246 строки
6.6 KiB
C
246 строки
6.6 KiB
C
/*
|
|
* An I2C driver for the NXP PCF2127 RTC
|
|
* Copyright 2013 Til-Technologies
|
|
*
|
|
* Author: Renaud Cerrato <r.cerrato@til-technologies.fr>
|
|
*
|
|
* based on the other drivers in this same directory.
|
|
*
|
|
* http://www.nxp.com/documents/data_sheet/PCF2127AT.pdf
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/bcd.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
|
|
#define DRV_VERSION "0.0.1"
|
|
|
|
#define PCF2127_REG_CTRL1 (0x00) /* Control Register 1 */
|
|
#define PCF2127_REG_CTRL2 (0x01) /* Control Register 2 */
|
|
#define PCF2127_REG_CTRL3 (0x02) /* Control Register 3 */
|
|
#define PCF2127_REG_SC (0x03) /* datetime */
|
|
#define PCF2127_REG_MN (0x04)
|
|
#define PCF2127_REG_HR (0x05)
|
|
#define PCF2127_REG_DM (0x06)
|
|
#define PCF2127_REG_DW (0x07)
|
|
#define PCF2127_REG_MO (0x08)
|
|
#define PCF2127_REG_YR (0x09)
|
|
|
|
#define PCF2127_OSF BIT(7) /* Oscillator Fail flag */
|
|
|
|
static struct i2c_driver pcf2127_driver;
|
|
|
|
struct pcf2127 {
|
|
struct rtc_device *rtc;
|
|
int voltage_low; /* indicates if a low_voltage was detected */
|
|
int oscillator_failed; /* OSF was detected and date is unreliable */
|
|
};
|
|
|
|
/*
|
|
* In the routines that deal directly with the pcf2127 hardware, we use
|
|
* rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
|
|
*/
|
|
static int pcf2127_get_datetime(struct i2c_client *client, struct rtc_time *tm)
|
|
{
|
|
struct pcf2127 *pcf2127 = i2c_get_clientdata(client);
|
|
unsigned char buf[10] = { PCF2127_REG_CTRL1 };
|
|
|
|
/* read registers */
|
|
if (i2c_master_send(client, buf, 1) != 1 ||
|
|
i2c_master_recv(client, buf, sizeof(buf)) != sizeof(buf)) {
|
|
dev_err(&client->dev, "%s: read error\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
if (buf[PCF2127_REG_CTRL3] & 0x04) {
|
|
pcf2127->voltage_low = 1;
|
|
dev_info(&client->dev,
|
|
"low voltage detected, check/replace RTC battery.\n");
|
|
}
|
|
|
|
if (buf[PCF2127_REG_SC] & PCF2127_OSF) {
|
|
/*
|
|
* no need clear the flag here,
|
|
* it will be cleared once the new date is saved
|
|
*/
|
|
pcf2127->oscillator_failed = 1;
|
|
dev_warn(&client->dev,
|
|
"oscillator stop detected, date/time is not reliable\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(&client->dev,
|
|
"%s: raw data is cr1=%02x, cr2=%02x, cr3=%02x, "
|
|
"sec=%02x, min=%02x, hr=%02x, "
|
|
"mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
|
|
__func__,
|
|
buf[0], buf[1], buf[2],
|
|
buf[3], buf[4], buf[5],
|
|
buf[6], buf[7], buf[8], buf[9]);
|
|
|
|
|
|
tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F);
|
|
tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F);
|
|
tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */
|
|
tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F);
|
|
tm->tm_wday = buf[PCF2127_REG_DW] & 0x07;
|
|
tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
|
|
tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]);
|
|
if (tm->tm_year < 70)
|
|
tm->tm_year += 100; /* assume we are in 1970...2069 */
|
|
|
|
dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
|
|
"mday=%d, mon=%d, year=%d, wday=%d\n",
|
|
__func__,
|
|
tm->tm_sec, tm->tm_min, tm->tm_hour,
|
|
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
|
|
|
|
return rtc_valid_tm(tm);
|
|
}
|
|
|
|
static int pcf2127_set_datetime(struct i2c_client *client, struct rtc_time *tm)
|
|
{
|
|
struct pcf2127 *pcf2127 = i2c_get_clientdata(client);
|
|
unsigned char buf[8];
|
|
int i = 0, err;
|
|
|
|
dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
|
|
"mday=%d, mon=%d, year=%d, wday=%d\n",
|
|
__func__,
|
|
tm->tm_sec, tm->tm_min, tm->tm_hour,
|
|
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
|
|
|
|
/* start register address */
|
|
buf[i++] = PCF2127_REG_SC;
|
|
|
|
/* hours, minutes and seconds */
|
|
buf[i++] = bin2bcd(tm->tm_sec); /* this will also clear OSF flag */
|
|
buf[i++] = bin2bcd(tm->tm_min);
|
|
buf[i++] = bin2bcd(tm->tm_hour);
|
|
buf[i++] = bin2bcd(tm->tm_mday);
|
|
buf[i++] = tm->tm_wday & 0x07;
|
|
|
|
/* month, 1 - 12 */
|
|
buf[i++] = bin2bcd(tm->tm_mon + 1);
|
|
|
|
/* year */
|
|
buf[i++] = bin2bcd(tm->tm_year % 100);
|
|
|
|
/* write register's data */
|
|
err = i2c_master_send(client, buf, i);
|
|
if (err != i) {
|
|
dev_err(&client->dev,
|
|
"%s: err=%d", __func__, err);
|
|
return -EIO;
|
|
}
|
|
|
|
/* clear OSF flag in client data */
|
|
pcf2127->oscillator_failed = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_RTC_INTF_DEV
|
|
static int pcf2127_rtc_ioctl(struct device *dev,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct pcf2127 *pcf2127 = i2c_get_clientdata(to_i2c_client(dev));
|
|
|
|
switch (cmd) {
|
|
case RTC_VL_READ:
|
|
if (pcf2127->voltage_low)
|
|
dev_info(dev, "low voltage detected, check/replace battery\n");
|
|
if (pcf2127->oscillator_failed)
|
|
dev_info(dev, "oscillator stop detected, date/time is not reliable\n");
|
|
|
|
if (copy_to_user((void __user *)arg, &pcf2127->voltage_low,
|
|
sizeof(int)))
|
|
return -EFAULT;
|
|
return 0;
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
}
|
|
#else
|
|
#define pcf2127_rtc_ioctl NULL
|
|
#endif
|
|
|
|
static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
return pcf2127_get_datetime(to_i2c_client(dev), tm);
|
|
}
|
|
|
|
static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
return pcf2127_set_datetime(to_i2c_client(dev), tm);
|
|
}
|
|
|
|
static const struct rtc_class_ops pcf2127_rtc_ops = {
|
|
.ioctl = pcf2127_rtc_ioctl,
|
|
.read_time = pcf2127_rtc_read_time,
|
|
.set_time = pcf2127_rtc_set_time,
|
|
};
|
|
|
|
static int pcf2127_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct pcf2127 *pcf2127;
|
|
|
|
dev_dbg(&client->dev, "%s\n", __func__);
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
|
|
return -ENODEV;
|
|
|
|
pcf2127 = devm_kzalloc(&client->dev, sizeof(struct pcf2127),
|
|
GFP_KERNEL);
|
|
if (!pcf2127)
|
|
return -ENOMEM;
|
|
|
|
dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
|
|
|
|
i2c_set_clientdata(client, pcf2127);
|
|
|
|
pcf2127->rtc = devm_rtc_device_register(&client->dev,
|
|
pcf2127_driver.driver.name,
|
|
&pcf2127_rtc_ops, THIS_MODULE);
|
|
|
|
return PTR_ERR_OR_ZERO(pcf2127->rtc);
|
|
}
|
|
|
|
static const struct i2c_device_id pcf2127_id[] = {
|
|
{ "pcf2127", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, pcf2127_id);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id pcf2127_of_match[] = {
|
|
{ .compatible = "nxp,pcf2127" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, pcf2127_of_match);
|
|
#endif
|
|
|
|
static struct i2c_driver pcf2127_driver = {
|
|
.driver = {
|
|
.name = "rtc-pcf2127",
|
|
.of_match_table = of_match_ptr(pcf2127_of_match),
|
|
},
|
|
.probe = pcf2127_probe,
|
|
.id_table = pcf2127_id,
|
|
};
|
|
|
|
module_i2c_driver(pcf2127_driver);
|
|
|
|
MODULE_AUTHOR("Renaud Cerrato <r.cerrato@til-technologies.fr>");
|
|
MODULE_DESCRIPTION("NXP PCF2127 RTC driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_VERSION);
|