384 строки
10 KiB
C
384 строки
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Real Time Clock driver for Marvell 88PM860x PMIC
|
|
*
|
|
* Copyright (c) 2010 Marvell International Ltd.
|
|
* Author: Haojian Zhuang <haojian.zhuang@marvell.com>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/88pm860x.h>
|
|
|
|
#define VRTC_CALIBRATION
|
|
|
|
struct pm860x_rtc_info {
|
|
struct pm860x_chip *chip;
|
|
struct i2c_client *i2c;
|
|
struct rtc_device *rtc_dev;
|
|
struct device *dev;
|
|
struct delayed_work calib_work;
|
|
|
|
int irq;
|
|
int vrtc;
|
|
};
|
|
|
|
#define REG_VRTC_MEAS1 0x7D
|
|
|
|
#define REG0_ADDR 0xB0
|
|
#define REG1_ADDR 0xB2
|
|
#define REG2_ADDR 0xB4
|
|
#define REG3_ADDR 0xB6
|
|
|
|
#define REG0_DATA 0xB1
|
|
#define REG1_DATA 0xB3
|
|
#define REG2_DATA 0xB5
|
|
#define REG3_DATA 0xB7
|
|
|
|
/* bit definitions of Measurement Enable Register 2 (0x51) */
|
|
#define MEAS2_VRTC (1 << 0)
|
|
|
|
/* bit definitions of RTC Register 1 (0xA0) */
|
|
#define ALARM_EN (1 << 3)
|
|
#define ALARM_WAKEUP (1 << 4)
|
|
#define ALARM (1 << 5)
|
|
#define RTC1_USE_XO (1 << 7)
|
|
|
|
#define VRTC_CALIB_INTERVAL (HZ * 60 * 10) /* 10 minutes */
|
|
|
|
static irqreturn_t rtc_update_handler(int irq, void *data)
|
|
{
|
|
struct pm860x_rtc_info *info = (struct pm860x_rtc_info *)data;
|
|
int mask;
|
|
|
|
mask = ALARM | ALARM_WAKEUP;
|
|
pm860x_set_bits(info->i2c, PM8607_RTC1, mask | ALARM_EN, mask);
|
|
rtc_update_irq(info->rtc_dev, 1, RTC_AF);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int pm860x_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
|
{
|
|
struct pm860x_rtc_info *info = dev_get_drvdata(dev);
|
|
|
|
if (enabled)
|
|
pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, ALARM_EN);
|
|
else
|
|
pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, 0);
|
|
return 0;
|
|
}
|
|
|
|
static int pm860x_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct pm860x_rtc_info *info = dev_get_drvdata(dev);
|
|
unsigned char buf[8];
|
|
unsigned long ticks, base, data;
|
|
|
|
pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
|
|
dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
|
|
buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
|
|
base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
|
|
(buf[5] << 8) | buf[7];
|
|
|
|
/* load 32-bit read-only counter */
|
|
pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
|
|
data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
|
|
(buf[1] << 8) | buf[0];
|
|
ticks = base + data;
|
|
dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
|
|
base, data, ticks);
|
|
|
|
rtc_time64_to_tm(ticks, tm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pm860x_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct pm860x_rtc_info *info = dev_get_drvdata(dev);
|
|
unsigned char buf[4];
|
|
unsigned long ticks, base, data;
|
|
|
|
ticks = rtc_tm_to_time64(tm);
|
|
|
|
/* load 32-bit read-only counter */
|
|
pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
|
|
data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
|
|
(buf[1] << 8) | buf[0];
|
|
base = ticks - data;
|
|
dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
|
|
base, data, ticks);
|
|
|
|
pm860x_page_reg_write(info->i2c, REG0_DATA, (base >> 24) & 0xFF);
|
|
pm860x_page_reg_write(info->i2c, REG1_DATA, (base >> 16) & 0xFF);
|
|
pm860x_page_reg_write(info->i2c, REG2_DATA, (base >> 8) & 0xFF);
|
|
pm860x_page_reg_write(info->i2c, REG3_DATA, base & 0xFF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pm860x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct pm860x_rtc_info *info = dev_get_drvdata(dev);
|
|
unsigned char buf[8];
|
|
unsigned long ticks, base, data;
|
|
int ret;
|
|
|
|
pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
|
|
dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
|
|
buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
|
|
base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
|
|
(buf[5] << 8) | buf[7];
|
|
|
|
pm860x_bulk_read(info->i2c, PM8607_RTC_EXPIRE1, 4, buf);
|
|
data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
|
|
(buf[1] << 8) | buf[0];
|
|
ticks = base + data;
|
|
dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
|
|
base, data, ticks);
|
|
|
|
rtc_time64_to_tm(ticks, &alrm->time);
|
|
ret = pm860x_reg_read(info->i2c, PM8607_RTC1);
|
|
alrm->enabled = (ret & ALARM_EN) ? 1 : 0;
|
|
alrm->pending = (ret & (ALARM | ALARM_WAKEUP)) ? 1 : 0;
|
|
return 0;
|
|
}
|
|
|
|
static int pm860x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct pm860x_rtc_info *info = dev_get_drvdata(dev);
|
|
unsigned long ticks, base, data;
|
|
unsigned char buf[8];
|
|
int mask;
|
|
|
|
pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, 0);
|
|
|
|
pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
|
|
dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
|
|
buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
|
|
base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
|
|
(buf[5] << 8) | buf[7];
|
|
|
|
ticks = rtc_tm_to_time64(&alrm->time);
|
|
data = ticks - base;
|
|
|
|
buf[0] = data & 0xff;
|
|
buf[1] = (data >> 8) & 0xff;
|
|
buf[2] = (data >> 16) & 0xff;
|
|
buf[3] = (data >> 24) & 0xff;
|
|
pm860x_bulk_write(info->i2c, PM8607_RTC_EXPIRE1, 4, buf);
|
|
if (alrm->enabled) {
|
|
mask = ALARM | ALARM_WAKEUP | ALARM_EN;
|
|
pm860x_set_bits(info->i2c, PM8607_RTC1, mask, mask);
|
|
} else {
|
|
mask = ALARM | ALARM_WAKEUP | ALARM_EN;
|
|
pm860x_set_bits(info->i2c, PM8607_RTC1, mask,
|
|
ALARM | ALARM_WAKEUP);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct rtc_class_ops pm860x_rtc_ops = {
|
|
.read_time = pm860x_rtc_read_time,
|
|
.set_time = pm860x_rtc_set_time,
|
|
.read_alarm = pm860x_rtc_read_alarm,
|
|
.set_alarm = pm860x_rtc_set_alarm,
|
|
.alarm_irq_enable = pm860x_rtc_alarm_irq_enable,
|
|
};
|
|
|
|
#ifdef VRTC_CALIBRATION
|
|
static void calibrate_vrtc_work(struct work_struct *work)
|
|
{
|
|
struct pm860x_rtc_info *info = container_of(work,
|
|
struct pm860x_rtc_info, calib_work.work);
|
|
unsigned char buf[2];
|
|
unsigned int sum, data, mean, vrtc_set;
|
|
int i;
|
|
|
|
for (i = 0, sum = 0; i < 16; i++) {
|
|
msleep(100);
|
|
pm860x_bulk_read(info->i2c, REG_VRTC_MEAS1, 2, buf);
|
|
data = (buf[0] << 4) | buf[1];
|
|
data = (data * 5400) >> 12; /* convert to mv */
|
|
sum += data;
|
|
}
|
|
mean = sum >> 4;
|
|
vrtc_set = 2700 + (info->vrtc & 0x3) * 200;
|
|
dev_dbg(info->dev, "mean:%d, vrtc_set:%d\n", mean, vrtc_set);
|
|
|
|
sum = pm860x_reg_read(info->i2c, PM8607_RTC_MISC1);
|
|
data = sum & 0x3;
|
|
if ((mean + 200) < vrtc_set) {
|
|
/* try higher voltage */
|
|
if (++data == 4)
|
|
goto out;
|
|
data = (sum & 0xf8) | (data & 0x3);
|
|
pm860x_reg_write(info->i2c, PM8607_RTC_MISC1, data);
|
|
} else if ((mean - 200) > vrtc_set) {
|
|
/* try lower voltage */
|
|
if (data-- == 0)
|
|
goto out;
|
|
data = (sum & 0xf8) | (data & 0x3);
|
|
pm860x_reg_write(info->i2c, PM8607_RTC_MISC1, data);
|
|
} else
|
|
goto out;
|
|
dev_dbg(info->dev, "set 0x%x to RTC_MISC1\n", data);
|
|
/* trigger next calibration since VRTC is updated */
|
|
schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL);
|
|
return;
|
|
out:
|
|
/* disable measurement */
|
|
pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, 0);
|
|
dev_dbg(info->dev, "finish VRTC calibration\n");
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_OF
|
|
static int pm860x_rtc_dt_init(struct platform_device *pdev,
|
|
struct pm860x_rtc_info *info)
|
|
{
|
|
struct device_node *np = pdev->dev.parent->of_node;
|
|
int ret;
|
|
if (!np)
|
|
return -ENODEV;
|
|
np = of_get_child_by_name(np, "rtc");
|
|
if (!np) {
|
|
dev_err(&pdev->dev, "failed to find rtc node\n");
|
|
return -ENODEV;
|
|
}
|
|
ret = of_property_read_u32(np, "marvell,88pm860x-vrtc", &info->vrtc);
|
|
if (ret)
|
|
info->vrtc = 0;
|
|
of_node_put(np);
|
|
return 0;
|
|
}
|
|
#else
|
|
#define pm860x_rtc_dt_init(x, y) do { } while (0)
|
|
#endif
|
|
|
|
static int pm860x_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
|
|
struct pm860x_rtc_info *info;
|
|
int ret;
|
|
|
|
info = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_rtc_info),
|
|
GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
info->irq = platform_get_irq(pdev, 0);
|
|
if (info->irq < 0)
|
|
return info->irq;
|
|
|
|
info->chip = chip;
|
|
info->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
|
|
info->dev = &pdev->dev;
|
|
dev_set_drvdata(&pdev->dev, info);
|
|
|
|
info->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
|
|
if (IS_ERR(info->rtc_dev))
|
|
return PTR_ERR(info->rtc_dev);
|
|
|
|
ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
|
|
rtc_update_handler, IRQF_ONESHOT, "rtc",
|
|
info);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
|
|
info->irq, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* set addresses of 32-bit base value for RTC time */
|
|
pm860x_page_reg_write(info->i2c, REG0_ADDR, REG0_DATA);
|
|
pm860x_page_reg_write(info->i2c, REG1_ADDR, REG1_DATA);
|
|
pm860x_page_reg_write(info->i2c, REG2_ADDR, REG2_DATA);
|
|
pm860x_page_reg_write(info->i2c, REG3_ADDR, REG3_DATA);
|
|
|
|
pm860x_rtc_dt_init(pdev, info);
|
|
|
|
info->rtc_dev->ops = &pm860x_rtc_ops;
|
|
info->rtc_dev->range_max = U32_MAX;
|
|
|
|
ret = devm_rtc_register_device(info->rtc_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* enable internal XO instead of internal 3.25MHz clock since it can
|
|
* free running in PMIC power-down state.
|
|
*/
|
|
pm860x_set_bits(info->i2c, PM8607_RTC1, RTC1_USE_XO, RTC1_USE_XO);
|
|
|
|
#ifdef VRTC_CALIBRATION
|
|
/* <00> -- 2.7V, <01> -- 2.9V, <10> -- 3.1V, <11> -- 3.3V */
|
|
pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, MEAS2_VRTC);
|
|
|
|
/* calibrate VRTC */
|
|
INIT_DELAYED_WORK(&info->calib_work, calibrate_vrtc_work);
|
|
schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL);
|
|
#endif /* VRTC_CALIBRATION */
|
|
|
|
device_init_wakeup(&pdev->dev, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pm860x_rtc_remove(struct platform_device *pdev)
|
|
{
|
|
struct pm860x_rtc_info *info = platform_get_drvdata(pdev);
|
|
|
|
#ifdef VRTC_CALIBRATION
|
|
cancel_delayed_work_sync(&info->calib_work);
|
|
/* disable measurement */
|
|
pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, 0);
|
|
#endif /* VRTC_CALIBRATION */
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int pm860x_rtc_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
if (device_may_wakeup(dev))
|
|
chip->wakeup_flag |= 1 << PM8607_IRQ_RTC;
|
|
return 0;
|
|
}
|
|
static int pm860x_rtc_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
if (device_may_wakeup(dev))
|
|
chip->wakeup_flag &= ~(1 << PM8607_IRQ_RTC);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(pm860x_rtc_pm_ops, pm860x_rtc_suspend, pm860x_rtc_resume);
|
|
|
|
static struct platform_driver pm860x_rtc_driver = {
|
|
.driver = {
|
|
.name = "88pm860x-rtc",
|
|
.pm = &pm860x_rtc_pm_ops,
|
|
},
|
|
.probe = pm860x_rtc_probe,
|
|
.remove = pm860x_rtc_remove,
|
|
};
|
|
|
|
module_platform_driver(pm860x_rtc_driver);
|
|
|
|
MODULE_DESCRIPTION("Marvell 88PM860x RTC driver");
|
|
MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
|
|
MODULE_LICENSE("GPL");
|