309 строки
8.4 KiB
C
309 строки
8.4 KiB
C
/*
|
|
*
|
|
* BRIEF MODULE DESCRIPTION
|
|
* IT8172 IDE controller support
|
|
*
|
|
* Copyright 2000 MontaVista Software Inc.
|
|
* Author: MontaVista Software, Inc.
|
|
* stevel@mvista.com or source@mvista.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/it8172/it8172_int.h>
|
|
|
|
/*
|
|
* Prototypes
|
|
*/
|
|
static u8 it8172_ratemask (ide_drive_t *drive)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static void it8172_tune_drive (ide_drive_t *drive, u8 pio)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
int is_slave = (&hwif->drives[1] == drive);
|
|
unsigned long flags;
|
|
u16 drive_enables;
|
|
u32 drive_timing;
|
|
|
|
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
|
|
spin_lock_irqsave(&ide_lock, flags);
|
|
pci_read_config_word(dev, 0x40, &drive_enables);
|
|
pci_read_config_dword(dev, 0x44, &drive_timing);
|
|
|
|
/*
|
|
* FIX! The DIOR/DIOW pulse width and recovery times in port 0x44
|
|
* are being left at the default values of 8 PCI clocks (242 nsec
|
|
* for a 33 MHz clock). These can be safely shortened at higher
|
|
* PIO modes. The DIOR/DIOW pulse width and recovery times only
|
|
* apply to PIO modes, not to the DMA modes.
|
|
*/
|
|
|
|
/*
|
|
* Enable port 0x44. The IT8172G spec is confused; it calls
|
|
* this register the "Slave IDE Timing Register", but in fact,
|
|
* it controls timing for both master and slave drives.
|
|
*/
|
|
drive_enables |= 0x4000;
|
|
|
|
if (is_slave) {
|
|
drive_enables &= 0xc006;
|
|
if (pio > 1)
|
|
/* enable prefetch and IORDY sample-point */
|
|
drive_enables |= 0x0060;
|
|
} else {
|
|
drive_enables &= 0xc060;
|
|
if (pio > 1)
|
|
/* enable prefetch and IORDY sample-point */
|
|
drive_enables |= 0x0006;
|
|
}
|
|
|
|
pci_write_config_word(dev, 0x40, drive_enables);
|
|
spin_unlock_irqrestore(&ide_lock, flags);
|
|
}
|
|
|
|
static u8 it8172_dma_2_pio (u8 xfer_rate)
|
|
{
|
|
switch(xfer_rate) {
|
|
case XFER_UDMA_5:
|
|
case XFER_UDMA_4:
|
|
case XFER_UDMA_3:
|
|
case XFER_UDMA_2:
|
|
case XFER_UDMA_1:
|
|
case XFER_UDMA_0:
|
|
case XFER_MW_DMA_2:
|
|
case XFER_PIO_4:
|
|
return 4;
|
|
case XFER_MW_DMA_1:
|
|
case XFER_PIO_3:
|
|
return 3;
|
|
case XFER_SW_DMA_2:
|
|
case XFER_PIO_2:
|
|
return 2;
|
|
case XFER_MW_DMA_0:
|
|
case XFER_SW_DMA_1:
|
|
case XFER_SW_DMA_0:
|
|
case XFER_PIO_1:
|
|
case XFER_PIO_0:
|
|
case XFER_PIO_SLOW:
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int it8172_tune_chipset (ide_drive_t *drive, u8 xferspeed)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
u8 speed = ide_rate_filter(it8172_ratemask(drive), xferspeed);
|
|
int a_speed = 3 << (drive->dn * 4);
|
|
int u_flag = 1 << drive->dn;
|
|
int u_speed = 0;
|
|
u8 reg48, reg4a;
|
|
|
|
pci_read_config_byte(dev, 0x48, ®48);
|
|
pci_read_config_byte(dev, 0x4a, ®4a);
|
|
|
|
/*
|
|
* Setting the DMA cycle time to 2 or 3 PCI clocks (60 and 91 nsec
|
|
* at 33 MHz PCI clock) seems to cause BadCRC errors during DMA
|
|
* transfers on some drives, even though both numbers meet the minimum
|
|
* ATAPI-4 spec of 73 and 54 nsec for UDMA 1 and 2 respectively.
|
|
* So the faster times are just commented out here. The good news is
|
|
* that the slower cycle time has very little affect on transfer
|
|
* performance.
|
|
*/
|
|
|
|
switch(speed) {
|
|
case XFER_UDMA_4:
|
|
case XFER_UDMA_2: //u_speed = 2 << (drive->dn * 4); break;
|
|
case XFER_UDMA_5:
|
|
case XFER_UDMA_3:
|
|
case XFER_UDMA_1: //u_speed = 1 << (drive->dn * 4); break;
|
|
case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
|
|
case XFER_MW_DMA_2:
|
|
case XFER_MW_DMA_1:
|
|
case XFER_MW_DMA_0:
|
|
case XFER_SW_DMA_2: break;
|
|
case XFER_PIO_4:
|
|
case XFER_PIO_3:
|
|
case XFER_PIO_2:
|
|
case XFER_PIO_0: break;
|
|
default: return -1;
|
|
}
|
|
|
|
if (speed >= XFER_UDMA_0) {
|
|
pci_write_config_byte(dev, 0x48, reg48 | u_flag);
|
|
reg4a &= ~a_speed;
|
|
pci_write_config_byte(dev, 0x4a, reg4a | u_speed);
|
|
} else {
|
|
pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
|
|
pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed);
|
|
}
|
|
|
|
it8172_tune_drive(drive, it8172_dma_2_pio(speed));
|
|
return (ide_config_drive_speed(drive, speed));
|
|
}
|
|
|
|
static int it8172_config_chipset_for_dma (ide_drive_t *drive)
|
|
{
|
|
u8 speed = ide_dma_speed(drive, it8172_ratemask(drive));
|
|
|
|
if (!(speed)) {
|
|
u8 tspeed = ide_get_best_pio_mode(drive, 255, 4, NULL);
|
|
speed = it8172_dma_2_pio(XFER_PIO_0 + tspeed);
|
|
}
|
|
|
|
(void) it8172_tune_chipset(drive, speed);
|
|
return ide_dma_enable(drive);
|
|
}
|
|
|
|
static int it8172_config_drive_xfer_rate (ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct hd_driveid *id = drive->id;
|
|
|
|
drive->init_speed = 0;
|
|
|
|
if (id && (id->capability & 1) && drive->autodma) {
|
|
|
|
if (ide_use_dma(drive)) {
|
|
if (it8172_config_chipset_for_dma(drive))
|
|
return hwif->ide_dma_on(drive);
|
|
}
|
|
|
|
goto fast_ata_pio;
|
|
|
|
} else if ((id->capability & 8) || (id->field_valid & 2)) {
|
|
fast_ata_pio:
|
|
it8172_tune_drive(drive, 5);
|
|
return hwif->ide_dma_off_quietly(drive);
|
|
}
|
|
/* IORDY not supported */
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int __init init_chipset_it8172 (struct pci_dev *dev, const char *name)
|
|
{
|
|
unsigned char progif;
|
|
|
|
/*
|
|
* Place both IDE interfaces into PCI "native" mode
|
|
*/
|
|
pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
|
|
pci_write_config_byte(dev, PCI_CLASS_PROG, progif | 0x05);
|
|
|
|
return IT8172_IDE_IRQ;
|
|
}
|
|
|
|
|
|
static void __init init_hwif_it8172 (ide_hwif_t *hwif)
|
|
{
|
|
struct pci_dev* dev = hwif->pci_dev;
|
|
unsigned long cmdBase, ctrlBase;
|
|
|
|
hwif->autodma = 0;
|
|
hwif->tuneproc = &it8172_tune_drive;
|
|
hwif->speedproc = &it8172_tune_chipset;
|
|
|
|
cmdBase = dev->resource[0].start;
|
|
ctrlBase = dev->resource[1].start;
|
|
|
|
ide_init_hwif_ports(&hwif->hw, cmdBase, ctrlBase | 2, NULL);
|
|
memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
|
|
hwif->noprobe = 0;
|
|
|
|
if (!hwif->dma_base) {
|
|
hwif->drives[0].autotune = 1;
|
|
hwif->drives[1].autotune = 1;
|
|
return;
|
|
}
|
|
|
|
hwif->atapi_dma = 1;
|
|
hwif->ultra_mask = 0x07;
|
|
hwif->mwdma_mask = 0x06;
|
|
hwif->swdma_mask = 0x04;
|
|
|
|
hwif->ide_dma_check = &it8172_config_drive_xfer_rate;
|
|
if (!noautodma)
|
|
hwif->autodma = 1;
|
|
hwif->drives[0].autodma = hwif->autodma;
|
|
hwif->drives[1].autodma = hwif->autodma;
|
|
}
|
|
|
|
static ide_pci_device_t it8172_chipsets[] __devinitdata = {
|
|
{ /* 0 */
|
|
.name = "IT8172G",
|
|
.init_chipset = init_chipset_it8172,
|
|
.init_hwif = init_hwif_it8172,
|
|
.channels = 2,
|
|
.autodma = AUTODMA,
|
|
.enablebits = {{0x00,0x00,0x00}, {0x40,0x00,0x01}},
|
|
.bootable = ON_BOARD,
|
|
}
|
|
};
|
|
|
|
static int __devinit it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
if ((!(PCI_FUNC(dev->devfn) & 1) ||
|
|
(!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE))))
|
|
return -ENODEV; /* IT8172 is more than an IDE controller */
|
|
return ide_setup_pci_device(dev, &it8172_chipsets[id->driver_data]);
|
|
}
|
|
|
|
static struct pci_device_id it8172_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, it8172_pci_tbl);
|
|
|
|
static struct pci_driver driver = {
|
|
.name = "IT8172_IDE",
|
|
.id_table = it8172_pci_tbl,
|
|
.probe = it8172_init_one,
|
|
};
|
|
|
|
static int it8172_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&driver);
|
|
}
|
|
|
|
module_init(it8172_ide_init);
|
|
|
|
MODULE_AUTHOR("SteveL@mvista.com");
|
|
MODULE_DESCRIPTION("PCI driver module for ITE 8172 IDE");
|
|
MODULE_LICENSE("GPL");
|