265 строки
7.2 KiB
C
265 строки
7.2 KiB
C
/*
|
|
* at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x
|
|
*
|
|
* Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
|
|
* Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
|
|
* Converted to ClockSource/ClockEvents by David Brownell.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "AT91: PIT: " fmt
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define AT91_PIT_MR 0x00 /* Mode Register */
|
|
#define AT91_PIT_PITIEN BIT(25) /* Timer Interrupt Enable */
|
|
#define AT91_PIT_PITEN BIT(24) /* Timer Enabled */
|
|
#define AT91_PIT_PIV GENMASK(19, 0) /* Periodic Interval Value */
|
|
|
|
#define AT91_PIT_SR 0x04 /* Status Register */
|
|
#define AT91_PIT_PITS BIT(0) /* Timer Status */
|
|
|
|
#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */
|
|
#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */
|
|
#define AT91_PIT_PICNT GENMASK(31, 20) /* Interval Counter */
|
|
#define AT91_PIT_CPIV GENMASK(19, 0) /* Inverval Value */
|
|
|
|
#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV)
|
|
#define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20)
|
|
|
|
struct pit_data {
|
|
struct clock_event_device clkevt;
|
|
struct clocksource clksrc;
|
|
|
|
void __iomem *base;
|
|
u32 cycle;
|
|
u32 cnt;
|
|
unsigned int irq;
|
|
struct clk *mck;
|
|
};
|
|
|
|
static inline struct pit_data *clksrc_to_pit_data(struct clocksource *clksrc)
|
|
{
|
|
return container_of(clksrc, struct pit_data, clksrc);
|
|
}
|
|
|
|
static inline struct pit_data *clkevt_to_pit_data(struct clock_event_device *clkevt)
|
|
{
|
|
return container_of(clkevt, struct pit_data, clkevt);
|
|
}
|
|
|
|
static inline unsigned int pit_read(void __iomem *base, unsigned int reg_offset)
|
|
{
|
|
return readl_relaxed(base + reg_offset);
|
|
}
|
|
|
|
static inline void pit_write(void __iomem *base, unsigned int reg_offset, unsigned long value)
|
|
{
|
|
writel_relaxed(value, base + reg_offset);
|
|
}
|
|
|
|
/*
|
|
* Clocksource: just a monotonic counter of MCK/16 cycles.
|
|
* We don't care whether or not PIT irqs are enabled.
|
|
*/
|
|
static cycle_t read_pit_clk(struct clocksource *cs)
|
|
{
|
|
struct pit_data *data = clksrc_to_pit_data(cs);
|
|
unsigned long flags;
|
|
u32 elapsed;
|
|
u32 t;
|
|
|
|
raw_local_irq_save(flags);
|
|
elapsed = data->cnt;
|
|
t = pit_read(data->base, AT91_PIT_PIIR);
|
|
raw_local_irq_restore(flags);
|
|
|
|
elapsed += PIT_PICNT(t) * data->cycle;
|
|
elapsed += PIT_CPIV(t);
|
|
return elapsed;
|
|
}
|
|
|
|
/*
|
|
* Clockevent device: interrupts every 1/HZ (== pit_cycles * MCK/16)
|
|
*/
|
|
static void
|
|
pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
|
|
{
|
|
struct pit_data *data = clkevt_to_pit_data(dev);
|
|
|
|
switch (mode) {
|
|
case CLOCK_EVT_MODE_PERIODIC:
|
|
/* update clocksource counter */
|
|
data->cnt += data->cycle * PIT_PICNT(pit_read(data->base, AT91_PIT_PIVR));
|
|
pit_write(data->base, AT91_PIT_MR,
|
|
(data->cycle - 1) | AT91_PIT_PITEN | AT91_PIT_PITIEN);
|
|
break;
|
|
case CLOCK_EVT_MODE_ONESHOT:
|
|
BUG();
|
|
/* FALLTHROUGH */
|
|
case CLOCK_EVT_MODE_SHUTDOWN:
|
|
case CLOCK_EVT_MODE_UNUSED:
|
|
/* disable irq, leaving the clocksource active */
|
|
pit_write(data->base, AT91_PIT_MR,
|
|
(data->cycle - 1) | AT91_PIT_PITEN);
|
|
break;
|
|
case CLOCK_EVT_MODE_RESUME:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void at91sam926x_pit_suspend(struct clock_event_device *cedev)
|
|
{
|
|
struct pit_data *data = clkevt_to_pit_data(cedev);
|
|
|
|
/* Disable timer */
|
|
pit_write(data->base, AT91_PIT_MR, 0);
|
|
}
|
|
|
|
static void at91sam926x_pit_reset(struct pit_data *data)
|
|
{
|
|
/* Disable timer and irqs */
|
|
pit_write(data->base, AT91_PIT_MR, 0);
|
|
|
|
/* Clear any pending interrupts, wait for PIT to stop counting */
|
|
while (PIT_CPIV(pit_read(data->base, AT91_PIT_PIVR)) != 0)
|
|
cpu_relax();
|
|
|
|
/* Start PIT but don't enable IRQ */
|
|
pit_write(data->base, AT91_PIT_MR,
|
|
(data->cycle - 1) | AT91_PIT_PITEN);
|
|
}
|
|
|
|
static void at91sam926x_pit_resume(struct clock_event_device *cedev)
|
|
{
|
|
struct pit_data *data = clkevt_to_pit_data(cedev);
|
|
|
|
at91sam926x_pit_reset(data);
|
|
}
|
|
|
|
/*
|
|
* IRQ handler for the timer.
|
|
*/
|
|
static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct pit_data *data = dev_id;
|
|
|
|
/*
|
|
* irqs should be disabled here, but as the irq is shared they are only
|
|
* guaranteed to be off if the timer irq is registered first.
|
|
*/
|
|
WARN_ON_ONCE(!irqs_disabled());
|
|
|
|
/* The PIT interrupt may be disabled, and is shared */
|
|
if ((data->clkevt.mode == CLOCK_EVT_MODE_PERIODIC) &&
|
|
(pit_read(data->base, AT91_PIT_SR) & AT91_PIT_PITS)) {
|
|
unsigned nr_ticks;
|
|
|
|
/* Get number of ticks performed before irq, and ack it */
|
|
nr_ticks = PIT_PICNT(pit_read(data->base, AT91_PIT_PIVR));
|
|
do {
|
|
data->cnt += data->cycle;
|
|
data->clkevt.event_handler(&data->clkevt);
|
|
nr_ticks--;
|
|
} while (nr_ticks);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/*
|
|
* Set up both clocksource and clockevent support.
|
|
*/
|
|
static void __init at91sam926x_pit_common_init(struct pit_data *data)
|
|
{
|
|
unsigned long pit_rate;
|
|
unsigned bits;
|
|
int ret;
|
|
|
|
/*
|
|
* Use our actual MCK to figure out how many MCK/16 ticks per
|
|
* 1/HZ period (instead of a compile-time constant LATCH).
|
|
*/
|
|
pit_rate = clk_get_rate(data->mck) / 16;
|
|
data->cycle = DIV_ROUND_CLOSEST(pit_rate, HZ);
|
|
WARN_ON(((data->cycle - 1) & ~AT91_PIT_PIV) != 0);
|
|
|
|
/* Initialize and enable the timer */
|
|
at91sam926x_pit_reset(data);
|
|
|
|
/*
|
|
* Register clocksource. The high order bits of PIV are unused,
|
|
* so this isn't a 32-bit counter unless we get clockevent irqs.
|
|
*/
|
|
bits = 12 /* PICNT */ + ilog2(data->cycle) /* PIV */;
|
|
data->clksrc.mask = CLOCKSOURCE_MASK(bits);
|
|
data->clksrc.name = "pit";
|
|
data->clksrc.rating = 175;
|
|
data->clksrc.read = read_pit_clk,
|
|
data->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
|
clocksource_register_hz(&data->clksrc, pit_rate);
|
|
|
|
/* Set up irq handler */
|
|
ret = request_irq(data->irq, at91sam926x_pit_interrupt,
|
|
IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
|
|
"at91_tick", data);
|
|
if (ret)
|
|
panic(pr_fmt("Unable to setup IRQ\n"));
|
|
|
|
/* Set up and register clockevents */
|
|
data->clkevt.name = "pit";
|
|
data->clkevt.features = CLOCK_EVT_FEAT_PERIODIC;
|
|
data->clkevt.shift = 32;
|
|
data->clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, data->clkevt.shift);
|
|
data->clkevt.rating = 100;
|
|
data->clkevt.cpumask = cpumask_of(0);
|
|
|
|
data->clkevt.set_mode = pit_clkevt_mode;
|
|
data->clkevt.resume = at91sam926x_pit_resume;
|
|
data->clkevt.suspend = at91sam926x_pit_suspend;
|
|
clockevents_register_device(&data->clkevt);
|
|
}
|
|
|
|
static void __init at91sam926x_pit_dt_init(struct device_node *node)
|
|
{
|
|
struct pit_data *data;
|
|
|
|
data = kzalloc(sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
panic(pr_fmt("Unable to allocate memory\n"));
|
|
|
|
data->base = of_iomap(node, 0);
|
|
if (!data->base)
|
|
panic(pr_fmt("Could not map PIT address\n"));
|
|
|
|
data->mck = of_clk_get(node, 0);
|
|
if (IS_ERR(data->mck))
|
|
/* Fallback on clkdev for !CCF-based boards */
|
|
data->mck = clk_get(NULL, "mck");
|
|
|
|
if (IS_ERR(data->mck))
|
|
panic(pr_fmt("Unable to get mck clk\n"));
|
|
|
|
/* Get the interrupts property */
|
|
data->irq = irq_of_parse_and_map(node, 0);
|
|
if (!data->irq)
|
|
panic(pr_fmt("Unable to get IRQ from DT\n"));
|
|
|
|
at91sam926x_pit_common_init(data);
|
|
}
|
|
CLOCKSOURCE_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit",
|
|
at91sam926x_pit_dt_init);
|