622 строки
15 KiB
C
622 строки
15 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/* Copyright (C) 2019 ASPEED Technology Inc. */
|
|
/* Copyright (C) 2019 IBM Corp. */
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/math64.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include "sdhci-pltfm.h"
|
|
|
|
#define ASPEED_SDC_INFO 0x00
|
|
#define ASPEED_SDC_S1_MMC8 BIT(25)
|
|
#define ASPEED_SDC_S0_MMC8 BIT(24)
|
|
#define ASPEED_SDC_PHASE 0xf4
|
|
#define ASPEED_SDC_S1_PHASE_IN GENMASK(25, 21)
|
|
#define ASPEED_SDC_S0_PHASE_IN GENMASK(20, 16)
|
|
#define ASPEED_SDC_S1_PHASE_OUT GENMASK(15, 11)
|
|
#define ASPEED_SDC_S1_PHASE_IN_EN BIT(10)
|
|
#define ASPEED_SDC_S1_PHASE_OUT_EN GENMASK(9, 8)
|
|
#define ASPEED_SDC_S0_PHASE_OUT GENMASK(7, 3)
|
|
#define ASPEED_SDC_S0_PHASE_IN_EN BIT(2)
|
|
#define ASPEED_SDC_S0_PHASE_OUT_EN GENMASK(1, 0)
|
|
#define ASPEED_SDC_PHASE_MAX 31
|
|
|
|
struct aspeed_sdc {
|
|
struct clk *clk;
|
|
struct resource *res;
|
|
|
|
spinlock_t lock;
|
|
void __iomem *regs;
|
|
};
|
|
|
|
struct aspeed_sdhci_tap_param {
|
|
bool valid;
|
|
|
|
#define ASPEED_SDHCI_TAP_PARAM_INVERT_CLK BIT(4)
|
|
u8 in;
|
|
u8 out;
|
|
};
|
|
|
|
struct aspeed_sdhci_tap_desc {
|
|
u32 tap_mask;
|
|
u32 enable_mask;
|
|
u8 enable_value;
|
|
};
|
|
|
|
struct aspeed_sdhci_phase_desc {
|
|
struct aspeed_sdhci_tap_desc in;
|
|
struct aspeed_sdhci_tap_desc out;
|
|
};
|
|
|
|
struct aspeed_sdhci_pdata {
|
|
unsigned int clk_div_start;
|
|
const struct aspeed_sdhci_phase_desc *phase_desc;
|
|
size_t nr_phase_descs;
|
|
};
|
|
|
|
struct aspeed_sdhci {
|
|
const struct aspeed_sdhci_pdata *pdata;
|
|
struct aspeed_sdc *parent;
|
|
u32 width_mask;
|
|
struct mmc_clk_phase_map phase_map;
|
|
const struct aspeed_sdhci_phase_desc *phase_desc;
|
|
};
|
|
|
|
static void aspeed_sdc_configure_8bit_mode(struct aspeed_sdc *sdc,
|
|
struct aspeed_sdhci *sdhci,
|
|
bool bus8)
|
|
{
|
|
u32 info;
|
|
|
|
/* Set/clear 8 bit mode */
|
|
spin_lock(&sdc->lock);
|
|
info = readl(sdc->regs + ASPEED_SDC_INFO);
|
|
if (bus8)
|
|
info |= sdhci->width_mask;
|
|
else
|
|
info &= ~sdhci->width_mask;
|
|
writel(info, sdc->regs + ASPEED_SDC_INFO);
|
|
spin_unlock(&sdc->lock);
|
|
}
|
|
|
|
static u32
|
|
aspeed_sdc_set_phase_tap(const struct aspeed_sdhci_tap_desc *desc,
|
|
u8 tap, bool enable, u32 reg)
|
|
{
|
|
reg &= ~(desc->enable_mask | desc->tap_mask);
|
|
if (enable) {
|
|
reg |= tap << __ffs(desc->tap_mask);
|
|
reg |= desc->enable_value << __ffs(desc->enable_mask);
|
|
}
|
|
|
|
return reg;
|
|
}
|
|
|
|
static void
|
|
aspeed_sdc_set_phase_taps(struct aspeed_sdc *sdc,
|
|
const struct aspeed_sdhci_phase_desc *desc,
|
|
const struct aspeed_sdhci_tap_param *taps)
|
|
{
|
|
u32 reg;
|
|
|
|
spin_lock(&sdc->lock);
|
|
reg = readl(sdc->regs + ASPEED_SDC_PHASE);
|
|
|
|
reg = aspeed_sdc_set_phase_tap(&desc->in, taps->in, taps->valid, reg);
|
|
reg = aspeed_sdc_set_phase_tap(&desc->out, taps->out, taps->valid, reg);
|
|
|
|
writel(reg, sdc->regs + ASPEED_SDC_PHASE);
|
|
spin_unlock(&sdc->lock);
|
|
}
|
|
|
|
#define PICOSECONDS_PER_SECOND 1000000000000ULL
|
|
#define ASPEED_SDHCI_NR_TAPS 15
|
|
/* Measured value with *handwave* environmentals and static loading */
|
|
#define ASPEED_SDHCI_MAX_TAP_DELAY_PS 1253
|
|
static int aspeed_sdhci_phase_to_tap(struct device *dev, unsigned long rate_hz,
|
|
int phase_deg)
|
|
{
|
|
u64 phase_period_ps;
|
|
u64 prop_delay_ps;
|
|
u64 clk_period_ps;
|
|
unsigned int tap;
|
|
u8 inverted;
|
|
|
|
phase_deg %= 360;
|
|
|
|
if (phase_deg >= 180) {
|
|
inverted = ASPEED_SDHCI_TAP_PARAM_INVERT_CLK;
|
|
phase_deg -= 180;
|
|
dev_dbg(dev,
|
|
"Inverting clock to reduce phase correction from %d to %d degrees\n",
|
|
phase_deg + 180, phase_deg);
|
|
} else {
|
|
inverted = 0;
|
|
}
|
|
|
|
prop_delay_ps = ASPEED_SDHCI_MAX_TAP_DELAY_PS / ASPEED_SDHCI_NR_TAPS;
|
|
clk_period_ps = div_u64(PICOSECONDS_PER_SECOND, (u64)rate_hz);
|
|
phase_period_ps = div_u64((u64)phase_deg * clk_period_ps, 360ULL);
|
|
|
|
tap = div_u64(phase_period_ps, prop_delay_ps);
|
|
if (tap > ASPEED_SDHCI_NR_TAPS) {
|
|
dev_warn(dev,
|
|
"Requested out of range phase tap %d for %d degrees of phase compensation at %luHz, clamping to tap %d\n",
|
|
tap, phase_deg, rate_hz, ASPEED_SDHCI_NR_TAPS);
|
|
tap = ASPEED_SDHCI_NR_TAPS;
|
|
}
|
|
|
|
return inverted | tap;
|
|
}
|
|
|
|
static void
|
|
aspeed_sdhci_phases_to_taps(struct device *dev, unsigned long rate,
|
|
const struct mmc_clk_phase *phases,
|
|
struct aspeed_sdhci_tap_param *taps)
|
|
{
|
|
taps->valid = phases->valid;
|
|
|
|
if (!phases->valid)
|
|
return;
|
|
|
|
taps->in = aspeed_sdhci_phase_to_tap(dev, rate, phases->in_deg);
|
|
taps->out = aspeed_sdhci_phase_to_tap(dev, rate, phases->out_deg);
|
|
}
|
|
|
|
static void
|
|
aspeed_sdhci_configure_phase(struct sdhci_host *host, unsigned long rate)
|
|
{
|
|
struct aspeed_sdhci_tap_param _taps = {0}, *taps = &_taps;
|
|
struct mmc_clk_phase *params;
|
|
struct aspeed_sdhci *sdhci;
|
|
struct device *dev;
|
|
|
|
dev = mmc_dev(host->mmc);
|
|
sdhci = sdhci_pltfm_priv(sdhci_priv(host));
|
|
|
|
if (!sdhci->phase_desc)
|
|
return;
|
|
|
|
params = &sdhci->phase_map.phase[host->timing];
|
|
aspeed_sdhci_phases_to_taps(dev, rate, params, taps);
|
|
aspeed_sdc_set_phase_taps(sdhci->parent, sdhci->phase_desc, taps);
|
|
dev_dbg(dev,
|
|
"Using taps [%d, %d] for [%d, %d] degrees of phase correction at %luHz (%d)\n",
|
|
taps->in & ASPEED_SDHCI_NR_TAPS,
|
|
taps->out & ASPEED_SDHCI_NR_TAPS,
|
|
params->in_deg, params->out_deg, rate, host->timing);
|
|
}
|
|
|
|
static void aspeed_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
unsigned long parent, bus;
|
|
struct aspeed_sdhci *sdhci;
|
|
int div;
|
|
u16 clk;
|
|
|
|
pltfm_host = sdhci_priv(host);
|
|
sdhci = sdhci_pltfm_priv(pltfm_host);
|
|
|
|
parent = clk_get_rate(pltfm_host->clk);
|
|
|
|
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
|
|
|
|
if (clock == 0)
|
|
return;
|
|
|
|
if (WARN_ON(clock > host->max_clk))
|
|
clock = host->max_clk;
|
|
|
|
/*
|
|
* Regarding the AST2600:
|
|
*
|
|
* If (EMMC12C[7:6], EMMC12C[15:8] == 0) then
|
|
* period of SDCLK = period of SDMCLK.
|
|
*
|
|
* If (EMMC12C[7:6], EMMC12C[15:8] != 0) then
|
|
* period of SDCLK = period of SDMCLK * 2 * (EMMC12C[7:6], EMMC[15:8])
|
|
*
|
|
* If you keep EMMC12C[7:6] = 0 and EMMC12C[15:8] as one-hot,
|
|
* 0x1/0x2/0x4/etc, you will find it is compatible to AST2400 or AST2500
|
|
*
|
|
* Keep the one-hot behaviour for backwards compatibility except for
|
|
* supporting the value 0 in (EMMC12C[7:6], EMMC12C[15:8]), and capture
|
|
* the 0-value capability in clk_div_start.
|
|
*/
|
|
for (div = sdhci->pdata->clk_div_start; div < 256; div *= 2) {
|
|
bus = parent / div;
|
|
if (bus <= clock)
|
|
break;
|
|
}
|
|
|
|
div >>= 1;
|
|
|
|
clk = div << SDHCI_DIVIDER_SHIFT;
|
|
|
|
aspeed_sdhci_configure_phase(host, bus);
|
|
|
|
sdhci_enable_clk(host, clk);
|
|
}
|
|
|
|
static unsigned int aspeed_sdhci_get_max_clock(struct sdhci_host *host)
|
|
{
|
|
if (host->mmc->f_max)
|
|
return host->mmc->f_max;
|
|
|
|
return sdhci_pltfm_clk_get_max_clock(host);
|
|
}
|
|
|
|
static void aspeed_sdhci_set_bus_width(struct sdhci_host *host, int width)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_priv;
|
|
struct aspeed_sdhci *aspeed_sdhci;
|
|
struct aspeed_sdc *aspeed_sdc;
|
|
u8 ctrl;
|
|
|
|
pltfm_priv = sdhci_priv(host);
|
|
aspeed_sdhci = sdhci_pltfm_priv(pltfm_priv);
|
|
aspeed_sdc = aspeed_sdhci->parent;
|
|
|
|
/* Set/clear 8-bit mode */
|
|
aspeed_sdc_configure_8bit_mode(aspeed_sdc, aspeed_sdhci,
|
|
width == MMC_BUS_WIDTH_8);
|
|
|
|
/* Set/clear 1 or 4 bit mode */
|
|
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
|
|
if (width == MMC_BUS_WIDTH_4)
|
|
ctrl |= SDHCI_CTRL_4BITBUS;
|
|
else
|
|
ctrl &= ~SDHCI_CTRL_4BITBUS;
|
|
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
|
|
}
|
|
|
|
static u32 aspeed_sdhci_readl(struct sdhci_host *host, int reg)
|
|
{
|
|
u32 val = readl(host->ioaddr + reg);
|
|
|
|
if (unlikely(reg == SDHCI_PRESENT_STATE) &&
|
|
(host->mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH))
|
|
val ^= SDHCI_CARD_PRESENT;
|
|
|
|
return val;
|
|
}
|
|
|
|
static const struct sdhci_ops aspeed_sdhci_ops = {
|
|
.read_l = aspeed_sdhci_readl,
|
|
.set_clock = aspeed_sdhci_set_clock,
|
|
.get_max_clock = aspeed_sdhci_get_max_clock,
|
|
.set_bus_width = aspeed_sdhci_set_bus_width,
|
|
.get_timeout_clock = sdhci_pltfm_clk_get_max_clock,
|
|
.reset = sdhci_reset,
|
|
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
};
|
|
|
|
static const struct sdhci_pltfm_data aspeed_sdhci_pdata = {
|
|
.ops = &aspeed_sdhci_ops,
|
|
.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
|
|
};
|
|
|
|
static inline int aspeed_sdhci_calculate_slot(struct aspeed_sdhci *dev,
|
|
struct resource *res)
|
|
{
|
|
resource_size_t delta;
|
|
|
|
if (!res || resource_type(res) != IORESOURCE_MEM)
|
|
return -EINVAL;
|
|
|
|
if (res->start < dev->parent->res->start)
|
|
return -EINVAL;
|
|
|
|
delta = res->start - dev->parent->res->start;
|
|
if (delta & (0x100 - 1))
|
|
return -EINVAL;
|
|
|
|
return (delta / 0x100) - 1;
|
|
}
|
|
|
|
static int aspeed_sdhci_probe(struct platform_device *pdev)
|
|
{
|
|
const struct aspeed_sdhci_pdata *aspeed_pdata;
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
struct aspeed_sdhci *dev;
|
|
struct sdhci_host *host;
|
|
struct resource *res;
|
|
int slot;
|
|
int ret;
|
|
|
|
aspeed_pdata = of_device_get_match_data(&pdev->dev);
|
|
if (!aspeed_pdata) {
|
|
dev_err(&pdev->dev, "Missing platform configuration data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
host = sdhci_pltfm_init(pdev, &aspeed_sdhci_pdata, sizeof(*dev));
|
|
if (IS_ERR(host))
|
|
return PTR_ERR(host);
|
|
|
|
pltfm_host = sdhci_priv(host);
|
|
dev = sdhci_pltfm_priv(pltfm_host);
|
|
dev->pdata = aspeed_pdata;
|
|
dev->parent = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
slot = aspeed_sdhci_calculate_slot(dev, res);
|
|
|
|
if (slot < 0)
|
|
return slot;
|
|
else if (slot >= 2)
|
|
return -EINVAL;
|
|
|
|
if (slot < dev->pdata->nr_phase_descs) {
|
|
dev->phase_desc = &dev->pdata->phase_desc[slot];
|
|
} else {
|
|
dev_info(&pdev->dev,
|
|
"Phase control not supported for slot %d\n", slot);
|
|
dev->phase_desc = NULL;
|
|
}
|
|
|
|
dev->width_mask = !slot ? ASPEED_SDC_S0_MMC8 : ASPEED_SDC_S1_MMC8;
|
|
|
|
dev_info(&pdev->dev, "Configured for slot %d\n", slot);
|
|
|
|
sdhci_get_of_property(pdev);
|
|
|
|
pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(pltfm_host->clk))
|
|
return PTR_ERR(pltfm_host->clk);
|
|
|
|
ret = clk_prepare_enable(pltfm_host->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Unable to enable SDIO clock\n");
|
|
goto err_pltfm_free;
|
|
}
|
|
|
|
ret = mmc_of_parse(host->mmc);
|
|
if (ret)
|
|
goto err_sdhci_add;
|
|
|
|
if (dev->phase_desc)
|
|
mmc_of_parse_clk_phase(host->mmc, &dev->phase_map);
|
|
|
|
ret = sdhci_add_host(host);
|
|
if (ret)
|
|
goto err_sdhci_add;
|
|
|
|
return 0;
|
|
|
|
err_sdhci_add:
|
|
clk_disable_unprepare(pltfm_host->clk);
|
|
err_pltfm_free:
|
|
sdhci_pltfm_free(pdev);
|
|
return ret;
|
|
}
|
|
|
|
static int aspeed_sdhci_remove(struct platform_device *pdev)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
struct sdhci_host *host;
|
|
int dead = 0;
|
|
|
|
host = platform_get_drvdata(pdev);
|
|
pltfm_host = sdhci_priv(host);
|
|
|
|
sdhci_remove_host(host, dead);
|
|
|
|
clk_disable_unprepare(pltfm_host->clk);
|
|
|
|
sdhci_pltfm_free(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct aspeed_sdhci_pdata ast2400_sdhci_pdata = {
|
|
.clk_div_start = 2,
|
|
};
|
|
|
|
static const struct aspeed_sdhci_phase_desc ast2600_sdhci_phase[] = {
|
|
/* SDHCI/Slot 0 */
|
|
[0] = {
|
|
.in = {
|
|
.tap_mask = ASPEED_SDC_S0_PHASE_IN,
|
|
.enable_mask = ASPEED_SDC_S0_PHASE_IN_EN,
|
|
.enable_value = 1,
|
|
},
|
|
.out = {
|
|
.tap_mask = ASPEED_SDC_S0_PHASE_OUT,
|
|
.enable_mask = ASPEED_SDC_S0_PHASE_OUT_EN,
|
|
.enable_value = 3,
|
|
},
|
|
},
|
|
/* SDHCI/Slot 1 */
|
|
[1] = {
|
|
.in = {
|
|
.tap_mask = ASPEED_SDC_S1_PHASE_IN,
|
|
.enable_mask = ASPEED_SDC_S1_PHASE_IN_EN,
|
|
.enable_value = 1,
|
|
},
|
|
.out = {
|
|
.tap_mask = ASPEED_SDC_S1_PHASE_OUT,
|
|
.enable_mask = ASPEED_SDC_S1_PHASE_OUT_EN,
|
|
.enable_value = 3,
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct aspeed_sdhci_pdata ast2600_sdhci_pdata = {
|
|
.clk_div_start = 1,
|
|
.phase_desc = ast2600_sdhci_phase,
|
|
.nr_phase_descs = ARRAY_SIZE(ast2600_sdhci_phase),
|
|
};
|
|
|
|
static const struct of_device_id aspeed_sdhci_of_match[] = {
|
|
{ .compatible = "aspeed,ast2400-sdhci", .data = &ast2400_sdhci_pdata, },
|
|
{ .compatible = "aspeed,ast2500-sdhci", .data = &ast2400_sdhci_pdata, },
|
|
{ .compatible = "aspeed,ast2600-sdhci", .data = &ast2600_sdhci_pdata, },
|
|
{ }
|
|
};
|
|
|
|
static struct platform_driver aspeed_sdhci_driver = {
|
|
.driver = {
|
|
.name = "sdhci-aspeed",
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
.of_match_table = aspeed_sdhci_of_match,
|
|
},
|
|
.probe = aspeed_sdhci_probe,
|
|
.remove = aspeed_sdhci_remove,
|
|
};
|
|
|
|
static int aspeed_sdc_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
struct device_node *parent, *child;
|
|
struct aspeed_sdc *sdc;
|
|
int ret;
|
|
|
|
sdc = devm_kzalloc(&pdev->dev, sizeof(*sdc), GFP_KERNEL);
|
|
if (!sdc)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&sdc->lock);
|
|
|
|
sdc->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(sdc->clk))
|
|
return PTR_ERR(sdc->clk);
|
|
|
|
ret = clk_prepare_enable(sdc->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Unable to enable SDCLK\n");
|
|
return ret;
|
|
}
|
|
|
|
sdc->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
sdc->regs = devm_ioremap_resource(&pdev->dev, sdc->res);
|
|
if (IS_ERR(sdc->regs)) {
|
|
ret = PTR_ERR(sdc->regs);
|
|
goto err_clk;
|
|
}
|
|
|
|
dev_set_drvdata(&pdev->dev, sdc);
|
|
|
|
parent = pdev->dev.of_node;
|
|
for_each_available_child_of_node(parent, child) {
|
|
struct platform_device *cpdev;
|
|
|
|
cpdev = of_platform_device_create(child, NULL, &pdev->dev);
|
|
if (!cpdev) {
|
|
of_node_put(child);
|
|
ret = -ENODEV;
|
|
goto err_clk;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_clk:
|
|
clk_disable_unprepare(sdc->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int aspeed_sdc_remove(struct platform_device *pdev)
|
|
{
|
|
struct aspeed_sdc *sdc = dev_get_drvdata(&pdev->dev);
|
|
|
|
clk_disable_unprepare(sdc->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id aspeed_sdc_of_match[] = {
|
|
{ .compatible = "aspeed,ast2400-sd-controller", },
|
|
{ .compatible = "aspeed,ast2500-sd-controller", },
|
|
{ .compatible = "aspeed,ast2600-sd-controller", },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, aspeed_sdc_of_match);
|
|
|
|
static struct platform_driver aspeed_sdc_driver = {
|
|
.driver = {
|
|
.name = "sd-controller-aspeed",
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
.pm = &sdhci_pltfm_pmops,
|
|
.of_match_table = aspeed_sdc_of_match,
|
|
},
|
|
.probe = aspeed_sdc_probe,
|
|
.remove = aspeed_sdc_remove,
|
|
};
|
|
|
|
#if defined(CONFIG_MMC_SDHCI_OF_ASPEED_TEST)
|
|
#include "sdhci-of-aspeed-test.c"
|
|
|
|
static inline int aspeed_sdc_tests_init(void)
|
|
{
|
|
return __kunit_test_suites_init(aspeed_sdc_test_suites);
|
|
}
|
|
|
|
static inline void aspeed_sdc_tests_exit(void)
|
|
{
|
|
__kunit_test_suites_exit(aspeed_sdc_test_suites);
|
|
}
|
|
#else
|
|
static inline int aspeed_sdc_tests_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void aspeed_sdc_tests_exit(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
static int __init aspeed_sdc_init(void)
|
|
{
|
|
int rc;
|
|
|
|
rc = platform_driver_register(&aspeed_sdhci_driver);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = platform_driver_register(&aspeed_sdc_driver);
|
|
if (rc < 0)
|
|
goto cleanup_sdhci;
|
|
|
|
rc = aspeed_sdc_tests_init();
|
|
if (rc < 0) {
|
|
platform_driver_unregister(&aspeed_sdc_driver);
|
|
goto cleanup_sdhci;
|
|
}
|
|
|
|
return 0;
|
|
|
|
cleanup_sdhci:
|
|
platform_driver_unregister(&aspeed_sdhci_driver);
|
|
|
|
return rc;
|
|
}
|
|
module_init(aspeed_sdc_init);
|
|
|
|
static void __exit aspeed_sdc_exit(void)
|
|
{
|
|
aspeed_sdc_tests_exit();
|
|
|
|
platform_driver_unregister(&aspeed_sdc_driver);
|
|
platform_driver_unregister(&aspeed_sdhci_driver);
|
|
}
|
|
module_exit(aspeed_sdc_exit);
|
|
|
|
MODULE_DESCRIPTION("Driver for the ASPEED SD/SDIO/SDHCI Controllers");
|
|
MODULE_AUTHOR("Ryan Chen <ryan_chen@aspeedtech.com>");
|
|
MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>");
|
|
MODULE_LICENSE("GPL");
|