454 строки
12 KiB
C
454 строки
12 KiB
C
/*
|
|
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
|
|
* Copyright (C) 2006-2007 MontaVista Software, Inc.
|
|
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
|
|
*
|
|
* Portions Copyright (C) 1999 Promise Technology, Inc.
|
|
* Author: Frank Tiernan (frankt@promise.com)
|
|
* Released under terms of General Public License
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ide.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#define DRV_NAME "pdc202xx_old"
|
|
|
|
#define PDC202XX_DEBUG_DRIVE_INFO 0
|
|
|
|
static const char *pdc_quirk_drives[] = {
|
|
"QUANTUM FIREBALLlct08 08",
|
|
"QUANTUM FIREBALLP KA6.4",
|
|
"QUANTUM FIREBALLP KA9.1",
|
|
"QUANTUM FIREBALLP LM20.4",
|
|
"QUANTUM FIREBALLP KX13.6",
|
|
"QUANTUM FIREBALLP KX20.5",
|
|
"QUANTUM FIREBALLP KX27.3",
|
|
"QUANTUM FIREBALLP LM20.5",
|
|
NULL
|
|
};
|
|
|
|
static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
|
|
|
|
static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
|
u8 drive_pci = 0x60 + (drive->dn << 2);
|
|
|
|
u8 AP = 0, BP = 0, CP = 0;
|
|
u8 TA = 0, TB = 0, TC = 0;
|
|
|
|
#if PDC202XX_DEBUG_DRIVE_INFO
|
|
u32 drive_conf = 0;
|
|
pci_read_config_dword(dev, drive_pci, &drive_conf);
|
|
#endif
|
|
|
|
/*
|
|
* TODO: do this once per channel
|
|
*/
|
|
if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
|
|
pdc_old_disable_66MHz_clock(hwif);
|
|
|
|
pci_read_config_byte(dev, drive_pci, &AP);
|
|
pci_read_config_byte(dev, drive_pci + 1, &BP);
|
|
pci_read_config_byte(dev, drive_pci + 2, &CP);
|
|
|
|
switch(speed) {
|
|
case XFER_UDMA_5:
|
|
case XFER_UDMA_4: TB = 0x20; TC = 0x01; break;
|
|
case XFER_UDMA_2: TB = 0x20; TC = 0x01; break;
|
|
case XFER_UDMA_3:
|
|
case XFER_UDMA_1: TB = 0x40; TC = 0x02; break;
|
|
case XFER_UDMA_0:
|
|
case XFER_MW_DMA_2: TB = 0x60; TC = 0x03; break;
|
|
case XFER_MW_DMA_1: TB = 0x60; TC = 0x04; break;
|
|
case XFER_MW_DMA_0: TB = 0xE0; TC = 0x0F; break;
|
|
case XFER_PIO_4: TA = 0x01; TB = 0x04; break;
|
|
case XFER_PIO_3: TA = 0x02; TB = 0x06; break;
|
|
case XFER_PIO_2: TA = 0x03; TB = 0x08; break;
|
|
case XFER_PIO_1: TA = 0x05; TB = 0x0C; break;
|
|
case XFER_PIO_0:
|
|
default: TA = 0x09; TB = 0x13; break;
|
|
}
|
|
|
|
if (speed < XFER_SW_DMA_0) {
|
|
/*
|
|
* preserve SYNC_INT / ERDDY_EN bits while clearing
|
|
* Prefetch_EN / IORDY_EN / PA[3:0] bits of register A
|
|
*/
|
|
AP &= ~0x3f;
|
|
if (ata_id_iordy_disable(drive->id))
|
|
AP |= 0x20; /* set IORDY_EN bit */
|
|
if (drive->media == ide_disk)
|
|
AP |= 0x10; /* set Prefetch_EN bit */
|
|
/* clear PB[4:0] bits of register B */
|
|
BP &= ~0x1f;
|
|
pci_write_config_byte(dev, drive_pci, AP | TA);
|
|
pci_write_config_byte(dev, drive_pci + 1, BP | TB);
|
|
} else {
|
|
/* clear MB[2:0] bits of register B */
|
|
BP &= ~0xe0;
|
|
/* clear MC[3:0] bits of register C */
|
|
CP &= ~0x0f;
|
|
pci_write_config_byte(dev, drive_pci + 1, BP | TB);
|
|
pci_write_config_byte(dev, drive_pci + 2, CP | TC);
|
|
}
|
|
|
|
#if PDC202XX_DEBUG_DRIVE_INFO
|
|
printk(KERN_DEBUG "%s: %s drive%d 0x%08x ",
|
|
drive->name, ide_xfer_verbose(speed),
|
|
drive->dn, drive_conf);
|
|
pci_read_config_dword(dev, drive_pci, &drive_conf);
|
|
printk("0x%08x\n", drive_conf);
|
|
#endif
|
|
}
|
|
|
|
static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
|
|
{
|
|
pdc202xx_set_mode(drive, XFER_PIO_0 + pio);
|
|
}
|
|
|
|
static u8 pdc2026x_cable_detect(ide_hwif_t *hwif)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
|
u16 CIS, mask = hwif->channel ? (1 << 11) : (1 << 10);
|
|
|
|
pci_read_config_word(dev, 0x50, &CIS);
|
|
|
|
return (CIS & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
|
|
}
|
|
|
|
/*
|
|
* Set the control register to use the 66MHz system
|
|
* clock for UDMA 3/4/5 mode operation when necessary.
|
|
*
|
|
* FIXME: this register is shared by both channels, some locking is needed
|
|
*
|
|
* It may also be possible to leave the 66MHz clock on
|
|
* and readjust the timing parameters.
|
|
*/
|
|
static void pdc_old_enable_66MHz_clock(ide_hwif_t *hwif)
|
|
{
|
|
unsigned long clock_reg = hwif->extra_base + 0x01;
|
|
u8 clock = inb(clock_reg);
|
|
|
|
outb(clock | (hwif->channel ? 0x08 : 0x02), clock_reg);
|
|
}
|
|
|
|
static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif)
|
|
{
|
|
unsigned long clock_reg = hwif->extra_base + 0x01;
|
|
u8 clock = inb(clock_reg);
|
|
|
|
outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
|
|
}
|
|
|
|
static void pdc202xx_quirkproc(ide_drive_t *drive)
|
|
{
|
|
const char **list, *m = (char *)&drive->id[ATA_ID_PROD];
|
|
|
|
for (list = pdc_quirk_drives; *list != NULL; list++)
|
|
if (strstr(m, *list) != NULL) {
|
|
drive->quirk_list = 2;
|
|
return;
|
|
}
|
|
|
|
drive->quirk_list = 0;
|
|
}
|
|
|
|
static void pdc202xx_dma_start(ide_drive_t *drive)
|
|
{
|
|
if (drive->current_speed > XFER_UDMA_2)
|
|
pdc_old_enable_66MHz_clock(drive->hwif);
|
|
if (drive->media != ide_disk || (drive->dev_flags & IDE_DFLAG_LBA48)) {
|
|
struct request *rq = HWGROUP(drive)->rq;
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
unsigned long high_16 = hwif->extra_base - 16;
|
|
unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
|
|
u32 word_count = 0;
|
|
u8 clock = inb(high_16 + 0x11);
|
|
|
|
outb(clock | (hwif->channel ? 0x08 : 0x02), high_16 + 0x11);
|
|
word_count = (rq->nr_sectors << 8);
|
|
word_count = (rq_data_dir(rq) == READ) ?
|
|
word_count | 0x05000000 :
|
|
word_count | 0x06000000;
|
|
outl(word_count, atapi_reg);
|
|
}
|
|
ide_dma_start(drive);
|
|
}
|
|
|
|
static int pdc202xx_dma_end(ide_drive_t *drive)
|
|
{
|
|
if (drive->media != ide_disk || (drive->dev_flags & IDE_DFLAG_LBA48)) {
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
unsigned long high_16 = hwif->extra_base - 16;
|
|
unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
|
|
u8 clock = 0;
|
|
|
|
outl(0, atapi_reg); /* zero out extra */
|
|
clock = inb(high_16 + 0x11);
|
|
outb(clock & ~(hwif->channel ? 0x08:0x02), high_16 + 0x11);
|
|
}
|
|
if (drive->current_speed > XFER_UDMA_2)
|
|
pdc_old_disable_66MHz_clock(drive->hwif);
|
|
return ide_dma_end(drive);
|
|
}
|
|
|
|
static int pdc202xx_dma_test_irq(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
unsigned long high_16 = hwif->extra_base - 16;
|
|
u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
|
|
u8 sc1d = inb(high_16 + 0x001d);
|
|
|
|
if (hwif->channel) {
|
|
/* bit7: Error, bit6: Interrupting, bit5: FIFO Full, bit4: FIFO Empty */
|
|
if ((sc1d & 0x50) == 0x50)
|
|
goto somebody_else;
|
|
else if ((sc1d & 0x40) == 0x40)
|
|
return (dma_stat & 4) == 4;
|
|
} else {
|
|
/* bit3: Error, bit2: Interrupting, bit1: FIFO Full, bit0: FIFO Empty */
|
|
if ((sc1d & 0x05) == 0x05)
|
|
goto somebody_else;
|
|
else if ((sc1d & 0x04) == 0x04)
|
|
return (dma_stat & 4) == 4;
|
|
}
|
|
somebody_else:
|
|
return (dma_stat & 4) == 4; /* return 1 if INTR asserted */
|
|
}
|
|
|
|
static void pdc202xx_reset_host (ide_hwif_t *hwif)
|
|
{
|
|
unsigned long high_16 = hwif->extra_base - 16;
|
|
u8 udma_speed_flag = inb(high_16 | 0x001f);
|
|
|
|
outb(udma_speed_flag | 0x10, high_16 | 0x001f);
|
|
mdelay(100);
|
|
outb(udma_speed_flag & ~0x10, high_16 | 0x001f);
|
|
mdelay(2000); /* 2 seconds ?! */
|
|
|
|
printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
|
|
hwif->channel ? "Secondary" : "Primary");
|
|
}
|
|
|
|
static void pdc202xx_reset (ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
ide_hwif_t *mate = hwif->mate;
|
|
|
|
pdc202xx_reset_host(hwif);
|
|
pdc202xx_reset_host(mate);
|
|
|
|
ide_set_max_pio(drive);
|
|
}
|
|
|
|
static void pdc202xx_dma_lost_irq(ide_drive_t *drive)
|
|
{
|
|
pdc202xx_reset(drive);
|
|
ide_dma_lost_irq(drive);
|
|
}
|
|
|
|
static void pdc202xx_dma_timeout(ide_drive_t *drive)
|
|
{
|
|
pdc202xx_reset(drive);
|
|
ide_dma_timeout(drive);
|
|
}
|
|
|
|
static unsigned int init_chipset_pdc202xx(struct pci_dev *dev)
|
|
{
|
|
unsigned long dmabase = pci_resource_start(dev, 4);
|
|
u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0;
|
|
|
|
if (dmabase == 0)
|
|
goto out;
|
|
|
|
udma_speed_flag = inb(dmabase | 0x1f);
|
|
primary_mode = inb(dmabase | 0x1a);
|
|
secondary_mode = inb(dmabase | 0x1b);
|
|
printk(KERN_INFO "%s: (U)DMA Burst Bit %sABLED " \
|
|
"Primary %s Mode " \
|
|
"Secondary %s Mode.\n", pci_name(dev),
|
|
(udma_speed_flag & 1) ? "EN" : "DIS",
|
|
(primary_mode & 1) ? "MASTER" : "PCI",
|
|
(secondary_mode & 1) ? "MASTER" : "PCI" );
|
|
|
|
if (!(udma_speed_flag & 1)) {
|
|
printk(KERN_INFO "%s: FORCING BURST BIT 0x%02x->0x%02x ",
|
|
pci_name(dev), udma_speed_flag,
|
|
(udma_speed_flag|1));
|
|
outb(udma_speed_flag | 1, dmabase | 0x1f);
|
|
printk("%sACTIVE\n", (inb(dmabase | 0x1f) & 1) ? "" : "IN");
|
|
}
|
|
out:
|
|
return dev->irq;
|
|
}
|
|
|
|
static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
|
|
const char *name)
|
|
{
|
|
if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) {
|
|
u8 irq = 0, irq2 = 0;
|
|
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
|
|
/* 0xbc */
|
|
pci_read_config_byte(dev, (PCI_INTERRUPT_LINE)|0x80, &irq2);
|
|
if (irq != irq2) {
|
|
pci_write_config_byte(dev,
|
|
(PCI_INTERRUPT_LINE)|0x80, irq); /* 0xbc */
|
|
printk(KERN_INFO "%s %s: PCI config space interrupt "
|
|
"mirror fixed\n", name, pci_name(dev));
|
|
}
|
|
}
|
|
}
|
|
|
|
#define IDE_HFLAGS_PDC202XX \
|
|
(IDE_HFLAG_ERROR_STOPS_FIFO | \
|
|
IDE_HFLAG_OFF_BOARD)
|
|
|
|
static const struct ide_port_ops pdc20246_port_ops = {
|
|
.set_pio_mode = pdc202xx_set_pio_mode,
|
|
.set_dma_mode = pdc202xx_set_mode,
|
|
.quirkproc = pdc202xx_quirkproc,
|
|
};
|
|
|
|
static const struct ide_port_ops pdc2026x_port_ops = {
|
|
.set_pio_mode = pdc202xx_set_pio_mode,
|
|
.set_dma_mode = pdc202xx_set_mode,
|
|
.quirkproc = pdc202xx_quirkproc,
|
|
.resetproc = pdc202xx_reset,
|
|
.cable_detect = pdc2026x_cable_detect,
|
|
};
|
|
|
|
static const struct ide_dma_ops pdc20246_dma_ops = {
|
|
.dma_host_set = ide_dma_host_set,
|
|
.dma_setup = ide_dma_setup,
|
|
.dma_exec_cmd = ide_dma_exec_cmd,
|
|
.dma_start = ide_dma_start,
|
|
.dma_end = ide_dma_end,
|
|
.dma_test_irq = pdc202xx_dma_test_irq,
|
|
.dma_lost_irq = pdc202xx_dma_lost_irq,
|
|
.dma_timeout = pdc202xx_dma_timeout,
|
|
};
|
|
|
|
static const struct ide_dma_ops pdc2026x_dma_ops = {
|
|
.dma_host_set = ide_dma_host_set,
|
|
.dma_setup = ide_dma_setup,
|
|
.dma_exec_cmd = ide_dma_exec_cmd,
|
|
.dma_start = pdc202xx_dma_start,
|
|
.dma_end = pdc202xx_dma_end,
|
|
.dma_test_irq = pdc202xx_dma_test_irq,
|
|
.dma_lost_irq = pdc202xx_dma_lost_irq,
|
|
.dma_timeout = pdc202xx_dma_timeout,
|
|
};
|
|
|
|
#define DECLARE_PDC2026X_DEV(udma, extra_flags) \
|
|
{ \
|
|
.name = DRV_NAME, \
|
|
.init_chipset = init_chipset_pdc202xx, \
|
|
.port_ops = &pdc2026x_port_ops, \
|
|
.dma_ops = &pdc2026x_dma_ops, \
|
|
.host_flags = IDE_HFLAGS_PDC202XX | extra_flags, \
|
|
.pio_mask = ATA_PIO4, \
|
|
.mwdma_mask = ATA_MWDMA2, \
|
|
.udma_mask = udma, \
|
|
}
|
|
|
|
static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = {
|
|
{ /* 0: PDC20246 */
|
|
.name = DRV_NAME,
|
|
.init_chipset = init_chipset_pdc202xx,
|
|
.port_ops = &pdc20246_port_ops,
|
|
.dma_ops = &pdc20246_dma_ops,
|
|
.host_flags = IDE_HFLAGS_PDC202XX,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA2,
|
|
},
|
|
|
|
/* 1: PDC2026{2,3} */
|
|
DECLARE_PDC2026X_DEV(ATA_UDMA4, 0),
|
|
/* 2: PDC2026{5,7} */
|
|
DECLARE_PDC2026X_DEV(ATA_UDMA5, IDE_HFLAG_RQSIZE_256),
|
|
};
|
|
|
|
/**
|
|
* pdc202xx_init_one - called when a PDC202xx is found
|
|
* @dev: the pdc202xx device
|
|
* @id: the matching pci id
|
|
*
|
|
* Called when the PCI registration layer (or the IDE initialization)
|
|
* finds a device matching our IDE device tables.
|
|
*/
|
|
|
|
static int __devinit pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
const struct ide_port_info *d;
|
|
u8 idx = id->driver_data;
|
|
|
|
d = &pdc202xx_chipsets[idx];
|
|
|
|
if (idx < 2)
|
|
pdc202ata4_fixup_irq(dev, d->name);
|
|
|
|
if (dev->vendor == PCI_DEVICE_ID_PROMISE_20265) {
|
|
struct pci_dev *bridge = dev->bus->self;
|
|
|
|
if (bridge &&
|
|
bridge->vendor == PCI_VENDOR_ID_INTEL &&
|
|
(bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
|
|
bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
|
|
printk(KERN_INFO DRV_NAME " %s: skipping Promise "
|
|
"PDC20265 attached to I2O RAID controller\n",
|
|
pci_name(dev));
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
return ide_pci_init_one(dev, d, NULL);
|
|
}
|
|
|
|
static const struct pci_device_id pdc202xx_pci_tbl[] = {
|
|
{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0 },
|
|
{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1 },
|
|
{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1 },
|
|
{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20265), 2 },
|
|
{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20267), 2 },
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, pdc202xx_pci_tbl);
|
|
|
|
static struct pci_driver pdc202xx_pci_driver = {
|
|
.name = "Promise_Old_IDE",
|
|
.id_table = pdc202xx_pci_tbl,
|
|
.probe = pdc202xx_init_one,
|
|
.remove = ide_pci_remove,
|
|
.suspend = ide_pci_suspend,
|
|
.resume = ide_pci_resume,
|
|
};
|
|
|
|
static int __init pdc202xx_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&pdc202xx_pci_driver);
|
|
}
|
|
|
|
static void __exit pdc202xx_ide_exit(void)
|
|
{
|
|
pci_unregister_driver(&pdc202xx_pci_driver);
|
|
}
|
|
|
|
module_init(pdc202xx_ide_init);
|
|
module_exit(pdc202xx_ide_exit);
|
|
|
|
MODULE_AUTHOR("Andre Hedrick, Frank Tiernan");
|
|
MODULE_DESCRIPTION("PCI driver module for older Promise IDE");
|
|
MODULE_LICENSE("GPL");
|