596 строки
15 KiB
C
596 строки
15 KiB
C
/*
|
|
* Copyright (c) 2012 Qualcomm Atheros, Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include "wil6210.h"
|
|
#include "wmi.h"
|
|
|
|
#define CHAN60G(_channel, _flags) { \
|
|
.band = IEEE80211_BAND_60GHZ, \
|
|
.center_freq = 56160 + (2160 * (_channel)), \
|
|
.hw_value = (_channel), \
|
|
.flags = (_flags), \
|
|
.max_antenna_gain = 0, \
|
|
.max_power = 40, \
|
|
}
|
|
|
|
static struct ieee80211_channel wil_60ghz_channels[] = {
|
|
CHAN60G(1, 0),
|
|
CHAN60G(2, 0),
|
|
CHAN60G(3, 0),
|
|
/* channel 4 not supported yet */
|
|
};
|
|
|
|
static struct ieee80211_supported_band wil_band_60ghz = {
|
|
.channels = wil_60ghz_channels,
|
|
.n_channels = ARRAY_SIZE(wil_60ghz_channels),
|
|
.ht_cap = {
|
|
.ht_supported = true,
|
|
.cap = 0, /* TODO */
|
|
.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K, /* TODO */
|
|
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, /* TODO */
|
|
.mcs = {
|
|
/* MCS 1..12 - SC PHY */
|
|
.rx_mask = {0xfe, 0x1f}, /* 1..12 */
|
|
.tx_params = IEEE80211_HT_MCS_TX_DEFINED, /* TODO */
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct ieee80211_txrx_stypes
|
|
wil_mgmt_stypes[NUM_NL80211_IFTYPES] = {
|
|
[NL80211_IFTYPE_STATION] = {
|
|
.tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
|
|
BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
|
|
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
|
|
BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
|
|
},
|
|
[NL80211_IFTYPE_AP] = {
|
|
.tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
|
|
BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
|
|
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
|
|
BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
|
|
},
|
|
[NL80211_IFTYPE_P2P_CLIENT] = {
|
|
.tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
|
|
BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
|
|
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
|
|
BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
|
|
},
|
|
[NL80211_IFTYPE_P2P_GO] = {
|
|
.tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
|
|
BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
|
|
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
|
|
BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
|
|
},
|
|
};
|
|
|
|
static const u32 wil_cipher_suites[] = {
|
|
WLAN_CIPHER_SUITE_GCMP,
|
|
};
|
|
|
|
int wil_iftype_nl2wmi(enum nl80211_iftype type)
|
|
{
|
|
static const struct {
|
|
enum nl80211_iftype nl;
|
|
enum wmi_network_type wmi;
|
|
} __nl2wmi[] = {
|
|
{NL80211_IFTYPE_ADHOC, WMI_NETTYPE_ADHOC},
|
|
{NL80211_IFTYPE_STATION, WMI_NETTYPE_INFRA},
|
|
{NL80211_IFTYPE_AP, WMI_NETTYPE_AP},
|
|
{NL80211_IFTYPE_P2P_CLIENT, WMI_NETTYPE_P2P},
|
|
{NL80211_IFTYPE_P2P_GO, WMI_NETTYPE_P2P},
|
|
{NL80211_IFTYPE_MONITOR, WMI_NETTYPE_ADHOC}, /* FIXME */
|
|
};
|
|
uint i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(__nl2wmi); i++) {
|
|
if (__nl2wmi[i].nl == type)
|
|
return __nl2wmi[i].wmi;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int wil_cfg80211_get_station(struct wiphy *wiphy,
|
|
struct net_device *ndev,
|
|
u8 *mac, struct station_info *sinfo)
|
|
{
|
|
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
|
|
int rc;
|
|
struct wmi_notify_req_cmd cmd = {
|
|
.cid = 0,
|
|
.interval_usec = 0,
|
|
};
|
|
|
|
if (memcmp(mac, wil->dst_addr[0], ETH_ALEN))
|
|
return -ENOENT;
|
|
|
|
/* WMI_NOTIFY_REQ_DONE_EVENTID handler fills wil->stats.bf_mcs */
|
|
rc = wmi_call(wil, WMI_NOTIFY_REQ_CMDID, &cmd, sizeof(cmd),
|
|
WMI_NOTIFY_REQ_DONE_EVENTID, NULL, 0, 20);
|
|
if (rc)
|
|
return rc;
|
|
|
|
sinfo->generation = wil->sinfo_gen;
|
|
|
|
sinfo->filled |= STATION_INFO_TX_BITRATE;
|
|
sinfo->txrate.flags = RATE_INFO_FLAGS_MCS | RATE_INFO_FLAGS_60G;
|
|
sinfo->txrate.mcs = wil->stats.bf_mcs;
|
|
sinfo->filled |= STATION_INFO_RX_BITRATE;
|
|
sinfo->rxrate.flags = RATE_INFO_FLAGS_MCS | RATE_INFO_FLAGS_60G;
|
|
sinfo->rxrate.mcs = wil->stats.last_mcs_rx;
|
|
|
|
if (test_bit(wil_status_fwconnected, &wil->status)) {
|
|
sinfo->filled |= STATION_INFO_SIGNAL;
|
|
sinfo->signal = 12; /* TODO: provide real value */
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wil_cfg80211_change_iface(struct wiphy *wiphy,
|
|
struct net_device *ndev,
|
|
enum nl80211_iftype type, u32 *flags,
|
|
struct vif_params *params)
|
|
{
|
|
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
|
|
struct wireless_dev *wdev = wil->wdev;
|
|
|
|
switch (type) {
|
|
case NL80211_IFTYPE_STATION:
|
|
case NL80211_IFTYPE_AP:
|
|
case NL80211_IFTYPE_P2P_CLIENT:
|
|
case NL80211_IFTYPE_P2P_GO:
|
|
break;
|
|
case NL80211_IFTYPE_MONITOR:
|
|
if (flags)
|
|
wil->monitor_flags = *flags;
|
|
else
|
|
wil->monitor_flags = 0;
|
|
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
wdev->iftype = type;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wil_cfg80211_scan(struct wiphy *wiphy,
|
|
struct cfg80211_scan_request *request)
|
|
{
|
|
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
|
|
struct wireless_dev *wdev = wil->wdev;
|
|
struct {
|
|
struct wmi_start_scan_cmd cmd;
|
|
u16 chnl[4];
|
|
} __packed cmd;
|
|
uint i, n;
|
|
|
|
if (wil->scan_request) {
|
|
wil_err(wil, "Already scanning\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* check we are client side */
|
|
switch (wdev->iftype) {
|
|
case NL80211_IFTYPE_STATION:
|
|
case NL80211_IFTYPE_P2P_CLIENT:
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
/* FW don't support scan after connection attempt */
|
|
if (test_bit(wil_status_dontscan, &wil->status)) {
|
|
wil_err(wil, "Scan after connect attempt not supported\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
wil->scan_request = request;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.cmd.num_channels = 0;
|
|
n = min(request->n_channels, 4U);
|
|
for (i = 0; i < n; i++) {
|
|
int ch = request->channels[i]->hw_value;
|
|
if (ch == 0) {
|
|
wil_err(wil,
|
|
"Scan requested for unknown frequency %dMhz\n",
|
|
request->channels[i]->center_freq);
|
|
continue;
|
|
}
|
|
/* 0-based channel indexes */
|
|
cmd.cmd.channel_list[cmd.cmd.num_channels++].channel = ch - 1;
|
|
wil_dbg_misc(wil, "Scan for ch %d : %d MHz\n", ch,
|
|
request->channels[i]->center_freq);
|
|
}
|
|
|
|
return wmi_send(wil, WMI_START_SCAN_CMDID, &cmd, sizeof(cmd.cmd) +
|
|
cmd.cmd.num_channels * sizeof(cmd.cmd.channel_list[0]));
|
|
}
|
|
|
|
static int wil_cfg80211_connect(struct wiphy *wiphy,
|
|
struct net_device *ndev,
|
|
struct cfg80211_connect_params *sme)
|
|
{
|
|
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
|
|
struct cfg80211_bss *bss;
|
|
struct wmi_connect_cmd conn;
|
|
const u8 *ssid_eid;
|
|
const u8 *rsn_eid;
|
|
int ch;
|
|
int rc = 0;
|
|
|
|
bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid,
|
|
sme->ssid, sme->ssid_len,
|
|
WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
|
|
if (!bss) {
|
|
wil_err(wil, "Unable to find BSS\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
ssid_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SSID);
|
|
if (!ssid_eid) {
|
|
wil_err(wil, "No SSID\n");
|
|
rc = -ENOENT;
|
|
goto out;
|
|
}
|
|
|
|
rsn_eid = sme->ie ?
|
|
cfg80211_find_ie(WLAN_EID_RSN, sme->ie, sme->ie_len) :
|
|
NULL;
|
|
if (rsn_eid) {
|
|
if (sme->ie_len > WMI_MAX_IE_LEN) {
|
|
rc = -ERANGE;
|
|
wil_err(wil, "IE too large (%td bytes)\n",
|
|
sme->ie_len);
|
|
goto out;
|
|
}
|
|
/*
|
|
* For secure assoc, send:
|
|
* (1) WMI_DELETE_CIPHER_KEY_CMD
|
|
* (2) WMI_SET_APPIE_CMD
|
|
*/
|
|
rc = wmi_del_cipher_key(wil, 0, bss->bssid);
|
|
if (rc) {
|
|
wil_err(wil, "WMI_DELETE_CIPHER_KEY_CMD failed\n");
|
|
goto out;
|
|
}
|
|
/* WMI_SET_APPIE_CMD */
|
|
rc = wmi_set_ie(wil, WMI_FRAME_ASSOC_REQ, sme->ie_len, sme->ie);
|
|
if (rc) {
|
|
wil_err(wil, "WMI_SET_APPIE_CMD failed\n");
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* WMI_CONNECT_CMD */
|
|
memset(&conn, 0, sizeof(conn));
|
|
switch (bss->capability & WLAN_CAPABILITY_DMG_TYPE_MASK) {
|
|
case WLAN_CAPABILITY_DMG_TYPE_AP:
|
|
conn.network_type = WMI_NETTYPE_INFRA;
|
|
break;
|
|
case WLAN_CAPABILITY_DMG_TYPE_PBSS:
|
|
conn.network_type = WMI_NETTYPE_P2P;
|
|
break;
|
|
default:
|
|
wil_err(wil, "Unsupported BSS type, capability= 0x%04x\n",
|
|
bss->capability);
|
|
goto out;
|
|
}
|
|
if (rsn_eid) {
|
|
conn.dot11_auth_mode = WMI_AUTH11_SHARED;
|
|
conn.auth_mode = WMI_AUTH_WPA2_PSK;
|
|
conn.pairwise_crypto_type = WMI_CRYPT_AES_GCMP;
|
|
conn.pairwise_crypto_len = 16;
|
|
} else {
|
|
conn.dot11_auth_mode = WMI_AUTH11_OPEN;
|
|
conn.auth_mode = WMI_AUTH_NONE;
|
|
}
|
|
|
|
conn.ssid_len = min_t(u8, ssid_eid[1], 32);
|
|
memcpy(conn.ssid, ssid_eid+2, conn.ssid_len);
|
|
|
|
ch = bss->channel->hw_value;
|
|
if (ch == 0) {
|
|
wil_err(wil, "BSS at unknown frequency %dMhz\n",
|
|
bss->channel->center_freq);
|
|
rc = -EOPNOTSUPP;
|
|
goto out;
|
|
}
|
|
conn.channel = ch - 1;
|
|
|
|
memcpy(conn.bssid, bss->bssid, ETH_ALEN);
|
|
memcpy(conn.dst_mac, bss->bssid, ETH_ALEN);
|
|
/*
|
|
* FW don't support scan after connection attempt
|
|
*/
|
|
set_bit(wil_status_dontscan, &wil->status);
|
|
set_bit(wil_status_fwconnecting, &wil->status);
|
|
|
|
rc = wmi_send(wil, WMI_CONNECT_CMDID, &conn, sizeof(conn));
|
|
if (rc == 0) {
|
|
/* Connect can take lots of time */
|
|
mod_timer(&wil->connect_timer,
|
|
jiffies + msecs_to_jiffies(2000));
|
|
} else {
|
|
clear_bit(wil_status_dontscan, &wil->status);
|
|
clear_bit(wil_status_fwconnecting, &wil->status);
|
|
}
|
|
|
|
out:
|
|
cfg80211_put_bss(wiphy, bss);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int wil_cfg80211_disconnect(struct wiphy *wiphy,
|
|
struct net_device *ndev,
|
|
u16 reason_code)
|
|
{
|
|
int rc;
|
|
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
|
|
|
|
rc = wmi_send(wil, WMI_DISCONNECT_CMDID, NULL, 0);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int wil_cfg80211_set_channel(struct wiphy *wiphy,
|
|
struct cfg80211_chan_def *chandef)
|
|
{
|
|
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
|
|
struct wireless_dev *wdev = wil->wdev;
|
|
|
|
wdev->preset_chandef = *chandef;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wil_cfg80211_add_key(struct wiphy *wiphy,
|
|
struct net_device *ndev,
|
|
u8 key_index, bool pairwise,
|
|
const u8 *mac_addr,
|
|
struct key_params *params)
|
|
{
|
|
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
|
|
|
|
/* group key is not used */
|
|
if (!pairwise)
|
|
return 0;
|
|
|
|
return wmi_add_cipher_key(wil, key_index, mac_addr,
|
|
params->key_len, params->key);
|
|
}
|
|
|
|
static int wil_cfg80211_del_key(struct wiphy *wiphy,
|
|
struct net_device *ndev,
|
|
u8 key_index, bool pairwise,
|
|
const u8 *mac_addr)
|
|
{
|
|
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
|
|
|
|
/* group key is not used */
|
|
if (!pairwise)
|
|
return 0;
|
|
|
|
return wmi_del_cipher_key(wil, key_index, mac_addr);
|
|
}
|
|
|
|
/* Need to be present or wiphy_new() will WARN */
|
|
static int wil_cfg80211_set_default_key(struct wiphy *wiphy,
|
|
struct net_device *ndev,
|
|
u8 key_index, bool unicast,
|
|
bool multicast)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int wil_fix_bcon(struct wil6210_priv *wil,
|
|
struct cfg80211_beacon_data *bcon)
|
|
{
|
|
struct ieee80211_mgmt *f = (struct ieee80211_mgmt *)bcon->probe_resp;
|
|
size_t hlen = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
|
|
int rc = 0;
|
|
|
|
if (bcon->probe_resp_len <= hlen)
|
|
return 0;
|
|
|
|
if (!bcon->proberesp_ies) {
|
|
bcon->proberesp_ies = f->u.probe_resp.variable;
|
|
bcon->proberesp_ies_len = bcon->probe_resp_len - hlen;
|
|
rc = 1;
|
|
}
|
|
if (!bcon->assocresp_ies) {
|
|
bcon->assocresp_ies = f->u.probe_resp.variable;
|
|
bcon->assocresp_ies_len = bcon->probe_resp_len - hlen;
|
|
rc = 1;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int wil_cfg80211_start_ap(struct wiphy *wiphy,
|
|
struct net_device *ndev,
|
|
struct cfg80211_ap_settings *info)
|
|
{
|
|
int rc = 0;
|
|
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
|
|
struct wireless_dev *wdev = ndev->ieee80211_ptr;
|
|
struct ieee80211_channel *channel = info->chandef.chan;
|
|
struct cfg80211_beacon_data *bcon = &info->beacon;
|
|
u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
|
|
|
|
if (!channel) {
|
|
wil_err(wil, "AP: No channel???\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
wil_dbg_misc(wil, "AP on Channel %d %d MHz, %s\n", channel->hw_value,
|
|
channel->center_freq, info->privacy ? "secure" : "open");
|
|
print_hex_dump_bytes("SSID ", DUMP_PREFIX_OFFSET,
|
|
info->ssid, info->ssid_len);
|
|
|
|
if (wil_fix_bcon(wil, bcon))
|
|
wil_dbg_misc(wil, "Fixed bcon\n");
|
|
|
|
rc = wil_reset(wil);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Rx VRING. */
|
|
rc = wil_rx_init(wil);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = wmi_set_ssid(wil, info->ssid_len, info->ssid);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* MAC address - pre-requisite for other commands */
|
|
wmi_set_mac_address(wil, ndev->dev_addr);
|
|
|
|
/* IE's */
|
|
/* bcon 'head IE's are not relevant for 60g band */
|
|
/*
|
|
* FW do not form regular beacon, so bcon IE's are not set
|
|
* For the DMG bcon, when it will be supported, bcon IE's will
|
|
* be reused; add something like:
|
|
* wmi_set_ie(wil, WMI_FRAME_BEACON, bcon->beacon_ies_len,
|
|
* bcon->beacon_ies);
|
|
*/
|
|
wmi_set_ie(wil, WMI_FRAME_PROBE_RESP, bcon->proberesp_ies_len,
|
|
bcon->proberesp_ies);
|
|
wmi_set_ie(wil, WMI_FRAME_ASSOC_RESP, bcon->assocresp_ies_len,
|
|
bcon->assocresp_ies);
|
|
|
|
wil->secure_pcp = info->privacy;
|
|
|
|
rc = wmi_pcp_start(wil, info->beacon_interval, wmi_nettype,
|
|
channel->hw_value);
|
|
if (rc)
|
|
return rc;
|
|
|
|
|
|
netif_carrier_on(ndev);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int wil_cfg80211_stop_ap(struct wiphy *wiphy,
|
|
struct net_device *ndev)
|
|
{
|
|
int rc = 0;
|
|
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
|
|
|
|
rc = wmi_pcp_stop(wil);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static struct cfg80211_ops wil_cfg80211_ops = {
|
|
.scan = wil_cfg80211_scan,
|
|
.connect = wil_cfg80211_connect,
|
|
.disconnect = wil_cfg80211_disconnect,
|
|
.change_virtual_intf = wil_cfg80211_change_iface,
|
|
.get_station = wil_cfg80211_get_station,
|
|
.set_monitor_channel = wil_cfg80211_set_channel,
|
|
.add_key = wil_cfg80211_add_key,
|
|
.del_key = wil_cfg80211_del_key,
|
|
.set_default_key = wil_cfg80211_set_default_key,
|
|
/* AP mode */
|
|
.start_ap = wil_cfg80211_start_ap,
|
|
.stop_ap = wil_cfg80211_stop_ap,
|
|
};
|
|
|
|
static void wil_wiphy_init(struct wiphy *wiphy)
|
|
{
|
|
/* TODO: set real value */
|
|
wiphy->max_scan_ssids = 10;
|
|
wiphy->max_num_pmkids = 0 /* TODO: */;
|
|
wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
|
|
BIT(NL80211_IFTYPE_AP) |
|
|
BIT(NL80211_IFTYPE_MONITOR);
|
|
/* TODO: enable P2P when integrated with supplicant:
|
|
* BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_P2P_GO)
|
|
*/
|
|
wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME |
|
|
WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
|
|
dev_warn(wiphy_dev(wiphy), "%s : flags = 0x%08x\n",
|
|
__func__, wiphy->flags);
|
|
wiphy->probe_resp_offload =
|
|
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
|
|
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
|
|
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
|
|
|
|
wiphy->bands[IEEE80211_BAND_60GHZ] = &wil_band_60ghz;
|
|
|
|
/* TODO: figure this out */
|
|
wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
|
|
|
|
wiphy->cipher_suites = wil_cipher_suites;
|
|
wiphy->n_cipher_suites = ARRAY_SIZE(wil_cipher_suites);
|
|
wiphy->mgmt_stypes = wil_mgmt_stypes;
|
|
}
|
|
|
|
struct wireless_dev *wil_cfg80211_init(struct device *dev)
|
|
{
|
|
int rc = 0;
|
|
struct wireless_dev *wdev;
|
|
|
|
wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
|
|
if (!wdev)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
wdev->wiphy = wiphy_new(&wil_cfg80211_ops,
|
|
sizeof(struct wil6210_priv));
|
|
if (!wdev->wiphy) {
|
|
rc = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
set_wiphy_dev(wdev->wiphy, dev);
|
|
wil_wiphy_init(wdev->wiphy);
|
|
|
|
rc = wiphy_register(wdev->wiphy);
|
|
if (rc < 0)
|
|
goto out_failed_reg;
|
|
|
|
return wdev;
|
|
|
|
out_failed_reg:
|
|
wiphy_free(wdev->wiphy);
|
|
out:
|
|
kfree(wdev);
|
|
|
|
return ERR_PTR(rc);
|
|
}
|
|
|
|
void wil_wdev_free(struct wil6210_priv *wil)
|
|
{
|
|
struct wireless_dev *wdev = wil_to_wdev(wil);
|
|
|
|
if (!wdev)
|
|
return;
|
|
|
|
wiphy_unregister(wdev->wiphy);
|
|
wiphy_free(wdev->wiphy);
|
|
kfree(wdev);
|
|
}
|