WSL2-Linux-Kernel/include/media/v4l2-mc.h

244 строки
8.0 KiB
C

/*
* v4l2-mc.h - Media Controller V4L2 types and prototypes
*
* Copyright (C) 2016 Mauro Carvalho Chehab <mchehab@kernel.org>
* Copyright (C) 2006-2010 Nokia Corporation
* Copyright (c) 2016 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _V4L2_MC_H
#define _V4L2_MC_H
#include <media/media-device.h>
#include <media/v4l2-dev.h>
#include <linux/types.h>
/**
* enum tuner_pad_index - tuner pad index for MEDIA_ENT_F_TUNER
*
* @TUNER_PAD_RF_INPUT: Radiofrequency (RF) sink pad, usually linked to a
* RF connector entity.
* @TUNER_PAD_OUTPUT: Tuner video output source pad. Contains the video
* chrominance and luminance or the hole bandwidth
* of the signal converted to an Intermediate Frequency
* (IF) or to baseband (on zero-IF tuners).
* @TUNER_PAD_AUD_OUT: Tuner audio output source pad. Tuners used to decode
* analog TV signals have an extra pad for audio output.
* Old tuners use an analog stage with a saw filter for
* the audio IF frequency. The output of the pad is, in
* this case, the audio IF, with should be decoded either
* by the bridge chipset (that's the case of cx2388x
* chipsets) or may require an external IF sound
* processor, like msp34xx. On modern silicon tuners,
* the audio IF decoder is usually incorporated at the
* tuner. On such case, the output of this pad is an
* audio sampled data.
* @TUNER_NUM_PADS: Number of pads of the tuner.
*/
enum tuner_pad_index {
TUNER_PAD_RF_INPUT,
TUNER_PAD_OUTPUT,
TUNER_PAD_AUD_OUT,
TUNER_NUM_PADS
};
/**
* enum if_vid_dec_index - video IF-PLL pad index for
* MEDIA_ENT_F_IF_VID_DECODER
*
* @IF_VID_DEC_PAD_IF_INPUT: video Intermediate Frequency (IF) sink pad
* @IF_VID_DEC_PAD_OUT: IF-PLL video output source pad. Contains the
* video chrominance and luminance IF signals.
* @IF_VID_DEC_PAD_NUM_PADS: Number of pads of the video IF-PLL.
*/
enum if_vid_dec_pad_index {
IF_VID_DEC_PAD_IF_INPUT,
IF_VID_DEC_PAD_OUT,
IF_VID_DEC_PAD_NUM_PADS
};
/**
* enum if_aud_dec_index - audio/sound IF-PLL pad index for
* MEDIA_ENT_F_IF_AUD_DECODER
*
* @IF_AUD_DEC_PAD_IF_INPUT: audio Intermediate Frequency (IF) sink pad
* @IF_AUD_DEC_PAD_OUT: IF-PLL audio output source pad. Contains the
* audio sampled stream data, usually connected
* to the bridge bus via an Inter-IC Sound (I2S)
* bus.
* @IF_AUD_DEC_PAD_NUM_PADS: Number of pads of the audio IF-PLL.
*/
enum if_aud_dec_pad_index {
IF_AUD_DEC_PAD_IF_INPUT,
IF_AUD_DEC_PAD_OUT,
IF_AUD_DEC_PAD_NUM_PADS
};
/**
* enum demod_pad_index - analog TV pad index for MEDIA_ENT_F_ATV_DECODER
*
* @DEMOD_PAD_IF_INPUT: IF input sink pad.
* @DEMOD_PAD_VID_OUT: Video output source pad.
* @DEMOD_PAD_VBI_OUT: Vertical Blank Interface (VBI) output source pad.
* @DEMOD_PAD_AUDIO_OUT: Audio output source pad.
* @DEMOD_NUM_PADS: Maximum number of output pads.
*/
enum demod_pad_index {
DEMOD_PAD_IF_INPUT,
DEMOD_PAD_VID_OUT,
DEMOD_PAD_VBI_OUT,
DEMOD_PAD_AUDIO_OUT,
DEMOD_NUM_PADS
};
/* We don't need to include pci.h or usb.h here */
struct pci_dev;
struct usb_device;
#ifdef CONFIG_MEDIA_CONTROLLER
/**
* v4l2_mc_create_media_graph() - create Media Controller links at the graph.
*
* @mdev: pointer to the &media_device struct.
*
* Add links between the entities commonly found on PC customer's hardware at
* the V4L2 side: camera sensors, audio and video PLL-IF decoders, tuners,
* analog TV decoder and I/O entities (video, VBI and Software Defined Radio).
* NOTE: webcams are modelled on a very simple way: the sensor is
* connected directly to the I/O entity. All dirty details, like
* scaler and crop HW are hidden. While such mapping is enough for v4l2
* interface centric PC-consumer's hardware, V4L2 subdev centric camera
* hardware should not use this routine, as it will not build the right graph.
*/
int v4l2_mc_create_media_graph(struct media_device *mdev);
/**
* v4l_enable_media_source() - Hold media source for exclusive use
* if free
*
* @vdev: pointer to struct video_device
*
* This interface calls enable_source handler to determine if
* media source is free for use. The enable_source handler is
* responsible for checking is the media source is free and
* start a pipeline between the media source and the media
* entity associated with the video device. This interface
* should be called from v4l2-core and dvb-core interfaces
* that change the source configuration.
*
* Return: returns zero on success or a negative error code.
*/
int v4l_enable_media_source(struct video_device *vdev);
/**
* v4l_disable_media_source() - Release media source
*
* @vdev: pointer to struct video_device
*
* This interface calls disable_source handler to release
* the media source. The disable_source handler stops the
* active media pipeline between the media source and the
* media entity associated with the video device.
*
* Return: returns zero on success or a negative error code.
*/
void v4l_disable_media_source(struct video_device *vdev);
/*
* v4l_vb2q_enable_media_tuner - Hold media source for exclusive use
* if free.
* @q - pointer to struct vb2_queue
*
* Wrapper for v4l_enable_media_source(). This function should
* be called from v4l2-core to enable the media source with
* pointer to struct vb2_queue as the input argument. Some
* v4l2-core interfaces don't have access to video device and
* this interface finds the struct video_device for the q and
* calls v4l_enable_media_source().
*/
int v4l_vb2q_enable_media_source(struct vb2_queue *q);
/**
* v4l2_pipeline_pm_use - Update the use count of an entity
* @entity: The entity
* @use: Use (1) or stop using (0) the entity
*
* Update the use count of all entities in the pipeline and power entities on or
* off accordingly.
*
* This function is intended to be called in video node open (use ==
* 1) and release (use == 0). It uses struct media_entity.use_count to
* track the power status. The use of this function should be paired
* with v4l2_pipeline_link_notify().
*
* Return 0 on success or a negative error code on failure. Powering entities
* off is assumed to never fail. No failure can occur when the use parameter is
* set to 0.
*/
int v4l2_pipeline_pm_use(struct media_entity *entity, int use);
/**
* v4l2_pipeline_link_notify - Link management notification callback
* @link: The link
* @flags: New link flags that will be applied
* @notification: The link's state change notification type (MEDIA_DEV_NOTIFY_*)
*
* React to link management on powered pipelines by updating the use count of
* all entities in the source and sink sides of the link. Entities are powered
* on or off accordingly. The use of this function should be paired
* with v4l2_pipeline_pm_use().
*
* Return 0 on success or a negative error code on failure. Powering entities
* off is assumed to never fail. This function will not fail for disconnection
* events.
*/
int v4l2_pipeline_link_notify(struct media_link *link, u32 flags,
unsigned int notification);
#else /* CONFIG_MEDIA_CONTROLLER */
static inline int v4l2_mc_create_media_graph(struct media_device *mdev)
{
return 0;
}
static inline int v4l_enable_media_source(struct video_device *vdev)
{
return 0;
}
static inline void v4l_disable_media_source(struct video_device *vdev)
{
}
static inline int v4l_vb2q_enable_media_source(struct vb2_queue *q)
{
return 0;
}
static inline int v4l2_pipeline_pm_use(struct media_entity *entity, int use)
{
return 0;
}
static inline int v4l2_pipeline_link_notify(struct media_link *link, u32 flags,
unsigned int notification)
{
return 0;
}
#endif /* CONFIG_MEDIA_CONTROLLER */
#endif /* _V4L2_MC_H */