1289 строки
33 KiB
C
1289 строки
33 KiB
C
/*
|
|
* Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs.
|
|
*
|
|
* FIXME According to the usermanual the status bits in the status register
|
|
* are only updated when the peripherals access the FIFO and not when the
|
|
* CPU access them. So since we use this bits to know when we stop writing
|
|
* and reading, they may not be updated in-time and a race condition may
|
|
* exists. But I haven't be able to prove this and I don't care. But if
|
|
* any problem arises, it might worth checking. The TX/RX FIFO Stats
|
|
* registers should be used in addition.
|
|
* Update: Actually, they seem updated ... At least the bits we use.
|
|
*
|
|
*
|
|
* Maintainer : Sylvain Munaut <tnt@246tNt.com>
|
|
*
|
|
* Some of the code has been inspired/copied from the 2.4 code written
|
|
* by Dale Farnsworth <dfarnsworth@mvista.com>.
|
|
*
|
|
* Copyright (C) 2008 Freescale Semiconductor Inc.
|
|
* John Rigby <jrigby@gmail.com>
|
|
* Added support for MPC5121
|
|
* Copyright (C) 2006 Secret Lab Technologies Ltd.
|
|
* Grant Likely <grant.likely@secretlab.ca>
|
|
* Copyright (C) 2004-2006 Sylvain Munaut <tnt@246tNt.com>
|
|
* Copyright (C) 2003 MontaVista, Software, Inc.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
/* Platform device Usage :
|
|
*
|
|
* Since PSCs can have multiple function, the correct driver for each one
|
|
* is selected by calling mpc52xx_match_psc_function(...). The function
|
|
* handled by this driver is "uart".
|
|
*
|
|
* The driver init all necessary registers to place the PSC in uart mode without
|
|
* DCD. However, the pin multiplexing aren't changed and should be set either
|
|
* by the bootloader or in the platform init code.
|
|
*
|
|
* The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2,
|
|
* and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
|
|
* so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
|
|
* fpr the console code : without this 1:1 mapping, at early boot time, when we
|
|
* are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it
|
|
* will be mapped to.
|
|
*/
|
|
|
|
/* OF Platform device Usage :
|
|
*
|
|
* This driver is only used for PSCs configured in uart mode. The device
|
|
* tree will have a node for each PSC in uart mode w/ device_type = "serial"
|
|
* and "mpc52xx-psc-uart" in the compatible string
|
|
*
|
|
* By default, PSC devices are enumerated in the order they are found. However
|
|
* a particular PSC number can be forces by adding 'device_no = <port#>'
|
|
* to the device node.
|
|
*
|
|
* The driver init all necessary registers to place the PSC in uart mode without
|
|
* DCD. However, the pin multiplexing aren't changed and should be set either
|
|
* by the bootloader or in the platform init code.
|
|
*/
|
|
|
|
#undef DEBUG
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/console.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
|
|
#include <asm/mpc52xx.h>
|
|
#include <asm/mpc512x.h>
|
|
#include <asm/mpc52xx_psc.h>
|
|
|
|
#if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
|
#define SUPPORT_SYSRQ
|
|
#endif
|
|
|
|
#include <linux/serial_core.h>
|
|
|
|
|
|
/* We've been assigned a range on the "Low-density serial ports" major */
|
|
#define SERIAL_PSC_MAJOR 204
|
|
#define SERIAL_PSC_MINOR 148
|
|
|
|
|
|
#define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */
|
|
|
|
|
|
static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM];
|
|
/* Rem: - We use the read_status_mask as a shadow of
|
|
* psc->mpc52xx_psc_imr
|
|
* - It's important that is array is all zero on start as we
|
|
* use it to know if it's initialized or not ! If it's not sure
|
|
* it's cleared, then a memset(...,0,...) should be added to
|
|
* the console_init
|
|
*/
|
|
|
|
/* lookup table for matching device nodes to index numbers */
|
|
static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM];
|
|
|
|
static void mpc52xx_uart_of_enumerate(void);
|
|
|
|
|
|
#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
|
|
|
|
|
|
/* Forward declaration of the interruption handling routine */
|
|
static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id);
|
|
|
|
|
|
/* Simple macro to test if a port is console or not. This one is taken
|
|
* for serial_core.c and maybe should be moved to serial_core.h ? */
|
|
#ifdef CONFIG_SERIAL_CORE_CONSOLE
|
|
#define uart_console(port) \
|
|
((port)->cons && (port)->cons->index == (port)->line)
|
|
#else
|
|
#define uart_console(port) (0)
|
|
#endif
|
|
|
|
/* ======================================================================== */
|
|
/* PSC fifo operations for isolating differences between 52xx and 512x */
|
|
/* ======================================================================== */
|
|
|
|
struct psc_ops {
|
|
void (*fifo_init)(struct uart_port *port);
|
|
int (*raw_rx_rdy)(struct uart_port *port);
|
|
int (*raw_tx_rdy)(struct uart_port *port);
|
|
int (*rx_rdy)(struct uart_port *port);
|
|
int (*tx_rdy)(struct uart_port *port);
|
|
int (*tx_empty)(struct uart_port *port);
|
|
void (*stop_rx)(struct uart_port *port);
|
|
void (*start_tx)(struct uart_port *port);
|
|
void (*stop_tx)(struct uart_port *port);
|
|
void (*rx_clr_irq)(struct uart_port *port);
|
|
void (*tx_clr_irq)(struct uart_port *port);
|
|
void (*write_char)(struct uart_port *port, unsigned char c);
|
|
unsigned char (*read_char)(struct uart_port *port);
|
|
void (*cw_disable_ints)(struct uart_port *port);
|
|
void (*cw_restore_ints)(struct uart_port *port);
|
|
unsigned long (*getuartclk)(void *p);
|
|
};
|
|
|
|
#ifdef CONFIG_PPC_MPC52xx
|
|
#define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
|
|
static void mpc52xx_psc_fifo_init(struct uart_port *port)
|
|
{
|
|
struct mpc52xx_psc __iomem *psc = PSC(port);
|
|
struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port);
|
|
|
|
/* /32 prescaler */
|
|
out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00);
|
|
|
|
out_8(&fifo->rfcntl, 0x00);
|
|
out_be16(&fifo->rfalarm, 0x1ff);
|
|
out_8(&fifo->tfcntl, 0x07);
|
|
out_be16(&fifo->tfalarm, 0x80);
|
|
|
|
port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY;
|
|
out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
|
|
}
|
|
|
|
static int mpc52xx_psc_raw_rx_rdy(struct uart_port *port)
|
|
{
|
|
return in_be16(&PSC(port)->mpc52xx_psc_status)
|
|
& MPC52xx_PSC_SR_RXRDY;
|
|
}
|
|
|
|
static int mpc52xx_psc_raw_tx_rdy(struct uart_port *port)
|
|
{
|
|
return in_be16(&PSC(port)->mpc52xx_psc_status)
|
|
& MPC52xx_PSC_SR_TXRDY;
|
|
}
|
|
|
|
|
|
static int mpc52xx_psc_rx_rdy(struct uart_port *port)
|
|
{
|
|
return in_be16(&PSC(port)->mpc52xx_psc_isr)
|
|
& port->read_status_mask
|
|
& MPC52xx_PSC_IMR_RXRDY;
|
|
}
|
|
|
|
static int mpc52xx_psc_tx_rdy(struct uart_port *port)
|
|
{
|
|
return in_be16(&PSC(port)->mpc52xx_psc_isr)
|
|
& port->read_status_mask
|
|
& MPC52xx_PSC_IMR_TXRDY;
|
|
}
|
|
|
|
static int mpc52xx_psc_tx_empty(struct uart_port *port)
|
|
{
|
|
return in_be16(&PSC(port)->mpc52xx_psc_status)
|
|
& MPC52xx_PSC_SR_TXEMP;
|
|
}
|
|
|
|
static void mpc52xx_psc_start_tx(struct uart_port *port)
|
|
{
|
|
port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
|
|
out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
|
|
}
|
|
|
|
static void mpc52xx_psc_stop_tx(struct uart_port *port)
|
|
{
|
|
port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY;
|
|
out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
|
|
}
|
|
|
|
static void mpc52xx_psc_stop_rx(struct uart_port *port)
|
|
{
|
|
port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY;
|
|
out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
|
|
}
|
|
|
|
static void mpc52xx_psc_rx_clr_irq(struct uart_port *port)
|
|
{
|
|
}
|
|
|
|
static void mpc52xx_psc_tx_clr_irq(struct uart_port *port)
|
|
{
|
|
}
|
|
|
|
static void mpc52xx_psc_write_char(struct uart_port *port, unsigned char c)
|
|
{
|
|
out_8(&PSC(port)->mpc52xx_psc_buffer_8, c);
|
|
}
|
|
|
|
static unsigned char mpc52xx_psc_read_char(struct uart_port *port)
|
|
{
|
|
return in_8(&PSC(port)->mpc52xx_psc_buffer_8);
|
|
}
|
|
|
|
static void mpc52xx_psc_cw_disable_ints(struct uart_port *port)
|
|
{
|
|
out_be16(&PSC(port)->mpc52xx_psc_imr, 0);
|
|
}
|
|
|
|
static void mpc52xx_psc_cw_restore_ints(struct uart_port *port)
|
|
{
|
|
out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
|
|
}
|
|
|
|
/* Search for bus-frequency property in this node or a parent */
|
|
static unsigned long mpc52xx_getuartclk(void *p)
|
|
{
|
|
/*
|
|
* 5200 UARTs have a / 32 prescaler
|
|
* but the generic serial code assumes 16
|
|
* so return ipb freq / 2
|
|
*/
|
|
return mpc52xx_find_ipb_freq(p) / 2;
|
|
}
|
|
|
|
static struct psc_ops mpc52xx_psc_ops = {
|
|
.fifo_init = mpc52xx_psc_fifo_init,
|
|
.raw_rx_rdy = mpc52xx_psc_raw_rx_rdy,
|
|
.raw_tx_rdy = mpc52xx_psc_raw_tx_rdy,
|
|
.rx_rdy = mpc52xx_psc_rx_rdy,
|
|
.tx_rdy = mpc52xx_psc_tx_rdy,
|
|
.tx_empty = mpc52xx_psc_tx_empty,
|
|
.stop_rx = mpc52xx_psc_stop_rx,
|
|
.start_tx = mpc52xx_psc_start_tx,
|
|
.stop_tx = mpc52xx_psc_stop_tx,
|
|
.rx_clr_irq = mpc52xx_psc_rx_clr_irq,
|
|
.tx_clr_irq = mpc52xx_psc_tx_clr_irq,
|
|
.write_char = mpc52xx_psc_write_char,
|
|
.read_char = mpc52xx_psc_read_char,
|
|
.cw_disable_ints = mpc52xx_psc_cw_disable_ints,
|
|
.cw_restore_ints = mpc52xx_psc_cw_restore_ints,
|
|
.getuartclk = mpc52xx_getuartclk,
|
|
};
|
|
|
|
#endif /* CONFIG_MPC52xx */
|
|
|
|
#ifdef CONFIG_PPC_MPC512x
|
|
#define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1))
|
|
static void mpc512x_psc_fifo_init(struct uart_port *port)
|
|
{
|
|
out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE);
|
|
out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE);
|
|
out_be32(&FIFO_512x(port)->txalarm, 1);
|
|
out_be32(&FIFO_512x(port)->tximr, 0);
|
|
|
|
out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_RESET_SLICE);
|
|
out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_ENABLE_SLICE);
|
|
out_be32(&FIFO_512x(port)->rxalarm, 1);
|
|
out_be32(&FIFO_512x(port)->rximr, 0);
|
|
|
|
out_be32(&FIFO_512x(port)->tximr, MPC512x_PSC_FIFO_ALARM);
|
|
out_be32(&FIFO_512x(port)->rximr, MPC512x_PSC_FIFO_ALARM);
|
|
}
|
|
|
|
static int mpc512x_psc_raw_rx_rdy(struct uart_port *port)
|
|
{
|
|
return !(in_be32(&FIFO_512x(port)->rxsr) & MPC512x_PSC_FIFO_EMPTY);
|
|
}
|
|
|
|
static int mpc512x_psc_raw_tx_rdy(struct uart_port *port)
|
|
{
|
|
return !(in_be32(&FIFO_512x(port)->txsr) & MPC512x_PSC_FIFO_FULL);
|
|
}
|
|
|
|
static int mpc512x_psc_rx_rdy(struct uart_port *port)
|
|
{
|
|
return in_be32(&FIFO_512x(port)->rxsr)
|
|
& in_be32(&FIFO_512x(port)->rximr)
|
|
& MPC512x_PSC_FIFO_ALARM;
|
|
}
|
|
|
|
static int mpc512x_psc_tx_rdy(struct uart_port *port)
|
|
{
|
|
return in_be32(&FIFO_512x(port)->txsr)
|
|
& in_be32(&FIFO_512x(port)->tximr)
|
|
& MPC512x_PSC_FIFO_ALARM;
|
|
}
|
|
|
|
static int mpc512x_psc_tx_empty(struct uart_port *port)
|
|
{
|
|
return in_be32(&FIFO_512x(port)->txsr)
|
|
& MPC512x_PSC_FIFO_EMPTY;
|
|
}
|
|
|
|
static void mpc512x_psc_stop_rx(struct uart_port *port)
|
|
{
|
|
unsigned long rx_fifo_imr;
|
|
|
|
rx_fifo_imr = in_be32(&FIFO_512x(port)->rximr);
|
|
rx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM;
|
|
out_be32(&FIFO_512x(port)->rximr, rx_fifo_imr);
|
|
}
|
|
|
|
static void mpc512x_psc_start_tx(struct uart_port *port)
|
|
{
|
|
unsigned long tx_fifo_imr;
|
|
|
|
tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr);
|
|
tx_fifo_imr |= MPC512x_PSC_FIFO_ALARM;
|
|
out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr);
|
|
}
|
|
|
|
static void mpc512x_psc_stop_tx(struct uart_port *port)
|
|
{
|
|
unsigned long tx_fifo_imr;
|
|
|
|
tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr);
|
|
tx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM;
|
|
out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr);
|
|
}
|
|
|
|
static void mpc512x_psc_rx_clr_irq(struct uart_port *port)
|
|
{
|
|
out_be32(&FIFO_512x(port)->rxisr, in_be32(&FIFO_512x(port)->rxisr));
|
|
}
|
|
|
|
static void mpc512x_psc_tx_clr_irq(struct uart_port *port)
|
|
{
|
|
out_be32(&FIFO_512x(port)->txisr, in_be32(&FIFO_512x(port)->txisr));
|
|
}
|
|
|
|
static void mpc512x_psc_write_char(struct uart_port *port, unsigned char c)
|
|
{
|
|
out_8(&FIFO_512x(port)->txdata_8, c);
|
|
}
|
|
|
|
static unsigned char mpc512x_psc_read_char(struct uart_port *port)
|
|
{
|
|
return in_8(&FIFO_512x(port)->rxdata_8);
|
|
}
|
|
|
|
static void mpc512x_psc_cw_disable_ints(struct uart_port *port)
|
|
{
|
|
port->read_status_mask =
|
|
in_be32(&FIFO_512x(port)->tximr) << 16 |
|
|
in_be32(&FIFO_512x(port)->rximr);
|
|
out_be32(&FIFO_512x(port)->tximr, 0);
|
|
out_be32(&FIFO_512x(port)->rximr, 0);
|
|
}
|
|
|
|
static void mpc512x_psc_cw_restore_ints(struct uart_port *port)
|
|
{
|
|
out_be32(&FIFO_512x(port)->tximr,
|
|
(port->read_status_mask >> 16) & 0x7f);
|
|
out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f);
|
|
}
|
|
|
|
static unsigned long mpc512x_getuartclk(void *p)
|
|
{
|
|
return mpc512x_find_ips_freq(p);
|
|
}
|
|
|
|
static struct psc_ops mpc512x_psc_ops = {
|
|
.fifo_init = mpc512x_psc_fifo_init,
|
|
.raw_rx_rdy = mpc512x_psc_raw_rx_rdy,
|
|
.raw_tx_rdy = mpc512x_psc_raw_tx_rdy,
|
|
.rx_rdy = mpc512x_psc_rx_rdy,
|
|
.tx_rdy = mpc512x_psc_tx_rdy,
|
|
.tx_empty = mpc512x_psc_tx_empty,
|
|
.stop_rx = mpc512x_psc_stop_rx,
|
|
.start_tx = mpc512x_psc_start_tx,
|
|
.stop_tx = mpc512x_psc_stop_tx,
|
|
.rx_clr_irq = mpc512x_psc_rx_clr_irq,
|
|
.tx_clr_irq = mpc512x_psc_tx_clr_irq,
|
|
.write_char = mpc512x_psc_write_char,
|
|
.read_char = mpc512x_psc_read_char,
|
|
.cw_disable_ints = mpc512x_psc_cw_disable_ints,
|
|
.cw_restore_ints = mpc512x_psc_cw_restore_ints,
|
|
.getuartclk = mpc512x_getuartclk,
|
|
};
|
|
#endif
|
|
|
|
static struct psc_ops *psc_ops;
|
|
|
|
/* ======================================================================== */
|
|
/* UART operations */
|
|
/* ======================================================================== */
|
|
|
|
static unsigned int
|
|
mpc52xx_uart_tx_empty(struct uart_port *port)
|
|
{
|
|
return psc_ops->tx_empty(port) ? TIOCSER_TEMT : 0;
|
|
}
|
|
|
|
static void
|
|
mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
/* Not implemented */
|
|
}
|
|
|
|
static unsigned int
|
|
mpc52xx_uart_get_mctrl(struct uart_port *port)
|
|
{
|
|
/* Not implemented */
|
|
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
|
|
}
|
|
|
|
static void
|
|
mpc52xx_uart_stop_tx(struct uart_port *port)
|
|
{
|
|
/* port->lock taken by caller */
|
|
psc_ops->stop_tx(port);
|
|
}
|
|
|
|
static void
|
|
mpc52xx_uart_start_tx(struct uart_port *port)
|
|
{
|
|
/* port->lock taken by caller */
|
|
psc_ops->start_tx(port);
|
|
}
|
|
|
|
static void
|
|
mpc52xx_uart_send_xchar(struct uart_port *port, char ch)
|
|
{
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
port->x_char = ch;
|
|
if (ch) {
|
|
/* Make sure tx interrupts are on */
|
|
/* Truly necessary ??? They should be anyway */
|
|
psc_ops->start_tx(port);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static void
|
|
mpc52xx_uart_stop_rx(struct uart_port *port)
|
|
{
|
|
/* port->lock taken by caller */
|
|
psc_ops->stop_rx(port);
|
|
}
|
|
|
|
static void
|
|
mpc52xx_uart_enable_ms(struct uart_port *port)
|
|
{
|
|
/* Not implemented */
|
|
}
|
|
|
|
static void
|
|
mpc52xx_uart_break_ctl(struct uart_port *port, int ctl)
|
|
{
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
if (ctl == -1)
|
|
out_8(&PSC(port)->command, MPC52xx_PSC_START_BRK);
|
|
else
|
|
out_8(&PSC(port)->command, MPC52xx_PSC_STOP_BRK);
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static int
|
|
mpc52xx_uart_startup(struct uart_port *port)
|
|
{
|
|
struct mpc52xx_psc __iomem *psc = PSC(port);
|
|
int ret;
|
|
|
|
/* Request IRQ */
|
|
ret = request_irq(port->irq, mpc52xx_uart_int,
|
|
IRQF_DISABLED | IRQF_SAMPLE_RANDOM | IRQF_SHARED,
|
|
"mpc52xx_psc_uart", port);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Reset/activate the port, clear and enable interrupts */
|
|
out_8(&psc->command, MPC52xx_PSC_RST_RX);
|
|
out_8(&psc->command, MPC52xx_PSC_RST_TX);
|
|
|
|
out_be32(&psc->sicr, 0); /* UART mode DCD ignored */
|
|
|
|
psc_ops->fifo_init(port);
|
|
|
|
out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
|
|
out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
mpc52xx_uart_shutdown(struct uart_port *port)
|
|
{
|
|
struct mpc52xx_psc __iomem *psc = PSC(port);
|
|
|
|
/* Shut down the port. Leave TX active if on a console port */
|
|
out_8(&psc->command, MPC52xx_PSC_RST_RX);
|
|
if (!uart_console(port))
|
|
out_8(&psc->command, MPC52xx_PSC_RST_TX);
|
|
|
|
port->read_status_mask = 0;
|
|
out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
|
|
|
|
/* Release interrupt */
|
|
free_irq(port->irq, port);
|
|
}
|
|
|
|
static void
|
|
mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
|
|
struct ktermios *old)
|
|
{
|
|
struct mpc52xx_psc __iomem *psc = PSC(port);
|
|
unsigned long flags;
|
|
unsigned char mr1, mr2;
|
|
unsigned short ctr;
|
|
unsigned int j, baud, quot;
|
|
|
|
/* Prepare what we're gonna write */
|
|
mr1 = 0;
|
|
|
|
switch (new->c_cflag & CSIZE) {
|
|
case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS;
|
|
break;
|
|
case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS;
|
|
break;
|
|
case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS;
|
|
break;
|
|
case CS8:
|
|
default: mr1 |= MPC52xx_PSC_MODE_8_BITS;
|
|
}
|
|
|
|
if (new->c_cflag & PARENB) {
|
|
mr1 |= (new->c_cflag & PARODD) ?
|
|
MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN;
|
|
} else
|
|
mr1 |= MPC52xx_PSC_MODE_PARNONE;
|
|
|
|
|
|
mr2 = 0;
|
|
|
|
if (new->c_cflag & CSTOPB)
|
|
mr2 |= MPC52xx_PSC_MODE_TWO_STOP;
|
|
else
|
|
mr2 |= ((new->c_cflag & CSIZE) == CS5) ?
|
|
MPC52xx_PSC_MODE_ONE_STOP_5_BITS :
|
|
MPC52xx_PSC_MODE_ONE_STOP;
|
|
|
|
|
|
baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
|
|
quot = uart_get_divisor(port, baud);
|
|
ctr = quot & 0xffff;
|
|
|
|
/* Get the lock */
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
/* Update the per-port timeout */
|
|
uart_update_timeout(port, new->c_cflag, baud);
|
|
|
|
/* Do our best to flush TX & RX, so we don't loose anything */
|
|
/* But we don't wait indefinitly ! */
|
|
j = 5000000; /* Maximum wait */
|
|
/* FIXME Can't receive chars since set_termios might be called at early
|
|
* boot for the console, all stuff is not yet ready to receive at that
|
|
* time and that just makes the kernel oops */
|
|
/* while (j-- && mpc52xx_uart_int_rx_chars(port)); */
|
|
while (!mpc52xx_uart_tx_empty(port) && --j)
|
|
udelay(1);
|
|
|
|
if (!j)
|
|
printk(KERN_ERR "mpc52xx_uart.c: "
|
|
"Unable to flush RX & TX fifos in-time in set_termios."
|
|
"Some chars may have been lost.\n");
|
|
|
|
/* Reset the TX & RX */
|
|
out_8(&psc->command, MPC52xx_PSC_RST_RX);
|
|
out_8(&psc->command, MPC52xx_PSC_RST_TX);
|
|
|
|
/* Send new mode settings */
|
|
out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
|
|
out_8(&psc->mode, mr1);
|
|
out_8(&psc->mode, mr2);
|
|
out_8(&psc->ctur, ctr >> 8);
|
|
out_8(&psc->ctlr, ctr & 0xff);
|
|
|
|
/* Reenable TX & RX */
|
|
out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
|
|
out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
|
|
|
|
/* We're all set, release the lock */
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static const char *
|
|
mpc52xx_uart_type(struct uart_port *port)
|
|
{
|
|
return port->type == PORT_MPC52xx ? "MPC52xx PSC" : NULL;
|
|
}
|
|
|
|
static void
|
|
mpc52xx_uart_release_port(struct uart_port *port)
|
|
{
|
|
/* remapped by us ? */
|
|
if (port->flags & UPF_IOREMAP) {
|
|
iounmap(port->membase);
|
|
port->membase = NULL;
|
|
}
|
|
|
|
release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc));
|
|
}
|
|
|
|
static int
|
|
mpc52xx_uart_request_port(struct uart_port *port)
|
|
{
|
|
int err;
|
|
|
|
if (port->flags & UPF_IOREMAP) /* Need to remap ? */
|
|
port->membase = ioremap(port->mapbase,
|
|
sizeof(struct mpc52xx_psc));
|
|
|
|
if (!port->membase)
|
|
return -EINVAL;
|
|
|
|
err = request_mem_region(port->mapbase, sizeof(struct mpc52xx_psc),
|
|
"mpc52xx_psc_uart") != NULL ? 0 : -EBUSY;
|
|
|
|
if (err && (port->flags & UPF_IOREMAP)) {
|
|
iounmap(port->membase);
|
|
port->membase = NULL;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static void
|
|
mpc52xx_uart_config_port(struct uart_port *port, int flags)
|
|
{
|
|
if ((flags & UART_CONFIG_TYPE)
|
|
&& (mpc52xx_uart_request_port(port) == 0))
|
|
port->type = PORT_MPC52xx;
|
|
}
|
|
|
|
static int
|
|
mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
|
|
{
|
|
if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx)
|
|
return -EINVAL;
|
|
|
|
if ((ser->irq != port->irq) ||
|
|
(ser->io_type != SERIAL_IO_MEM) ||
|
|
(ser->baud_base != port->uartclk) ||
|
|
(ser->iomem_base != (void *)port->mapbase) ||
|
|
(ser->hub6 != 0))
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct uart_ops mpc52xx_uart_ops = {
|
|
.tx_empty = mpc52xx_uart_tx_empty,
|
|
.set_mctrl = mpc52xx_uart_set_mctrl,
|
|
.get_mctrl = mpc52xx_uart_get_mctrl,
|
|
.stop_tx = mpc52xx_uart_stop_tx,
|
|
.start_tx = mpc52xx_uart_start_tx,
|
|
.send_xchar = mpc52xx_uart_send_xchar,
|
|
.stop_rx = mpc52xx_uart_stop_rx,
|
|
.enable_ms = mpc52xx_uart_enable_ms,
|
|
.break_ctl = mpc52xx_uart_break_ctl,
|
|
.startup = mpc52xx_uart_startup,
|
|
.shutdown = mpc52xx_uart_shutdown,
|
|
.set_termios = mpc52xx_uart_set_termios,
|
|
/* .pm = mpc52xx_uart_pm, Not supported yet */
|
|
/* .set_wake = mpc52xx_uart_set_wake, Not supported yet */
|
|
.type = mpc52xx_uart_type,
|
|
.release_port = mpc52xx_uart_release_port,
|
|
.request_port = mpc52xx_uart_request_port,
|
|
.config_port = mpc52xx_uart_config_port,
|
|
.verify_port = mpc52xx_uart_verify_port
|
|
};
|
|
|
|
|
|
/* ======================================================================== */
|
|
/* Interrupt handling */
|
|
/* ======================================================================== */
|
|
|
|
static inline int
|
|
mpc52xx_uart_int_rx_chars(struct uart_port *port)
|
|
{
|
|
struct tty_struct *tty = port->info->port.tty;
|
|
unsigned char ch, flag;
|
|
unsigned short status;
|
|
|
|
/* While we can read, do so ! */
|
|
while (psc_ops->raw_rx_rdy(port)) {
|
|
/* Get the char */
|
|
ch = psc_ops->read_char(port);
|
|
|
|
/* Handle sysreq char */
|
|
#ifdef SUPPORT_SYSRQ
|
|
if (uart_handle_sysrq_char(port, ch)) {
|
|
port->sysrq = 0;
|
|
continue;
|
|
}
|
|
#endif
|
|
|
|
/* Store it */
|
|
|
|
flag = TTY_NORMAL;
|
|
port->icount.rx++;
|
|
|
|
status = in_be16(&PSC(port)->mpc52xx_psc_status);
|
|
|
|
if (status & (MPC52xx_PSC_SR_PE |
|
|
MPC52xx_PSC_SR_FE |
|
|
MPC52xx_PSC_SR_RB)) {
|
|
|
|
if (status & MPC52xx_PSC_SR_RB) {
|
|
flag = TTY_BREAK;
|
|
uart_handle_break(port);
|
|
} else if (status & MPC52xx_PSC_SR_PE)
|
|
flag = TTY_PARITY;
|
|
else if (status & MPC52xx_PSC_SR_FE)
|
|
flag = TTY_FRAME;
|
|
|
|
/* Clear error condition */
|
|
out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT);
|
|
|
|
}
|
|
tty_insert_flip_char(tty, ch, flag);
|
|
if (status & MPC52xx_PSC_SR_OE) {
|
|
/*
|
|
* Overrun is special, since it's
|
|
* reported immediately, and doesn't
|
|
* affect the current character
|
|
*/
|
|
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
|
|
}
|
|
}
|
|
|
|
spin_unlock(&port->lock);
|
|
tty_flip_buffer_push(tty);
|
|
spin_lock(&port->lock);
|
|
|
|
return psc_ops->raw_rx_rdy(port);
|
|
}
|
|
|
|
static inline int
|
|
mpc52xx_uart_int_tx_chars(struct uart_port *port)
|
|
{
|
|
struct circ_buf *xmit = &port->info->xmit;
|
|
|
|
/* Process out of band chars */
|
|
if (port->x_char) {
|
|
psc_ops->write_char(port, port->x_char);
|
|
port->icount.tx++;
|
|
port->x_char = 0;
|
|
return 1;
|
|
}
|
|
|
|
/* Nothing to do ? */
|
|
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
|
|
mpc52xx_uart_stop_tx(port);
|
|
return 0;
|
|
}
|
|
|
|
/* Send chars */
|
|
while (psc_ops->raw_tx_rdy(port)) {
|
|
psc_ops->write_char(port, xmit->buf[xmit->tail]);
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
port->icount.tx++;
|
|
if (uart_circ_empty(xmit))
|
|
break;
|
|
}
|
|
|
|
/* Wake up */
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(port);
|
|
|
|
/* Maybe we're done after all */
|
|
if (uart_circ_empty(xmit)) {
|
|
mpc52xx_uart_stop_tx(port);
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static irqreturn_t
|
|
mpc52xx_uart_int(int irq, void *dev_id)
|
|
{
|
|
struct uart_port *port = dev_id;
|
|
unsigned long pass = ISR_PASS_LIMIT;
|
|
unsigned int keepgoing;
|
|
|
|
spin_lock(&port->lock);
|
|
|
|
/* While we have stuff to do, we continue */
|
|
do {
|
|
/* If we don't find anything to do, we stop */
|
|
keepgoing = 0;
|
|
|
|
psc_ops->rx_clr_irq(port);
|
|
if (psc_ops->rx_rdy(port))
|
|
keepgoing |= mpc52xx_uart_int_rx_chars(port);
|
|
|
|
psc_ops->tx_clr_irq(port);
|
|
if (psc_ops->tx_rdy(port))
|
|
keepgoing |= mpc52xx_uart_int_tx_chars(port);
|
|
|
|
/* Limit number of iteration */
|
|
if (!(--pass))
|
|
keepgoing = 0;
|
|
|
|
} while (keepgoing);
|
|
|
|
spin_unlock(&port->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
|
|
/* ======================================================================== */
|
|
/* Console ( if applicable ) */
|
|
/* ======================================================================== */
|
|
|
|
#ifdef CONFIG_SERIAL_MPC52xx_CONSOLE
|
|
|
|
static void __init
|
|
mpc52xx_console_get_options(struct uart_port *port,
|
|
int *baud, int *parity, int *bits, int *flow)
|
|
{
|
|
struct mpc52xx_psc __iomem *psc = PSC(port);
|
|
unsigned char mr1;
|
|
|
|
pr_debug("mpc52xx_console_get_options(port=%p)\n", port);
|
|
|
|
/* Read the mode registers */
|
|
out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
|
|
mr1 = in_8(&psc->mode);
|
|
|
|
/* CT{U,L}R are write-only ! */
|
|
*baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
|
|
|
|
/* Parse them */
|
|
switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) {
|
|
case MPC52xx_PSC_MODE_5_BITS:
|
|
*bits = 5;
|
|
break;
|
|
case MPC52xx_PSC_MODE_6_BITS:
|
|
*bits = 6;
|
|
break;
|
|
case MPC52xx_PSC_MODE_7_BITS:
|
|
*bits = 7;
|
|
break;
|
|
case MPC52xx_PSC_MODE_8_BITS:
|
|
default:
|
|
*bits = 8;
|
|
}
|
|
|
|
if (mr1 & MPC52xx_PSC_MODE_PARNONE)
|
|
*parity = 'n';
|
|
else
|
|
*parity = mr1 & MPC52xx_PSC_MODE_PARODD ? 'o' : 'e';
|
|
}
|
|
|
|
static void
|
|
mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
|
|
{
|
|
struct uart_port *port = &mpc52xx_uart_ports[co->index];
|
|
unsigned int i, j;
|
|
|
|
/* Disable interrupts */
|
|
psc_ops->cw_disable_ints(port);
|
|
|
|
/* Wait the TX buffer to be empty */
|
|
j = 5000000; /* Maximum wait */
|
|
while (!mpc52xx_uart_tx_empty(port) && --j)
|
|
udelay(1);
|
|
|
|
/* Write all the chars */
|
|
for (i = 0; i < count; i++, s++) {
|
|
/* Line return handling */
|
|
if (*s == '\n')
|
|
psc_ops->write_char(port, '\r');
|
|
|
|
/* Send the char */
|
|
psc_ops->write_char(port, *s);
|
|
|
|
/* Wait the TX buffer to be empty */
|
|
j = 20000; /* Maximum wait */
|
|
while (!mpc52xx_uart_tx_empty(port) && --j)
|
|
udelay(1);
|
|
}
|
|
|
|
/* Restore interrupt state */
|
|
psc_ops->cw_restore_ints(port);
|
|
}
|
|
|
|
|
|
static int __init
|
|
mpc52xx_console_setup(struct console *co, char *options)
|
|
{
|
|
struct uart_port *port = &mpc52xx_uart_ports[co->index];
|
|
struct device_node *np = mpc52xx_uart_nodes[co->index];
|
|
unsigned int uartclk;
|
|
struct resource res;
|
|
int ret;
|
|
|
|
int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
|
|
pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n",
|
|
co, co->index, options);
|
|
|
|
if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) {
|
|
pr_debug("PSC%x out of range\n", co->index);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!np) {
|
|
pr_debug("PSC%x not found in device tree\n", co->index);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pr_debug("Console on ttyPSC%x is %s\n",
|
|
co->index, mpc52xx_uart_nodes[co->index]->full_name);
|
|
|
|
/* Fetch register locations */
|
|
ret = of_address_to_resource(np, 0, &res);
|
|
if (ret) {
|
|
pr_debug("Could not get resources for PSC%x\n", co->index);
|
|
return ret;
|
|
}
|
|
|
|
uartclk = psc_ops->getuartclk(np);
|
|
if (uartclk == 0) {
|
|
pr_debug("Could not find uart clock frequency!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Basic port init. Needed since we use some uart_??? func before
|
|
* real init for early access */
|
|
spin_lock_init(&port->lock);
|
|
port->uartclk = uartclk;
|
|
port->ops = &mpc52xx_uart_ops;
|
|
port->mapbase = res.start;
|
|
port->membase = ioremap(res.start, sizeof(struct mpc52xx_psc));
|
|
port->irq = irq_of_parse_and_map(np, 0);
|
|
|
|
if (port->membase == NULL)
|
|
return -EINVAL;
|
|
|
|
pr_debug("mpc52xx-psc uart at %p, mapped to %p, irq=%x, freq=%i\n",
|
|
(void *)port->mapbase, port->membase,
|
|
port->irq, port->uartclk);
|
|
|
|
/* Setup the port parameters accoding to options */
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
else
|
|
mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow);
|
|
|
|
pr_debug("Setting console parameters: %i %i%c1 flow=%c\n",
|
|
baud, bits, parity, flow);
|
|
|
|
return uart_set_options(port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
|
|
static struct uart_driver mpc52xx_uart_driver;
|
|
|
|
static struct console mpc52xx_console = {
|
|
.name = "ttyPSC",
|
|
.write = mpc52xx_console_write,
|
|
.device = uart_console_device,
|
|
.setup = mpc52xx_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0) */
|
|
.data = &mpc52xx_uart_driver,
|
|
};
|
|
|
|
|
|
static int __init
|
|
mpc52xx_console_init(void)
|
|
{
|
|
mpc52xx_uart_of_enumerate();
|
|
register_console(&mpc52xx_console);
|
|
return 0;
|
|
}
|
|
|
|
console_initcall(mpc52xx_console_init);
|
|
|
|
#define MPC52xx_PSC_CONSOLE &mpc52xx_console
|
|
#else
|
|
#define MPC52xx_PSC_CONSOLE NULL
|
|
#endif
|
|
|
|
|
|
/* ======================================================================== */
|
|
/* UART Driver */
|
|
/* ======================================================================== */
|
|
|
|
static struct uart_driver mpc52xx_uart_driver = {
|
|
.driver_name = "mpc52xx_psc_uart",
|
|
.dev_name = "ttyPSC",
|
|
.major = SERIAL_PSC_MAJOR,
|
|
.minor = SERIAL_PSC_MINOR,
|
|
.nr = MPC52xx_PSC_MAXNUM,
|
|
.cons = MPC52xx_PSC_CONSOLE,
|
|
};
|
|
|
|
/* ======================================================================== */
|
|
/* OF Platform Driver */
|
|
/* ======================================================================== */
|
|
|
|
static struct of_device_id mpc52xx_uart_of_match[] = {
|
|
#ifdef CONFIG_PPC_MPC52xx
|
|
{ .compatible = "fsl,mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
|
|
/* binding used by old lite5200 device trees: */
|
|
{ .compatible = "mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
|
|
/* binding used by efika: */
|
|
{ .compatible = "mpc5200-serial", .data = &mpc52xx_psc_ops, },
|
|
#endif
|
|
#ifdef CONFIG_PPC_MPC512x
|
|
{ .compatible = "fsl,mpc5121-psc-uart", .data = &mpc512x_psc_ops, },
|
|
#endif
|
|
{},
|
|
};
|
|
|
|
static int __devinit
|
|
mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
|
|
{
|
|
int idx = -1;
|
|
unsigned int uartclk;
|
|
struct uart_port *port = NULL;
|
|
struct resource res;
|
|
int ret;
|
|
|
|
dev_dbg(&op->dev, "mpc52xx_uart_probe(op=%p, match=%p)\n", op, match);
|
|
|
|
/* Check validity & presence */
|
|
for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++)
|
|
if (mpc52xx_uart_nodes[idx] == op->node)
|
|
break;
|
|
if (idx >= MPC52xx_PSC_MAXNUM)
|
|
return -EINVAL;
|
|
pr_debug("Found %s assigned to ttyPSC%x\n",
|
|
mpc52xx_uart_nodes[idx]->full_name, idx);
|
|
|
|
uartclk = psc_ops->getuartclk(op->node);
|
|
if (uartclk == 0) {
|
|
dev_dbg(&op->dev, "Could not find uart clock frequency!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Init the port structure */
|
|
port = &mpc52xx_uart_ports[idx];
|
|
|
|
spin_lock_init(&port->lock);
|
|
port->uartclk = uartclk;
|
|
port->fifosize = 512;
|
|
port->iotype = UPIO_MEM;
|
|
port->flags = UPF_BOOT_AUTOCONF |
|
|
(uart_console(port) ? 0 : UPF_IOREMAP);
|
|
port->line = idx;
|
|
port->ops = &mpc52xx_uart_ops;
|
|
port->dev = &op->dev;
|
|
|
|
/* Search for IRQ and mapbase */
|
|
ret = of_address_to_resource(op->node, 0, &res);
|
|
if (ret)
|
|
return ret;
|
|
|
|
port->mapbase = res.start;
|
|
port->irq = irq_of_parse_and_map(op->node, 0);
|
|
|
|
dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n",
|
|
(void *)port->mapbase, port->irq, port->uartclk);
|
|
|
|
if ((port->irq == NO_IRQ) || !port->mapbase) {
|
|
printk(KERN_ERR "Could not allocate resources for PSC\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Add the port to the uart sub-system */
|
|
ret = uart_add_one_port(&mpc52xx_uart_driver, port);
|
|
if (!ret)
|
|
dev_set_drvdata(&op->dev, (void *)port);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
mpc52xx_uart_of_remove(struct of_device *op)
|
|
{
|
|
struct uart_port *port = dev_get_drvdata(&op->dev);
|
|
dev_set_drvdata(&op->dev, NULL);
|
|
|
|
if (port) {
|
|
uart_remove_one_port(&mpc52xx_uart_driver, port);
|
|
irq_dispose_mapping(port->irq);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int
|
|
mpc52xx_uart_of_suspend(struct of_device *op, pm_message_t state)
|
|
{
|
|
struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev);
|
|
|
|
if (port)
|
|
uart_suspend_port(&mpc52xx_uart_driver, port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mpc52xx_uart_of_resume(struct of_device *op)
|
|
{
|
|
struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev);
|
|
|
|
if (port)
|
|
uart_resume_port(&mpc52xx_uart_driver, port);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void
|
|
mpc52xx_uart_of_assign(struct device_node *np, int idx)
|
|
{
|
|
int free_idx = -1;
|
|
int i;
|
|
|
|
/* Find the first free node */
|
|
for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) {
|
|
if (mpc52xx_uart_nodes[i] == NULL) {
|
|
free_idx = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if ((idx < 0) || (idx >= MPC52xx_PSC_MAXNUM))
|
|
idx = free_idx;
|
|
|
|
if (idx < 0)
|
|
return; /* No free slot; abort */
|
|
|
|
of_node_get(np);
|
|
/* If the slot is already occupied, then swap slots */
|
|
if (mpc52xx_uart_nodes[idx] && (free_idx != -1))
|
|
mpc52xx_uart_nodes[free_idx] = mpc52xx_uart_nodes[idx];
|
|
mpc52xx_uart_nodes[idx] = np;
|
|
}
|
|
|
|
static void
|
|
mpc52xx_uart_of_enumerate(void)
|
|
{
|
|
static int enum_done;
|
|
struct device_node *np;
|
|
const unsigned int *devno;
|
|
const struct of_device_id *match;
|
|
int i;
|
|
|
|
if (enum_done)
|
|
return;
|
|
|
|
for_each_node_by_type(np, "serial") {
|
|
match = of_match_node(mpc52xx_uart_of_match, np);
|
|
if (!match)
|
|
continue;
|
|
|
|
psc_ops = match->data;
|
|
|
|
/* Is a particular device number requested? */
|
|
devno = of_get_property(np, "port-number", NULL);
|
|
mpc52xx_uart_of_assign(np, devno ? *devno : -1);
|
|
}
|
|
|
|
enum_done = 1;
|
|
|
|
for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) {
|
|
if (mpc52xx_uart_nodes[i])
|
|
pr_debug("%s assigned to ttyPSC%x\n",
|
|
mpc52xx_uart_nodes[i]->full_name, i);
|
|
}
|
|
}
|
|
|
|
MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match);
|
|
|
|
static struct of_platform_driver mpc52xx_uart_of_driver = {
|
|
.match_table = mpc52xx_uart_of_match,
|
|
.probe = mpc52xx_uart_of_probe,
|
|
.remove = mpc52xx_uart_of_remove,
|
|
#ifdef CONFIG_PM
|
|
.suspend = mpc52xx_uart_of_suspend,
|
|
.resume = mpc52xx_uart_of_resume,
|
|
#endif
|
|
.driver = {
|
|
.name = "mpc52xx-psc-uart",
|
|
},
|
|
};
|
|
|
|
|
|
/* ======================================================================== */
|
|
/* Module */
|
|
/* ======================================================================== */
|
|
|
|
static int __init
|
|
mpc52xx_uart_init(void)
|
|
{
|
|
int ret;
|
|
|
|
printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n");
|
|
|
|
ret = uart_register_driver(&mpc52xx_uart_driver);
|
|
if (ret) {
|
|
printk(KERN_ERR "%s: uart_register_driver failed (%i)\n",
|
|
__FILE__, ret);
|
|
return ret;
|
|
}
|
|
|
|
mpc52xx_uart_of_enumerate();
|
|
|
|
ret = of_register_platform_driver(&mpc52xx_uart_of_driver);
|
|
if (ret) {
|
|
printk(KERN_ERR "%s: of_register_platform_driver failed (%i)\n",
|
|
__FILE__, ret);
|
|
uart_unregister_driver(&mpc52xx_uart_driver);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit
|
|
mpc52xx_uart_exit(void)
|
|
{
|
|
of_unregister_platform_driver(&mpc52xx_uart_of_driver);
|
|
uart_unregister_driver(&mpc52xx_uart_driver);
|
|
}
|
|
|
|
|
|
module_init(mpc52xx_uart_init);
|
|
module_exit(mpc52xx_uart_exit);
|
|
|
|
MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>");
|
|
MODULE_DESCRIPTION("Freescale MPC52xx PSC UART");
|
|
MODULE_LICENSE("GPL");
|