WSL2-Linux-Kernel/include/asm-blackfin/cplbinit.h

204 строки
5.0 KiB
C

/*
* File: include/asm-blackfin/cplbinit.h
* Based on:
* Author:
*
* Created:
* Description:
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <asm/blackfin.h>
#include <asm/cplb.h>
#define INITIAL_T 0x1
#define SWITCH_T 0x2
#define I_CPLB 0x4
#define D_CPLB 0x8
#define IN_KERNEL 1
enum
{ZERO_P, L1I_MEM, L1D_MEM, SDRAM_KERN , SDRAM_RAM_MTD, SDRAM_DMAZ, RES_MEM, ASYNC_MEM, L2_MEM};
struct cplb_desc {
u32 start; /* start address */
u32 end; /* end address */
u32 psize; /* prefered size if any otherwise 1MB or 4MB*/
u16 attr;/* attributes */
u16 i_conf;/* I-CPLB DATA */
u16 d_conf;/* D-CPLB DATA */
u16 valid;/* valid */
const s8 name[30];/* name */
};
struct cplb_tab {
u_long *tab;
u16 pos;
u16 size;
};
u_long icplb_table[MAX_CPLBS+1];
u_long dcplb_table[MAX_CPLBS+1];
/* Till here we are discussing about the static memory management model.
* However, the operating envoronments commonly define more CPLB
* descriptors to cover the entire addressable memory than will fit into
* the available on-chip 16 CPLB MMRs. When this happens, the below table
* will be used which will hold all the potentially required CPLB descriptors
*
* This is how Page descriptor Table is implemented in uClinux/Blackfin.
*/
#ifdef CONFIG_CPLB_SWITCH_TAB_L1
u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]__attribute__((l1_data));
u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]__attribute__((l1_data));
#ifdef CONFIG_CPLB_INFO
u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]__attribute__((l1_data));
u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]__attribute__((l1_data));
#endif /* CONFIG_CPLB_INFO */
#else
u_long ipdt_table[MAX_SWITCH_I_CPLBS+1];
u_long dpdt_table[MAX_SWITCH_D_CPLBS+1];
#ifdef CONFIG_CPLB_INFO
u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS];
u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS];
#endif /* CONFIG_CPLB_INFO */
#endif /*CONFIG_CPLB_SWITCH_TAB_L1*/
struct s_cplb {
struct cplb_tab init_i;
struct cplb_tab init_d;
struct cplb_tab switch_i;
struct cplb_tab switch_d;
};
#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
static struct cplb_desc cplb_data[] = {
{
.start = 0,
.end = SIZE_4K,
.psize = SIZE_4K,
.attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB,
.i_conf = SDRAM_OOPS,
.d_conf = SDRAM_OOPS,
#if defined(CONFIG_DEBUG_HUNT_FOR_ZERO)
.valid = 1,
#else
.valid = 0,
#endif
.name = "ZERO Pointer Saveguard",
},
{
.start = L1_CODE_START,
.end = L1_CODE_START + L1_CODE_LENGTH,
.psize = SIZE_4M,
.attr = INITIAL_T | SWITCH_T | I_CPLB,
.i_conf = L1_IMEMORY,
.d_conf = 0,
.valid = 1,
.name = "L1 I-Memory",
},
{
.start = L1_DATA_A_START,
.end = L1_DATA_B_START + L1_DATA_B_LENGTH,
.psize = SIZE_4M,
.attr = INITIAL_T | SWITCH_T | D_CPLB,
.i_conf = 0,
.d_conf = L1_DMEMORY,
#if ((L1_DATA_A_LENGTH > 0) || (L1_DATA_B_LENGTH > 0))
.valid = 1,
#else
.valid = 0,
#endif
.name = "L1 D-Memory",
},
{
.start = 0,
.end = 0, /* dynamic */
.psize = 0,
.attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB,
.i_conf = SDRAM_IGENERIC,
.d_conf = SDRAM_DGENERIC,
.valid = 1,
.name = "SDRAM Kernel",
},
{
.start = 0, /* dynamic */
.end = 0, /* dynamic */
.psize = 0,
.attr = INITIAL_T | SWITCH_T | D_CPLB,
.i_conf = SDRAM_IGENERIC,
.d_conf = SDRAM_DNON_CHBL,
.valid = 1,
.name = "SDRAM RAM MTD",
},
{
.start = 0, /* dynamic */
.end = 0, /* dynamic */
.psize = SIZE_1M,
.attr = INITIAL_T | SWITCH_T | D_CPLB,
.d_conf = SDRAM_DNON_CHBL,
.valid = 1,//(DMA_UNCACHED_REGION > 0),
.name = "SDRAM Uncached DMA ZONE",
},
{
.start = 0, /* dynamic */
.end = 0, /* dynamic */
.psize = 0,
.attr = SWITCH_T | D_CPLB,
.i_conf = 0, /* dynamic */
.d_conf = 0, /* dynamic */
.valid = 1,
.name = "SDRAM Reserved Memory",
},
{
.start = ASYNC_BANK0_BASE,
.end = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE,
.psize = 0,
.attr = SWITCH_T | D_CPLB,
.d_conf = SDRAM_EBIU,
.valid = 1,
.name = "ASYNC Memory",
},
{
#if defined(CONFIG_BF561)
.start = L2_SRAM,
.end = L2_SRAM_END,
.psize = SIZE_1M,
.attr = SWITCH_T | D_CPLB,
.i_conf = L2_MEMORY,
.d_conf = L2_MEMORY,
.valid = 1,
#else
.valid = 0,
#endif
.name = "L2 Memory",
}
};
#endif