275 строки
6.5 KiB
C
275 строки
6.5 KiB
C
/*
|
|
* linux/arch/alpha/kernel/sys_nautilus.c
|
|
*
|
|
* Copyright (C) 1995 David A Rusling
|
|
* Copyright (C) 1998 Richard Henderson
|
|
* Copyright (C) 1999 Alpha Processor, Inc.,
|
|
* (David Daniel, Stig Telfer, Soohoon Lee)
|
|
*
|
|
* Code supporting NAUTILUS systems.
|
|
*
|
|
*
|
|
* NAUTILUS has the following I/O features:
|
|
*
|
|
* a) Driven by AMD 751 aka IRONGATE (northbridge):
|
|
* 4 PCI slots
|
|
* 1 AGP slot
|
|
*
|
|
* b) Driven by ALI M1543C (southbridge)
|
|
* 2 ISA slots
|
|
* 2 IDE connectors
|
|
* 1 dual drive capable FDD controller
|
|
* 2 serial ports
|
|
* 1 ECP/EPP/SP parallel port
|
|
* 2 USB ports
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/bootmem.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/ptrace.h>
|
|
#include <asm/system.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mmu_context.h>
|
|
#include <asm/io.h>
|
|
#include <asm/pci.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/core_irongate.h>
|
|
#include <asm/hwrpb.h>
|
|
#include <asm/tlbflush.h>
|
|
|
|
#include "proto.h"
|
|
#include "err_impl.h"
|
|
#include "irq_impl.h"
|
|
#include "pci_impl.h"
|
|
#include "machvec_impl.h"
|
|
|
|
|
|
static void __init
|
|
nautilus_init_irq(void)
|
|
{
|
|
if (alpha_using_srm) {
|
|
alpha_mv.device_interrupt = srm_device_interrupt;
|
|
}
|
|
|
|
init_i8259a_irqs();
|
|
common_init_isa_dma();
|
|
}
|
|
|
|
static int __init
|
|
nautilus_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
/* Preserve the IRQ set up by the console. */
|
|
|
|
u8 irq;
|
|
/* UP1500: AGP INTA is actually routed to IRQ 5, not IRQ 10 as
|
|
console reports. Check the device id of AGP bridge to distinguish
|
|
UP1500 from UP1000/1100. Note: 'pin' is 2 due to bridge swizzle. */
|
|
if (slot == 1 && pin == 2 &&
|
|
dev->bus->self && dev->bus->self->device == 0x700f)
|
|
return 5;
|
|
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
|
|
return irq;
|
|
}
|
|
|
|
void
|
|
nautilus_kill_arch(int mode)
|
|
{
|
|
struct pci_bus *bus = pci_isa_hose->bus;
|
|
u32 pmuport;
|
|
int off;
|
|
|
|
switch (mode) {
|
|
case LINUX_REBOOT_CMD_RESTART:
|
|
if (! alpha_using_srm) {
|
|
u8 t8;
|
|
pci_bus_read_config_byte(bus, 0x38, 0x43, &t8);
|
|
pci_bus_write_config_byte(bus, 0x38, 0x43, t8 | 0x80);
|
|
outb(1, 0x92);
|
|
outb(0, 0x92);
|
|
/* NOTREACHED */
|
|
}
|
|
break;
|
|
|
|
case LINUX_REBOOT_CMD_POWER_OFF:
|
|
/* Assume M1543C */
|
|
off = 0x2000; /* SLP_TYPE = 0, SLP_EN = 1 */
|
|
pci_bus_read_config_dword(bus, 0x88, 0x10, &pmuport);
|
|
if (!pmuport) {
|
|
/* M1535D/D+ */
|
|
off = 0x3400; /* SLP_TYPE = 5, SLP_EN = 1 */
|
|
pci_bus_read_config_dword(bus, 0x88, 0xe0, &pmuport);
|
|
}
|
|
pmuport &= 0xfffe;
|
|
outw(0xffff, pmuport); /* Clear pending events. */
|
|
outw(off, pmuport + 4);
|
|
/* NOTREACHED */
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Perform analysis of a machine check that arrived from the system (NMI) */
|
|
|
|
static void
|
|
naut_sys_machine_check(unsigned long vector, unsigned long la_ptr,
|
|
struct pt_regs *regs)
|
|
{
|
|
printk("PC %lx RA %lx\n", regs->pc, regs->r26);
|
|
irongate_pci_clr_err();
|
|
}
|
|
|
|
/* Machine checks can come from two sources - those on the CPU and those
|
|
in the system. They are analysed separately but all starts here. */
|
|
|
|
void
|
|
nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
|
|
{
|
|
char *mchk_class;
|
|
|
|
/* Now for some analysis. Machine checks fall into two classes --
|
|
those picked up by the system, and those picked up by the CPU.
|
|
Add to that the two levels of severity - correctable or not. */
|
|
|
|
if (vector == SCB_Q_SYSMCHK
|
|
&& ((IRONGATE0->dramms & 0x300) == 0x300)) {
|
|
unsigned long nmi_ctl;
|
|
|
|
/* Clear ALI NMI */
|
|
nmi_ctl = inb(0x61);
|
|
nmi_ctl |= 0x0c;
|
|
outb(nmi_ctl, 0x61);
|
|
nmi_ctl &= ~0x0c;
|
|
outb(nmi_ctl, 0x61);
|
|
|
|
/* Write again clears error bits. */
|
|
IRONGATE0->stat_cmd = IRONGATE0->stat_cmd & ~0x100;
|
|
mb();
|
|
IRONGATE0->stat_cmd;
|
|
|
|
/* Write again clears error bits. */
|
|
IRONGATE0->dramms = IRONGATE0->dramms;
|
|
mb();
|
|
IRONGATE0->dramms;
|
|
|
|
draina();
|
|
wrmces(0x7);
|
|
mb();
|
|
return;
|
|
}
|
|
|
|
if (vector == SCB_Q_SYSERR)
|
|
mchk_class = "Correctable";
|
|
else if (vector == SCB_Q_SYSMCHK)
|
|
mchk_class = "Fatal";
|
|
else {
|
|
ev6_machine_check(vector, la_ptr);
|
|
return;
|
|
}
|
|
|
|
printk(KERN_CRIT "NAUTILUS Machine check 0x%lx "
|
|
"[%s System Machine Check (NMI)]\n",
|
|
vector, mchk_class);
|
|
|
|
naut_sys_machine_check(vector, la_ptr, get_irq_regs());
|
|
|
|
/* Tell the PALcode to clear the machine check */
|
|
draina();
|
|
wrmces(0x7);
|
|
mb();
|
|
}
|
|
|
|
extern void free_reserved_mem(void *, void *);
|
|
|
|
static struct resource irongate_mem = {
|
|
.name = "Irongate PCI MEM",
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
void __init
|
|
nautilus_init_pci(void)
|
|
{
|
|
struct pci_controller *hose = hose_head;
|
|
struct pci_bus *bus;
|
|
struct pci_dev *irongate;
|
|
unsigned long bus_align, bus_size, pci_mem;
|
|
unsigned long memtop = max_low_pfn << PAGE_SHIFT;
|
|
|
|
/* Scan our single hose. */
|
|
bus = pci_scan_bus(0, alpha_mv.pci_ops, hose);
|
|
hose->bus = bus;
|
|
|
|
irongate = pci_get_bus_and_slot(0, 0);
|
|
bus->self = irongate;
|
|
bus->resource[1] = &irongate_mem;
|
|
|
|
pci_bus_size_bridges(bus);
|
|
|
|
/* IO port range. */
|
|
bus->resource[0]->start = 0;
|
|
bus->resource[0]->end = 0xffff;
|
|
|
|
/* Set up PCI memory range - limit is hardwired to 0xffffffff,
|
|
base must be at aligned to 16Mb. */
|
|
bus_align = bus->resource[1]->start;
|
|
bus_size = bus->resource[1]->end + 1 - bus_align;
|
|
if (bus_align < 0x1000000UL)
|
|
bus_align = 0x1000000UL;
|
|
|
|
pci_mem = (0x100000000UL - bus_size) & -bus_align;
|
|
|
|
bus->resource[1]->start = pci_mem;
|
|
bus->resource[1]->end = 0xffffffffUL;
|
|
if (request_resource(&iomem_resource, bus->resource[1]) < 0)
|
|
printk(KERN_ERR "Failed to request MEM on hose 0\n");
|
|
|
|
if (pci_mem < memtop)
|
|
memtop = pci_mem;
|
|
if (memtop > alpha_mv.min_mem_address) {
|
|
free_reserved_mem(__va(alpha_mv.min_mem_address),
|
|
__va(memtop));
|
|
printk("nautilus_init_pci: %ldk freed\n",
|
|
(memtop - alpha_mv.min_mem_address) >> 10);
|
|
}
|
|
|
|
if ((IRONGATE0->dev_vendor >> 16) > 0x7006) /* Albacore? */
|
|
IRONGATE0->pci_mem = pci_mem;
|
|
|
|
pci_bus_assign_resources(bus);
|
|
pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq);
|
|
}
|
|
|
|
/*
|
|
* The System Vectors
|
|
*/
|
|
|
|
struct alpha_machine_vector nautilus_mv __initmv = {
|
|
.vector_name = "Nautilus",
|
|
DO_EV6_MMU,
|
|
DO_DEFAULT_RTC,
|
|
DO_IRONGATE_IO,
|
|
.machine_check = nautilus_machine_check,
|
|
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
|
|
.min_io_address = DEFAULT_IO_BASE,
|
|
.min_mem_address = IRONGATE_DEFAULT_MEM_BASE,
|
|
|
|
.nr_irqs = 16,
|
|
.device_interrupt = isa_device_interrupt,
|
|
|
|
.init_arch = irongate_init_arch,
|
|
.init_irq = nautilus_init_irq,
|
|
.init_rtc = common_init_rtc,
|
|
.init_pci = nautilus_init_pci,
|
|
.kill_arch = nautilus_kill_arch,
|
|
.pci_map_irq = nautilus_map_irq,
|
|
.pci_swizzle = common_swizzle,
|
|
};
|
|
ALIAS_MV(nautilus)
|