567 строки
14 KiB
C
567 строки
14 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* TI Bandgap temperature sensor driver for J72XX SoC Family
|
|
*
|
|
* Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
|
|
*/
|
|
|
|
#include <linux/math.h>
|
|
#include <linux/math64.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/err.h>
|
|
#include <linux/types.h>
|
|
#include <linux/io.h>
|
|
#include <linux/thermal.h>
|
|
#include <linux/of.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define K3_VTM_DEVINFO_PWR0_OFFSET 0x4
|
|
#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK 0xf0
|
|
#define K3_VTM_TMPSENS0_CTRL_OFFSET 0x300
|
|
#define K3_VTM_MISC_CTRL_OFFSET 0xc
|
|
#define K3_VTM_TMPSENS_STAT_OFFSET 0x8
|
|
#define K3_VTM_ANYMAXT_OUTRG_ALERT_EN 0x1
|
|
#define K3_VTM_MISC_CTRL2_OFFSET 0x10
|
|
#define K3_VTM_TS_STAT_DTEMP_MASK 0x3ff
|
|
#define K3_VTM_MAX_NUM_TS 8
|
|
#define K3_VTM_TMPSENS_CTRL_SOC BIT(5)
|
|
#define K3_VTM_TMPSENS_CTRL_CLRZ BIT(6)
|
|
#define K3_VTM_TMPSENS_CTRL_CLKON_REQ BIT(7)
|
|
#define K3_VTM_TMPSENS_CTRL_MAXT_OUTRG_EN BIT(11)
|
|
|
|
#define K3_VTM_CORRECTION_TEMP_CNT 3
|
|
|
|
#define MINUS40CREF 5
|
|
#define PLUS30CREF 253
|
|
#define PLUS125CREF 730
|
|
#define PLUS150CREF 940
|
|
|
|
#define TABLE_SIZE 1024
|
|
#define MAX_TEMP 123000
|
|
#define COOL_DOWN_TEMP 105000
|
|
|
|
#define FACTORS_REDUCTION 13
|
|
static int *derived_table;
|
|
|
|
static int compute_value(int index, const s64 *factors, int nr_factors,
|
|
int reduction)
|
|
{
|
|
s64 value = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < nr_factors; i++)
|
|
value += factors[i] * int_pow(index, i);
|
|
|
|
return (int)div64_s64(value, int_pow(10, reduction));
|
|
}
|
|
|
|
static void init_table(int factors_size, int *table, const s64 *factors)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < TABLE_SIZE; i++)
|
|
table[i] = compute_value(i, factors, factors_size,
|
|
FACTORS_REDUCTION);
|
|
}
|
|
|
|
/**
|
|
* struct err_values - structure containing error/reference values
|
|
* @refs: reference error values for -40C, 30C, 125C & 150C
|
|
* @errs: Actual error values for -40C, 30C, 125C & 150C read from the efuse
|
|
*/
|
|
struct err_values {
|
|
int refs[4];
|
|
int errs[4];
|
|
};
|
|
|
|
static void create_table_segments(struct err_values *err_vals, int seg,
|
|
int *ref_table)
|
|
{
|
|
int m = 0, c, num, den, i, err, idx1, idx2, err1, err2, ref1, ref2;
|
|
|
|
if (seg == 0)
|
|
idx1 = 0;
|
|
else
|
|
idx1 = err_vals->refs[seg];
|
|
|
|
idx2 = err_vals->refs[seg + 1];
|
|
err1 = err_vals->errs[seg];
|
|
err2 = err_vals->errs[seg + 1];
|
|
ref1 = err_vals->refs[seg];
|
|
ref2 = err_vals->refs[seg + 1];
|
|
|
|
/*
|
|
* Calculate the slope with adc values read from the register
|
|
* as the y-axis param and err in adc value as x-axis param
|
|
*/
|
|
num = ref2 - ref1;
|
|
den = err2 - err1;
|
|
if (den)
|
|
m = num / den;
|
|
c = ref2 - m * err2;
|
|
|
|
/*
|
|
* Take care of divide by zero error if error values are same
|
|
* Or when the slope is 0
|
|
*/
|
|
if (den != 0 && m != 0) {
|
|
for (i = idx1; i <= idx2; i++) {
|
|
err = (i - c) / m;
|
|
if (((i + err) < 0) || ((i + err) >= TABLE_SIZE))
|
|
continue;
|
|
derived_table[i] = ref_table[i + err];
|
|
}
|
|
} else { /* Constant error take care of divide by zero */
|
|
for (i = idx1; i <= idx2; i++) {
|
|
if (((i + err1) < 0) || ((i + err1) >= TABLE_SIZE))
|
|
continue;
|
|
derived_table[i] = ref_table[i + err1];
|
|
}
|
|
}
|
|
}
|
|
|
|
static int prep_lookup_table(struct err_values *err_vals, int *ref_table)
|
|
{
|
|
int inc, i, seg;
|
|
|
|
/*
|
|
* Fill up the lookup table under 3 segments
|
|
* region -40C to +30C
|
|
* region +30C to +125C
|
|
* region +125C to +150C
|
|
*/
|
|
for (seg = 0; seg < 3; seg++)
|
|
create_table_segments(err_vals, seg, ref_table);
|
|
|
|
/* Get to the first valid temperature */
|
|
i = 0;
|
|
while (!derived_table[i])
|
|
i++;
|
|
|
|
/*
|
|
* Get to the last zero index and back fill the temperature for
|
|
* sake of continuity
|
|
*/
|
|
if (i) {
|
|
/* 300 milli celsius steps */
|
|
while (i--)
|
|
derived_table[i] = derived_table[i + 1] - 300;
|
|
}
|
|
|
|
/*
|
|
* Fill the last trailing 0s which are unfilled with increments of
|
|
* 100 milli celsius till 1023 code
|
|
*/
|
|
i = TABLE_SIZE - 1;
|
|
while (!derived_table[i])
|
|
i--;
|
|
|
|
i++;
|
|
inc = 1;
|
|
while (i < TABLE_SIZE) {
|
|
derived_table[i] = derived_table[i - 1] + inc * 100;
|
|
i++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct k3_thermal_data;
|
|
|
|
struct k3_j72xx_bandgap {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
void __iomem *cfg2_base;
|
|
struct k3_thermal_data *ts_data[K3_VTM_MAX_NUM_TS];
|
|
};
|
|
|
|
/* common data structures */
|
|
struct k3_thermal_data {
|
|
struct k3_j72xx_bandgap *bgp;
|
|
u32 ctrl_offset;
|
|
u32 stat_offset;
|
|
};
|
|
|
|
static int two_cmp(int tmp, int mask)
|
|
{
|
|
tmp = ~(tmp);
|
|
tmp &= mask;
|
|
tmp += 1;
|
|
|
|
/* Return negative value */
|
|
return (0 - tmp);
|
|
}
|
|
|
|
static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1,
|
|
unsigned int s2)
|
|
{
|
|
int d01 = abs(s0 - s1);
|
|
int d02 = abs(s0 - s2);
|
|
int d12 = abs(s1 - s2);
|
|
|
|
if (d01 <= d02 && d01 <= d12)
|
|
return (s0 + s1) / 2;
|
|
|
|
if (d02 <= d01 && d02 <= d12)
|
|
return (s0 + s2) / 2;
|
|
|
|
return (s1 + s2) / 2;
|
|
}
|
|
|
|
static inline int k3_bgp_read_temp(struct k3_thermal_data *devdata,
|
|
int *temp)
|
|
{
|
|
struct k3_j72xx_bandgap *bgp;
|
|
unsigned int dtemp, s0, s1, s2;
|
|
|
|
bgp = devdata->bgp;
|
|
/*
|
|
* Errata is applicable for am654 pg 1.0 silicon/J7ES. There
|
|
* is a variation of the order for certain degree centigrade on AM654.
|
|
* Work around that by getting the average of two closest
|
|
* readings out of three readings everytime we want to
|
|
* report temperatures.
|
|
*
|
|
* Errata workaround.
|
|
*/
|
|
s0 = readl(bgp->base + devdata->stat_offset) &
|
|
K3_VTM_TS_STAT_DTEMP_MASK;
|
|
s1 = readl(bgp->base + devdata->stat_offset) &
|
|
K3_VTM_TS_STAT_DTEMP_MASK;
|
|
s2 = readl(bgp->base + devdata->stat_offset) &
|
|
K3_VTM_TS_STAT_DTEMP_MASK;
|
|
dtemp = vtm_get_best_value(s0, s1, s2);
|
|
|
|
if (dtemp < 0 || dtemp >= TABLE_SIZE)
|
|
return -EINVAL;
|
|
|
|
*temp = derived_table[dtemp];
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Get temperature callback function for thermal zone */
|
|
static int k3_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
|
|
{
|
|
return k3_bgp_read_temp(thermal_zone_device_priv(tz), temp);
|
|
}
|
|
|
|
static const struct thermal_zone_device_ops k3_of_thermal_ops = {
|
|
.get_temp = k3_thermal_get_temp,
|
|
};
|
|
|
|
static int k3_j72xx_bandgap_temp_to_adc_code(int temp)
|
|
{
|
|
int low = 0, high = TABLE_SIZE - 1, mid;
|
|
|
|
if (temp > 160000 || temp < -50000)
|
|
return -EINVAL;
|
|
|
|
/* Binary search to find the adc code */
|
|
while (low < (high - 1)) {
|
|
mid = (low + high) / 2;
|
|
if (temp <= derived_table[mid])
|
|
high = mid;
|
|
else
|
|
low = mid;
|
|
}
|
|
|
|
return mid;
|
|
}
|
|
|
|
static void get_efuse_values(int id, struct k3_thermal_data *data, int *err,
|
|
void __iomem *fuse_base)
|
|
{
|
|
int i, tmp, pow;
|
|
int ct_offsets[5][K3_VTM_CORRECTION_TEMP_CNT] = {
|
|
{ 0x0, 0x8, 0x4 },
|
|
{ 0x0, 0x8, 0x4 },
|
|
{ 0x0, -1, 0x4 },
|
|
{ 0x0, 0xC, -1 },
|
|
{ 0x0, 0xc, 0x8 }
|
|
};
|
|
int ct_bm[5][K3_VTM_CORRECTION_TEMP_CNT] = {
|
|
{ 0x3f, 0x1fe000, 0x1ff },
|
|
{ 0xfc0, 0x1fe000, 0x3fe00 },
|
|
{ 0x3f000, 0x7f800000, 0x7fc0000 },
|
|
{ 0xfc0000, 0x1fe0, 0x1f800000 },
|
|
{ 0x3f000000, 0x1fe000, 0x1ff0 }
|
|
};
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
/* Extract the offset value using bit-mask */
|
|
if (ct_offsets[id][i] == -1 && i == 1) {
|
|
/* 25C offset Case of Sensor 2 split between 2 regs */
|
|
tmp = (readl(fuse_base + 0x8) & 0xE0000000) >> (29);
|
|
tmp |= ((readl(fuse_base + 0xC) & 0x1F) << 3);
|
|
pow = tmp & 0x80;
|
|
} else if (ct_offsets[id][i] == -1 && i == 2) {
|
|
/* 125C Case of Sensor 3 split between 2 regs */
|
|
tmp = (readl(fuse_base + 0x4) & 0xF8000000) >> (27);
|
|
tmp |= ((readl(fuse_base + 0x8) & 0xF) << 5);
|
|
pow = tmp & 0x100;
|
|
} else {
|
|
tmp = readl(fuse_base + ct_offsets[id][i]);
|
|
tmp &= ct_bm[id][i];
|
|
tmp = tmp >> __ffs(ct_bm[id][i]);
|
|
|
|
/* Obtain the sign bit pow*/
|
|
pow = ct_bm[id][i] >> __ffs(ct_bm[id][i]);
|
|
pow += 1;
|
|
pow /= 2;
|
|
}
|
|
|
|
/* Check for negative value */
|
|
if (tmp & pow) {
|
|
/* 2's complement value */
|
|
tmp = two_cmp(tmp, ct_bm[id][i] >> __ffs(ct_bm[id][i]));
|
|
}
|
|
err[i] = tmp;
|
|
}
|
|
|
|
/* Err value for 150C is set to 0 */
|
|
err[i] = 0;
|
|
}
|
|
|
|
static void print_look_up_table(struct device *dev, int *ref_table)
|
|
{
|
|
int i;
|
|
|
|
dev_dbg(dev, "The contents of derived array\n");
|
|
dev_dbg(dev, "Code Temperature\n");
|
|
for (i = 0; i < TABLE_SIZE; i++)
|
|
dev_dbg(dev, "%d %d %d\n", i, derived_table[i], ref_table[i]);
|
|
}
|
|
|
|
struct k3_j72xx_bandgap_data {
|
|
const bool has_errata_i2128;
|
|
};
|
|
|
|
static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
|
|
{
|
|
int ret = 0, cnt, val, id;
|
|
int high_max, low_temp;
|
|
struct resource *res;
|
|
struct device *dev = &pdev->dev;
|
|
struct k3_j72xx_bandgap *bgp;
|
|
struct k3_thermal_data *data;
|
|
bool workaround_needed = false;
|
|
const struct k3_j72xx_bandgap_data *driver_data;
|
|
struct thermal_zone_device *ti_thermal;
|
|
int *ref_table;
|
|
struct err_values err_vals;
|
|
void __iomem *fuse_base;
|
|
|
|
const s64 golden_factors[] = {
|
|
-490019999999999936,
|
|
3251200000000000,
|
|
-1705800000000,
|
|
603730000,
|
|
-92627,
|
|
};
|
|
|
|
const s64 pvt_wa_factors[] = {
|
|
-415230000000000000,
|
|
3126600000000000,
|
|
-1157800000000,
|
|
};
|
|
|
|
bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
|
|
if (!bgp)
|
|
return -ENOMEM;
|
|
|
|
bgp->dev = dev;
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
bgp->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(bgp->base))
|
|
return PTR_ERR(bgp->base);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
bgp->cfg2_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(bgp->cfg2_base))
|
|
return PTR_ERR(bgp->cfg2_base);
|
|
|
|
driver_data = of_device_get_match_data(dev);
|
|
if (driver_data)
|
|
workaround_needed = driver_data->has_errata_i2128;
|
|
|
|
/*
|
|
* Some of TI's J721E SoCs require a software trimming procedure
|
|
* for the temperature monitors to function properly. To determine
|
|
* if this particular SoC is NOT affected, both bits in the
|
|
* WKUP_SPARE_FUSE0[31:30] will be set (0xC0000000) indicating
|
|
* when software trimming should NOT be applied.
|
|
*
|
|
* https://www.ti.com/lit/er/sprz455c/sprz455c.pdf
|
|
*/
|
|
if (workaround_needed) {
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
|
|
fuse_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(fuse_base))
|
|
return PTR_ERR(fuse_base);
|
|
|
|
if ((readl(fuse_base) & 0xc0000000) == 0xc0000000)
|
|
workaround_needed = false;
|
|
}
|
|
|
|
dev_dbg(bgp->dev, "Work around %sneeded\n",
|
|
workaround_needed ? "" : "not ");
|
|
|
|
pm_runtime_enable(dev);
|
|
ret = pm_runtime_get_sync(dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(dev);
|
|
pm_runtime_disable(dev);
|
|
return ret;
|
|
}
|
|
|
|
/* Get the sensor count in the VTM */
|
|
val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET);
|
|
cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK;
|
|
cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK);
|
|
|
|
data = devm_kcalloc(bgp->dev, cnt, sizeof(*data), GFP_KERNEL);
|
|
if (!data) {
|
|
ret = -ENOMEM;
|
|
goto err_alloc;
|
|
}
|
|
|
|
ref_table = kzalloc(sizeof(*ref_table) * TABLE_SIZE, GFP_KERNEL);
|
|
if (!ref_table) {
|
|
ret = -ENOMEM;
|
|
goto err_alloc;
|
|
}
|
|
|
|
derived_table = devm_kzalloc(bgp->dev, sizeof(*derived_table) * TABLE_SIZE,
|
|
GFP_KERNEL);
|
|
if (!derived_table) {
|
|
ret = -ENOMEM;
|
|
goto err_free_ref_table;
|
|
}
|
|
|
|
if (!workaround_needed)
|
|
init_table(5, ref_table, golden_factors);
|
|
else
|
|
init_table(3, ref_table, pvt_wa_factors);
|
|
|
|
/* Register the thermal sensors */
|
|
for (id = 0; id < cnt; id++) {
|
|
data[id].bgp = bgp;
|
|
data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET + id * 0x20;
|
|
data[id].stat_offset = data[id].ctrl_offset +
|
|
K3_VTM_TMPSENS_STAT_OFFSET;
|
|
|
|
if (workaround_needed) {
|
|
/* ref adc values for -40C, 30C & 125C respectively */
|
|
err_vals.refs[0] = MINUS40CREF;
|
|
err_vals.refs[1] = PLUS30CREF;
|
|
err_vals.refs[2] = PLUS125CREF;
|
|
err_vals.refs[3] = PLUS150CREF;
|
|
get_efuse_values(id, &data[id], err_vals.errs, fuse_base);
|
|
}
|
|
|
|
if (id == 0 && workaround_needed)
|
|
prep_lookup_table(&err_vals, ref_table);
|
|
else if (id == 0 && !workaround_needed)
|
|
memcpy(derived_table, ref_table, TABLE_SIZE * 4);
|
|
|
|
val = readl(data[id].bgp->cfg2_base + data[id].ctrl_offset);
|
|
val |= (K3_VTM_TMPSENS_CTRL_MAXT_OUTRG_EN |
|
|
K3_VTM_TMPSENS_CTRL_SOC |
|
|
K3_VTM_TMPSENS_CTRL_CLRZ | BIT(4));
|
|
writel(val, data[id].bgp->cfg2_base + data[id].ctrl_offset);
|
|
|
|
bgp->ts_data[id] = &data[id];
|
|
ti_thermal = devm_thermal_of_zone_register(bgp->dev, id, &data[id],
|
|
&k3_of_thermal_ops);
|
|
if (IS_ERR(ti_thermal)) {
|
|
dev_err(bgp->dev, "thermal zone device is NULL\n");
|
|
ret = PTR_ERR(ti_thermal);
|
|
goto err_free_ref_table;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Program TSHUT thresholds
|
|
* Step 1: set the thresholds to ~123C and 105C WKUP_VTM_MISC_CTRL2
|
|
* Step 2: WKUP_VTM_TMPSENS_CTRL_j set the MAXT_OUTRG_EN bit
|
|
* This is already taken care as per of init
|
|
* Step 3: WKUP_VTM_MISC_CTRL set the ANYMAXT_OUTRG_ALERT_EN bit
|
|
*/
|
|
high_max = k3_j72xx_bandgap_temp_to_adc_code(MAX_TEMP);
|
|
low_temp = k3_j72xx_bandgap_temp_to_adc_code(COOL_DOWN_TEMP);
|
|
|
|
writel((low_temp << 16) | high_max, data[0].bgp->cfg2_base +
|
|
K3_VTM_MISC_CTRL2_OFFSET);
|
|
mdelay(100);
|
|
writel(K3_VTM_ANYMAXT_OUTRG_ALERT_EN, data[0].bgp->cfg2_base +
|
|
K3_VTM_MISC_CTRL_OFFSET);
|
|
|
|
print_look_up_table(dev, ref_table);
|
|
/*
|
|
* Now that the derived_table has the appropriate look up values
|
|
* Free up the ref_table
|
|
*/
|
|
kfree(ref_table);
|
|
|
|
return 0;
|
|
|
|
err_free_ref_table:
|
|
kfree(ref_table);
|
|
|
|
err_alloc:
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int k3_j72xx_bandgap_remove(struct platform_device *pdev)
|
|
{
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j721e_data = {
|
|
.has_errata_i2128 = true,
|
|
};
|
|
|
|
static const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j7200_data = {
|
|
.has_errata_i2128 = false,
|
|
};
|
|
|
|
static const struct of_device_id of_k3_j72xx_bandgap_match[] = {
|
|
{
|
|
.compatible = "ti,j721e-vtm",
|
|
.data = &k3_j72xx_bandgap_j721e_data,
|
|
},
|
|
{
|
|
.compatible = "ti,j7200-vtm",
|
|
.data = &k3_j72xx_bandgap_j7200_data,
|
|
},
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, of_k3_j72xx_bandgap_match);
|
|
|
|
static struct platform_driver k3_j72xx_bandgap_sensor_driver = {
|
|
.probe = k3_j72xx_bandgap_probe,
|
|
.remove = k3_j72xx_bandgap_remove,
|
|
.driver = {
|
|
.name = "k3-j72xx-soc-thermal",
|
|
.of_match_table = of_k3_j72xx_bandgap_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(k3_j72xx_bandgap_sensor_driver);
|
|
|
|
MODULE_DESCRIPTION("K3 bandgap temperature sensor driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
|