507 строки
14 KiB
C
507 строки
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/* Driver for Realtek PCI-Express card reader
|
|
*
|
|
* Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
|
|
*
|
|
* Author:
|
|
* Wei WANG <wei_wang@realsil.com.cn>
|
|
* Roger Tseng <rogerable@realtek.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/rtsx_pci.h>
|
|
|
|
#include "rtsx_pcr.h"
|
|
|
|
static u8 rts5227_get_ic_version(struct rtsx_pcr *pcr)
|
|
{
|
|
u8 val;
|
|
|
|
rtsx_pci_read_register(pcr, DUMMY_REG_RESET_0, &val);
|
|
return val & 0x0F;
|
|
}
|
|
|
|
static void rts5227_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
|
|
{
|
|
u8 driving_3v3[4][3] = {
|
|
{0x13, 0x13, 0x13},
|
|
{0x96, 0x96, 0x96},
|
|
{0x7F, 0x7F, 0x7F},
|
|
{0x96, 0x96, 0x96},
|
|
};
|
|
u8 driving_1v8[4][3] = {
|
|
{0x99, 0x99, 0x99},
|
|
{0xAA, 0xAA, 0xAA},
|
|
{0xFE, 0xFE, 0xFE},
|
|
{0xB3, 0xB3, 0xB3},
|
|
};
|
|
u8 (*driving)[3], drive_sel;
|
|
|
|
if (voltage == OUTPUT_3V3) {
|
|
driving = driving_3v3;
|
|
drive_sel = pcr->sd30_drive_sel_3v3;
|
|
} else {
|
|
driving = driving_1v8;
|
|
drive_sel = pcr->sd30_drive_sel_1v8;
|
|
}
|
|
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CLK_DRIVE_SEL,
|
|
0xFF, driving[drive_sel][0]);
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CMD_DRIVE_SEL,
|
|
0xFF, driving[drive_sel][1]);
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DAT_DRIVE_SEL,
|
|
0xFF, driving[drive_sel][2]);
|
|
}
|
|
|
|
static void rts5227_fetch_vendor_settings(struct rtsx_pcr *pcr)
|
|
{
|
|
struct pci_dev *pdev = pcr->pci;
|
|
u32 reg;
|
|
|
|
pci_read_config_dword(pdev, PCR_SETTING_REG1, ®);
|
|
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
|
|
|
|
if (!rtsx_vendor_setting_valid(reg))
|
|
return;
|
|
|
|
pcr->aspm_en = rtsx_reg_to_aspm(reg);
|
|
pcr->sd30_drive_sel_1v8 = rtsx_reg_to_sd30_drive_sel_1v8(reg);
|
|
pcr->card_drive_sel &= 0x3F;
|
|
pcr->card_drive_sel |= rtsx_reg_to_card_drive_sel(reg);
|
|
|
|
pci_read_config_dword(pdev, PCR_SETTING_REG2, ®);
|
|
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
|
|
if (rtsx_check_mmc_support(reg))
|
|
pcr->extra_caps |= EXTRA_CAPS_NO_MMC;
|
|
pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg);
|
|
if (rtsx_reg_check_reverse_socket(reg))
|
|
pcr->flags |= PCR_REVERSE_SOCKET;
|
|
}
|
|
|
|
static void rts5227_init_from_cfg(struct rtsx_pcr *pcr)
|
|
{
|
|
struct pci_dev *pdev = pcr->pci;
|
|
int l1ss;
|
|
u32 lval;
|
|
struct rtsx_cr_option *option = &pcr->option;
|
|
|
|
l1ss = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS);
|
|
if (!l1ss)
|
|
return;
|
|
|
|
pci_read_config_dword(pdev, l1ss + PCI_L1SS_CTL1, &lval);
|
|
|
|
if (CHK_PCI_PID(pcr, 0x522A)) {
|
|
if (0 == (lval & 0x0F))
|
|
rtsx_pci_enable_oobs_polling(pcr);
|
|
else
|
|
rtsx_pci_disable_oobs_polling(pcr);
|
|
}
|
|
|
|
if (lval & PCI_L1SS_CTL1_ASPM_L1_1)
|
|
rtsx_set_dev_flag(pcr, ASPM_L1_1_EN);
|
|
else
|
|
rtsx_clear_dev_flag(pcr, ASPM_L1_1_EN);
|
|
|
|
if (lval & PCI_L1SS_CTL1_ASPM_L1_2)
|
|
rtsx_set_dev_flag(pcr, ASPM_L1_2_EN);
|
|
else
|
|
rtsx_clear_dev_flag(pcr, ASPM_L1_2_EN);
|
|
|
|
if (lval & PCI_L1SS_CTL1_PCIPM_L1_1)
|
|
rtsx_set_dev_flag(pcr, PM_L1_1_EN);
|
|
else
|
|
rtsx_clear_dev_flag(pcr, PM_L1_1_EN);
|
|
|
|
if (lval & PCI_L1SS_CTL1_PCIPM_L1_2)
|
|
rtsx_set_dev_flag(pcr, PM_L1_2_EN);
|
|
else
|
|
rtsx_clear_dev_flag(pcr, PM_L1_2_EN);
|
|
|
|
if (option->ltr_en) {
|
|
u16 val;
|
|
|
|
pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &val);
|
|
if (val & PCI_EXP_DEVCTL2_LTR_EN) {
|
|
option->ltr_enabled = true;
|
|
option->ltr_active = true;
|
|
rtsx_set_ltr_latency(pcr, option->ltr_active_latency);
|
|
} else {
|
|
option->ltr_enabled = false;
|
|
}
|
|
}
|
|
|
|
if (rtsx_check_dev_flag(pcr, ASPM_L1_1_EN | ASPM_L1_2_EN
|
|
| PM_L1_1_EN | PM_L1_2_EN))
|
|
option->force_clkreq_0 = false;
|
|
else
|
|
option->force_clkreq_0 = true;
|
|
|
|
}
|
|
|
|
static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
|
|
{
|
|
u16 cap;
|
|
struct rtsx_cr_option *option = &pcr->option;
|
|
|
|
rts5227_init_from_cfg(pcr);
|
|
rtsx_pci_init_cmd(pcr);
|
|
|
|
/* Configure GPIO as output */
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
|
|
/* Reset ASPM state to default value */
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
|
|
/* Switch LDO3318 source from DV33 to card_3v3 */
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
|
|
/* LED shine disabled, set initial shine cycle period */
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OLT_LED_CTL, 0x0F, 0x02);
|
|
/* Configure LTR */
|
|
pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &cap);
|
|
if (cap & PCI_EXP_DEVCTL2_LTR_EN)
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LTR_CTL, 0xFF, 0xA3);
|
|
/* Configure OBFF */
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OBFF_CFG, 0x03, 0x03);
|
|
/* Configure driving */
|
|
rts5227_fill_driving(pcr, OUTPUT_3V3);
|
|
/* Configure force_clock_req */
|
|
if (pcr->flags & PCR_REVERSE_SOCKET)
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0x30, 0x30);
|
|
else
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0x30, 0x00);
|
|
|
|
if (option->force_clkreq_0)
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG,
|
|
FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_LOW);
|
|
else
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG,
|
|
FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_HIGH);
|
|
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, pcr->reg_pm_ctrl3, 0x10, 0x00);
|
|
|
|
return rtsx_pci_send_cmd(pcr, 100);
|
|
}
|
|
|
|
static int rts5227_optimize_phy(struct rtsx_pcr *pcr)
|
|
{
|
|
int err;
|
|
|
|
err = rtsx_pci_write_register(pcr, PM_CTRL3, D3_DELINK_MODE_EN, 0x00);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Optimize RX sensitivity */
|
|
return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42);
|
|
}
|
|
|
|
static int rts5227_turn_on_led(struct rtsx_pcr *pcr)
|
|
{
|
|
return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x02);
|
|
}
|
|
|
|
static int rts5227_turn_off_led(struct rtsx_pcr *pcr)
|
|
{
|
|
return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00);
|
|
}
|
|
|
|
static int rts5227_enable_auto_blink(struct rtsx_pcr *pcr)
|
|
{
|
|
return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x08);
|
|
}
|
|
|
|
static int rts5227_disable_auto_blink(struct rtsx_pcr *pcr)
|
|
{
|
|
return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x00);
|
|
}
|
|
|
|
static int rts5227_card_power_on(struct rtsx_pcr *pcr, int card)
|
|
{
|
|
int err;
|
|
|
|
if (pcr->option.ocp_en)
|
|
rtsx_pci_enable_ocp(pcr);
|
|
|
|
rtsx_pci_init_cmd(pcr);
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
|
|
SD_POWER_MASK, SD_PARTIAL_POWER_ON);
|
|
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
|
|
LDO3318_PWR_MASK, 0x02);
|
|
|
|
err = rtsx_pci_send_cmd(pcr, 100);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* To avoid too large in-rush current */
|
|
msleep(20);
|
|
rtsx_pci_init_cmd(pcr);
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
|
|
SD_POWER_MASK, SD_POWER_ON);
|
|
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
|
|
LDO3318_PWR_MASK, 0x06);
|
|
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_OE,
|
|
SD_OUTPUT_EN, SD_OUTPUT_EN);
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_OE,
|
|
MS_OUTPUT_EN, MS_OUTPUT_EN);
|
|
return rtsx_pci_send_cmd(pcr, 100);
|
|
}
|
|
|
|
static int rts5227_card_power_off(struct rtsx_pcr *pcr, int card)
|
|
{
|
|
if (pcr->option.ocp_en)
|
|
rtsx_pci_disable_ocp(pcr);
|
|
|
|
rtsx_pci_write_register(pcr, CARD_PWR_CTL, SD_POWER_MASK |
|
|
PMOS_STRG_MASK, SD_POWER_OFF | PMOS_STRG_400mA);
|
|
rtsx_pci_write_register(pcr, PWR_GATE_CTRL, LDO3318_PWR_MASK, 0X00);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rts5227_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
|
|
{
|
|
int err;
|
|
|
|
if (voltage == OUTPUT_3V3) {
|
|
err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
|
|
if (err < 0)
|
|
return err;
|
|
} else if (voltage == OUTPUT_1V8) {
|
|
err = rtsx_pci_write_phy_register(pcr, 0x11, 0x3C02);
|
|
if (err < 0)
|
|
return err;
|
|
err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C80 | 0x24);
|
|
if (err < 0)
|
|
return err;
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* set pad drive */
|
|
rtsx_pci_init_cmd(pcr);
|
|
rts5227_fill_driving(pcr, voltage);
|
|
return rtsx_pci_send_cmd(pcr, 100);
|
|
}
|
|
|
|
static const struct pcr_ops rts5227_pcr_ops = {
|
|
.fetch_vendor_settings = rts5227_fetch_vendor_settings,
|
|
.extra_init_hw = rts5227_extra_init_hw,
|
|
.optimize_phy = rts5227_optimize_phy,
|
|
.turn_on_led = rts5227_turn_on_led,
|
|
.turn_off_led = rts5227_turn_off_led,
|
|
.enable_auto_blink = rts5227_enable_auto_blink,
|
|
.disable_auto_blink = rts5227_disable_auto_blink,
|
|
.card_power_on = rts5227_card_power_on,
|
|
.card_power_off = rts5227_card_power_off,
|
|
.switch_output_voltage = rts5227_switch_output_voltage,
|
|
.cd_deglitch = NULL,
|
|
.conv_clk_and_div_n = NULL,
|
|
};
|
|
|
|
/* SD Pull Control Enable:
|
|
* SD_DAT[3:0] ==> pull up
|
|
* SD_CD ==> pull up
|
|
* SD_WP ==> pull up
|
|
* SD_CMD ==> pull up
|
|
* SD_CLK ==> pull down
|
|
*/
|
|
static const u32 rts5227_sd_pull_ctl_enable_tbl[] = {
|
|
RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
|
|
RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9),
|
|
0,
|
|
};
|
|
|
|
/* SD Pull Control Disable:
|
|
* SD_DAT[3:0] ==> pull down
|
|
* SD_CD ==> pull up
|
|
* SD_WP ==> pull down
|
|
* SD_CMD ==> pull down
|
|
* SD_CLK ==> pull down
|
|
*/
|
|
static const u32 rts5227_sd_pull_ctl_disable_tbl[] = {
|
|
RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
|
|
RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5),
|
|
0,
|
|
};
|
|
|
|
/* MS Pull Control Enable:
|
|
* MS CD ==> pull up
|
|
* others ==> pull down
|
|
*/
|
|
static const u32 rts5227_ms_pull_ctl_enable_tbl[] = {
|
|
RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
|
|
RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
|
|
0,
|
|
};
|
|
|
|
/* MS Pull Control Disable:
|
|
* MS CD ==> pull up
|
|
* others ==> pull down
|
|
*/
|
|
static const u32 rts5227_ms_pull_ctl_disable_tbl[] = {
|
|
RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
|
|
RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
|
|
0,
|
|
};
|
|
|
|
void rts5227_init_params(struct rtsx_pcr *pcr)
|
|
{
|
|
pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
|
|
pcr->num_slots = 2;
|
|
pcr->ops = &rts5227_pcr_ops;
|
|
|
|
pcr->flags = 0;
|
|
pcr->card_drive_sel = RTSX_CARD_DRIVE_DEFAULT;
|
|
pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_B;
|
|
pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B;
|
|
pcr->aspm_en = ASPM_L1_EN;
|
|
pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 15);
|
|
pcr->rx_initial_phase = SET_CLOCK_PHASE(30, 7, 7);
|
|
|
|
pcr->ic_version = rts5227_get_ic_version(pcr);
|
|
pcr->sd_pull_ctl_enable_tbl = rts5227_sd_pull_ctl_enable_tbl;
|
|
pcr->sd_pull_ctl_disable_tbl = rts5227_sd_pull_ctl_disable_tbl;
|
|
pcr->ms_pull_ctl_enable_tbl = rts5227_ms_pull_ctl_enable_tbl;
|
|
pcr->ms_pull_ctl_disable_tbl = rts5227_ms_pull_ctl_disable_tbl;
|
|
|
|
pcr->reg_pm_ctrl3 = PM_CTRL3;
|
|
}
|
|
|
|
static int rts522a_optimize_phy(struct rtsx_pcr *pcr)
|
|
{
|
|
int err;
|
|
|
|
err = rtsx_pci_write_register(pcr, RTS522A_PM_CTRL3, D3_DELINK_MODE_EN,
|
|
0x00);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (is_version(pcr, 0x522A, IC_VER_A)) {
|
|
err = rtsx_pci_write_phy_register(pcr, PHY_RCR2,
|
|
PHY_RCR2_INIT_27S);
|
|
if (err)
|
|
return err;
|
|
|
|
rtsx_pci_write_phy_register(pcr, PHY_RCR1, PHY_RCR1_INIT_27S);
|
|
rtsx_pci_write_phy_register(pcr, PHY_FLD0, PHY_FLD0_INIT_27S);
|
|
rtsx_pci_write_phy_register(pcr, PHY_FLD3, PHY_FLD3_INIT_27S);
|
|
rtsx_pci_write_phy_register(pcr, PHY_FLD4, PHY_FLD4_INIT_27S);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rts522a_extra_init_hw(struct rtsx_pcr *pcr)
|
|
{
|
|
rts5227_extra_init_hw(pcr);
|
|
|
|
/* Power down OCP for power consumption */
|
|
if (!pcr->card_exist)
|
|
rtsx_pci_write_register(pcr, FPDCTL, OC_POWER_DOWN,
|
|
OC_POWER_DOWN);
|
|
|
|
rtsx_pci_write_register(pcr, FUNC_FORCE_CTL, FUNC_FORCE_UPME_XMT_DBG,
|
|
FUNC_FORCE_UPME_XMT_DBG);
|
|
rtsx_pci_write_register(pcr, PCLK_CTL, 0x04, 0x04);
|
|
rtsx_pci_write_register(pcr, PM_EVENT_DEBUG, PME_DEBUG_0, PME_DEBUG_0);
|
|
rtsx_pci_write_register(pcr, PM_CLK_FORCE_CTL, 0xFF, 0x11);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rts522a_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
|
|
{
|
|
int err;
|
|
|
|
if (voltage == OUTPUT_3V3) {
|
|
err = rtsx_pci_write_phy_register(pcr, 0x08, 0x57E4);
|
|
if (err < 0)
|
|
return err;
|
|
} else if (voltage == OUTPUT_1V8) {
|
|
err = rtsx_pci_write_phy_register(pcr, 0x11, 0x3C02);
|
|
if (err < 0)
|
|
return err;
|
|
err = rtsx_pci_write_phy_register(pcr, 0x08, 0x54A4);
|
|
if (err < 0)
|
|
return err;
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* set pad drive */
|
|
rtsx_pci_init_cmd(pcr);
|
|
rts5227_fill_driving(pcr, voltage);
|
|
return rtsx_pci_send_cmd(pcr, 100);
|
|
}
|
|
|
|
static void rts522a_set_l1off_cfg_sub_d0(struct rtsx_pcr *pcr, int active)
|
|
{
|
|
struct rtsx_cr_option *option = &pcr->option;
|
|
int aspm_L1_1, aspm_L1_2;
|
|
u8 val = 0;
|
|
|
|
aspm_L1_1 = rtsx_check_dev_flag(pcr, ASPM_L1_1_EN);
|
|
aspm_L1_2 = rtsx_check_dev_flag(pcr, ASPM_L1_2_EN);
|
|
|
|
if (active) {
|
|
/* run, latency: 60us */
|
|
if (aspm_L1_1)
|
|
val = option->ltr_l1off_snooze_sspwrgate;
|
|
} else {
|
|
/* l1off, latency: 300us */
|
|
if (aspm_L1_2)
|
|
val = option->ltr_l1off_sspwrgate;
|
|
}
|
|
|
|
rtsx_set_l1off_sub(pcr, val);
|
|
}
|
|
|
|
/* rts522a operations mainly derived from rts5227, except phy/hw init setting.
|
|
*/
|
|
static const struct pcr_ops rts522a_pcr_ops = {
|
|
.fetch_vendor_settings = rts5227_fetch_vendor_settings,
|
|
.extra_init_hw = rts522a_extra_init_hw,
|
|
.optimize_phy = rts522a_optimize_phy,
|
|
.turn_on_led = rts5227_turn_on_led,
|
|
.turn_off_led = rts5227_turn_off_led,
|
|
.enable_auto_blink = rts5227_enable_auto_blink,
|
|
.disable_auto_blink = rts5227_disable_auto_blink,
|
|
.card_power_on = rts5227_card_power_on,
|
|
.card_power_off = rts5227_card_power_off,
|
|
.switch_output_voltage = rts522a_switch_output_voltage,
|
|
.cd_deglitch = NULL,
|
|
.conv_clk_and_div_n = NULL,
|
|
.set_l1off_cfg_sub_d0 = rts522a_set_l1off_cfg_sub_d0,
|
|
};
|
|
|
|
void rts522a_init_params(struct rtsx_pcr *pcr)
|
|
{
|
|
struct rtsx_cr_option *option = &pcr->option;
|
|
|
|
rts5227_init_params(pcr);
|
|
pcr->ops = &rts522a_pcr_ops;
|
|
pcr->tx_initial_phase = SET_CLOCK_PHASE(20, 20, 11);
|
|
pcr->reg_pm_ctrl3 = RTS522A_PM_CTRL3;
|
|
|
|
option->dev_flags = LTR_L1SS_PWR_GATE_EN;
|
|
option->ltr_en = true;
|
|
|
|
/* init latency of active, idle, L1OFF to 60us, 300us, 3ms */
|
|
option->ltr_active_latency = LTR_ACTIVE_LATENCY_DEF;
|
|
option->ltr_idle_latency = LTR_IDLE_LATENCY_DEF;
|
|
option->ltr_l1off_latency = LTR_L1OFF_LATENCY_DEF;
|
|
option->l1_snooze_delay = L1_SNOOZE_DELAY_DEF;
|
|
option->ltr_l1off_sspwrgate = 0x7F;
|
|
option->ltr_l1off_snooze_sspwrgate = 0x78;
|
|
|
|
pcr->option.ocp_en = 1;
|
|
if (pcr->option.ocp_en)
|
|
pcr->hw_param.interrupt_en |= SD_OC_INT_EN;
|
|
pcr->hw_param.ocp_glitch = SD_OCP_GLITCH_10M;
|
|
pcr->option.sd_800mA_ocp_thd = RTS522A_OCP_THD_800;
|
|
|
|
}
|