991 строка
26 KiB
C
991 строка
26 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Marvell EBU Armada SoCs thermal sensor driver
|
|
*
|
|
* Copyright (C) 2013 Marvell
|
|
*/
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/of.h>
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/thermal.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
/* Thermal Manager Control and Status Register */
|
|
#define PMU_TDC0_SW_RST_MASK (0x1 << 1)
|
|
#define PMU_TM_DISABLE_OFFS 0
|
|
#define PMU_TM_DISABLE_MASK (0x1 << PMU_TM_DISABLE_OFFS)
|
|
#define PMU_TDC0_REF_CAL_CNT_OFFS 11
|
|
#define PMU_TDC0_REF_CAL_CNT_MASK (0x1ff << PMU_TDC0_REF_CAL_CNT_OFFS)
|
|
#define PMU_TDC0_OTF_CAL_MASK (0x1 << 30)
|
|
#define PMU_TDC0_START_CAL_MASK (0x1 << 25)
|
|
|
|
#define A375_UNIT_CONTROL_SHIFT 27
|
|
#define A375_UNIT_CONTROL_MASK 0x7
|
|
#define A375_READOUT_INVERT BIT(15)
|
|
#define A375_HW_RESETn BIT(8)
|
|
|
|
/* Errata fields */
|
|
#define CONTROL0_TSEN_TC_TRIM_MASK 0x7
|
|
#define CONTROL0_TSEN_TC_TRIM_VAL 0x3
|
|
|
|
#define CONTROL0_TSEN_START BIT(0)
|
|
#define CONTROL0_TSEN_RESET BIT(1)
|
|
#define CONTROL0_TSEN_ENABLE BIT(2)
|
|
#define CONTROL0_TSEN_AVG_BYPASS BIT(6)
|
|
#define CONTROL0_TSEN_CHAN_SHIFT 13
|
|
#define CONTROL0_TSEN_CHAN_MASK 0xF
|
|
#define CONTROL0_TSEN_OSR_SHIFT 24
|
|
#define CONTROL0_TSEN_OSR_MAX 0x3
|
|
#define CONTROL0_TSEN_MODE_SHIFT 30
|
|
#define CONTROL0_TSEN_MODE_EXTERNAL 0x2
|
|
#define CONTROL0_TSEN_MODE_MASK 0x3
|
|
|
|
#define CONTROL1_TSEN_AVG_MASK 0x7
|
|
#define CONTROL1_EXT_TSEN_SW_RESET BIT(7)
|
|
#define CONTROL1_EXT_TSEN_HW_RESETn BIT(8)
|
|
#define CONTROL1_TSEN_INT_EN BIT(25)
|
|
#define CONTROL1_TSEN_SELECT_OFF 21
|
|
#define CONTROL1_TSEN_SELECT_MASK 0x3
|
|
|
|
#define STATUS_POLL_PERIOD_US 1000
|
|
#define STATUS_POLL_TIMEOUT_US 100000
|
|
#define OVERHEAT_INT_POLL_DELAY_MS 1000
|
|
|
|
struct armada_thermal_data;
|
|
|
|
/* Marvell EBU Thermal Sensor Dev Structure */
|
|
struct armada_thermal_priv {
|
|
struct device *dev;
|
|
struct regmap *syscon;
|
|
char zone_name[THERMAL_NAME_LENGTH];
|
|
/* serialize temperature reads/updates */
|
|
struct mutex update_lock;
|
|
struct armada_thermal_data *data;
|
|
struct thermal_zone_device *overheat_sensor;
|
|
int interrupt_source;
|
|
int current_channel;
|
|
long current_threshold;
|
|
long current_hysteresis;
|
|
};
|
|
|
|
struct armada_thermal_data {
|
|
/* Initialize the thermal IC */
|
|
void (*init)(struct platform_device *pdev,
|
|
struct armada_thermal_priv *priv);
|
|
|
|
/* Formula coeficients: temp = (b - m * reg) / div */
|
|
s64 coef_b;
|
|
s64 coef_m;
|
|
u32 coef_div;
|
|
bool inverted;
|
|
bool signed_sample;
|
|
|
|
/* Register shift and mask to access the sensor temperature */
|
|
unsigned int temp_shift;
|
|
unsigned int temp_mask;
|
|
unsigned int thresh_shift;
|
|
unsigned int hyst_shift;
|
|
unsigned int hyst_mask;
|
|
u32 is_valid_bit;
|
|
|
|
/* Syscon access */
|
|
unsigned int syscon_control0_off;
|
|
unsigned int syscon_control1_off;
|
|
unsigned int syscon_status_off;
|
|
unsigned int dfx_irq_cause_off;
|
|
unsigned int dfx_irq_mask_off;
|
|
unsigned int dfx_overheat_irq;
|
|
unsigned int dfx_server_irq_mask_off;
|
|
unsigned int dfx_server_irq_en;
|
|
|
|
/* One sensor is in the thermal IC, the others are in the CPUs if any */
|
|
unsigned int cpu_nr;
|
|
};
|
|
|
|
struct armada_drvdata {
|
|
enum drvtype {
|
|
LEGACY,
|
|
SYSCON
|
|
} type;
|
|
union {
|
|
struct armada_thermal_priv *priv;
|
|
struct thermal_zone_device *tz;
|
|
} data;
|
|
};
|
|
|
|
/*
|
|
* struct armada_thermal_sensor - hold the information of one thermal sensor
|
|
* @thermal: pointer to the local private structure
|
|
* @tzd: pointer to the thermal zone device
|
|
* @id: identifier of the thermal sensor
|
|
*/
|
|
struct armada_thermal_sensor {
|
|
struct armada_thermal_priv *priv;
|
|
int id;
|
|
};
|
|
|
|
static void armadaxp_init(struct platform_device *pdev,
|
|
struct armada_thermal_priv *priv)
|
|
{
|
|
struct armada_thermal_data *data = priv->data;
|
|
u32 reg;
|
|
|
|
regmap_read(priv->syscon, data->syscon_control1_off, ®);
|
|
reg |= PMU_TDC0_OTF_CAL_MASK;
|
|
|
|
/* Reference calibration value */
|
|
reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
|
|
reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
|
|
|
|
/* Reset the sensor */
|
|
reg |= PMU_TDC0_SW_RST_MASK;
|
|
|
|
regmap_write(priv->syscon, data->syscon_control1_off, reg);
|
|
|
|
reg &= ~PMU_TDC0_SW_RST_MASK;
|
|
regmap_write(priv->syscon, data->syscon_control1_off, reg);
|
|
|
|
/* Enable the sensor */
|
|
regmap_read(priv->syscon, data->syscon_status_off, ®);
|
|
reg &= ~PMU_TM_DISABLE_MASK;
|
|
regmap_write(priv->syscon, data->syscon_status_off, reg);
|
|
}
|
|
|
|
static void armada370_init(struct platform_device *pdev,
|
|
struct armada_thermal_priv *priv)
|
|
{
|
|
struct armada_thermal_data *data = priv->data;
|
|
u32 reg;
|
|
|
|
regmap_read(priv->syscon, data->syscon_control1_off, ®);
|
|
reg |= PMU_TDC0_OTF_CAL_MASK;
|
|
|
|
/* Reference calibration value */
|
|
reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
|
|
reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
|
|
|
|
/* Reset the sensor */
|
|
reg &= ~PMU_TDC0_START_CAL_MASK;
|
|
|
|
regmap_write(priv->syscon, data->syscon_control1_off, reg);
|
|
|
|
msleep(10);
|
|
}
|
|
|
|
static void armada375_init(struct platform_device *pdev,
|
|
struct armada_thermal_priv *priv)
|
|
{
|
|
struct armada_thermal_data *data = priv->data;
|
|
u32 reg;
|
|
|
|
regmap_read(priv->syscon, data->syscon_control1_off, ®);
|
|
reg &= ~(A375_UNIT_CONTROL_MASK << A375_UNIT_CONTROL_SHIFT);
|
|
reg &= ~A375_READOUT_INVERT;
|
|
reg &= ~A375_HW_RESETn;
|
|
regmap_write(priv->syscon, data->syscon_control1_off, reg);
|
|
|
|
msleep(20);
|
|
|
|
reg |= A375_HW_RESETn;
|
|
regmap_write(priv->syscon, data->syscon_control1_off, reg);
|
|
|
|
msleep(50);
|
|
}
|
|
|
|
static int armada_wait_sensor_validity(struct armada_thermal_priv *priv)
|
|
{
|
|
u32 reg;
|
|
|
|
return regmap_read_poll_timeout(priv->syscon,
|
|
priv->data->syscon_status_off, reg,
|
|
reg & priv->data->is_valid_bit,
|
|
STATUS_POLL_PERIOD_US,
|
|
STATUS_POLL_TIMEOUT_US);
|
|
}
|
|
|
|
static void armada380_init(struct platform_device *pdev,
|
|
struct armada_thermal_priv *priv)
|
|
{
|
|
struct armada_thermal_data *data = priv->data;
|
|
u32 reg;
|
|
|
|
/* Disable the HW/SW reset */
|
|
regmap_read(priv->syscon, data->syscon_control1_off, ®);
|
|
reg |= CONTROL1_EXT_TSEN_HW_RESETn;
|
|
reg &= ~CONTROL1_EXT_TSEN_SW_RESET;
|
|
regmap_write(priv->syscon, data->syscon_control1_off, reg);
|
|
|
|
/* Set Tsen Tc Trim to correct default value (errata #132698) */
|
|
regmap_read(priv->syscon, data->syscon_control0_off, ®);
|
|
reg &= ~CONTROL0_TSEN_TC_TRIM_MASK;
|
|
reg |= CONTROL0_TSEN_TC_TRIM_VAL;
|
|
regmap_write(priv->syscon, data->syscon_control0_off, reg);
|
|
}
|
|
|
|
static void armada_ap80x_init(struct platform_device *pdev,
|
|
struct armada_thermal_priv *priv)
|
|
{
|
|
struct armada_thermal_data *data = priv->data;
|
|
u32 reg;
|
|
|
|
regmap_read(priv->syscon, data->syscon_control0_off, ®);
|
|
reg &= ~CONTROL0_TSEN_RESET;
|
|
reg |= CONTROL0_TSEN_START | CONTROL0_TSEN_ENABLE;
|
|
|
|
/* Sample every ~2ms */
|
|
reg |= CONTROL0_TSEN_OSR_MAX << CONTROL0_TSEN_OSR_SHIFT;
|
|
|
|
/* Enable average (2 samples by default) */
|
|
reg &= ~CONTROL0_TSEN_AVG_BYPASS;
|
|
|
|
regmap_write(priv->syscon, data->syscon_control0_off, reg);
|
|
}
|
|
|
|
static void armada_cp110_init(struct platform_device *pdev,
|
|
struct armada_thermal_priv *priv)
|
|
{
|
|
struct armada_thermal_data *data = priv->data;
|
|
u32 reg;
|
|
|
|
armada380_init(pdev, priv);
|
|
|
|
/* Sample every ~2ms */
|
|
regmap_read(priv->syscon, data->syscon_control0_off, ®);
|
|
reg |= CONTROL0_TSEN_OSR_MAX << CONTROL0_TSEN_OSR_SHIFT;
|
|
regmap_write(priv->syscon, data->syscon_control0_off, reg);
|
|
|
|
/* Average the output value over 2^1 = 2 samples */
|
|
regmap_read(priv->syscon, data->syscon_control1_off, ®);
|
|
reg &= ~CONTROL1_TSEN_AVG_MASK;
|
|
reg |= 1;
|
|
regmap_write(priv->syscon, data->syscon_control1_off, reg);
|
|
}
|
|
|
|
static bool armada_is_valid(struct armada_thermal_priv *priv)
|
|
{
|
|
u32 reg;
|
|
|
|
if (!priv->data->is_valid_bit)
|
|
return true;
|
|
|
|
regmap_read(priv->syscon, priv->data->syscon_status_off, ®);
|
|
|
|
return reg & priv->data->is_valid_bit;
|
|
}
|
|
|
|
static void armada_enable_overheat_interrupt(struct armada_thermal_priv *priv)
|
|
{
|
|
struct armada_thermal_data *data = priv->data;
|
|
u32 reg;
|
|
|
|
/* Clear DFX temperature IRQ cause */
|
|
regmap_read(priv->syscon, data->dfx_irq_cause_off, ®);
|
|
|
|
/* Enable DFX Temperature IRQ */
|
|
regmap_read(priv->syscon, data->dfx_irq_mask_off, ®);
|
|
reg |= data->dfx_overheat_irq;
|
|
regmap_write(priv->syscon, data->dfx_irq_mask_off, reg);
|
|
|
|
/* Enable DFX server IRQ */
|
|
regmap_read(priv->syscon, data->dfx_server_irq_mask_off, ®);
|
|
reg |= data->dfx_server_irq_en;
|
|
regmap_write(priv->syscon, data->dfx_server_irq_mask_off, reg);
|
|
|
|
/* Enable overheat interrupt */
|
|
regmap_read(priv->syscon, data->syscon_control1_off, ®);
|
|
reg |= CONTROL1_TSEN_INT_EN;
|
|
regmap_write(priv->syscon, data->syscon_control1_off, reg);
|
|
}
|
|
|
|
static void __maybe_unused
|
|
armada_disable_overheat_interrupt(struct armada_thermal_priv *priv)
|
|
{
|
|
struct armada_thermal_data *data = priv->data;
|
|
u32 reg;
|
|
|
|
regmap_read(priv->syscon, data->syscon_control1_off, ®);
|
|
reg &= ~CONTROL1_TSEN_INT_EN;
|
|
regmap_write(priv->syscon, data->syscon_control1_off, reg);
|
|
}
|
|
|
|
/* There is currently no board with more than one sensor per channel */
|
|
static int armada_select_channel(struct armada_thermal_priv *priv, int channel)
|
|
{
|
|
struct armada_thermal_data *data = priv->data;
|
|
u32 ctrl0;
|
|
|
|
if (channel < 0 || channel > priv->data->cpu_nr)
|
|
return -EINVAL;
|
|
|
|
if (priv->current_channel == channel)
|
|
return 0;
|
|
|
|
/* Stop the measurements */
|
|
regmap_read(priv->syscon, data->syscon_control0_off, &ctrl0);
|
|
ctrl0 &= ~CONTROL0_TSEN_START;
|
|
regmap_write(priv->syscon, data->syscon_control0_off, ctrl0);
|
|
|
|
/* Reset the mode, internal sensor will be automatically selected */
|
|
ctrl0 &= ~(CONTROL0_TSEN_MODE_MASK << CONTROL0_TSEN_MODE_SHIFT);
|
|
|
|
/* Other channels are external and should be selected accordingly */
|
|
if (channel) {
|
|
/* Change the mode to external */
|
|
ctrl0 |= CONTROL0_TSEN_MODE_EXTERNAL <<
|
|
CONTROL0_TSEN_MODE_SHIFT;
|
|
/* Select the sensor */
|
|
ctrl0 &= ~(CONTROL0_TSEN_CHAN_MASK << CONTROL0_TSEN_CHAN_SHIFT);
|
|
ctrl0 |= (channel - 1) << CONTROL0_TSEN_CHAN_SHIFT;
|
|
}
|
|
|
|
/* Actually set the mode/channel */
|
|
regmap_write(priv->syscon, data->syscon_control0_off, ctrl0);
|
|
priv->current_channel = channel;
|
|
|
|
/* Re-start the measurements */
|
|
ctrl0 |= CONTROL0_TSEN_START;
|
|
regmap_write(priv->syscon, data->syscon_control0_off, ctrl0);
|
|
|
|
/*
|
|
* The IP has a latency of ~15ms, so after updating the selected source,
|
|
* we must absolutely wait for the sensor validity bit to ensure we read
|
|
* actual data.
|
|
*/
|
|
if (armada_wait_sensor_validity(priv))
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int armada_read_sensor(struct armada_thermal_priv *priv, int *temp)
|
|
{
|
|
u32 reg, div;
|
|
s64 sample, b, m;
|
|
|
|
regmap_read(priv->syscon, priv->data->syscon_status_off, ®);
|
|
reg = (reg >> priv->data->temp_shift) & priv->data->temp_mask;
|
|
if (priv->data->signed_sample)
|
|
/* The most significant bit is the sign bit */
|
|
sample = sign_extend32(reg, fls(priv->data->temp_mask) - 1);
|
|
else
|
|
sample = reg;
|
|
|
|
/* Get formula coeficients */
|
|
b = priv->data->coef_b;
|
|
m = priv->data->coef_m;
|
|
div = priv->data->coef_div;
|
|
|
|
if (priv->data->inverted)
|
|
*temp = div_s64((m * sample) - b, div);
|
|
else
|
|
*temp = div_s64(b - (m * sample), div);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int armada_get_temp_legacy(struct thermal_zone_device *thermal,
|
|
int *temp)
|
|
{
|
|
struct armada_thermal_priv *priv = thermal_zone_device_priv(thermal);
|
|
int ret;
|
|
|
|
/* Valid check */
|
|
if (!armada_is_valid(priv))
|
|
return -EIO;
|
|
|
|
/* Do the actual reading */
|
|
ret = armada_read_sensor(priv, temp);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct thermal_zone_device_ops legacy_ops = {
|
|
.get_temp = armada_get_temp_legacy,
|
|
};
|
|
|
|
static int armada_get_temp(struct thermal_zone_device *tz, int *temp)
|
|
{
|
|
struct armada_thermal_sensor *sensor = thermal_zone_device_priv(tz);
|
|
struct armada_thermal_priv *priv = sensor->priv;
|
|
int ret;
|
|
|
|
mutex_lock(&priv->update_lock);
|
|
|
|
/* Select the desired channel */
|
|
ret = armada_select_channel(priv, sensor->id);
|
|
if (ret)
|
|
goto unlock_mutex;
|
|
|
|
/* Do the actual reading */
|
|
ret = armada_read_sensor(priv, temp);
|
|
if (ret)
|
|
goto unlock_mutex;
|
|
|
|
/*
|
|
* Select back the interrupt source channel from which a potential
|
|
* critical trip point has been set.
|
|
*/
|
|
ret = armada_select_channel(priv, priv->interrupt_source);
|
|
|
|
unlock_mutex:
|
|
mutex_unlock(&priv->update_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct thermal_zone_device_ops of_ops = {
|
|
.get_temp = armada_get_temp,
|
|
};
|
|
|
|
static unsigned int armada_mc_to_reg_temp(struct armada_thermal_data *data,
|
|
unsigned int temp_mc)
|
|
{
|
|
s64 b = data->coef_b;
|
|
s64 m = data->coef_m;
|
|
s64 div = data->coef_div;
|
|
unsigned int sample;
|
|
|
|
if (data->inverted)
|
|
sample = div_s64(((temp_mc * div) + b), m);
|
|
else
|
|
sample = div_s64((b - (temp_mc * div)), m);
|
|
|
|
return sample & data->temp_mask;
|
|
}
|
|
|
|
/*
|
|
* The documentation states:
|
|
* high/low watermark = threshold +/- 0.4761 * 2^(hysteresis + 2)
|
|
* which is the mathematical derivation for:
|
|
* 0x0 <=> 1.9°C, 0x1 <=> 3.8°C, 0x2 <=> 7.6°C, 0x3 <=> 15.2°C
|
|
*/
|
|
static unsigned int hyst_levels_mc[] = {1900, 3800, 7600, 15200};
|
|
|
|
static unsigned int armada_mc_to_reg_hyst(struct armada_thermal_data *data,
|
|
unsigned int hyst_mc)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* We will always take the smallest possible hysteresis to avoid risking
|
|
* the hardware integrity by enlarging the threshold by +8°C in the
|
|
* worst case.
|
|
*/
|
|
for (i = ARRAY_SIZE(hyst_levels_mc) - 1; i > 0; i--)
|
|
if (hyst_mc >= hyst_levels_mc[i])
|
|
break;
|
|
|
|
return i & data->hyst_mask;
|
|
}
|
|
|
|
static void armada_set_overheat_thresholds(struct armada_thermal_priv *priv,
|
|
int thresh_mc, int hyst_mc)
|
|
{
|
|
struct armada_thermal_data *data = priv->data;
|
|
unsigned int threshold = armada_mc_to_reg_temp(data, thresh_mc);
|
|
unsigned int hysteresis = armada_mc_to_reg_hyst(data, hyst_mc);
|
|
u32 ctrl1;
|
|
|
|
regmap_read(priv->syscon, data->syscon_control1_off, &ctrl1);
|
|
|
|
/* Set Threshold */
|
|
if (thresh_mc >= 0) {
|
|
ctrl1 &= ~(data->temp_mask << data->thresh_shift);
|
|
ctrl1 |= threshold << data->thresh_shift;
|
|
priv->current_threshold = thresh_mc;
|
|
}
|
|
|
|
/* Set Hysteresis */
|
|
if (hyst_mc >= 0) {
|
|
ctrl1 &= ~(data->hyst_mask << data->hyst_shift);
|
|
ctrl1 |= hysteresis << data->hyst_shift;
|
|
priv->current_hysteresis = hyst_mc;
|
|
}
|
|
|
|
regmap_write(priv->syscon, data->syscon_control1_off, ctrl1);
|
|
}
|
|
|
|
static irqreturn_t armada_overheat_isr(int irq, void *blob)
|
|
{
|
|
/*
|
|
* Disable the IRQ and continue in thread context (thermal core
|
|
* notification and temperature monitoring).
|
|
*/
|
|
disable_irq_nosync(irq);
|
|
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
static irqreturn_t armada_overheat_isr_thread(int irq, void *blob)
|
|
{
|
|
struct armada_thermal_priv *priv = blob;
|
|
int low_threshold = priv->current_threshold - priv->current_hysteresis;
|
|
int temperature;
|
|
u32 dummy;
|
|
int ret;
|
|
|
|
/* Notify the core in thread context */
|
|
thermal_zone_device_update(priv->overheat_sensor,
|
|
THERMAL_EVENT_UNSPECIFIED);
|
|
|
|
/*
|
|
* The overheat interrupt must be cleared by reading the DFX interrupt
|
|
* cause _after_ the temperature has fallen down to the low threshold.
|
|
* Otherwise future interrupts might not be served.
|
|
*/
|
|
do {
|
|
msleep(OVERHEAT_INT_POLL_DELAY_MS);
|
|
mutex_lock(&priv->update_lock);
|
|
ret = armada_read_sensor(priv, &temperature);
|
|
mutex_unlock(&priv->update_lock);
|
|
if (ret)
|
|
goto enable_irq;
|
|
} while (temperature >= low_threshold);
|
|
|
|
regmap_read(priv->syscon, priv->data->dfx_irq_cause_off, &dummy);
|
|
|
|
/* Notify the thermal core that the temperature is acceptable again */
|
|
thermal_zone_device_update(priv->overheat_sensor,
|
|
THERMAL_EVENT_UNSPECIFIED);
|
|
|
|
enable_irq:
|
|
enable_irq(irq);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct armada_thermal_data armadaxp_data = {
|
|
.init = armadaxp_init,
|
|
.temp_shift = 10,
|
|
.temp_mask = 0x1ff,
|
|
.coef_b = 3153000000ULL,
|
|
.coef_m = 10000000ULL,
|
|
.coef_div = 13825,
|
|
.syscon_status_off = 0xb0,
|
|
.syscon_control1_off = 0x2d0,
|
|
};
|
|
|
|
static const struct armada_thermal_data armada370_data = {
|
|
.init = armada370_init,
|
|
.is_valid_bit = BIT(9),
|
|
.temp_shift = 10,
|
|
.temp_mask = 0x1ff,
|
|
.coef_b = 3153000000ULL,
|
|
.coef_m = 10000000ULL,
|
|
.coef_div = 13825,
|
|
.syscon_status_off = 0x0,
|
|
.syscon_control1_off = 0x4,
|
|
};
|
|
|
|
static const struct armada_thermal_data armada375_data = {
|
|
.init = armada375_init,
|
|
.is_valid_bit = BIT(10),
|
|
.temp_shift = 0,
|
|
.temp_mask = 0x1ff,
|
|
.coef_b = 3171900000ULL,
|
|
.coef_m = 10000000ULL,
|
|
.coef_div = 13616,
|
|
.syscon_status_off = 0x78,
|
|
.syscon_control0_off = 0x7c,
|
|
.syscon_control1_off = 0x80,
|
|
};
|
|
|
|
static const struct armada_thermal_data armada380_data = {
|
|
.init = armada380_init,
|
|
.is_valid_bit = BIT(10),
|
|
.temp_shift = 0,
|
|
.temp_mask = 0x3ff,
|
|
.coef_b = 1172499100ULL,
|
|
.coef_m = 2000096ULL,
|
|
.coef_div = 4201,
|
|
.inverted = true,
|
|
.syscon_control0_off = 0x70,
|
|
.syscon_control1_off = 0x74,
|
|
.syscon_status_off = 0x78,
|
|
};
|
|
|
|
static const struct armada_thermal_data armada_ap806_data = {
|
|
.init = armada_ap80x_init,
|
|
.is_valid_bit = BIT(16),
|
|
.temp_shift = 0,
|
|
.temp_mask = 0x3ff,
|
|
.thresh_shift = 3,
|
|
.hyst_shift = 19,
|
|
.hyst_mask = 0x3,
|
|
.coef_b = -150000LL,
|
|
.coef_m = 423ULL,
|
|
.coef_div = 1,
|
|
.inverted = true,
|
|
.signed_sample = true,
|
|
.syscon_control0_off = 0x84,
|
|
.syscon_control1_off = 0x88,
|
|
.syscon_status_off = 0x8C,
|
|
.dfx_irq_cause_off = 0x108,
|
|
.dfx_irq_mask_off = 0x10C,
|
|
.dfx_overheat_irq = BIT(22),
|
|
.dfx_server_irq_mask_off = 0x104,
|
|
.dfx_server_irq_en = BIT(1),
|
|
.cpu_nr = 4,
|
|
};
|
|
|
|
static const struct armada_thermal_data armada_ap807_data = {
|
|
.init = armada_ap80x_init,
|
|
.is_valid_bit = BIT(16),
|
|
.temp_shift = 0,
|
|
.temp_mask = 0x3ff,
|
|
.thresh_shift = 3,
|
|
.hyst_shift = 19,
|
|
.hyst_mask = 0x3,
|
|
.coef_b = -128900LL,
|
|
.coef_m = 394ULL,
|
|
.coef_div = 1,
|
|
.inverted = true,
|
|
.signed_sample = true,
|
|
.syscon_control0_off = 0x84,
|
|
.syscon_control1_off = 0x88,
|
|
.syscon_status_off = 0x8C,
|
|
.dfx_irq_cause_off = 0x108,
|
|
.dfx_irq_mask_off = 0x10C,
|
|
.dfx_overheat_irq = BIT(22),
|
|
.dfx_server_irq_mask_off = 0x104,
|
|
.dfx_server_irq_en = BIT(1),
|
|
.cpu_nr = 4,
|
|
};
|
|
|
|
static const struct armada_thermal_data armada_cp110_data = {
|
|
.init = armada_cp110_init,
|
|
.is_valid_bit = BIT(10),
|
|
.temp_shift = 0,
|
|
.temp_mask = 0x3ff,
|
|
.thresh_shift = 16,
|
|
.hyst_shift = 26,
|
|
.hyst_mask = 0x3,
|
|
.coef_b = 1172499100ULL,
|
|
.coef_m = 2000096ULL,
|
|
.coef_div = 4201,
|
|
.inverted = true,
|
|
.syscon_control0_off = 0x70,
|
|
.syscon_control1_off = 0x74,
|
|
.syscon_status_off = 0x78,
|
|
.dfx_irq_cause_off = 0x108,
|
|
.dfx_irq_mask_off = 0x10C,
|
|
.dfx_overheat_irq = BIT(20),
|
|
.dfx_server_irq_mask_off = 0x104,
|
|
.dfx_server_irq_en = BIT(1),
|
|
};
|
|
|
|
static const struct of_device_id armada_thermal_id_table[] = {
|
|
{
|
|
.compatible = "marvell,armadaxp-thermal",
|
|
.data = &armadaxp_data,
|
|
},
|
|
{
|
|
.compatible = "marvell,armada370-thermal",
|
|
.data = &armada370_data,
|
|
},
|
|
{
|
|
.compatible = "marvell,armada375-thermal",
|
|
.data = &armada375_data,
|
|
},
|
|
{
|
|
.compatible = "marvell,armada380-thermal",
|
|
.data = &armada380_data,
|
|
},
|
|
{
|
|
.compatible = "marvell,armada-ap806-thermal",
|
|
.data = &armada_ap806_data,
|
|
},
|
|
{
|
|
.compatible = "marvell,armada-ap807-thermal",
|
|
.data = &armada_ap807_data,
|
|
},
|
|
{
|
|
.compatible = "marvell,armada-cp110-thermal",
|
|
.data = &armada_cp110_data,
|
|
},
|
|
{
|
|
/* sentinel */
|
|
},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, armada_thermal_id_table);
|
|
|
|
static const struct regmap_config armada_thermal_regmap_config = {
|
|
.reg_bits = 32,
|
|
.reg_stride = 4,
|
|
.val_bits = 32,
|
|
.fast_io = true,
|
|
};
|
|
|
|
static int armada_thermal_probe_legacy(struct platform_device *pdev,
|
|
struct armada_thermal_priv *priv)
|
|
{
|
|
struct armada_thermal_data *data = priv->data;
|
|
void __iomem *base;
|
|
|
|
/* First memory region points towards the status register */
|
|
base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
/*
|
|
* Fix up from the old individual DT register specification to
|
|
* cover all the registers. We do this by adjusting the ioremap()
|
|
* result, which should be fine as ioremap() deals with pages.
|
|
* However, validate that we do not cross a page boundary while
|
|
* making this adjustment.
|
|
*/
|
|
if (((unsigned long)base & ~PAGE_MASK) < data->syscon_status_off)
|
|
return -EINVAL;
|
|
base -= data->syscon_status_off;
|
|
|
|
priv->syscon = devm_regmap_init_mmio(&pdev->dev, base,
|
|
&armada_thermal_regmap_config);
|
|
return PTR_ERR_OR_ZERO(priv->syscon);
|
|
}
|
|
|
|
static int armada_thermal_probe_syscon(struct platform_device *pdev,
|
|
struct armada_thermal_priv *priv)
|
|
{
|
|
priv->syscon = syscon_node_to_regmap(pdev->dev.parent->of_node);
|
|
return PTR_ERR_OR_ZERO(priv->syscon);
|
|
}
|
|
|
|
static void armada_set_sane_name(struct platform_device *pdev,
|
|
struct armada_thermal_priv *priv)
|
|
{
|
|
const char *name = dev_name(&pdev->dev);
|
|
char *insane_char;
|
|
|
|
if (strlen(name) > THERMAL_NAME_LENGTH) {
|
|
/*
|
|
* When inside a system controller, the device name has the
|
|
* form: f06f8000.system-controller:ap-thermal so stripping
|
|
* after the ':' should give us a shorter but meaningful name.
|
|
*/
|
|
name = strrchr(name, ':');
|
|
if (!name)
|
|
name = "armada_thermal";
|
|
else
|
|
name++;
|
|
}
|
|
|
|
/* Save the name locally */
|
|
strscpy(priv->zone_name, name, THERMAL_NAME_LENGTH);
|
|
|
|
/* Then check there are no '-' or hwmon core will complain */
|
|
do {
|
|
insane_char = strpbrk(priv->zone_name, "-");
|
|
if (insane_char)
|
|
*insane_char = '_';
|
|
} while (insane_char);
|
|
}
|
|
|
|
/*
|
|
* The IP can manage to trigger interrupts on overheat situation from all the
|
|
* sensors. However, the interrupt source changes along with the last selected
|
|
* source (ie. the last read sensor), which is an inconsistent behavior. Avoid
|
|
* possible glitches by always selecting back only one channel (arbitrarily: the
|
|
* first in the DT which has a critical trip point). We also disable sensor
|
|
* switch during overheat situations.
|
|
*/
|
|
static int armada_configure_overheat_int(struct armada_thermal_priv *priv,
|
|
struct thermal_zone_device *tz,
|
|
int sensor_id)
|
|
{
|
|
/* Retrieve the critical trip point to enable the overheat interrupt */
|
|
int temperature;
|
|
int ret;
|
|
|
|
ret = thermal_zone_get_crit_temp(tz, &temperature);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = armada_select_channel(priv, sensor_id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* A critical temperature does not have a hysteresis
|
|
*/
|
|
armada_set_overheat_thresholds(priv, temperature, 0);
|
|
priv->overheat_sensor = tz;
|
|
priv->interrupt_source = sensor_id;
|
|
armada_enable_overheat_interrupt(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int armada_thermal_probe(struct platform_device *pdev)
|
|
{
|
|
struct thermal_zone_device *tz;
|
|
struct armada_thermal_sensor *sensor;
|
|
struct armada_drvdata *drvdata;
|
|
const struct of_device_id *match;
|
|
struct armada_thermal_priv *priv;
|
|
int sensor_id, irq;
|
|
int ret;
|
|
|
|
match = of_match_device(armada_thermal_id_table, &pdev->dev);
|
|
if (!match)
|
|
return -ENODEV;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
|
|
if (!drvdata)
|
|
return -ENOMEM;
|
|
|
|
priv->dev = &pdev->dev;
|
|
priv->data = (struct armada_thermal_data *)match->data;
|
|
|
|
mutex_init(&priv->update_lock);
|
|
|
|
/*
|
|
* Legacy DT bindings only described "control1" register (also referred
|
|
* as "control MSB" on old documentation). Then, bindings moved to cover
|
|
* "control0/control LSB" and "control1/control MSB" registers within
|
|
* the same resource, which was then of size 8 instead of 4.
|
|
*
|
|
* The logic of defining sporadic registers is broken. For instance, it
|
|
* blocked the addition of the overheat interrupt feature that needed
|
|
* another resource somewhere else in the same memory area. One solution
|
|
* is to define an overall system controller and put the thermal node
|
|
* into it, which requires the use of regmaps across all the driver.
|
|
*/
|
|
if (IS_ERR(syscon_node_to_regmap(pdev->dev.parent->of_node))) {
|
|
/* Ensure device name is correct for the thermal core */
|
|
armada_set_sane_name(pdev, priv);
|
|
|
|
ret = armada_thermal_probe_legacy(pdev, priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->data->init(pdev, priv);
|
|
|
|
/* Wait the sensors to be valid */
|
|
armada_wait_sensor_validity(priv);
|
|
|
|
tz = thermal_zone_device_register(priv->zone_name, 0, 0, priv,
|
|
&legacy_ops, NULL, 0, 0);
|
|
if (IS_ERR(tz)) {
|
|
dev_err(&pdev->dev,
|
|
"Failed to register thermal zone device\n");
|
|
return PTR_ERR(tz);
|
|
}
|
|
|
|
ret = thermal_zone_device_enable(tz);
|
|
if (ret) {
|
|
thermal_zone_device_unregister(tz);
|
|
return ret;
|
|
}
|
|
|
|
drvdata->type = LEGACY;
|
|
drvdata->data.tz = tz;
|
|
platform_set_drvdata(pdev, drvdata);
|
|
|
|
return 0;
|
|
}
|
|
|
|
ret = armada_thermal_probe_syscon(pdev, priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->current_channel = -1;
|
|
priv->data->init(pdev, priv);
|
|
drvdata->type = SYSCON;
|
|
drvdata->data.priv = priv;
|
|
platform_set_drvdata(pdev, drvdata);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq == -EPROBE_DEFER)
|
|
return irq;
|
|
|
|
/* The overheat interrupt feature is not mandatory */
|
|
if (irq > 0) {
|
|
ret = devm_request_threaded_irq(&pdev->dev, irq,
|
|
armada_overheat_isr,
|
|
armada_overheat_isr_thread,
|
|
0, NULL, priv);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Cannot request threaded IRQ %d\n",
|
|
irq);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* There is one channel for the IC and one per CPU (if any), each
|
|
* channel has one sensor.
|
|
*/
|
|
for (sensor_id = 0; sensor_id <= priv->data->cpu_nr; sensor_id++) {
|
|
sensor = devm_kzalloc(&pdev->dev,
|
|
sizeof(struct armada_thermal_sensor),
|
|
GFP_KERNEL);
|
|
if (!sensor)
|
|
return -ENOMEM;
|
|
|
|
/* Register the sensor */
|
|
sensor->priv = priv;
|
|
sensor->id = sensor_id;
|
|
tz = devm_thermal_of_zone_register(&pdev->dev,
|
|
sensor->id, sensor,
|
|
&of_ops);
|
|
if (IS_ERR(tz)) {
|
|
dev_info(&pdev->dev, "Thermal sensor %d unavailable\n",
|
|
sensor_id);
|
|
devm_kfree(&pdev->dev, sensor);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* The first channel that has a critical trip point registered
|
|
* in the DT will serve as interrupt source. Others possible
|
|
* critical trip points will simply be ignored by the driver.
|
|
*/
|
|
if (irq > 0 && !priv->overheat_sensor)
|
|
armada_configure_overheat_int(priv, tz, sensor->id);
|
|
}
|
|
|
|
/* Just complain if no overheat interrupt was set up */
|
|
if (!priv->overheat_sensor)
|
|
dev_warn(&pdev->dev, "Overheat interrupt not available\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int armada_thermal_exit(struct platform_device *pdev)
|
|
{
|
|
struct armada_drvdata *drvdata = platform_get_drvdata(pdev);
|
|
|
|
if (drvdata->type == LEGACY)
|
|
thermal_zone_device_unregister(drvdata->data.tz);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver armada_thermal_driver = {
|
|
.probe = armada_thermal_probe,
|
|
.remove = armada_thermal_exit,
|
|
.driver = {
|
|
.name = "armada_thermal",
|
|
.of_match_table = armada_thermal_id_table,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(armada_thermal_driver);
|
|
|
|
MODULE_AUTHOR("Ezequiel Garcia <ezequiel.garcia@free-electrons.com>");
|
|
MODULE_DESCRIPTION("Marvell EBU Armada SoCs thermal driver");
|
|
MODULE_LICENSE("GPL v2");
|