WSL2-Linux-Kernel/drivers/cpufreq/imx6q-cpufreq.c

369 строки
9.8 KiB
C

/*
* Copyright (C) 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/cpu.h>
#include <linux/cpufreq.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pm_opp.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#define PU_SOC_VOLTAGE_NORMAL 1250000
#define PU_SOC_VOLTAGE_HIGH 1275000
#define FREQ_1P2_GHZ 1200000000
static struct regulator *arm_reg;
static struct regulator *pu_reg;
static struct regulator *soc_reg;
static struct clk *arm_clk;
static struct clk *pll1_sys_clk;
static struct clk *pll1_sw_clk;
static struct clk *step_clk;
static struct clk *pll2_pfd2_396m_clk;
static struct device *cpu_dev;
static bool free_opp;
static struct cpufreq_frequency_table *freq_table;
static unsigned int transition_latency;
static u32 *imx6_soc_volt;
static u32 soc_opp_count;
static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
{
struct dev_pm_opp *opp;
unsigned long freq_hz, volt, volt_old;
unsigned int old_freq, new_freq;
int ret;
new_freq = freq_table[index].frequency;
freq_hz = new_freq * 1000;
old_freq = clk_get_rate(arm_clk) / 1000;
rcu_read_lock();
opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz);
if (IS_ERR(opp)) {
rcu_read_unlock();
dev_err(cpu_dev, "failed to find OPP for %ld\n", freq_hz);
return PTR_ERR(opp);
}
volt = dev_pm_opp_get_voltage(opp);
rcu_read_unlock();
volt_old = regulator_get_voltage(arm_reg);
dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n",
old_freq / 1000, volt_old / 1000,
new_freq / 1000, volt / 1000);
/* scaling up? scale voltage before frequency */
if (new_freq > old_freq) {
if (!IS_ERR(pu_reg)) {
ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0);
if (ret) {
dev_err(cpu_dev, "failed to scale vddpu up: %d\n", ret);
return ret;
}
}
ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0);
if (ret) {
dev_err(cpu_dev, "failed to scale vddsoc up: %d\n", ret);
return ret;
}
ret = regulator_set_voltage_tol(arm_reg, volt, 0);
if (ret) {
dev_err(cpu_dev,
"failed to scale vddarm up: %d\n", ret);
return ret;
}
}
/*
* The setpoints are selected per PLL/PDF frequencies, so we need to
* reprogram PLL for frequency scaling. The procedure of reprogramming
* PLL1 is as below.
*
* - Enable pll2_pfd2_396m_clk and reparent pll1_sw_clk to it
* - Reprogram pll1_sys_clk and reparent pll1_sw_clk back to it
* - Disable pll2_pfd2_396m_clk
*/
clk_set_parent(step_clk, pll2_pfd2_396m_clk);
clk_set_parent(pll1_sw_clk, step_clk);
if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) {
clk_set_rate(pll1_sys_clk, new_freq * 1000);
clk_set_parent(pll1_sw_clk, pll1_sys_clk);
}
/* Ensure the arm clock divider is what we expect */
ret = clk_set_rate(arm_clk, new_freq * 1000);
if (ret) {
dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
regulator_set_voltage_tol(arm_reg, volt_old, 0);
return ret;
}
/* scaling down? scale voltage after frequency */
if (new_freq < old_freq) {
ret = regulator_set_voltage_tol(arm_reg, volt, 0);
if (ret) {
dev_warn(cpu_dev,
"failed to scale vddarm down: %d\n", ret);
ret = 0;
}
ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0);
if (ret) {
dev_warn(cpu_dev, "failed to scale vddsoc down: %d\n", ret);
ret = 0;
}
if (!IS_ERR(pu_reg)) {
ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0);
if (ret) {
dev_warn(cpu_dev, "failed to scale vddpu down: %d\n", ret);
ret = 0;
}
}
}
return 0;
}
static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
{
policy->clk = arm_clk;
return cpufreq_generic_init(policy, freq_table, transition_latency);
}
static struct cpufreq_driver imx6q_cpufreq_driver = {
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = imx6q_set_target,
.get = cpufreq_generic_get,
.init = imx6q_cpufreq_init,
.name = "imx6q-cpufreq",
.attr = cpufreq_generic_attr,
};
static int imx6q_cpufreq_probe(struct platform_device *pdev)
{
struct device_node *np;
struct dev_pm_opp *opp;
unsigned long min_volt, max_volt;
int num, ret;
const struct property *prop;
const __be32 *val;
u32 nr, i, j;
cpu_dev = get_cpu_device(0);
if (!cpu_dev) {
pr_err("failed to get cpu0 device\n");
return -ENODEV;
}
np = of_node_get(cpu_dev->of_node);
if (!np) {
dev_err(cpu_dev, "failed to find cpu0 node\n");
return -ENOENT;
}
arm_clk = clk_get(cpu_dev, "arm");
pll1_sys_clk = clk_get(cpu_dev, "pll1_sys");
pll1_sw_clk = clk_get(cpu_dev, "pll1_sw");
step_clk = clk_get(cpu_dev, "step");
pll2_pfd2_396m_clk = clk_get(cpu_dev, "pll2_pfd2_396m");
if (IS_ERR(arm_clk) || IS_ERR(pll1_sys_clk) || IS_ERR(pll1_sw_clk) ||
IS_ERR(step_clk) || IS_ERR(pll2_pfd2_396m_clk)) {
dev_err(cpu_dev, "failed to get clocks\n");
ret = -ENOENT;
goto put_clk;
}
arm_reg = regulator_get(cpu_dev, "arm");
pu_reg = regulator_get_optional(cpu_dev, "pu");
soc_reg = regulator_get(cpu_dev, "soc");
if (IS_ERR(arm_reg) || IS_ERR(soc_reg)) {
dev_err(cpu_dev, "failed to get regulators\n");
ret = -ENOENT;
goto put_reg;
}
/*
* We expect an OPP table supplied by platform.
* Just, incase the platform did not supply the OPP
* table, it will try to get it.
*/
num = dev_pm_opp_get_opp_count(cpu_dev);
if (num < 0) {
ret = of_init_opp_table(cpu_dev);
if (ret < 0) {
dev_err(cpu_dev, "failed to init OPP table: %d\n", ret);
goto put_reg;
}
/* Because we have added the OPPs here, we must free them */
free_opp = true;
num = dev_pm_opp_get_opp_count(cpu_dev);
if (num < 0) {
ret = num;
dev_err(cpu_dev, "no OPP table is found: %d\n", ret);
goto out_free_opp;
}
}
ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
if (ret) {
dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
goto put_reg;
}
/* Make imx6_soc_volt array's size same as arm opp number */
imx6_soc_volt = devm_kzalloc(cpu_dev, sizeof(*imx6_soc_volt) * num, GFP_KERNEL);
if (imx6_soc_volt == NULL) {
ret = -ENOMEM;
goto free_freq_table;
}
prop = of_find_property(np, "fsl,soc-operating-points", NULL);
if (!prop || !prop->value)
goto soc_opp_out;
/*
* Each OPP is a set of tuples consisting of frequency and
* voltage like <freq-kHz vol-uV>.
*/
nr = prop->length / sizeof(u32);
if (nr % 2 || (nr / 2) < num)
goto soc_opp_out;
for (j = 0; j < num; j++) {
val = prop->value;
for (i = 0; i < nr / 2; i++) {
unsigned long freq = be32_to_cpup(val++);
unsigned long volt = be32_to_cpup(val++);
if (freq_table[j].frequency == freq) {
imx6_soc_volt[soc_opp_count++] = volt;
break;
}
}
}
soc_opp_out:
/* use fixed soc opp volt if no valid soc opp info found in dtb */
if (soc_opp_count != num) {
dev_warn(cpu_dev, "can NOT find valid fsl,soc-operating-points property in dtb, use default value!\n");
for (j = 0; j < num; j++)
imx6_soc_volt[j] = PU_SOC_VOLTAGE_NORMAL;
if (freq_table[num - 1].frequency * 1000 == FREQ_1P2_GHZ)
imx6_soc_volt[num - 1] = PU_SOC_VOLTAGE_HIGH;
}
if (of_property_read_u32(np, "clock-latency", &transition_latency))
transition_latency = CPUFREQ_ETERNAL;
/*
* Calculate the ramp time for max voltage change in the
* VDDSOC and VDDPU regulators.
*/
ret = regulator_set_voltage_time(soc_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]);
if (ret > 0)
transition_latency += ret * 1000;
if (!IS_ERR(pu_reg)) {
ret = regulator_set_voltage_time(pu_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]);
if (ret > 0)
transition_latency += ret * 1000;
}
/*
* OPP is maintained in order of increasing frequency, and
* freq_table initialised from OPP is therefore sorted in the
* same order.
*/
rcu_read_lock();
opp = dev_pm_opp_find_freq_exact(cpu_dev,
freq_table[0].frequency * 1000, true);
min_volt = dev_pm_opp_get_voltage(opp);
opp = dev_pm_opp_find_freq_exact(cpu_dev,
freq_table[--num].frequency * 1000, true);
max_volt = dev_pm_opp_get_voltage(opp);
rcu_read_unlock();
ret = regulator_set_voltage_time(arm_reg, min_volt, max_volt);
if (ret > 0)
transition_latency += ret * 1000;
ret = cpufreq_register_driver(&imx6q_cpufreq_driver);
if (ret) {
dev_err(cpu_dev, "failed register driver: %d\n", ret);
goto free_freq_table;
}
of_node_put(np);
return 0;
free_freq_table:
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
out_free_opp:
if (free_opp)
of_free_opp_table(cpu_dev);
put_reg:
if (!IS_ERR(arm_reg))
regulator_put(arm_reg);
if (!IS_ERR(pu_reg))
regulator_put(pu_reg);
if (!IS_ERR(soc_reg))
regulator_put(soc_reg);
put_clk:
if (!IS_ERR(arm_clk))
clk_put(arm_clk);
if (!IS_ERR(pll1_sys_clk))
clk_put(pll1_sys_clk);
if (!IS_ERR(pll1_sw_clk))
clk_put(pll1_sw_clk);
if (!IS_ERR(step_clk))
clk_put(step_clk);
if (!IS_ERR(pll2_pfd2_396m_clk))
clk_put(pll2_pfd2_396m_clk);
of_node_put(np);
return ret;
}
static int imx6q_cpufreq_remove(struct platform_device *pdev)
{
cpufreq_unregister_driver(&imx6q_cpufreq_driver);
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
if (free_opp)
of_free_opp_table(cpu_dev);
regulator_put(arm_reg);
if (!IS_ERR(pu_reg))
regulator_put(pu_reg);
regulator_put(soc_reg);
clk_put(arm_clk);
clk_put(pll1_sys_clk);
clk_put(pll1_sw_clk);
clk_put(step_clk);
clk_put(pll2_pfd2_396m_clk);
return 0;
}
static struct platform_driver imx6q_cpufreq_platdrv = {
.driver = {
.name = "imx6q-cpufreq",
},
.probe = imx6q_cpufreq_probe,
.remove = imx6q_cpufreq_remove,
};
module_platform_driver(imx6q_cpufreq_platdrv);
MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
MODULE_DESCRIPTION("Freescale i.MX6Q cpufreq driver");
MODULE_LICENSE("GPL");