687 строки
18 KiB
C
687 строки
18 KiB
C
/*
|
|
* Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
* Copyright (C) 2004 John Steele Scott <toojays@toojays.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* TODO: Need a big cleanup here. Basically, we need to have different
|
|
* cpufreq_driver structures for the different type of HW instead of the
|
|
* current mess. We also need to better deal with the detection of the
|
|
* type of machine.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/adb.h>
|
|
#include <linux/pmu.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/hardirq.h>
|
|
#include <linux/of_device.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/pmac_feature.h>
|
|
#include <asm/mmu_context.h>
|
|
#include <asm/sections.h>
|
|
#include <asm/cputable.h>
|
|
#include <asm/time.h>
|
|
#include <asm/mpic.h>
|
|
#include <asm/keylargo.h>
|
|
#include <asm/switch_to.h>
|
|
|
|
/* WARNING !!! This will cause calibrate_delay() to be called,
|
|
* but this is an __init function ! So you MUST go edit
|
|
* init/main.c to make it non-init before enabling DEBUG_FREQ
|
|
*/
|
|
#undef DEBUG_FREQ
|
|
|
|
extern void low_choose_7447a_dfs(int dfs);
|
|
extern void low_choose_750fx_pll(int pll);
|
|
extern void low_sleep_handler(void);
|
|
|
|
/*
|
|
* Currently, PowerMac cpufreq supports only high & low frequencies
|
|
* that are set by the firmware
|
|
*/
|
|
static unsigned int low_freq;
|
|
static unsigned int hi_freq;
|
|
static unsigned int cur_freq;
|
|
static unsigned int sleep_freq;
|
|
static unsigned long transition_latency;
|
|
|
|
/*
|
|
* Different models uses different mechanisms to switch the frequency
|
|
*/
|
|
static int (*set_speed_proc)(int low_speed);
|
|
static unsigned int (*get_speed_proc)(void);
|
|
|
|
/*
|
|
* Some definitions used by the various speedprocs
|
|
*/
|
|
static u32 voltage_gpio;
|
|
static u32 frequency_gpio;
|
|
static u32 slew_done_gpio;
|
|
static int no_schedule;
|
|
static int has_cpu_l2lve;
|
|
static int is_pmu_based;
|
|
|
|
/* There are only two frequency states for each processor. Values
|
|
* are in kHz for the time being.
|
|
*/
|
|
#define CPUFREQ_HIGH 0
|
|
#define CPUFREQ_LOW 1
|
|
|
|
static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
|
|
{0, CPUFREQ_HIGH, 0},
|
|
{0, CPUFREQ_LOW, 0},
|
|
{0, 0, CPUFREQ_TABLE_END},
|
|
};
|
|
|
|
static inline void local_delay(unsigned long ms)
|
|
{
|
|
if (no_schedule)
|
|
mdelay(ms);
|
|
else
|
|
msleep(ms);
|
|
}
|
|
|
|
#ifdef DEBUG_FREQ
|
|
static inline void debug_calc_bogomips(void)
|
|
{
|
|
/* This will cause a recalc of bogomips and display the
|
|
* result. We backup/restore the value to avoid affecting the
|
|
* core cpufreq framework's own calculation.
|
|
*/
|
|
unsigned long save_lpj = loops_per_jiffy;
|
|
calibrate_delay();
|
|
loops_per_jiffy = save_lpj;
|
|
}
|
|
#endif /* DEBUG_FREQ */
|
|
|
|
/* Switch CPU speed under 750FX CPU control
|
|
*/
|
|
static int cpu_750fx_cpu_speed(int low_speed)
|
|
{
|
|
u32 hid2;
|
|
|
|
if (low_speed == 0) {
|
|
/* ramping up, set voltage first */
|
|
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
|
|
/* Make sure we sleep for at least 1ms */
|
|
local_delay(10);
|
|
|
|
/* tweak L2 for high voltage */
|
|
if (has_cpu_l2lve) {
|
|
hid2 = mfspr(SPRN_HID2);
|
|
hid2 &= ~0x2000;
|
|
mtspr(SPRN_HID2, hid2);
|
|
}
|
|
}
|
|
#ifdef CONFIG_6xx
|
|
low_choose_750fx_pll(low_speed);
|
|
#endif
|
|
if (low_speed == 1) {
|
|
/* tweak L2 for low voltage */
|
|
if (has_cpu_l2lve) {
|
|
hid2 = mfspr(SPRN_HID2);
|
|
hid2 |= 0x2000;
|
|
mtspr(SPRN_HID2, hid2);
|
|
}
|
|
|
|
/* ramping down, set voltage last */
|
|
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
|
|
local_delay(10);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int cpu_750fx_get_cpu_speed(void)
|
|
{
|
|
if (mfspr(SPRN_HID1) & HID1_PS)
|
|
return low_freq;
|
|
else
|
|
return hi_freq;
|
|
}
|
|
|
|
/* Switch CPU speed using DFS */
|
|
static int dfs_set_cpu_speed(int low_speed)
|
|
{
|
|
if (low_speed == 0) {
|
|
/* ramping up, set voltage first */
|
|
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
|
|
/* Make sure we sleep for at least 1ms */
|
|
local_delay(1);
|
|
}
|
|
|
|
/* set frequency */
|
|
#ifdef CONFIG_6xx
|
|
low_choose_7447a_dfs(low_speed);
|
|
#endif
|
|
udelay(100);
|
|
|
|
if (low_speed == 1) {
|
|
/* ramping down, set voltage last */
|
|
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
|
|
local_delay(1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int dfs_get_cpu_speed(void)
|
|
{
|
|
if (mfspr(SPRN_HID1) & HID1_DFS)
|
|
return low_freq;
|
|
else
|
|
return hi_freq;
|
|
}
|
|
|
|
|
|
/* Switch CPU speed using slewing GPIOs
|
|
*/
|
|
static int gpios_set_cpu_speed(int low_speed)
|
|
{
|
|
int gpio, timeout = 0;
|
|
|
|
/* If ramping up, set voltage first */
|
|
if (low_speed == 0) {
|
|
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
|
|
/* Delay is way too big but it's ok, we schedule */
|
|
local_delay(10);
|
|
}
|
|
|
|
/* Set frequency */
|
|
gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
|
|
if (low_speed == ((gpio & 0x01) == 0))
|
|
goto skip;
|
|
|
|
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio,
|
|
low_speed ? 0x04 : 0x05);
|
|
udelay(200);
|
|
do {
|
|
if (++timeout > 100)
|
|
break;
|
|
local_delay(1);
|
|
gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0);
|
|
} while((gpio & 0x02) == 0);
|
|
skip:
|
|
/* If ramping down, set voltage last */
|
|
if (low_speed == 1) {
|
|
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
|
|
/* Delay is way too big but it's ok, we schedule */
|
|
local_delay(10);
|
|
}
|
|
|
|
#ifdef DEBUG_FREQ
|
|
debug_calc_bogomips();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Switch CPU speed under PMU control
|
|
*/
|
|
static int pmu_set_cpu_speed(int low_speed)
|
|
{
|
|
struct adb_request req;
|
|
unsigned long save_l2cr;
|
|
unsigned long save_l3cr;
|
|
unsigned int pic_prio;
|
|
unsigned long flags;
|
|
|
|
preempt_disable();
|
|
|
|
#ifdef DEBUG_FREQ
|
|
printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
|
|
#endif
|
|
pmu_suspend();
|
|
|
|
/* Disable all interrupt sources on openpic */
|
|
pic_prio = mpic_cpu_get_priority();
|
|
mpic_cpu_set_priority(0xf);
|
|
|
|
/* Make sure the decrementer won't interrupt us */
|
|
asm volatile("mtdec %0" : : "r" (0x7fffffff));
|
|
/* Make sure any pending DEC interrupt occurring while we did
|
|
* the above didn't re-enable the DEC */
|
|
mb();
|
|
asm volatile("mtdec %0" : : "r" (0x7fffffff));
|
|
|
|
/* We can now disable MSR_EE */
|
|
local_irq_save(flags);
|
|
|
|
/* Giveup the FPU & vec */
|
|
enable_kernel_fp();
|
|
|
|
#ifdef CONFIG_ALTIVEC
|
|
if (cpu_has_feature(CPU_FTR_ALTIVEC))
|
|
enable_kernel_altivec();
|
|
#endif /* CONFIG_ALTIVEC */
|
|
|
|
/* Save & disable L2 and L3 caches */
|
|
save_l3cr = _get_L3CR(); /* (returns -1 if not available) */
|
|
save_l2cr = _get_L2CR(); /* (returns -1 if not available) */
|
|
|
|
/* Send the new speed command. My assumption is that this command
|
|
* will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep
|
|
*/
|
|
pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed);
|
|
while (!req.complete)
|
|
pmu_poll();
|
|
|
|
/* Prepare the northbridge for the speed transition */
|
|
pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1);
|
|
|
|
/* Call low level code to backup CPU state and recover from
|
|
* hardware reset
|
|
*/
|
|
low_sleep_handler();
|
|
|
|
/* Restore the northbridge */
|
|
pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0);
|
|
|
|
/* Restore L2 cache */
|
|
if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
|
|
_set_L2CR(save_l2cr);
|
|
/* Restore L3 cache */
|
|
if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
|
|
_set_L3CR(save_l3cr);
|
|
|
|
/* Restore userland MMU context */
|
|
switch_mmu_context(NULL, current->active_mm);
|
|
|
|
#ifdef DEBUG_FREQ
|
|
printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
|
|
#endif
|
|
|
|
/* Restore low level PMU operations */
|
|
pmu_unlock();
|
|
|
|
/*
|
|
* Restore decrementer; we'll take a decrementer interrupt
|
|
* as soon as interrupts are re-enabled and the generic
|
|
* clockevents code will reprogram it with the right value.
|
|
*/
|
|
set_dec(1);
|
|
|
|
/* Restore interrupts */
|
|
mpic_cpu_set_priority(pic_prio);
|
|
|
|
/* Let interrupts flow again ... */
|
|
local_irq_restore(flags);
|
|
|
|
#ifdef DEBUG_FREQ
|
|
debug_calc_bogomips();
|
|
#endif
|
|
|
|
pmu_resume();
|
|
|
|
preempt_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode)
|
|
{
|
|
unsigned long l3cr;
|
|
static unsigned long prev_l3cr;
|
|
|
|
if (speed_mode == CPUFREQ_LOW &&
|
|
cpu_has_feature(CPU_FTR_L3CR)) {
|
|
l3cr = _get_L3CR();
|
|
if (l3cr & L3CR_L3E) {
|
|
prev_l3cr = l3cr;
|
|
_set_L3CR(0);
|
|
}
|
|
}
|
|
set_speed_proc(speed_mode == CPUFREQ_LOW);
|
|
if (speed_mode == CPUFREQ_HIGH &&
|
|
cpu_has_feature(CPU_FTR_L3CR)) {
|
|
l3cr = _get_L3CR();
|
|
if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
|
|
_set_L3CR(prev_l3cr);
|
|
}
|
|
cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int pmac_cpufreq_get_speed(unsigned int cpu)
|
|
{
|
|
return cur_freq;
|
|
}
|
|
|
|
static int pmac_cpufreq_target( struct cpufreq_policy *policy,
|
|
unsigned int index)
|
|
{
|
|
int rc;
|
|
|
|
rc = do_set_cpu_speed(policy, index);
|
|
|
|
ppc_proc_freq = cur_freq * 1000ul;
|
|
return rc;
|
|
}
|
|
|
|
static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
|
|
{
|
|
return cpufreq_generic_init(policy, pmac_cpu_freqs, transition_latency);
|
|
}
|
|
|
|
static u32 read_gpio(struct device_node *np)
|
|
{
|
|
const u32 *reg = of_get_property(np, "reg", NULL);
|
|
u32 offset;
|
|
|
|
if (reg == NULL)
|
|
return 0;
|
|
/* That works for all keylargos but shall be fixed properly
|
|
* some day... The problem is that it seems we can't rely
|
|
* on the "reg" property of the GPIO nodes, they are either
|
|
* relative to the base of KeyLargo or to the base of the
|
|
* GPIO space, and the device-tree doesn't help.
|
|
*/
|
|
offset = *reg;
|
|
if (offset < KEYLARGO_GPIO_LEVELS0)
|
|
offset += KEYLARGO_GPIO_LEVELS0;
|
|
return offset;
|
|
}
|
|
|
|
static int pmac_cpufreq_suspend(struct cpufreq_policy *policy)
|
|
{
|
|
/* Ok, this could be made a bit smarter, but let's be robust for now. We
|
|
* always force a speed change to high speed before sleep, to make sure
|
|
* we have appropriate voltage and/or bus speed for the wakeup process,
|
|
* and to make sure our loops_per_jiffies are "good enough", that is will
|
|
* not cause too short delays if we sleep in low speed and wake in high
|
|
* speed..
|
|
*/
|
|
no_schedule = 1;
|
|
sleep_freq = cur_freq;
|
|
if (cur_freq == low_freq && !is_pmu_based)
|
|
do_set_cpu_speed(policy, CPUFREQ_HIGH);
|
|
return 0;
|
|
}
|
|
|
|
static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
|
|
{
|
|
/* If we resume, first check if we have a get() function */
|
|
if (get_speed_proc)
|
|
cur_freq = get_speed_proc();
|
|
else
|
|
cur_freq = 0;
|
|
|
|
/* We don't, hrm... we don't really know our speed here, best
|
|
* is that we force a switch to whatever it was, which is
|
|
* probably high speed due to our suspend() routine
|
|
*/
|
|
do_set_cpu_speed(policy, sleep_freq == low_freq ?
|
|
CPUFREQ_LOW : CPUFREQ_HIGH);
|
|
|
|
ppc_proc_freq = cur_freq * 1000ul;
|
|
|
|
no_schedule = 0;
|
|
return 0;
|
|
}
|
|
|
|
static struct cpufreq_driver pmac_cpufreq_driver = {
|
|
.verify = cpufreq_generic_frequency_table_verify,
|
|
.target_index = pmac_cpufreq_target,
|
|
.get = pmac_cpufreq_get_speed,
|
|
.init = pmac_cpufreq_cpu_init,
|
|
.suspend = pmac_cpufreq_suspend,
|
|
.resume = pmac_cpufreq_resume,
|
|
.flags = CPUFREQ_PM_NO_WARN,
|
|
.attr = cpufreq_generic_attr,
|
|
.name = "powermac",
|
|
};
|
|
|
|
|
|
static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
|
|
{
|
|
struct device_node *volt_gpio_np = of_find_node_by_name(NULL,
|
|
"voltage-gpio");
|
|
struct device_node *freq_gpio_np = of_find_node_by_name(NULL,
|
|
"frequency-gpio");
|
|
struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL,
|
|
"slewing-done");
|
|
const u32 *value;
|
|
|
|
/*
|
|
* Check to see if it's GPIO driven or PMU only
|
|
*
|
|
* The way we extract the GPIO address is slightly hackish, but it
|
|
* works well enough for now. We need to abstract the whole GPIO
|
|
* stuff sooner or later anyway
|
|
*/
|
|
|
|
if (volt_gpio_np)
|
|
voltage_gpio = read_gpio(volt_gpio_np);
|
|
if (freq_gpio_np)
|
|
frequency_gpio = read_gpio(freq_gpio_np);
|
|
if (slew_done_gpio_np)
|
|
slew_done_gpio = read_gpio(slew_done_gpio_np);
|
|
|
|
/* If we use the frequency GPIOs, calculate the min/max speeds based
|
|
* on the bus frequencies
|
|
*/
|
|
if (frequency_gpio && slew_done_gpio) {
|
|
int lenp, rc;
|
|
const u32 *freqs, *ratio;
|
|
|
|
freqs = of_get_property(cpunode, "bus-frequencies", &lenp);
|
|
lenp /= sizeof(u32);
|
|
if (freqs == NULL || lenp != 2) {
|
|
printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
|
|
return 1;
|
|
}
|
|
ratio = of_get_property(cpunode, "processor-to-bus-ratio*2",
|
|
NULL);
|
|
if (ratio == NULL) {
|
|
printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
|
|
return 1;
|
|
}
|
|
|
|
/* Get the min/max bus frequencies */
|
|
low_freq = min(freqs[0], freqs[1]);
|
|
hi_freq = max(freqs[0], freqs[1]);
|
|
|
|
/* Grrrr.. It _seems_ that the device-tree is lying on the low bus
|
|
* frequency, it claims it to be around 84Mhz on some models while
|
|
* it appears to be approx. 101Mhz on all. Let's hack around here...
|
|
* fortunately, we don't need to be too precise
|
|
*/
|
|
if (low_freq < 98000000)
|
|
low_freq = 101000000;
|
|
|
|
/* Convert those to CPU core clocks */
|
|
low_freq = (low_freq * (*ratio)) / 2000;
|
|
hi_freq = (hi_freq * (*ratio)) / 2000;
|
|
|
|
/* Now we get the frequencies, we read the GPIO to see what is out current
|
|
* speed
|
|
*/
|
|
rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
|
|
cur_freq = (rc & 0x01) ? hi_freq : low_freq;
|
|
|
|
set_speed_proc = gpios_set_cpu_speed;
|
|
return 1;
|
|
}
|
|
|
|
/* If we use the PMU, look for the min & max frequencies in the
|
|
* device-tree
|
|
*/
|
|
value = of_get_property(cpunode, "min-clock-frequency", NULL);
|
|
if (!value)
|
|
return 1;
|
|
low_freq = (*value) / 1000;
|
|
/* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree
|
|
* here */
|
|
if (low_freq < 100000)
|
|
low_freq *= 10;
|
|
|
|
value = of_get_property(cpunode, "max-clock-frequency", NULL);
|
|
if (!value)
|
|
return 1;
|
|
hi_freq = (*value) / 1000;
|
|
set_speed_proc = pmu_set_cpu_speed;
|
|
is_pmu_based = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
|
|
{
|
|
struct device_node *volt_gpio_np;
|
|
|
|
if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
|
|
return 1;
|
|
|
|
volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
|
|
if (volt_gpio_np)
|
|
voltage_gpio = read_gpio(volt_gpio_np);
|
|
if (!voltage_gpio){
|
|
printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n");
|
|
return 1;
|
|
}
|
|
|
|
/* OF only reports the high frequency */
|
|
hi_freq = cur_freq;
|
|
low_freq = cur_freq/2;
|
|
|
|
/* Read actual frequency from CPU */
|
|
cur_freq = dfs_get_cpu_speed();
|
|
set_speed_proc = dfs_set_cpu_speed;
|
|
get_speed_proc = dfs_get_cpu_speed;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
|
|
{
|
|
struct device_node *volt_gpio_np;
|
|
u32 pvr;
|
|
const u32 *value;
|
|
|
|
if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
|
|
return 1;
|
|
|
|
hi_freq = cur_freq;
|
|
value = of_get_property(cpunode, "reduced-clock-frequency", NULL);
|
|
if (!value)
|
|
return 1;
|
|
low_freq = (*value) / 1000;
|
|
|
|
volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
|
|
if (volt_gpio_np)
|
|
voltage_gpio = read_gpio(volt_gpio_np);
|
|
|
|
pvr = mfspr(SPRN_PVR);
|
|
has_cpu_l2lve = !((pvr & 0xf00) == 0x100);
|
|
|
|
set_speed_proc = cpu_750fx_cpu_speed;
|
|
get_speed_proc = cpu_750fx_get_cpu_speed;
|
|
cur_freq = cpu_750fx_get_cpu_speed();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Currently, we support the following machines:
|
|
*
|
|
* - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz)
|
|
* - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz)
|
|
* - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz)
|
|
* - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz)
|
|
* - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz)
|
|
* - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage)
|
|
* - Recent MacRISC3 laptops
|
|
* - All new machines with 7447A CPUs
|
|
*/
|
|
static int __init pmac_cpufreq_setup(void)
|
|
{
|
|
struct device_node *cpunode;
|
|
const u32 *value;
|
|
|
|
if (strstr(boot_command_line, "nocpufreq"))
|
|
return 0;
|
|
|
|
/* Get first CPU node */
|
|
cpunode = of_cpu_device_node_get(0);
|
|
if (!cpunode)
|
|
goto out;
|
|
|
|
/* Get current cpu clock freq */
|
|
value = of_get_property(cpunode, "clock-frequency", NULL);
|
|
if (!value)
|
|
goto out;
|
|
cur_freq = (*value) / 1000;
|
|
transition_latency = CPUFREQ_ETERNAL;
|
|
|
|
/* Check for 7447A based MacRISC3 */
|
|
if (of_machine_is_compatible("MacRISC3") &&
|
|
of_get_property(cpunode, "dynamic-power-step", NULL) &&
|
|
PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
|
|
pmac_cpufreq_init_7447A(cpunode);
|
|
transition_latency = 8000000;
|
|
/* Check for other MacRISC3 machines */
|
|
} else if (of_machine_is_compatible("PowerBook3,4") ||
|
|
of_machine_is_compatible("PowerBook3,5") ||
|
|
of_machine_is_compatible("MacRISC3")) {
|
|
pmac_cpufreq_init_MacRISC3(cpunode);
|
|
/* Else check for iBook2 500/600 */
|
|
} else if (of_machine_is_compatible("PowerBook4,1")) {
|
|
hi_freq = cur_freq;
|
|
low_freq = 400000;
|
|
set_speed_proc = pmu_set_cpu_speed;
|
|
is_pmu_based = 1;
|
|
}
|
|
/* Else check for TiPb 550 */
|
|
else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
|
|
hi_freq = cur_freq;
|
|
low_freq = 500000;
|
|
set_speed_proc = pmu_set_cpu_speed;
|
|
is_pmu_based = 1;
|
|
}
|
|
/* Else check for TiPb 400 & 500 */
|
|
else if (of_machine_is_compatible("PowerBook3,2")) {
|
|
/* We only know about the 400 MHz and the 500Mhz model
|
|
* they both have 300 MHz as low frequency
|
|
*/
|
|
if (cur_freq < 350000 || cur_freq > 550000)
|
|
goto out;
|
|
hi_freq = cur_freq;
|
|
low_freq = 300000;
|
|
set_speed_proc = pmu_set_cpu_speed;
|
|
is_pmu_based = 1;
|
|
}
|
|
/* Else check for 750FX */
|
|
else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000)
|
|
pmac_cpufreq_init_750FX(cpunode);
|
|
out:
|
|
of_node_put(cpunode);
|
|
if (set_speed_proc == NULL)
|
|
return -ENODEV;
|
|
|
|
pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq;
|
|
pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
|
|
ppc_proc_freq = cur_freq * 1000ul;
|
|
|
|
printk(KERN_INFO "Registering PowerMac CPU frequency driver\n");
|
|
printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
|
|
low_freq/1000, hi_freq/1000, cur_freq/1000);
|
|
|
|
return cpufreq_register_driver(&pmac_cpufreq_driver);
|
|
}
|
|
|
|
module_init(pmac_cpufreq_setup);
|
|
|