411 строки
11 KiB
C
411 строки
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright 2020 NXP.
|
|
*
|
|
* Author: Anson Huang <Anson.Huang@nxp.com>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/nvmem-consumer.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/thermal.h>
|
|
|
|
#include "thermal_hwmon.h"
|
|
|
|
#define TER 0x0 /* TMU enable */
|
|
#define TPS 0x4
|
|
#define TRITSR 0x20 /* TMU immediate temp */
|
|
/* TMU calibration data registers */
|
|
#define TASR 0x28
|
|
#define TASR_BUF_SLOPE_MASK GENMASK(19, 16)
|
|
#define TASR_BUF_VREF_MASK GENMASK(4, 0) /* TMU_V1 */
|
|
#define TASR_BUF_VERF_SEL_MASK GENMASK(1, 0) /* TMU_V2 */
|
|
#define TCALIV(n) (0x30 + ((n) * 4))
|
|
#define TCALIV_EN BIT(31)
|
|
#define TCALIV_HR_MASK GENMASK(23, 16) /* TMU_V1 */
|
|
#define TCALIV_RT_MASK GENMASK(7, 0) /* TMU_V1 */
|
|
#define TCALIV_SNSR105C_MASK GENMASK(27, 16) /* TMU_V2 */
|
|
#define TCALIV_SNSR25C_MASK GENMASK(11, 0) /* TMU_V2 */
|
|
#define TRIM 0x3c
|
|
#define TRIM_BJT_CUR_MASK GENMASK(23, 20)
|
|
#define TRIM_BGR_MASK GENMASK(31, 28)
|
|
#define TRIM_VLSB_MASK GENMASK(15, 12)
|
|
#define TRIM_EN_CH BIT(7)
|
|
|
|
#define TER_ADC_PD BIT(30)
|
|
#define TER_EN BIT(31)
|
|
#define TRITSR_TEMP0_VAL_MASK GENMASK(7, 0)
|
|
#define TRITSR_TEMP1_VAL_MASK GENMASK(23, 16)
|
|
|
|
#define PROBE_SEL_ALL GENMASK(31, 30)
|
|
|
|
#define probe_status_offset(x) (30 + x)
|
|
#define SIGN_BIT BIT(7)
|
|
#define TEMP_VAL_MASK GENMASK(6, 0)
|
|
|
|
/* TMU OCOTP calibration data bitfields */
|
|
#define ANA0_EN BIT(25)
|
|
#define ANA0_BUF_VREF_MASK GENMASK(24, 20)
|
|
#define ANA0_BUF_SLOPE_MASK GENMASK(19, 16)
|
|
#define ANA0_HR_MASK GENMASK(15, 8)
|
|
#define ANA0_RT_MASK GENMASK(7, 0)
|
|
#define TRIM2_VLSB_MASK GENMASK(23, 20)
|
|
#define TRIM2_BGR_MASK GENMASK(19, 16)
|
|
#define TRIM2_BJT_CUR_MASK GENMASK(15, 12)
|
|
#define TRIM2_BUF_SLOP_SEL_MASK GENMASK(11, 8)
|
|
#define TRIM2_BUF_VERF_SEL_MASK GENMASK(7, 6)
|
|
#define TRIM3_TCA25_0_LSB_MASK GENMASK(31, 28)
|
|
#define TRIM3_TCA40_0_MASK GENMASK(27, 16)
|
|
#define TRIM4_TCA40_1_MASK GENMASK(31, 20)
|
|
#define TRIM4_TCA105_0_MASK GENMASK(19, 8)
|
|
#define TRIM4_TCA25_0_MSB_MASK GENMASK(7, 0)
|
|
#define TRIM5_TCA105_1_MASK GENMASK(23, 12)
|
|
#define TRIM5_TCA25_1_MASK GENMASK(11, 0)
|
|
|
|
#define VER1_TEMP_LOW_LIMIT 10000
|
|
#define VER2_TEMP_LOW_LIMIT -40000
|
|
#define VER2_TEMP_HIGH_LIMIT 125000
|
|
|
|
#define TMU_VER1 0x1
|
|
#define TMU_VER2 0x2
|
|
|
|
struct thermal_soc_data {
|
|
u32 num_sensors;
|
|
u32 version;
|
|
int (*get_temp)(void *, int *);
|
|
};
|
|
|
|
struct tmu_sensor {
|
|
struct imx8mm_tmu *priv;
|
|
u32 hw_id;
|
|
struct thermal_zone_device *tzd;
|
|
};
|
|
|
|
struct imx8mm_tmu {
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
const struct thermal_soc_data *socdata;
|
|
struct tmu_sensor sensors[];
|
|
};
|
|
|
|
static int imx8mm_tmu_get_temp(void *data, int *temp)
|
|
{
|
|
struct tmu_sensor *sensor = data;
|
|
struct imx8mm_tmu *tmu = sensor->priv;
|
|
u32 val;
|
|
|
|
val = readl_relaxed(tmu->base + TRITSR) & TRITSR_TEMP0_VAL_MASK;
|
|
|
|
/*
|
|
* Do not validate against the V bit (bit 31) due to errata
|
|
* ERR051272: TMU: Bit 31 of registers TMU_TSCR/TMU_TRITSR/TMU_TRATSR invalid
|
|
*/
|
|
|
|
*temp = val * 1000;
|
|
if (*temp < VER1_TEMP_LOW_LIMIT || *temp > VER2_TEMP_HIGH_LIMIT)
|
|
return -EAGAIN;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx8mp_tmu_get_temp(void *data, int *temp)
|
|
{
|
|
struct tmu_sensor *sensor = data;
|
|
struct imx8mm_tmu *tmu = sensor->priv;
|
|
unsigned long val;
|
|
bool ready;
|
|
|
|
val = readl_relaxed(tmu->base + TRITSR);
|
|
ready = test_bit(probe_status_offset(sensor->hw_id), &val);
|
|
if (!ready)
|
|
return -EAGAIN;
|
|
|
|
val = sensor->hw_id ? FIELD_GET(TRITSR_TEMP1_VAL_MASK, val) :
|
|
FIELD_GET(TRITSR_TEMP0_VAL_MASK, val);
|
|
if (val & SIGN_BIT) /* negative */
|
|
val = (~(val & TEMP_VAL_MASK) + 1);
|
|
|
|
*temp = val * 1000;
|
|
if (*temp < VER2_TEMP_LOW_LIMIT || *temp > VER2_TEMP_HIGH_LIMIT)
|
|
return -EAGAIN;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tmu_get_temp(struct thermal_zone_device *tz, int *temp)
|
|
{
|
|
struct tmu_sensor *sensor = thermal_zone_device_priv(tz);
|
|
struct imx8mm_tmu *tmu = sensor->priv;
|
|
|
|
return tmu->socdata->get_temp(sensor, temp);
|
|
}
|
|
|
|
static const struct thermal_zone_device_ops tmu_tz_ops = {
|
|
.get_temp = tmu_get_temp,
|
|
};
|
|
|
|
static void imx8mm_tmu_enable(struct imx8mm_tmu *tmu, bool enable)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl_relaxed(tmu->base + TER);
|
|
val = enable ? (val | TER_EN) : (val & ~TER_EN);
|
|
if (tmu->socdata->version == TMU_VER2)
|
|
val = enable ? (val & ~TER_ADC_PD) : (val | TER_ADC_PD);
|
|
writel_relaxed(val, tmu->base + TER);
|
|
}
|
|
|
|
static void imx8mm_tmu_probe_sel_all(struct imx8mm_tmu *tmu)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl_relaxed(tmu->base + TPS);
|
|
val |= PROBE_SEL_ALL;
|
|
writel_relaxed(val, tmu->base + TPS);
|
|
}
|
|
|
|
static int imx8mm_tmu_probe_set_calib_v1(struct platform_device *pdev,
|
|
struct imx8mm_tmu *tmu)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
u32 ana0;
|
|
int ret;
|
|
|
|
ret = nvmem_cell_read_u32(&pdev->dev, "calib", &ana0);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "Failed to read OCOTP nvmem cell\n");
|
|
|
|
writel(FIELD_PREP(TASR_BUF_VREF_MASK,
|
|
FIELD_GET(ANA0_BUF_VREF_MASK, ana0)) |
|
|
FIELD_PREP(TASR_BUF_SLOPE_MASK,
|
|
FIELD_GET(ANA0_BUF_SLOPE_MASK, ana0)),
|
|
tmu->base + TASR);
|
|
|
|
writel(FIELD_PREP(TCALIV_RT_MASK, FIELD_GET(ANA0_RT_MASK, ana0)) |
|
|
FIELD_PREP(TCALIV_HR_MASK, FIELD_GET(ANA0_HR_MASK, ana0)) |
|
|
((ana0 & ANA0_EN) ? TCALIV_EN : 0),
|
|
tmu->base + TCALIV(0));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx8mm_tmu_probe_set_calib_v2(struct platform_device *pdev,
|
|
struct imx8mm_tmu *tmu)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct nvmem_cell *cell;
|
|
u32 trim[4] = { 0 };
|
|
size_t len;
|
|
void *buf;
|
|
|
|
cell = nvmem_cell_get(dev, "calib");
|
|
if (IS_ERR(cell))
|
|
return PTR_ERR(cell);
|
|
|
|
buf = nvmem_cell_read(cell, &len);
|
|
nvmem_cell_put(cell);
|
|
|
|
if (IS_ERR(buf))
|
|
return PTR_ERR(buf);
|
|
|
|
memcpy(trim, buf, min(len, sizeof(trim)));
|
|
kfree(buf);
|
|
|
|
if (len != 16) {
|
|
dev_err(dev,
|
|
"OCOTP nvmem cell length is %zu, must be 16.\n", len);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Blank sample hardware */
|
|
if (!trim[0] && !trim[1] && !trim[2] && !trim[3]) {
|
|
/* Use a default 25C binary codes */
|
|
writel(FIELD_PREP(TCALIV_SNSR25C_MASK, 0x63c),
|
|
tmu->base + TCALIV(0));
|
|
writel(FIELD_PREP(TCALIV_SNSR25C_MASK, 0x63c),
|
|
tmu->base + TCALIV(1));
|
|
return 0;
|
|
}
|
|
|
|
writel(FIELD_PREP(TASR_BUF_VERF_SEL_MASK,
|
|
FIELD_GET(TRIM2_BUF_VERF_SEL_MASK, trim[0])) |
|
|
FIELD_PREP(TASR_BUF_SLOPE_MASK,
|
|
FIELD_GET(TRIM2_BUF_SLOP_SEL_MASK, trim[0])),
|
|
tmu->base + TASR);
|
|
|
|
writel(FIELD_PREP(TRIM_BJT_CUR_MASK,
|
|
FIELD_GET(TRIM2_BJT_CUR_MASK, trim[0])) |
|
|
FIELD_PREP(TRIM_BGR_MASK, FIELD_GET(TRIM2_BGR_MASK, trim[0])) |
|
|
FIELD_PREP(TRIM_VLSB_MASK, FIELD_GET(TRIM2_VLSB_MASK, trim[0])) |
|
|
TRIM_EN_CH,
|
|
tmu->base + TRIM);
|
|
|
|
writel(FIELD_PREP(TCALIV_SNSR25C_MASK,
|
|
FIELD_GET(TRIM3_TCA25_0_LSB_MASK, trim[1]) |
|
|
(FIELD_GET(TRIM4_TCA25_0_MSB_MASK, trim[2]) << 4)) |
|
|
FIELD_PREP(TCALIV_SNSR105C_MASK,
|
|
FIELD_GET(TRIM4_TCA105_0_MASK, trim[2])),
|
|
tmu->base + TCALIV(0));
|
|
|
|
writel(FIELD_PREP(TCALIV_SNSR25C_MASK,
|
|
FIELD_GET(TRIM5_TCA25_1_MASK, trim[3])) |
|
|
FIELD_PREP(TCALIV_SNSR105C_MASK,
|
|
FIELD_GET(TRIM5_TCA105_1_MASK, trim[3])),
|
|
tmu->base + TCALIV(1));
|
|
|
|
writel(FIELD_PREP(TCALIV_SNSR25C_MASK,
|
|
FIELD_GET(TRIM3_TCA40_0_MASK, trim[1])) |
|
|
FIELD_PREP(TCALIV_SNSR105C_MASK,
|
|
FIELD_GET(TRIM4_TCA40_1_MASK, trim[2])),
|
|
tmu->base + TCALIV(2));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx8mm_tmu_probe_set_calib(struct platform_device *pdev,
|
|
struct imx8mm_tmu *tmu)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
|
|
/*
|
|
* Lack of calibration data OCOTP reference is not considered
|
|
* fatal to retain compatibility with old DTs. It is however
|
|
* strongly recommended to update such old DTs to get correct
|
|
* temperature compensation values for each SoC.
|
|
*/
|
|
if (!of_property_present(pdev->dev.of_node, "nvmem-cells")) {
|
|
dev_warn(dev,
|
|
"No OCOTP nvmem reference found, SoC-specific calibration not loaded. Please update your DT.\n");
|
|
return 0;
|
|
}
|
|
|
|
if (tmu->socdata->version == TMU_VER1)
|
|
return imx8mm_tmu_probe_set_calib_v1(pdev, tmu);
|
|
|
|
return imx8mm_tmu_probe_set_calib_v2(pdev, tmu);
|
|
}
|
|
|
|
static int imx8mm_tmu_probe(struct platform_device *pdev)
|
|
{
|
|
const struct thermal_soc_data *data;
|
|
struct imx8mm_tmu *tmu;
|
|
int ret;
|
|
int i;
|
|
|
|
data = of_device_get_match_data(&pdev->dev);
|
|
|
|
tmu = devm_kzalloc(&pdev->dev, struct_size(tmu, sensors,
|
|
data->num_sensors), GFP_KERNEL);
|
|
if (!tmu)
|
|
return -ENOMEM;
|
|
|
|
tmu->socdata = data;
|
|
|
|
tmu->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(tmu->base))
|
|
return PTR_ERR(tmu->base);
|
|
|
|
tmu->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(tmu->clk))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(tmu->clk),
|
|
"failed to get tmu clock\n");
|
|
|
|
ret = clk_prepare_enable(tmu->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to enable tmu clock: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* disable the monitor during initialization */
|
|
imx8mm_tmu_enable(tmu, false);
|
|
|
|
for (i = 0; i < data->num_sensors; i++) {
|
|
tmu->sensors[i].priv = tmu;
|
|
tmu->sensors[i].tzd =
|
|
devm_thermal_of_zone_register(&pdev->dev, i,
|
|
&tmu->sensors[i],
|
|
&tmu_tz_ops);
|
|
if (IS_ERR(tmu->sensors[i].tzd)) {
|
|
ret = PTR_ERR(tmu->sensors[i].tzd);
|
|
dev_err(&pdev->dev,
|
|
"failed to register thermal zone sensor[%d]: %d\n",
|
|
i, ret);
|
|
goto disable_clk;
|
|
}
|
|
tmu->sensors[i].hw_id = i;
|
|
|
|
devm_thermal_add_hwmon_sysfs(&pdev->dev, tmu->sensors[i].tzd);
|
|
}
|
|
|
|
platform_set_drvdata(pdev, tmu);
|
|
|
|
ret = imx8mm_tmu_probe_set_calib(pdev, tmu);
|
|
if (ret)
|
|
goto disable_clk;
|
|
|
|
/* enable all the probes for V2 TMU */
|
|
if (tmu->socdata->version == TMU_VER2)
|
|
imx8mm_tmu_probe_sel_all(tmu);
|
|
|
|
/* enable the monitor */
|
|
imx8mm_tmu_enable(tmu, true);
|
|
|
|
return 0;
|
|
|
|
disable_clk:
|
|
clk_disable_unprepare(tmu->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int imx8mm_tmu_remove(struct platform_device *pdev)
|
|
{
|
|
struct imx8mm_tmu *tmu = platform_get_drvdata(pdev);
|
|
|
|
/* disable TMU */
|
|
imx8mm_tmu_enable(tmu, false);
|
|
|
|
clk_disable_unprepare(tmu->clk);
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct thermal_soc_data imx8mm_tmu_data = {
|
|
.num_sensors = 1,
|
|
.version = TMU_VER1,
|
|
.get_temp = imx8mm_tmu_get_temp,
|
|
};
|
|
|
|
static struct thermal_soc_data imx8mp_tmu_data = {
|
|
.num_sensors = 2,
|
|
.version = TMU_VER2,
|
|
.get_temp = imx8mp_tmu_get_temp,
|
|
};
|
|
|
|
static const struct of_device_id imx8mm_tmu_table[] = {
|
|
{ .compatible = "fsl,imx8mm-tmu", .data = &imx8mm_tmu_data, },
|
|
{ .compatible = "fsl,imx8mp-tmu", .data = &imx8mp_tmu_data, },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, imx8mm_tmu_table);
|
|
|
|
static struct platform_driver imx8mm_tmu = {
|
|
.driver = {
|
|
.name = "i.mx8mm_thermal",
|
|
.of_match_table = imx8mm_tmu_table,
|
|
},
|
|
.probe = imx8mm_tmu_probe,
|
|
.remove = imx8mm_tmu_remove,
|
|
};
|
|
module_platform_driver(imx8mm_tmu);
|
|
|
|
MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
|
|
MODULE_DESCRIPTION("i.MX8MM Thermal Monitor Unit driver");
|
|
MODULE_LICENSE("GPL v2");
|