513 строки
11 KiB
C
513 строки
11 KiB
C
/*
|
|
* sst25l.c
|
|
*
|
|
* Driver for SST25L SPI Flash chips
|
|
*
|
|
* Copyright © 2009 Bluewater Systems Ltd
|
|
* Author: Andre Renaud <andre@bluewatersys.com>
|
|
* Author: Ryan Mallon <ryan@bluewatersys.com>
|
|
*
|
|
* Based on m25p80.c
|
|
*
|
|
* This code is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/flash.h>
|
|
|
|
/* Erases can take up to 3 seconds! */
|
|
#define MAX_READY_WAIT_JIFFIES msecs_to_jiffies(3000)
|
|
|
|
#define SST25L_CMD_WRSR 0x01 /* Write status register */
|
|
#define SST25L_CMD_WRDI 0x04 /* Write disable */
|
|
#define SST25L_CMD_RDSR 0x05 /* Read status register */
|
|
#define SST25L_CMD_WREN 0x06 /* Write enable */
|
|
#define SST25L_CMD_READ 0x03 /* High speed read */
|
|
|
|
#define SST25L_CMD_EWSR 0x50 /* Enable write status register */
|
|
#define SST25L_CMD_SECTOR_ERASE 0x20 /* Erase sector */
|
|
#define SST25L_CMD_READ_ID 0x90 /* Read device ID */
|
|
#define SST25L_CMD_AAI_PROGRAM 0xaf /* Auto address increment */
|
|
|
|
#define SST25L_STATUS_BUSY (1 << 0) /* Chip is busy */
|
|
#define SST25L_STATUS_WREN (1 << 1) /* Write enabled */
|
|
#define SST25L_STATUS_BP0 (1 << 2) /* Block protection 0 */
|
|
#define SST25L_STATUS_BP1 (1 << 3) /* Block protection 1 */
|
|
|
|
struct sst25l_flash {
|
|
struct spi_device *spi;
|
|
struct mutex lock;
|
|
struct mtd_info mtd;
|
|
|
|
int partitioned;
|
|
};
|
|
|
|
struct flash_info {
|
|
const char *name;
|
|
uint16_t device_id;
|
|
unsigned page_size;
|
|
unsigned nr_pages;
|
|
unsigned erase_size;
|
|
};
|
|
|
|
#define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd)
|
|
|
|
static struct flash_info __initdata sst25l_flash_info[] = {
|
|
{"sst25lf020a", 0xbf43, 256, 1024, 4096},
|
|
{"sst25lf040a", 0xbf44, 256, 2048, 4096},
|
|
};
|
|
|
|
static int sst25l_status(struct sst25l_flash *flash, int *status)
|
|
{
|
|
struct spi_message m;
|
|
struct spi_transfer t;
|
|
unsigned char cmd_resp[2];
|
|
int err;
|
|
|
|
spi_message_init(&m);
|
|
memset(&t, 0, sizeof(struct spi_transfer));
|
|
|
|
cmd_resp[0] = SST25L_CMD_RDSR;
|
|
cmd_resp[1] = 0xff;
|
|
t.tx_buf = cmd_resp;
|
|
t.rx_buf = cmd_resp;
|
|
t.len = sizeof(cmd_resp);
|
|
spi_message_add_tail(&t, &m);
|
|
err = spi_sync(flash->spi, &m);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*status = cmd_resp[1];
|
|
return 0;
|
|
}
|
|
|
|
static int sst25l_write_enable(struct sst25l_flash *flash, int enable)
|
|
{
|
|
unsigned char command[2];
|
|
int status, err;
|
|
|
|
command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI;
|
|
err = spi_write(flash->spi, command, 1);
|
|
if (err)
|
|
return err;
|
|
|
|
command[0] = SST25L_CMD_EWSR;
|
|
err = spi_write(flash->spi, command, 1);
|
|
if (err)
|
|
return err;
|
|
|
|
command[0] = SST25L_CMD_WRSR;
|
|
command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1;
|
|
err = spi_write(flash->spi, command, 2);
|
|
if (err)
|
|
return err;
|
|
|
|
if (enable) {
|
|
err = sst25l_status(flash, &status);
|
|
if (err)
|
|
return err;
|
|
if (!(status & SST25L_STATUS_WREN))
|
|
return -EROFS;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sst25l_wait_till_ready(struct sst25l_flash *flash)
|
|
{
|
|
unsigned long deadline;
|
|
int status, err;
|
|
|
|
deadline = jiffies + MAX_READY_WAIT_JIFFIES;
|
|
do {
|
|
err = sst25l_status(flash, &status);
|
|
if (err)
|
|
return err;
|
|
if (!(status & SST25L_STATUS_BUSY))
|
|
return 0;
|
|
|
|
cond_resched();
|
|
} while (!time_after_eq(jiffies, deadline));
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset)
|
|
{
|
|
unsigned char command[4];
|
|
int err;
|
|
|
|
err = sst25l_write_enable(flash, 1);
|
|
if (err)
|
|
return err;
|
|
|
|
command[0] = SST25L_CMD_SECTOR_ERASE;
|
|
command[1] = offset >> 16;
|
|
command[2] = offset >> 8;
|
|
command[3] = offset;
|
|
err = spi_write(flash->spi, command, 4);
|
|
if (err)
|
|
return err;
|
|
|
|
err = sst25l_wait_till_ready(flash);
|
|
if (err)
|
|
return err;
|
|
|
|
return sst25l_write_enable(flash, 0);
|
|
}
|
|
|
|
static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr)
|
|
{
|
|
struct sst25l_flash *flash = to_sst25l_flash(mtd);
|
|
uint32_t addr, end;
|
|
int err;
|
|
|
|
/* Sanity checks */
|
|
if (instr->addr + instr->len > flash->mtd.size)
|
|
return -EINVAL;
|
|
|
|
if ((uint32_t)instr->len % mtd->erasesize)
|
|
return -EINVAL;
|
|
|
|
if ((uint32_t)instr->addr % mtd->erasesize)
|
|
return -EINVAL;
|
|
|
|
addr = instr->addr;
|
|
end = addr + instr->len;
|
|
|
|
mutex_lock(&flash->lock);
|
|
|
|
err = sst25l_wait_till_ready(flash);
|
|
if (err) {
|
|
mutex_unlock(&flash->lock);
|
|
return err;
|
|
}
|
|
|
|
while (addr < end) {
|
|
err = sst25l_erase_sector(flash, addr);
|
|
if (err) {
|
|
mutex_unlock(&flash->lock);
|
|
instr->state = MTD_ERASE_FAILED;
|
|
dev_err(&flash->spi->dev, "Erase failed\n");
|
|
return err;
|
|
}
|
|
|
|
addr += mtd->erasesize;
|
|
}
|
|
|
|
mutex_unlock(&flash->lock);
|
|
|
|
instr->state = MTD_ERASE_DONE;
|
|
mtd_erase_callback(instr);
|
|
return 0;
|
|
}
|
|
|
|
static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len,
|
|
size_t *retlen, unsigned char *buf)
|
|
{
|
|
struct sst25l_flash *flash = to_sst25l_flash(mtd);
|
|
struct spi_transfer transfer[2];
|
|
struct spi_message message;
|
|
unsigned char command[4];
|
|
int ret;
|
|
|
|
/* Sanity checking */
|
|
if (len == 0)
|
|
return 0;
|
|
|
|
if (from + len > flash->mtd.size)
|
|
return -EINVAL;
|
|
|
|
if (retlen)
|
|
*retlen = 0;
|
|
|
|
spi_message_init(&message);
|
|
memset(&transfer, 0, sizeof(transfer));
|
|
|
|
command[0] = SST25L_CMD_READ;
|
|
command[1] = from >> 16;
|
|
command[2] = from >> 8;
|
|
command[3] = from;
|
|
|
|
transfer[0].tx_buf = command;
|
|
transfer[0].len = sizeof(command);
|
|
spi_message_add_tail(&transfer[0], &message);
|
|
|
|
transfer[1].rx_buf = buf;
|
|
transfer[1].len = len;
|
|
spi_message_add_tail(&transfer[1], &message);
|
|
|
|
mutex_lock(&flash->lock);
|
|
|
|
/* Wait for previous write/erase to complete */
|
|
ret = sst25l_wait_till_ready(flash);
|
|
if (ret) {
|
|
mutex_unlock(&flash->lock);
|
|
return ret;
|
|
}
|
|
|
|
spi_sync(flash->spi, &message);
|
|
|
|
if (retlen && message.actual_length > sizeof(command))
|
|
*retlen += message.actual_length - sizeof(command);
|
|
|
|
mutex_unlock(&flash->lock);
|
|
return 0;
|
|
}
|
|
|
|
static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len,
|
|
size_t *retlen, const unsigned char *buf)
|
|
{
|
|
struct sst25l_flash *flash = to_sst25l_flash(mtd);
|
|
int i, j, ret, bytes, copied = 0;
|
|
unsigned char command[5];
|
|
|
|
/* Sanity checks */
|
|
if (!len)
|
|
return 0;
|
|
|
|
if (to + len > flash->mtd.size)
|
|
return -EINVAL;
|
|
|
|
if ((uint32_t)to % mtd->writesize)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&flash->lock);
|
|
|
|
ret = sst25l_write_enable(flash, 1);
|
|
if (ret)
|
|
goto out;
|
|
|
|
for (i = 0; i < len; i += mtd->writesize) {
|
|
ret = sst25l_wait_till_ready(flash);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/* Write the first byte of the page */
|
|
command[0] = SST25L_CMD_AAI_PROGRAM;
|
|
command[1] = (to + i) >> 16;
|
|
command[2] = (to + i) >> 8;
|
|
command[3] = (to + i);
|
|
command[4] = buf[i];
|
|
ret = spi_write(flash->spi, command, 5);
|
|
if (ret < 0)
|
|
goto out;
|
|
copied++;
|
|
|
|
/*
|
|
* Write the remaining bytes using auto address
|
|
* increment mode
|
|
*/
|
|
bytes = min_t(uint32_t, mtd->writesize, len - i);
|
|
for (j = 1; j < bytes; j++, copied++) {
|
|
ret = sst25l_wait_till_ready(flash);
|
|
if (ret)
|
|
goto out;
|
|
|
|
command[1] = buf[i + j];
|
|
ret = spi_write(flash->spi, command, 2);
|
|
if (ret)
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
out:
|
|
ret = sst25l_write_enable(flash, 0);
|
|
|
|
if (retlen)
|
|
*retlen = copied;
|
|
|
|
mutex_unlock(&flash->lock);
|
|
return ret;
|
|
}
|
|
|
|
static struct flash_info *__init sst25l_match_device(struct spi_device *spi)
|
|
{
|
|
struct flash_info *flash_info = NULL;
|
|
struct spi_message m;
|
|
struct spi_transfer t;
|
|
unsigned char cmd_resp[6];
|
|
int i, err;
|
|
uint16_t id;
|
|
|
|
spi_message_init(&m);
|
|
memset(&t, 0, sizeof(struct spi_transfer));
|
|
|
|
cmd_resp[0] = SST25L_CMD_READ_ID;
|
|
cmd_resp[1] = 0;
|
|
cmd_resp[2] = 0;
|
|
cmd_resp[3] = 0;
|
|
cmd_resp[4] = 0xff;
|
|
cmd_resp[5] = 0xff;
|
|
t.tx_buf = cmd_resp;
|
|
t.rx_buf = cmd_resp;
|
|
t.len = sizeof(cmd_resp);
|
|
spi_message_add_tail(&t, &m);
|
|
err = spi_sync(spi, &m);
|
|
if (err < 0) {
|
|
dev_err(&spi->dev, "error reading device id\n");
|
|
return NULL;
|
|
}
|
|
|
|
id = (cmd_resp[4] << 8) | cmd_resp[5];
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++)
|
|
if (sst25l_flash_info[i].device_id == id)
|
|
flash_info = &sst25l_flash_info[i];
|
|
|
|
if (!flash_info)
|
|
dev_err(&spi->dev, "unknown id %.4x\n", id);
|
|
|
|
return flash_info;
|
|
}
|
|
|
|
static int __init sst25l_probe(struct spi_device *spi)
|
|
{
|
|
struct flash_info *flash_info;
|
|
struct sst25l_flash *flash;
|
|
struct flash_platform_data *data;
|
|
int ret, i;
|
|
|
|
flash_info = sst25l_match_device(spi);
|
|
if (!flash_info)
|
|
return -ENODEV;
|
|
|
|
flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL);
|
|
if (!flash)
|
|
return -ENOMEM;
|
|
|
|
flash->spi = spi;
|
|
mutex_init(&flash->lock);
|
|
dev_set_drvdata(&spi->dev, flash);
|
|
|
|
data = spi->dev.platform_data;
|
|
if (data && data->name)
|
|
flash->mtd.name = data->name;
|
|
else
|
|
flash->mtd.name = dev_name(&spi->dev);
|
|
|
|
flash->mtd.type = MTD_NORFLASH;
|
|
flash->mtd.flags = MTD_CAP_NORFLASH;
|
|
flash->mtd.erasesize = flash_info->erase_size;
|
|
flash->mtd.writesize = flash_info->page_size;
|
|
flash->mtd.size = flash_info->page_size * flash_info->nr_pages;
|
|
flash->mtd.erase = sst25l_erase;
|
|
flash->mtd.read = sst25l_read;
|
|
flash->mtd.write = sst25l_write;
|
|
|
|
dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
|
|
(long long)flash->mtd.size >> 10);
|
|
|
|
DEBUG(MTD_DEBUG_LEVEL2,
|
|
"mtd .name = %s, .size = 0x%llx (%lldMiB) "
|
|
".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
|
|
flash->mtd.name,
|
|
(long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
|
|
flash->mtd.erasesize, flash->mtd.erasesize / 1024,
|
|
flash->mtd.numeraseregions);
|
|
|
|
if (mtd_has_partitions()) {
|
|
struct mtd_partition *parts = NULL;
|
|
int nr_parts = 0;
|
|
|
|
if (mtd_has_cmdlinepart()) {
|
|
static const char *part_probes[] =
|
|
{"cmdlinepart", NULL};
|
|
|
|
nr_parts = parse_mtd_partitions(&flash->mtd,
|
|
part_probes,
|
|
&parts, 0);
|
|
}
|
|
|
|
if (nr_parts <= 0 && data && data->parts) {
|
|
parts = data->parts;
|
|
nr_parts = data->nr_parts;
|
|
}
|
|
|
|
if (nr_parts > 0) {
|
|
for (i = 0; i < nr_parts; i++) {
|
|
DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
|
|
"{.name = %s, .offset = 0x%llx, "
|
|
".size = 0x%llx (%lldKiB) }\n",
|
|
i, parts[i].name,
|
|
(long long)parts[i].offset,
|
|
(long long)parts[i].size,
|
|
(long long)(parts[i].size >> 10));
|
|
}
|
|
|
|
flash->partitioned = 1;
|
|
return add_mtd_partitions(&flash->mtd,
|
|
parts, nr_parts);
|
|
}
|
|
|
|
} else if (data->nr_parts) {
|
|
dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
|
|
data->nr_parts, data->name);
|
|
}
|
|
|
|
ret = add_mtd_device(&flash->mtd);
|
|
if (ret == 1) {
|
|
kfree(flash);
|
|
dev_set_drvdata(&spi->dev, NULL);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __exit sst25l_remove(struct spi_device *spi)
|
|
{
|
|
struct sst25l_flash *flash = dev_get_drvdata(&spi->dev);
|
|
int ret;
|
|
|
|
if (mtd_has_partitions() && flash->partitioned)
|
|
ret = del_mtd_partitions(&flash->mtd);
|
|
else
|
|
ret = del_mtd_device(&flash->mtd);
|
|
if (ret == 0)
|
|
kfree(flash);
|
|
return ret;
|
|
}
|
|
|
|
static struct spi_driver sst25l_driver = {
|
|
.driver = {
|
|
.name = "sst25l",
|
|
.bus = &spi_bus_type,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = sst25l_probe,
|
|
.remove = __exit_p(sst25l_remove),
|
|
};
|
|
|
|
static int __init sst25l_init(void)
|
|
{
|
|
return spi_register_driver(&sst25l_driver);
|
|
}
|
|
|
|
static void __exit sst25l_exit(void)
|
|
{
|
|
spi_unregister_driver(&sst25l_driver);
|
|
}
|
|
|
|
module_init(sst25l_init);
|
|
module_exit(sst25l_exit);
|
|
|
|
MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips");
|
|
MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, "
|
|
"Ryan Mallon <ryan@bluewatersys.com>");
|
|
MODULE_LICENSE("GPL");
|