
|
i = 8;
|
|
else
|
|
i = MAX_SCSI_TAR;
|
|
|
|
if (((p_id_string[0] & 0x06) == 0x02)
|
|
|| ((p_id_string[0] & 0x06) == 0x04))
|
|
match = p_id_string[1] & (unsigned char)0x1F;
|
|
else
|
|
match = 7;
|
|
|
|
while (i > 0) {
|
|
i--;
|
|
|
|
if (FPT_scamInfo[match].state == ID_UNUSED) {
|
|
for (k = 0; k < ID_STRING_LENGTH; k++) {
|
|
FPT_scamInfo[match].id_string[k] =
|
|
p_id_string[k];
|
|
}
|
|
|
|
FPT_scamInfo[match].state = ID_ASSIGNED;
|
|
|
|
if (FPT_BL_Card[p_card].pNvRamInfo == NULL)
|
|
FPT_BL_Card[p_card].globalFlags |=
|
|
F_UPDATE_EEPROM;
|
|
return match;
|
|
|
|
}
|
|
|
|
match--;
|
|
|
|
if (match == 0xFF) {
|
|
if (p_id_string[0] & BIT(5))
|
|
match = 7;
|
|
else
|
|
match = MAX_SCSI_TAR - 1;
|
|
}
|
|
}
|
|
|
|
if (p_id_string[0] & BIT(7)) {
|
|
return CLR_PRIORITY;
|
|
}
|
|
|
|
if (p_id_string[0] & BIT(5))
|
|
i = 8;
|
|
else
|
|
i = MAX_SCSI_TAR;
|
|
|
|
if (((p_id_string[0] & 0x06) == 0x02)
|
|
|| ((p_id_string[0] & 0x06) == 0x04))
|
|
match = p_id_string[1] & (unsigned char)0x1F;
|
|
else
|
|
match = 7;
|
|
|
|
while (i > 0) {
|
|
|
|
i--;
|
|
|
|
if (FPT_scamInfo[match].state == ID_UNASSIGNED) {
|
|
for (k = 0; k < ID_STRING_LENGTH; k++) {
|
|
FPT_scamInfo[match].id_string[k] =
|
|
p_id_string[k];
|
|
}
|
|
|
|
FPT_scamInfo[match].id_string[0] |= BIT(7);
|
|
FPT_scamInfo[match].state = ID_ASSIGNED;
|
|
if (FPT_BL_Card[p_card].pNvRamInfo == NULL)
|
|
FPT_BL_Card[p_card].globalFlags |=
|
|
F_UPDATE_EEPROM;
|
|
return match;
|
|
|
|
}
|
|
|
|
match--;
|
|
|
|
if (match == 0xFF) {
|
|
if (p_id_string[0] & BIT(5))
|
|
match = 7;
|
|
else
|
|
match = MAX_SCSI_TAR - 1;
|
|
}
|
|
}
|
|
|
|
return NO_ID_AVAIL;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_scsavdi
|
|
*
|
|
* Description: Save off the device SCAM ID strings.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_scsavdi(unsigned char p_card, u32 p_port)
|
|
{
|
|
unsigned char i, k, max_id;
|
|
unsigned short ee_data, sum_data;
|
|
|
|
sum_data = 0x0000;
|
|
|
|
for (i = 1; i < EE_SCAMBASE / 2; i++) {
|
|
sum_data += FPT_utilEERead(p_port, i);
|
|
}
|
|
|
|
FPT_utilEEWriteOnOff(p_port, 1); /* Enable write access to the EEPROM */
|
|
|
|
if (RD_HARPOON(p_port + hp_page_ctrl) & NARROW_SCSI_CARD)
|
|
max_id = 0x08;
|
|
|
|
else
|
|
max_id = 0x10;
|
|
|
|
for (i = 0; i < max_id; i++) {
|
|
|
|
for (k = 0; k < ID_STRING_LENGTH; k += 2) {
|
|
ee_data = FPT_scamInfo[i].id_string[k + 1];
|
|
ee_data <<= 8;
|
|
ee_data |= FPT_scamInfo[i].id_string[k];
|
|
sum_data += ee_data;
|
|
FPT_utilEEWrite(p_port, ee_data,
|
|
(unsigned short)((EE_SCAMBASE / 2) +
|
|
(unsigned short)(i *
|
|
((unsigned short)ID_STRING_LENGTH / 2)) + (unsigned short)(k / 2)));
|
|
}
|
|
}
|
|
|
|
FPT_utilEEWrite(p_port, sum_data, EEPROM_CHECK_SUM / 2);
|
|
FPT_utilEEWriteOnOff(p_port, 0); /* Turn off write access */
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_XbowInit
|
|
*
|
|
* Description: Setup the Xbow for normal operation.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_XbowInit(u32 port, unsigned char ScamFlg)
|
|
{
|
|
unsigned char i;
|
|
|
|
i = RD_HARPOON(port + hp_page_ctrl);
|
|
WR_HARPOON(port + hp_page_ctrl, (unsigned char)(i | G_INT_DISABLE));
|
|
|
|
WR_HARPOON(port + hp_scsireset, 0x00);
|
|
WR_HARPOON(port + hp_portctrl_1, HOST_MODE8);
|
|
|
|
WR_HARPOON(port + hp_scsireset, (DMA_RESET | HPSCSI_RESET | PROG_RESET |
|
|
FIFO_CLR));
|
|
|
|
WR_HARPOON(port + hp_scsireset, SCSI_INI);
|
|
|
|
WR_HARPOON(port + hp_clkctrl_0, CLKCTRL_DEFAULT);
|
|
|
|
WR_HARPOON(port + hp_scsisig, 0x00); /* Clear any signals we might */
|
|
WR_HARPOON(port + hp_scsictrl_0, ENA_SCAM_SEL);
|
|
|
|
WRW_HARPOON((port + hp_intstat), CLR_ALL_INT);
|
|
|
|
FPT_default_intena = RESET | RSEL | PROG_HLT | TIMEOUT |
|
|
BUS_FREE | XFER_CNT_0 | AUTO_INT;
|
|
|
|
if ((ScamFlg & SCAM_ENABLED) && (ScamFlg & SCAM_LEVEL2))
|
|
FPT_default_intena |= SCAM_SEL;
|
|
|
|
WRW_HARPOON((port + hp_intena), FPT_default_intena);
|
|
|
|
WR_HARPOON(port + hp_seltimeout, TO_290ms);
|
|
|
|
/* Turn on SCSI_MODE8 for narrow cards to fix the
|
|
strapping issue with the DUAL CHANNEL card */
|
|
if (RD_HARPOON(port + hp_page_ctrl) & NARROW_SCSI_CARD)
|
|
WR_HARPOON(port + hp_addstat, SCSI_MODE8);
|
|
|
|
WR_HARPOON(port + hp_page_ctrl, i);
|
|
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_BusMasterInit
|
|
*
|
|
* Description: Initialize the BusMaster for normal operations.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_BusMasterInit(u32 p_port)
|
|
{
|
|
|
|
WR_HARPOON(p_port + hp_sys_ctrl, DRVR_RST);
|
|
WR_HARPOON(p_port + hp_sys_ctrl, 0x00);
|
|
|
|
WR_HARPOON(p_port + hp_host_blk_cnt, XFER_BLK64);
|
|
|
|
WR_HARPOON(p_port + hp_bm_ctrl, (BMCTRL_DEFAULT));
|
|
|
|
WR_HARPOON(p_port + hp_ee_ctrl, (SCSI_TERM_ENA_H));
|
|
|
|
RD_HARPOON(p_port + hp_int_status); /*Clear interrupts. */
|
|
WR_HARPOON(p_port + hp_int_mask, (INT_CMD_COMPL | SCSI_INTERRUPT));
|
|
WR_HARPOON(p_port + hp_page_ctrl, (RD_HARPOON(p_port + hp_page_ctrl) &
|
|
~SCATTER_EN));
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_DiagEEPROM
|
|
*
|
|
* Description: Verfiy checksum and 'Key' and initialize the EEPROM if
|
|
* necessary.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_DiagEEPROM(u32 p_port)
|
|
{
|
|
unsigned short index, temp, max_wd_cnt;
|
|
|
|
if (RD_HARPOON(p_port + hp_page_ctrl) & NARROW_SCSI_CARD)
|
|
max_wd_cnt = EEPROM_WD_CNT;
|
|
else
|
|
max_wd_cnt = EEPROM_WD_CNT * 2;
|
|
|
|
temp = FPT_utilEERead(p_port, FW_SIGNATURE / 2);
|
|
|
|
if (temp == 0x4641) {
|
|
|
|
for (index = 2; index < max_wd_cnt; index++) {
|
|
|
|
temp += FPT_utilEERead(p_port, index);
|
|
|
|
}
|
|
|
|
if (temp == FPT_utilEERead(p_port, EEPROM_CHECK_SUM / 2)) {
|
|
|
|
return; /*EEPROM is Okay so return now! */
|
|
}
|
|
}
|
|
|
|
FPT_utilEEWriteOnOff(p_port, (unsigned char)1);
|
|
|
|
for (index = 0; index < max_wd_cnt; index++) {
|
|
|
|
FPT_utilEEWrite(p_port, 0x0000, index);
|
|
}
|
|
|
|
temp = 0;
|
|
|
|
FPT_utilEEWrite(p_port, 0x4641, FW_SIGNATURE / 2);
|
|
temp += 0x4641;
|
|
FPT_utilEEWrite(p_port, 0x3920, MODEL_NUMB_0 / 2);
|
|
temp += 0x3920;
|
|
FPT_utilEEWrite(p_port, 0x3033, MODEL_NUMB_2 / 2);
|
|
temp += 0x3033;
|
|
FPT_utilEEWrite(p_port, 0x2020, MODEL_NUMB_4 / 2);
|
|
temp += 0x2020;
|
|
FPT_utilEEWrite(p_port, 0x70D3, SYSTEM_CONFIG / 2);
|
|
temp += 0x70D3;
|
|
FPT_utilEEWrite(p_port, 0x0010, BIOS_CONFIG / 2);
|
|
temp += 0x0010;
|
|
FPT_utilEEWrite(p_port, 0x0003, SCAM_CONFIG / 2);
|
|
temp += 0x0003;
|
|
FPT_utilEEWrite(p_port, 0x0007, ADAPTER_SCSI_ID / 2);
|
|
temp += 0x0007;
|
|
|
|
FPT_utilEEWrite(p_port, 0x0000, IGNORE_B_SCAN / 2);
|
|
temp += 0x0000;
|
|
FPT_utilEEWrite(p_port, 0x0000, SEND_START_ENA / 2);
|
|
temp += 0x0000;
|
|
FPT_utilEEWrite(p_port, 0x0000, DEVICE_ENABLE / 2);
|
|
temp += 0x0000;
|
|
|
|
FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBL01 / 2);
|
|
temp += 0x4242;
|
|
FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBL23 / 2);
|
|
temp += 0x4242;
|
|
FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBL45 / 2);
|
|
temp += 0x4242;
|
|
FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBL67 / 2);
|
|
temp += 0x4242;
|
|
FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBL89 / 2);
|
|
temp += 0x4242;
|
|
FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBLab / 2);
|
|
temp += 0x4242;
|
|
FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBLcd / 2);
|
|
temp += 0x4242;
|
|
FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBLef / 2);
|
|
temp += 0x4242;
|
|
|
|
FPT_utilEEWrite(p_port, 0x6C46, 64 / 2); /*PRODUCT ID */
|
|
temp += 0x6C46;
|
|
FPT_utilEEWrite(p_port, 0x7361, 66 / 2); /* FlashPoint LT */
|
|
temp += 0x7361;
|
|
FPT_utilEEWrite(p_port, 0x5068, 68 / 2);
|
|
temp += 0x5068;
|
|
FPT_utilEEWrite(p_port, 0x696F, 70 / 2);
|
|
temp += 0x696F;
|
|
FPT_utilEEWrite(p_port, 0x746E, 72 / 2);
|
|
temp += 0x746E;
|
|
FPT_utilEEWrite(p_port, 0x4C20, 74 / 2);
|
|
temp += 0x4C20;
|
|
FPT_utilEEWrite(p_port, 0x2054, 76 / 2);
|
|
temp += 0x2054;
|
|
FPT_utilEEWrite(p_port, 0x2020, 78 / 2);
|
|
temp += 0x2020;
|
|
|
|
index = ((EE_SCAMBASE / 2) + (7 * 16));
|
|
FPT_utilEEWrite(p_port, (0x0700 + TYPE_CODE0), index);
|
|
temp += (0x0700 + TYPE_CODE0);
|
|
index++;
|
|
FPT_utilEEWrite(p_port, 0x5542, index); /*Vendor ID code */
|
|
temp += 0x5542; /* BUSLOGIC */
|
|
index++;
|
|
FPT_utilEEWrite(p_port, 0x4C53, index);
|
|
temp += 0x4C53;
|
|
index++;
|
|
FPT_utilEEWrite(p_port, 0x474F, index);
|
|
temp += 0x474F;
|
|
index++;
|
|
FPT_utilEEWrite(p_port, 0x4349, index);
|
|
temp += 0x4349;
|
|
index++;
|
|
FPT_utilEEWrite(p_port, 0x5442, index); /*Vendor unique code */
|
|
temp += 0x5442; /* BT- 930 */
|
|
index++;
|
|
FPT_utilEEWrite(p_port, 0x202D, index);
|
|
temp += 0x202D;
|
|
index++;
|
|
FPT_utilEEWrite(p_port, 0x3339, index);
|
|
temp += 0x3339;
|
|
index++; /*Serial # */
|
|
FPT_utilEEWrite(p_port, 0x2030, index); /* 01234567 */
|
|
temp += 0x2030;
|
|
index++;
|
|
FPT_utilEEWrite(p_port, 0x5453, index);
|
|
temp += 0x5453;
|
|
index++;
|
|
FPT_utilEEWrite(p_port, 0x5645, index);
|
|
temp += 0x5645;
|
|
index++;
|
|
FPT_utilEEWrite(p_port, 0x2045, index);
|
|
temp += 0x2045;
|
|
index++;
|
|
FPT_utilEEWrite(p_port, 0x202F, index);
|
|
temp += 0x202F;
|
|
index++;
|
|
FPT_utilEEWrite(p_port, 0x4F4A, index);
|
|
temp += 0x4F4A;
|
|
index++;
|
|
FPT_utilEEWrite(p_port, 0x204E, index);
|
|
temp += 0x204E;
|
|
index++;
|
|
FPT_utilEEWrite(p_port, 0x3539, index);
|
|
temp += 0x3539;
|
|
|
|
FPT_utilEEWrite(p_port, temp, EEPROM_CHECK_SUM / 2);
|
|
|
|
FPT_utilEEWriteOnOff(p_port, (unsigned char)0);
|
|
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Queue Search Select
|
|
*
|
|
* Description: Try to find a new command to execute.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_queueSearchSelect(struct sccb_card *pCurrCard,
|
|
unsigned char p_card)
|
|
{
|
|
unsigned char scan_ptr, lun;
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
struct sccb *pOldSccb;
|
|
|
|
scan_ptr = pCurrCard->scanIndex;
|
|
do {
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][scan_ptr];
|
|
if ((pCurrCard->globalFlags & F_CONLUN_IO) &&
|
|
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) !=
|
|
TAG_Q_TRYING)) {
|
|
if (currTar_Info->TarSelQ_Cnt != 0) {
|
|
|
|
scan_ptr++;
|
|
if (scan_ptr == MAX_SCSI_TAR)
|
|
scan_ptr = 0;
|
|
|
|
for (lun = 0; lun < MAX_LUN; lun++) {
|
|
if (currTar_Info->TarLUNBusy[lun] == 0) {
|
|
|
|
pCurrCard->currentSCCB =
|
|
currTar_Info->TarSelQ_Head;
|
|
pOldSccb = NULL;
|
|
|
|
while ((pCurrCard->
|
|
currentSCCB != NULL)
|
|
&& (lun !=
|
|
pCurrCard->
|
|
currentSCCB->Lun)) {
|
|
pOldSccb =
|
|
pCurrCard->
|
|
currentSCCB;
|
|
pCurrCard->currentSCCB =
|
|
(struct sccb
|
|
*)(pCurrCard->
|
|
currentSCCB)->
|
|
Sccb_forwardlink;
|
|
}
|
|
if (pCurrCard->currentSCCB ==
|
|
NULL)
|
|
continue;
|
|
if (pOldSccb != NULL) {
|
|
pOldSccb->
|
|
Sccb_forwardlink =
|
|
(struct sccb
|
|
*)(pCurrCard->
|
|
currentSCCB)->
|
|
Sccb_forwardlink;
|
|
pOldSccb->
|
|
Sccb_backlink =
|
|
(struct sccb
|
|
*)(pCurrCard->
|
|
currentSCCB)->
|
|
Sccb_backlink;
|
|
currTar_Info->
|
|
TarSelQ_Cnt--;
|
|
} else {
|
|
currTar_Info->
|
|
TarSelQ_Head =
|
|
(struct sccb
|
|
*)(pCurrCard->
|
|
currentSCCB)->
|
|
Sccb_forwardlink;
|
|
|
|
if (currTar_Info->
|
|
TarSelQ_Head ==
|
|
NULL) {
|
|
currTar_Info->
|
|
TarSelQ_Tail
|
|
= NULL;
|
|
currTar_Info->
|
|
TarSelQ_Cnt
|
|
= 0;
|
|
} else {
|
|
currTar_Info->
|
|
TarSelQ_Cnt--;
|
|
currTar_Info->
|
|
TarSelQ_Head->
|
|
Sccb_backlink
|
|
=
|
|
(struct sccb
|
|
*)NULL;
|
|
}
|
|
}
|
|
pCurrCard->scanIndex = scan_ptr;
|
|
|
|
pCurrCard->globalFlags |=
|
|
F_NEW_SCCB_CMD;
|
|
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
else {
|
|
scan_ptr++;
|
|
if (scan_ptr == MAX_SCSI_TAR) {
|
|
scan_ptr = 0;
|
|
}
|
|
}
|
|
|
|
} else {
|
|
if ((currTar_Info->TarSelQ_Cnt != 0) &&
|
|
(currTar_Info->TarLUNBusy[0] == 0)) {
|
|
|
|
pCurrCard->currentSCCB =
|
|
currTar_Info->TarSelQ_Head;
|
|
|
|
currTar_Info->TarSelQ_Head =
|
|
(struct sccb *)(pCurrCard->currentSCCB)->
|
|
Sccb_forwardlink;
|
|
|
|
if (currTar_Info->TarSelQ_Head == NULL) {
|
|
currTar_Info->TarSelQ_Tail = NULL;
|
|
currTar_Info->TarSelQ_Cnt = 0;
|
|
} else {
|
|
currTar_Info->TarSelQ_Cnt--;
|
|
currTar_Info->TarSelQ_Head->
|
|
Sccb_backlink = (struct sccb *)NULL;
|
|
}
|
|
|
|
scan_ptr++;
|
|
if (scan_ptr == MAX_SCSI_TAR)
|
|
scan_ptr = 0;
|
|
|
|
pCurrCard->scanIndex = scan_ptr;
|
|
|
|
pCurrCard->globalFlags |= F_NEW_SCCB_CMD;
|
|
|
|
break;
|
|
}
|
|
|
|
else {
|
|
scan_ptr++;
|
|
if (scan_ptr == MAX_SCSI_TAR) {
|
|
scan_ptr = 0;
|
|
}
|
|
}
|
|
}
|
|
} while (scan_ptr != pCurrCard->scanIndex);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Queue Select Fail
|
|
*
|
|
* Description: Add the current SCCB to the head of the Queue.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_queueSelectFail(struct sccb_card *pCurrCard,
|
|
unsigned char p_card)
|
|
{
|
|
unsigned char thisTarg;
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
|
|
if (pCurrCard->currentSCCB != NULL) {
|
|
thisTarg =
|
|
(unsigned char)(((struct sccb *)(pCurrCard->currentSCCB))->
|
|
TargID);
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][thisTarg];
|
|
|
|
pCurrCard->currentSCCB->Sccb_backlink = (struct sccb *)NULL;
|
|
|
|
pCurrCard->currentSCCB->Sccb_forwardlink =
|
|
currTar_Info->TarSelQ_Head;
|
|
|
|
if (currTar_Info->TarSelQ_Cnt == 0) {
|
|
currTar_Info->TarSelQ_Tail = pCurrCard->currentSCCB;
|
|
}
|
|
|
|
else {
|
|
currTar_Info->TarSelQ_Head->Sccb_backlink =
|
|
pCurrCard->currentSCCB;
|
|
}
|
|
|
|
currTar_Info->TarSelQ_Head = pCurrCard->currentSCCB;
|
|
|
|
pCurrCard->currentSCCB = NULL;
|
|
currTar_Info->TarSelQ_Cnt++;
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Queue Command Complete
|
|
*
|
|
* Description: Call the callback function with the current SCCB.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_queueCmdComplete(struct sccb_card *pCurrCard,
|
|
struct sccb *p_sccb, unsigned char p_card)
|
|
{
|
|
|
|
unsigned char i, SCSIcmd;
|
|
CALL_BK_FN callback;
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
|
|
SCSIcmd = p_sccb->Cdb[0];
|
|
|
|
if (!(p_sccb->Sccb_XferState & F_ALL_XFERRED)) {
|
|
|
|
if ((p_sccb->
|
|
ControlByte & (SCCB_DATA_XFER_OUT | SCCB_DATA_XFER_IN))
|
|
&& (p_sccb->HostStatus == SCCB_COMPLETE)
|
|
&& (p_sccb->TargetStatus != SSCHECK))
|
|
|
|
if ((SCSIcmd == SCSI_READ) ||
|
|
(SCSIcmd == SCSI_WRITE) ||
|
|
(SCSIcmd == SCSI_READ_EXTENDED) ||
|
|
(SCSIcmd == SCSI_WRITE_EXTENDED) ||
|
|
(SCSIcmd == SCSI_WRITE_AND_VERIFY) ||
|
|
(SCSIcmd == SCSI_START_STOP_UNIT) ||
|
|
(pCurrCard->globalFlags & F_NO_FILTER)
|
|
)
|
|
p_sccb->HostStatus = SCCB_DATA_UNDER_RUN;
|
|
}
|
|
|
|
if (p_sccb->SccbStatus == SCCB_IN_PROCESS) {
|
|
if (p_sccb->HostStatus || p_sccb->TargetStatus)
|
|
p_sccb->SccbStatus = SCCB_ERROR;
|
|
else
|
|
p_sccb->SccbStatus = SCCB_SUCCESS;
|
|
}
|
|
|
|
if (p_sccb->Sccb_XferState & F_AUTO_SENSE) {
|
|
|
|
p_sccb->CdbLength = p_sccb->Save_CdbLen;
|
|
for (i = 0; i < 6; i++) {
|
|
p_sccb->Cdb[i] = p_sccb->Save_Cdb[i];
|
|
}
|
|
}
|
|
|
|
if ((p_sccb->OperationCode == RESIDUAL_SG_COMMAND) ||
|
|
(p_sccb->OperationCode == RESIDUAL_COMMAND)) {
|
|
|
|
FPT_utilUpdateResidual(p_sccb);
|
|
}
|
|
|
|
pCurrCard->cmdCounter--;
|
|
if (!pCurrCard->cmdCounter) {
|
|
|
|
if (pCurrCard->globalFlags & F_GREEN_PC) {
|
|
WR_HARPOON(pCurrCard->ioPort + hp_clkctrl_0,
|
|
(PWR_DWN | CLKCTRL_DEFAULT));
|
|
WR_HARPOON(pCurrCard->ioPort + hp_sys_ctrl, STOP_CLK);
|
|
}
|
|
|
|
WR_HARPOON(pCurrCard->ioPort + hp_semaphore,
|
|
(RD_HARPOON(pCurrCard->ioPort + hp_semaphore) &
|
|
~SCCB_MGR_ACTIVE));
|
|
|
|
}
|
|
|
|
if (pCurrCard->discQCount != 0) {
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][p_sccb->TargID];
|
|
if (((pCurrCard->globalFlags & F_CONLUN_IO) &&
|
|
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) !=
|
|
TAG_Q_TRYING))) {
|
|
pCurrCard->discQCount--;
|
|
pCurrCard->discQ_Tbl[currTar_Info->
|
|
LunDiscQ_Idx[p_sccb->Lun]] = NULL;
|
|
} else {
|
|
if (p_sccb->Sccb_tag) {
|
|
pCurrCard->discQCount--;
|
|
pCurrCard->discQ_Tbl[p_sccb->Sccb_tag] = NULL;
|
|
} else {
|
|
pCurrCard->discQCount--;
|
|
pCurrCard->discQ_Tbl[currTar_Info->
|
|
LunDiscQ_Idx[0]] = NULL;
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
callback = (CALL_BK_FN) p_sccb->SccbCallback;
|
|
callback(p_sccb);
|
|
pCurrCard->globalFlags |= F_NEW_SCCB_CMD;
|
|
pCurrCard->currentSCCB = NULL;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Queue Disconnect
|
|
*
|
|
* Description: Add SCCB to our disconnect array.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static void FPT_queueDisconnect(struct sccb *p_sccb, unsigned char p_card)
|
|
{
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][p_sccb->TargID];
|
|
|
|
if (((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
|
|
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))) {
|
|
FPT_BL_Card[p_card].discQ_Tbl[currTar_Info->
|
|
LunDiscQ_Idx[p_sccb->Lun]] =
|
|
p_sccb;
|
|
} else {
|
|
if (p_sccb->Sccb_tag) {
|
|
FPT_BL_Card[p_card].discQ_Tbl[p_sccb->Sccb_tag] =
|
|
p_sccb;
|
|
FPT_sccbMgrTbl[p_card][p_sccb->TargID].TarLUNBusy[0] =
|
|
0;
|
|
FPT_sccbMgrTbl[p_card][p_sccb->TargID].TarTagQ_Cnt++;
|
|
} else {
|
|
FPT_BL_Card[p_card].discQ_Tbl[currTar_Info->
|
|
LunDiscQ_Idx[0]] = p_sccb;
|
|
}
|
|
}
|
|
FPT_BL_Card[p_card].currentSCCB = NULL;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Queue Flush SCCB
|
|
*
|
|
* Description: Flush all SCCB's back to the host driver for this target.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_queueFlushSccb(unsigned char p_card, unsigned char error_code)
|
|
{
|
|
unsigned char qtag, thisTarg;
|
|
struct sccb *currSCCB;
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
|
|
currSCCB = FPT_BL_Card[p_card].currentSCCB;
|
|
if (currSCCB != NULL) {
|
|
thisTarg = (unsigned char)currSCCB->TargID;
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][thisTarg];
|
|
|
|
for (qtag = 0; qtag < QUEUE_DEPTH; qtag++) {
|
|
|
|
if (FPT_BL_Card[p_card].discQ_Tbl[qtag] &&
|
|
(FPT_BL_Card[p_card].discQ_Tbl[qtag]->TargID ==
|
|
thisTarg)) {
|
|
|
|
FPT_BL_Card[p_card].discQ_Tbl[qtag]->
|
|
HostStatus = (unsigned char)error_code;
|
|
|
|
FPT_queueCmdComplete(&FPT_BL_Card[p_card],
|
|
FPT_BL_Card[p_card].
|
|
discQ_Tbl[qtag], p_card);
|
|
|
|
FPT_BL_Card[p_card].discQ_Tbl[qtag] = NULL;
|
|
currTar_Info->TarTagQ_Cnt--;
|
|
|
|
}
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Queue Flush Target SCCB
|
|
*
|
|
* Description: Flush all SCCB's back to the host driver for this target.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_queueFlushTargSccb(unsigned char p_card, unsigned char thisTarg,
|
|
unsigned char error_code)
|
|
{
|
|
unsigned char qtag;
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][thisTarg];
|
|
|
|
for (qtag = 0; qtag < QUEUE_DEPTH; qtag++) {
|
|
|
|
if (FPT_BL_Card[p_card].discQ_Tbl[qtag] &&
|
|
(FPT_BL_Card[p_card].discQ_Tbl[qtag]->TargID == thisTarg)) {
|
|
|
|
FPT_BL_Card[p_card].discQ_Tbl[qtag]->HostStatus =
|
|
(unsigned char)error_code;
|
|
|
|
FPT_queueCmdComplete(&FPT_BL_Card[p_card],
|
|
FPT_BL_Card[p_card].
|
|
discQ_Tbl[qtag], p_card);
|
|
|
|
FPT_BL_Card[p_card].discQ_Tbl[qtag] = NULL;
|
|
currTar_Info->TarTagQ_Cnt--;
|
|
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
static void FPT_queueAddSccb(struct sccb *p_SCCB, unsigned char p_card)
|
|
{
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][p_SCCB->TargID];
|
|
|
|
p_SCCB->Sccb_forwardlink = NULL;
|
|
|
|
p_SCCB->Sccb_backlink = currTar_Info->TarSelQ_Tail;
|
|
|
|
if (currTar_Info->TarSelQ_Cnt == 0) {
|
|
|
|
currTar_Info->TarSelQ_Head = p_SCCB;
|
|
}
|
|
|
|
else {
|
|
|
|
currTar_Info->TarSelQ_Tail->Sccb_forwardlink = p_SCCB;
|
|
}
|
|
|
|
currTar_Info->TarSelQ_Tail = p_SCCB;
|
|
currTar_Info->TarSelQ_Cnt++;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Queue Find SCCB
|
|
*
|
|
* Description: Search the target select Queue for this SCCB, and
|
|
* remove it if found.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static unsigned char FPT_queueFindSccb(struct sccb *p_SCCB,
|
|
unsigned char p_card)
|
|
{
|
|
struct sccb *q_ptr;
|
|
struct sccb_mgr_tar_info *currTar_Info;
|
|
|
|
currTar_Info = &FPT_sccbMgrTbl[p_card][p_SCCB->TargID];
|
|
|
|
q_ptr = currTar_Info->TarSelQ_Head;
|
|
|
|
while (q_ptr != NULL) {
|
|
|
|
if (q_ptr == p_SCCB) {
|
|
|
|
if (currTar_Info->TarSelQ_Head == q_ptr) {
|
|
|
|
currTar_Info->TarSelQ_Head =
|
|
q_ptr->Sccb_forwardlink;
|
|
}
|
|
|
|
if (currTar_Info->TarSelQ_Tail == q_ptr) {
|
|
|
|
currTar_Info->TarSelQ_Tail =
|
|
q_ptr->Sccb_backlink;
|
|
}
|
|
|
|
if (q_ptr->Sccb_forwardlink != NULL) {
|
|
q_ptr->Sccb_forwardlink->Sccb_backlink =
|
|
q_ptr->Sccb_backlink;
|
|
}
|
|
|
|
if (q_ptr->Sccb_backlink != NULL) {
|
|
q_ptr->Sccb_backlink->Sccb_forwardlink =
|
|
q_ptr->Sccb_forwardlink;
|
|
}
|
|
|
|
currTar_Info->TarSelQ_Cnt--;
|
|
|
|
return 1;
|
|
}
|
|
|
|
else {
|
|
q_ptr = q_ptr->Sccb_forwardlink;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Utility Update Residual Count
|
|
*
|
|
* Description: Update the XferCnt to the remaining byte count.
|
|
* If we transferred all the data then just write zero.
|
|
* If Non-SG transfer then report Total Cnt - Actual Transfer
|
|
* Cnt. For SG transfers add the count fields of all
|
|
* remaining SG elements, as well as any partial remaining
|
|
* element.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_utilUpdateResidual(struct sccb *p_SCCB)
|
|
{
|
|
unsigned long partial_cnt;
|
|
unsigned int sg_index;
|
|
struct blogic_sg_seg *segp;
|
|
|
|
if (p_SCCB->Sccb_XferState & F_ALL_XFERRED) {
|
|
|
|
p_SCCB->DataLength = 0x0000;
|
|
}
|
|
|
|
else if (p_SCCB->Sccb_XferState & F_SG_XFER) {
|
|
|
|
partial_cnt = 0x0000;
|
|
|
|
sg_index = p_SCCB->Sccb_sgseg;
|
|
|
|
|
|
if (p_SCCB->Sccb_SGoffset) {
|
|
|
|
partial_cnt = p_SCCB->Sccb_SGoffset;
|
|
sg_index++;
|
|
}
|
|
|
|
while (((unsigned long)sg_index *
|
|
(unsigned long)SG_ELEMENT_SIZE) < p_SCCB->DataLength) {
|
|
segp = (struct blogic_sg_seg *)(p_SCCB->DataPointer) +
|
|
(sg_index * 2);
|
|
partial_cnt += segp->segbytes;
|
|
sg_index++;
|
|
}
|
|
|
|
p_SCCB->DataLength = partial_cnt;
|
|
}
|
|
|
|
else {
|
|
|
|
p_SCCB->DataLength -= p_SCCB->Sccb_ATC;
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Wait 1 Second
|
|
*
|
|
* Description: Wait for 1 second.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_Wait1Second(u32 p_port)
|
|
{
|
|
unsigned char i;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
|
|
FPT_Wait(p_port, TO_250ms);
|
|
|
|
if ((RD_HARPOON(p_port + hp_scsictrl_0) & SCSI_RST))
|
|
break;
|
|
|
|
if ((RDW_HARPOON((p_port + hp_intstat)) & SCAM_SEL))
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: FPT_Wait
|
|
*
|
|
* Description: Wait the desired delay.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_Wait(u32 p_port, unsigned char p_delay)
|
|
{
|
|
unsigned char old_timer;
|
|
unsigned char green_flag;
|
|
|
|
old_timer = RD_HARPOON(p_port + hp_seltimeout);
|
|
|
|
green_flag = RD_HARPOON(p_port + hp_clkctrl_0);
|
|
WR_HARPOON(p_port + hp_clkctrl_0, CLKCTRL_DEFAULT);
|
|
|
|
WR_HARPOON(p_port + hp_seltimeout, p_delay);
|
|
WRW_HARPOON((p_port + hp_intstat), TIMEOUT);
|
|
WRW_HARPOON((p_port + hp_intena), (FPT_default_intena & ~TIMEOUT));
|
|
|
|
WR_HARPOON(p_port + hp_portctrl_0,
|
|
(RD_HARPOON(p_port + hp_portctrl_0) | START_TO));
|
|
|
|
while (!(RDW_HARPOON((p_port + hp_intstat)) & TIMEOUT)) {
|
|
|
|
if ((RD_HARPOON(p_port + hp_scsictrl_0) & SCSI_RST))
|
|
break;
|
|
|
|
if ((RDW_HARPOON((p_port + hp_intstat)) & SCAM_SEL))
|
|
break;
|
|
}
|
|
|
|
WR_HARPOON(p_port + hp_portctrl_0,
|
|
(RD_HARPOON(p_port + hp_portctrl_0) & ~START_TO));
|
|
|
|
WRW_HARPOON((p_port + hp_intstat), TIMEOUT);
|
|
WRW_HARPOON((p_port + hp_intena), FPT_default_intena);
|
|
|
|
WR_HARPOON(p_port + hp_clkctrl_0, green_flag);
|
|
|
|
WR_HARPOON(p_port + hp_seltimeout, old_timer);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Enable/Disable Write to EEPROM
|
|
*
|
|
* Description: The EEPROM must first be enabled for writes
|
|
* A total of 9 clocks are needed.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_utilEEWriteOnOff(u32 p_port, unsigned char p_mode)
|
|
{
|
|
unsigned char ee_value;
|
|
|
|
ee_value =
|
|
(unsigned char)(RD_HARPOON(p_port + hp_ee_ctrl) &
|
|
(EXT_ARB_ACK | SCSI_TERM_ENA_H));
|
|
|
|
if (p_mode)
|
|
|
|
FPT_utilEESendCmdAddr(p_port, EWEN, EWEN_ADDR);
|
|
|
|
else
|
|
|
|
FPT_utilEESendCmdAddr(p_port, EWDS, EWDS_ADDR);
|
|
|
|
WR_HARPOON(p_port + hp_ee_ctrl, (ee_value | SEE_MS)); /*Turn off CS */
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value); /*Turn off Master Select */
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Write EEPROM
|
|
*
|
|
* Description: Write a word to the EEPROM at the specified
|
|
* address.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_utilEEWrite(u32 p_port, unsigned short ee_data,
|
|
unsigned short ee_addr)
|
|
{
|
|
|
|
unsigned char ee_value;
|
|
unsigned short i;
|
|
|
|
ee_value =
|
|
(unsigned
|
|
char)((RD_HARPOON(p_port + hp_ee_ctrl) &
|
|
(EXT_ARB_ACK | SCSI_TERM_ENA_H)) | (SEE_MS | SEE_CS));
|
|
|
|
FPT_utilEESendCmdAddr(p_port, EE_WRITE, ee_addr);
|
|
|
|
ee_value |= (SEE_MS + SEE_CS);
|
|
|
|
for (i = 0x8000; i != 0; i >>= 1) {
|
|
|
|
if (i & ee_data)
|
|
ee_value |= SEE_DO;
|
|
else
|
|
ee_value &= ~SEE_DO;
|
|
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
ee_value |= SEE_CLK; /* Clock data! */
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
ee_value &= ~SEE_CLK;
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
}
|
|
ee_value &= (EXT_ARB_ACK | SCSI_TERM_ENA_H);
|
|
WR_HARPOON(p_port + hp_ee_ctrl, (ee_value | SEE_MS));
|
|
|
|
FPT_Wait(p_port, TO_10ms);
|
|
|
|
WR_HARPOON(p_port + hp_ee_ctrl, (ee_value | SEE_MS | SEE_CS)); /* Set CS to EEPROM */
|
|
WR_HARPOON(p_port + hp_ee_ctrl, (ee_value | SEE_MS)); /* Turn off CS */
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value); /* Turn off Master Select */
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Read EEPROM
|
|
*
|
|
* Description: Read a word from the EEPROM at the desired
|
|
* address.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static unsigned short FPT_utilEERead(u32 p_port,
|
|
unsigned short ee_addr)
|
|
{
|
|
unsigned short i, ee_data1, ee_data2;
|
|
|
|
i = 0;
|
|
ee_data1 = FPT_utilEEReadOrg(p_port, ee_addr);
|
|
do {
|
|
ee_data2 = FPT_utilEEReadOrg(p_port, ee_addr);
|
|
|
|
if (ee_data1 == ee_data2)
|
|
return ee_data1;
|
|
|
|
ee_data1 = ee_data2;
|
|
i++;
|
|
|
|
} while (i < 4);
|
|
|
|
return ee_data1;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Read EEPROM Original
|
|
*
|
|
* Description: Read a word from the EEPROM at the desired
|
|
* address.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static unsigned short FPT_utilEEReadOrg(u32 p_port, unsigned short ee_addr)
|
|
{
|
|
|
|
unsigned char ee_value;
|
|
unsigned short i, ee_data;
|
|
|
|
ee_value =
|
|
(unsigned
|
|
char)((RD_HARPOON(p_port + hp_ee_ctrl) &
|
|
(EXT_ARB_ACK | SCSI_TERM_ENA_H)) | (SEE_MS | SEE_CS));
|
|
|
|
FPT_utilEESendCmdAddr(p_port, EE_READ, ee_addr);
|
|
|
|
ee_value |= (SEE_MS + SEE_CS);
|
|
ee_data = 0;
|
|
|
|
for (i = 1; i <= 16; i++) {
|
|
|
|
ee_value |= SEE_CLK; /* Clock data! */
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
ee_value &= ~SEE_CLK;
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
|
|
ee_data <<= 1;
|
|
|
|
if (RD_HARPOON(p_port + hp_ee_ctrl) & SEE_DI)
|
|
ee_data |= 1;
|
|
}
|
|
|
|
ee_value &= ~(SEE_MS + SEE_CS);
|
|
WR_HARPOON(p_port + hp_ee_ctrl, (ee_value | SEE_MS)); /*Turn off CS */
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value); /*Turn off Master Select */
|
|
|
|
return ee_data;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------
|
|
*
|
|
* Function: Send EE command and Address to the EEPROM
|
|
*
|
|
* Description: Transfers the correct command and sends the address
|
|
* to the eeprom.
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
|
|
static void FPT_utilEESendCmdAddr(u32 p_port, unsigned char ee_cmd,
|
|
unsigned short ee_addr)
|
|
{
|
|
unsigned char ee_value;
|
|
unsigned char narrow_flg;
|
|
|
|
unsigned short i;
|
|
|
|
narrow_flg =
|
|
(unsigned char)(RD_HARPOON(p_port + hp_page_ctrl) &
|
|
NARROW_SCSI_CARD);
|
|
|
|
ee_value = SEE_MS;
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
|
|
ee_value |= SEE_CS; /* Set CS to EEPROM */
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
|
|
for (i = 0x04; i != 0; i >>= 1) {
|
|
|
|
if (i & ee_cmd)
|
|
ee_value |= SEE_DO;
|
|
else
|
|
ee_value &= ~SEE_DO;
|
|
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
ee_value |= SEE_CLK; /* Clock data! */
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
ee_value &= ~SEE_CLK;
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
}
|
|
|
|
if (narrow_flg)
|
|
i = 0x0080;
|
|
|
|
else
|
|
i = 0x0200;
|
|
|
|
while (i != 0) {
|
|
|
|
if (i & ee_addr)
|
|
ee_value |= SEE_DO;
|
|
else
|
|
ee_value &= ~SEE_DO;
|
|
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
ee_value |= SEE_CLK; /* Clock data! */
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
ee_value &= ~SEE_CLK;
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
WR_HARPOON(p_port + hp_ee_ctrl, ee_value);
|
|
|
|
i >>= 1;
|
|
}
|
|
}
|
|
|
|
static unsigned short FPT_CalcCrc16(unsigned char buffer[])
|
|
{
|
|
unsigned short crc = 0;
|
|
int i, j;
|
|
unsigned short ch;
|
|
for (i = 0; i < ID_STRING_LENGTH; i++) {
|
|
ch = (unsigned short)buffer[i];
|
|
for (j = 0; j < 8; j++) {
|
|
if ((crc ^ ch) & 1)
|
|
crc = (crc >> 1) ^ CRCMASK;
|
|
else
|
|
crc >>= 1;
|
|
ch >>= 1;
|
|
}
|
|
}
|
|
return crc;
|
|
}
|
|
|
|
static unsigned char FPT_CalcLrc(unsigned char buffer[])
|
|
{
|
|
int i;
|
|
unsigned char lrc;
|
|
lrc = 0;
|
|
for (i = 0; i < ID_STRING_LENGTH; i++)
|
|
lrc ^= buffer[i];
|
|
return lrc;
|
|
}
|
|
|
|
/*
|
|
The following inline definitions avoid type conflicts.
|
|
*/
|
|
|
|
static inline unsigned char
|
|
FlashPoint__ProbeHostAdapter(struct fpoint_info *FlashPointInfo)
|
|
{
|
|
return FlashPoint_ProbeHostAdapter((struct sccb_mgr_info *)
|
|
FlashPointInfo);
|
|
}
|
|
|
|
static inline void *
|
|
FlashPoint__HardwareResetHostAdapter(struct fpoint_info *FlashPointInfo)
|
|
{
|
|
return FlashPoint_HardwareResetHostAdapter((struct sccb_mgr_info *)
|
|
FlashPointInfo);
|
|
}
|
|
|
|
static inline void
|
|
FlashPoint__ReleaseHostAdapter(void *CardHandle)
|
|
{
|
|
FlashPoint_ReleaseHostAdapter(CardHandle);
|
|
}
|
|
|
|
static inline void
|
|
FlashPoint__StartCCB(void *CardHandle, struct blogic_ccb *CCB)
|
|
{
|
|
FlashPoint_StartCCB(CardHandle, (struct sccb *)CCB);
|
|
}
|
|
|
|
static inline void
|
|
FlashPoint__AbortCCB(void *CardHandle, struct blogic_ccb *CCB)
|
|
{
|
|
FlashPoint_AbortCCB(CardHandle, (struct sccb *)CCB);
|
|
}
|
|
|
|
static inline bool
|
|
FlashPoint__InterruptPending(void *CardHandle)
|
|
{
|
|
return FlashPoint_InterruptPending(CardHandle);
|
|
}
|
|
|
|
static inline int
|
|
FlashPoint__HandleInterrupt(void *CardHandle)
|
|
{
|
|
return FlashPoint_HandleInterrupt(CardHandle);
|
|
}
|
|
|
|
#define FlashPoint_ProbeHostAdapter FlashPoint__ProbeHostAdapter
|
|
#define FlashPoint_HardwareResetHostAdapter FlashPoint__HardwareResetHostAdapter
|
|
#define FlashPoint_ReleaseHostAdapter FlashPoint__ReleaseHostAdapter
|
|
#define FlashPoint_StartCCB FlashPoint__StartCCB
|
|
#define FlashPoint_AbortCCB FlashPoint__AbortCCB
|
|
#define FlashPoint_InterruptPending FlashPoint__InterruptPending
|
|
#define FlashPoint_HandleInterrupt FlashPoint__HandleInterrupt
|
|
|
|
#else /* !CONFIG_SCSI_FLASHPOINT */
|
|
|
|
/*
|
|
Define prototypes for the FlashPoint SCCB Manager Functions.
|
|
*/
|
|
|
|
extern unsigned char FlashPoint_ProbeHostAdapter(struct fpoint_info *);
|
|
extern void *FlashPoint_HardwareResetHostAdapter(struct fpoint_info *);
|
|
extern void FlashPoint_StartCCB(void *, struct blogic_ccb *);
|
|
extern int FlashPoint_AbortCCB(void *, struct blogic_ccb *);
|
|
extern bool FlashPoint_InterruptPending(void *);
|
|
extern int FlashPoint_HandleInterrupt(void *);
|
|
extern void FlashPoint_ReleaseHostAdapter(void *);
|
|
|
|
#endif /* CONFIG_SCSI_FLASHPOINT */
|