WSL2-Linux-Kernel/drivers/usb
Alan Stern 79bcf7b02b USB: EHCI: change return value of qh_completions()
This patch (as1658) cleans up the usage of qh_completions() in
ehci-hcd.  Currently the function's return value indicates whether any
URBs were given back; the idea was that the caller can scan the QH
over again to handle any URBs that were dequeued by a completion
handler.  This is not necessary; when qh_completions() is ready to
give back dequeued URBs, it does its own rescanning.

Therefore the new return value will be a flag indicating whether the
caller needs to unlink the QH.  This is more convenient than forcing
the caller to check qh->needs_rescan, and it makes a lot more sense --
why should "needs_rescan" imply that an unlink is needed?  The callers
are also changed to remove the unneeded rescans.

Lastly, the check for whether qh->qtd_list is non-empty is removed
from the start of qh_completions().  Two of the callers have to make
this test anyway, so the same test can simply be added to the other
two callers.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25 13:35:05 -07:00
..
atm Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq 2012-10-02 09:54:49 -07:00
c67x00 usb: c67x00 RetryCnt value in c67x00 TD should be 3 2013-03-07 12:31:37 +08:00
chipidea Merge branch 'usb-linus' into usb-next 2013-03-20 16:21:47 -07:00
class USB: cdc-wdm: implement IOCTL_WDM_MAX_COMMAND 2013-03-25 13:32:20 -07:00
core USB: hub: Avoid NULL pointer dereference when hub doesn't have any ports 2013-03-25 10:57:37 -07:00
dwc3 usb: dwc3: ep0: fix sparc64 build 2013-03-08 09:42:50 +02:00
early fix build of EHCI debug port code when USB_CHIPIDEA but !USB_EHCI_HCD 2012-11-02 10:13:33 -07:00
gadget usb: fixes for v3.9-rc4 2013-03-21 08:40:22 -07:00
host USB: EHCI: change return value of qh_completions() 2013-03-25 13:35:05 -07:00
image USB: mdc800.c: remove dbg() usage 2012-05-01 21:33:50 -07:00
misc usb: misc: sisusbvga: Avoid NULL pointer dereference from sisusb 2013-03-15 11:51:01 -07:00
mon mm: kill vma flag VM_RESERVED and mm->reserved_vm counter 2012-10-09 16:22:19 +09:00
musb usb: fixes for v3.9-rc4 2013-03-21 08:40:22 -07:00
otg Merge branch 'usb-linus' into usb-next 2013-03-20 16:21:47 -07:00
phy Merge branch 'usb-linus' into usb-next 2013-03-20 16:21:47 -07:00
renesas_usbhs USB patches for 3.9-rc1 2013-02-21 12:20:00 -08:00
serial USB: serial: comments on suspend failure 2013-03-25 10:55:46 -07:00
storage Merge branch 'usb-linus' into usb-next 2013-03-20 16:21:47 -07:00
wusbcore USB: wusbcore/wa-xfer: error handling fixes in setup_segs() 2013-02-06 11:38:14 -08:00
Kconfig USB: select USB_ARCH_HAS_EHCI for MXS 2013-01-11 16:01:06 -08:00
Makefile usb: Makefile: fix drivers/usb/phy/ Makefile entry 2013-03-07 12:29:09 +08:00
README
usb-common.c
usb-skeleton.c USB: usb-skeleton.c: fix blocked forever in skel_read 2013-03-25 13:32:20 -07:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.