492 строки
12 KiB
C
492 строки
12 KiB
C
/*
|
|
* drivers/media/i2c/lm3560.c
|
|
* General device driver for TI lm3559, lm3560, FLASH LED Driver
|
|
*
|
|
* Copyright (C) 2013 Texas Instruments
|
|
*
|
|
* Contact: Daniel Jeong <gshark.jeong@gmail.com>
|
|
* Ldd-Mlp <ldd-mlp@list.ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/videodev2.h>
|
|
#include <media/i2c/lm3560.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
|
|
/* registers definitions */
|
|
#define REG_ENABLE 0x10
|
|
#define REG_TORCH_BR 0xa0
|
|
#define REG_FLASH_BR 0xb0
|
|
#define REG_FLASH_TOUT 0xc0
|
|
#define REG_FLAG 0xd0
|
|
#define REG_CONFIG1 0xe0
|
|
|
|
/* fault mask */
|
|
#define FAULT_TIMEOUT (1<<0)
|
|
#define FAULT_OVERTEMP (1<<1)
|
|
#define FAULT_SHORT_CIRCUIT (1<<2)
|
|
|
|
enum led_enable {
|
|
MODE_SHDN = 0x0,
|
|
MODE_TORCH = 0x2,
|
|
MODE_FLASH = 0x3,
|
|
};
|
|
|
|
/**
|
|
* struct lm3560_flash
|
|
*
|
|
* @dev: pointer to &struct device
|
|
* @pdata: platform data
|
|
* @regmap: reg. map for i2c
|
|
* @lock: muxtex for serial access.
|
|
* @led_mode: V4L2 LED mode
|
|
* @ctrls_led: V4L2 contols
|
|
* @subdev_led: V4L2 subdev
|
|
*/
|
|
struct lm3560_flash {
|
|
struct device *dev;
|
|
struct lm3560_platform_data *pdata;
|
|
struct regmap *regmap;
|
|
struct mutex lock;
|
|
|
|
enum v4l2_flash_led_mode led_mode;
|
|
struct v4l2_ctrl_handler ctrls_led[LM3560_LED_MAX];
|
|
struct v4l2_subdev subdev_led[LM3560_LED_MAX];
|
|
};
|
|
|
|
#define to_lm3560_flash(_ctrl, _no) \
|
|
container_of(_ctrl->handler, struct lm3560_flash, ctrls_led[_no])
|
|
|
|
/* enable mode control */
|
|
static int lm3560_mode_ctrl(struct lm3560_flash *flash)
|
|
{
|
|
int rval = -EINVAL;
|
|
|
|
switch (flash->led_mode) {
|
|
case V4L2_FLASH_LED_MODE_NONE:
|
|
rval = regmap_update_bits(flash->regmap,
|
|
REG_ENABLE, 0x03, MODE_SHDN);
|
|
break;
|
|
case V4L2_FLASH_LED_MODE_TORCH:
|
|
rval = regmap_update_bits(flash->regmap,
|
|
REG_ENABLE, 0x03, MODE_TORCH);
|
|
break;
|
|
case V4L2_FLASH_LED_MODE_FLASH:
|
|
rval = regmap_update_bits(flash->regmap,
|
|
REG_ENABLE, 0x03, MODE_FLASH);
|
|
break;
|
|
}
|
|
return rval;
|
|
}
|
|
|
|
/* led1/2 enable/disable */
|
|
static int lm3560_enable_ctrl(struct lm3560_flash *flash,
|
|
enum lm3560_led_id led_no, bool on)
|
|
{
|
|
int rval;
|
|
|
|
if (led_no == LM3560_LED0) {
|
|
if (on)
|
|
rval = regmap_update_bits(flash->regmap,
|
|
REG_ENABLE, 0x08, 0x08);
|
|
else
|
|
rval = regmap_update_bits(flash->regmap,
|
|
REG_ENABLE, 0x08, 0x00);
|
|
} else {
|
|
if (on)
|
|
rval = regmap_update_bits(flash->regmap,
|
|
REG_ENABLE, 0x10, 0x10);
|
|
else
|
|
rval = regmap_update_bits(flash->regmap,
|
|
REG_ENABLE, 0x10, 0x00);
|
|
}
|
|
return rval;
|
|
}
|
|
|
|
/* torch1/2 brightness control */
|
|
static int lm3560_torch_brt_ctrl(struct lm3560_flash *flash,
|
|
enum lm3560_led_id led_no, unsigned int brt)
|
|
{
|
|
int rval;
|
|
u8 br_bits;
|
|
|
|
if (brt < LM3560_TORCH_BRT_MIN)
|
|
return lm3560_enable_ctrl(flash, led_no, false);
|
|
else
|
|
rval = lm3560_enable_ctrl(flash, led_no, true);
|
|
|
|
br_bits = LM3560_TORCH_BRT_uA_TO_REG(brt);
|
|
if (led_no == LM3560_LED0)
|
|
rval = regmap_update_bits(flash->regmap,
|
|
REG_TORCH_BR, 0x07, br_bits);
|
|
else
|
|
rval = regmap_update_bits(flash->regmap,
|
|
REG_TORCH_BR, 0x38, br_bits << 3);
|
|
|
|
return rval;
|
|
}
|
|
|
|
/* flash1/2 brightness control */
|
|
static int lm3560_flash_brt_ctrl(struct lm3560_flash *flash,
|
|
enum lm3560_led_id led_no, unsigned int brt)
|
|
{
|
|
int rval;
|
|
u8 br_bits;
|
|
|
|
if (brt < LM3560_FLASH_BRT_MIN)
|
|
return lm3560_enable_ctrl(flash, led_no, false);
|
|
else
|
|
rval = lm3560_enable_ctrl(flash, led_no, true);
|
|
|
|
br_bits = LM3560_FLASH_BRT_uA_TO_REG(brt);
|
|
if (led_no == LM3560_LED0)
|
|
rval = regmap_update_bits(flash->regmap,
|
|
REG_FLASH_BR, 0x0f, br_bits);
|
|
else
|
|
rval = regmap_update_bits(flash->regmap,
|
|
REG_FLASH_BR, 0xf0, br_bits << 4);
|
|
|
|
return rval;
|
|
}
|
|
|
|
/* v4l2 controls */
|
|
static int lm3560_get_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
|
|
{
|
|
struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no);
|
|
int rval = -EINVAL;
|
|
|
|
mutex_lock(&flash->lock);
|
|
|
|
if (ctrl->id == V4L2_CID_FLASH_FAULT) {
|
|
s32 fault = 0;
|
|
unsigned int reg_val;
|
|
rval = regmap_read(flash->regmap, REG_FLAG, ®_val);
|
|
if (rval < 0)
|
|
goto out;
|
|
if (reg_val & FAULT_SHORT_CIRCUIT)
|
|
fault |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
|
|
if (reg_val & FAULT_OVERTEMP)
|
|
fault |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
|
|
if (reg_val & FAULT_TIMEOUT)
|
|
fault |= V4L2_FLASH_FAULT_TIMEOUT;
|
|
ctrl->cur.val = fault;
|
|
}
|
|
|
|
out:
|
|
mutex_unlock(&flash->lock);
|
|
return rval;
|
|
}
|
|
|
|
static int lm3560_set_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
|
|
{
|
|
struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no);
|
|
u8 tout_bits;
|
|
int rval = -EINVAL;
|
|
|
|
mutex_lock(&flash->lock);
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_FLASH_LED_MODE:
|
|
flash->led_mode = ctrl->val;
|
|
if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
|
|
rval = lm3560_mode_ctrl(flash);
|
|
break;
|
|
|
|
case V4L2_CID_FLASH_STROBE_SOURCE:
|
|
rval = regmap_update_bits(flash->regmap,
|
|
REG_CONFIG1, 0x04, (ctrl->val) << 2);
|
|
if (rval < 0)
|
|
goto err_out;
|
|
break;
|
|
|
|
case V4L2_CID_FLASH_STROBE:
|
|
if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) {
|
|
rval = -EBUSY;
|
|
goto err_out;
|
|
}
|
|
flash->led_mode = V4L2_FLASH_LED_MODE_FLASH;
|
|
rval = lm3560_mode_ctrl(flash);
|
|
break;
|
|
|
|
case V4L2_CID_FLASH_STROBE_STOP:
|
|
if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) {
|
|
rval = -EBUSY;
|
|
goto err_out;
|
|
}
|
|
flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
|
|
rval = lm3560_mode_ctrl(flash);
|
|
break;
|
|
|
|
case V4L2_CID_FLASH_TIMEOUT:
|
|
tout_bits = LM3560_FLASH_TOUT_ms_TO_REG(ctrl->val);
|
|
rval = regmap_update_bits(flash->regmap,
|
|
REG_FLASH_TOUT, 0x1f, tout_bits);
|
|
break;
|
|
|
|
case V4L2_CID_FLASH_INTENSITY:
|
|
rval = lm3560_flash_brt_ctrl(flash, led_no, ctrl->val);
|
|
break;
|
|
|
|
case V4L2_CID_FLASH_TORCH_INTENSITY:
|
|
rval = lm3560_torch_brt_ctrl(flash, led_no, ctrl->val);
|
|
break;
|
|
}
|
|
|
|
err_out:
|
|
mutex_unlock(&flash->lock);
|
|
return rval;
|
|
}
|
|
|
|
static int lm3560_led1_get_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
return lm3560_get_ctrl(ctrl, LM3560_LED1);
|
|
}
|
|
|
|
static int lm3560_led1_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
return lm3560_set_ctrl(ctrl, LM3560_LED1);
|
|
}
|
|
|
|
static int lm3560_led0_get_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
return lm3560_get_ctrl(ctrl, LM3560_LED0);
|
|
}
|
|
|
|
static int lm3560_led0_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
return lm3560_set_ctrl(ctrl, LM3560_LED0);
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops lm3560_led_ctrl_ops[LM3560_LED_MAX] = {
|
|
[LM3560_LED0] = {
|
|
.g_volatile_ctrl = lm3560_led0_get_ctrl,
|
|
.s_ctrl = lm3560_led0_set_ctrl,
|
|
},
|
|
[LM3560_LED1] = {
|
|
.g_volatile_ctrl = lm3560_led1_get_ctrl,
|
|
.s_ctrl = lm3560_led1_set_ctrl,
|
|
}
|
|
};
|
|
|
|
static int lm3560_init_controls(struct lm3560_flash *flash,
|
|
enum lm3560_led_id led_no)
|
|
{
|
|
struct v4l2_ctrl *fault;
|
|
u32 max_flash_brt = flash->pdata->max_flash_brt[led_no];
|
|
u32 max_torch_brt = flash->pdata->max_torch_brt[led_no];
|
|
struct v4l2_ctrl_handler *hdl = &flash->ctrls_led[led_no];
|
|
const struct v4l2_ctrl_ops *ops = &lm3560_led_ctrl_ops[led_no];
|
|
|
|
v4l2_ctrl_handler_init(hdl, 8);
|
|
|
|
/* flash mode */
|
|
v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_LED_MODE,
|
|
V4L2_FLASH_LED_MODE_TORCH, ~0x7,
|
|
V4L2_FLASH_LED_MODE_NONE);
|
|
flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
|
|
|
|
/* flash source */
|
|
v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_STROBE_SOURCE,
|
|
0x1, ~0x3, V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
|
|
|
|
/* flash strobe */
|
|
v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
|
|
|
|
/* flash strobe stop */
|
|
v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
|
|
|
|
/* flash strobe timeout */
|
|
v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TIMEOUT,
|
|
LM3560_FLASH_TOUT_MIN,
|
|
flash->pdata->max_flash_timeout,
|
|
LM3560_FLASH_TOUT_STEP,
|
|
flash->pdata->max_flash_timeout);
|
|
|
|
/* flash brt */
|
|
v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_INTENSITY,
|
|
LM3560_FLASH_BRT_MIN, max_flash_brt,
|
|
LM3560_FLASH_BRT_STEP, max_flash_brt);
|
|
|
|
/* torch brt */
|
|
v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TORCH_INTENSITY,
|
|
LM3560_TORCH_BRT_MIN, max_torch_brt,
|
|
LM3560_TORCH_BRT_STEP, max_torch_brt);
|
|
|
|
/* fault */
|
|
fault = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_FAULT, 0,
|
|
V4L2_FLASH_FAULT_OVER_VOLTAGE
|
|
| V4L2_FLASH_FAULT_OVER_TEMPERATURE
|
|
| V4L2_FLASH_FAULT_SHORT_CIRCUIT
|
|
| V4L2_FLASH_FAULT_TIMEOUT, 0, 0);
|
|
if (fault != NULL)
|
|
fault->flags |= V4L2_CTRL_FLAG_VOLATILE;
|
|
|
|
if (hdl->error)
|
|
return hdl->error;
|
|
|
|
flash->subdev_led[led_no].ctrl_handler = hdl;
|
|
return 0;
|
|
}
|
|
|
|
/* initialize device */
|
|
static const struct v4l2_subdev_ops lm3560_ops = {
|
|
.core = NULL,
|
|
};
|
|
|
|
static const struct regmap_config lm3560_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0xFF,
|
|
};
|
|
|
|
static int lm3560_subdev_init(struct lm3560_flash *flash,
|
|
enum lm3560_led_id led_no, char *led_name)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(flash->dev);
|
|
int rval;
|
|
|
|
v4l2_i2c_subdev_init(&flash->subdev_led[led_no], client, &lm3560_ops);
|
|
flash->subdev_led[led_no].flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
strscpy(flash->subdev_led[led_no].name, led_name,
|
|
sizeof(flash->subdev_led[led_no].name));
|
|
rval = lm3560_init_controls(flash, led_no);
|
|
if (rval)
|
|
goto err_out;
|
|
rval = media_entity_pads_init(&flash->subdev_led[led_no].entity, 0, NULL);
|
|
if (rval < 0)
|
|
goto err_out;
|
|
flash->subdev_led[led_no].entity.function = MEDIA_ENT_F_FLASH;
|
|
|
|
return rval;
|
|
|
|
err_out:
|
|
v4l2_ctrl_handler_free(&flash->ctrls_led[led_no]);
|
|
return rval;
|
|
}
|
|
|
|
static int lm3560_init_device(struct lm3560_flash *flash)
|
|
{
|
|
int rval;
|
|
unsigned int reg_val;
|
|
|
|
/* set peak current */
|
|
rval = regmap_update_bits(flash->regmap,
|
|
REG_FLASH_TOUT, 0x60, flash->pdata->peak);
|
|
if (rval < 0)
|
|
return rval;
|
|
/* output disable */
|
|
flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
|
|
rval = lm3560_mode_ctrl(flash);
|
|
if (rval < 0)
|
|
return rval;
|
|
/* reset faults */
|
|
rval = regmap_read(flash->regmap, REG_FLAG, ®_val);
|
|
return rval;
|
|
}
|
|
|
|
static int lm3560_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *devid)
|
|
{
|
|
struct lm3560_flash *flash;
|
|
struct lm3560_platform_data *pdata = dev_get_platdata(&client->dev);
|
|
int rval;
|
|
|
|
flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
|
|
if (flash == NULL)
|
|
return -ENOMEM;
|
|
|
|
flash->regmap = devm_regmap_init_i2c(client, &lm3560_regmap);
|
|
if (IS_ERR(flash->regmap)) {
|
|
rval = PTR_ERR(flash->regmap);
|
|
return rval;
|
|
}
|
|
|
|
/* if there is no platform data, use chip default value */
|
|
if (pdata == NULL) {
|
|
pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (pdata == NULL)
|
|
return -ENODEV;
|
|
pdata->peak = LM3560_PEAK_3600mA;
|
|
pdata->max_flash_timeout = LM3560_FLASH_TOUT_MAX;
|
|
/* led 1 */
|
|
pdata->max_flash_brt[LM3560_LED0] = LM3560_FLASH_BRT_MAX;
|
|
pdata->max_torch_brt[LM3560_LED0] = LM3560_TORCH_BRT_MAX;
|
|
/* led 2 */
|
|
pdata->max_flash_brt[LM3560_LED1] = LM3560_FLASH_BRT_MAX;
|
|
pdata->max_torch_brt[LM3560_LED1] = LM3560_TORCH_BRT_MAX;
|
|
}
|
|
flash->pdata = pdata;
|
|
flash->dev = &client->dev;
|
|
mutex_init(&flash->lock);
|
|
|
|
rval = lm3560_subdev_init(flash, LM3560_LED0, "lm3560-led0");
|
|
if (rval < 0)
|
|
return rval;
|
|
|
|
rval = lm3560_subdev_init(flash, LM3560_LED1, "lm3560-led1");
|
|
if (rval < 0)
|
|
return rval;
|
|
|
|
rval = lm3560_init_device(flash);
|
|
if (rval < 0)
|
|
return rval;
|
|
|
|
i2c_set_clientdata(client, flash);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lm3560_remove(struct i2c_client *client)
|
|
{
|
|
struct lm3560_flash *flash = i2c_get_clientdata(client);
|
|
unsigned int i;
|
|
|
|
for (i = LM3560_LED0; i < LM3560_LED_MAX; i++) {
|
|
v4l2_device_unregister_subdev(&flash->subdev_led[i]);
|
|
v4l2_ctrl_handler_free(&flash->ctrls_led[i]);
|
|
media_entity_cleanup(&flash->subdev_led[i].entity);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id lm3560_id_table[] = {
|
|
{LM3559_NAME, 0},
|
|
{LM3560_NAME, 0},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, lm3560_id_table);
|
|
|
|
static struct i2c_driver lm3560_i2c_driver = {
|
|
.driver = {
|
|
.name = LM3560_NAME,
|
|
.pm = NULL,
|
|
},
|
|
.probe = lm3560_probe,
|
|
.remove = lm3560_remove,
|
|
.id_table = lm3560_id_table,
|
|
};
|
|
|
|
module_i2c_driver(lm3560_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>");
|
|
MODULE_AUTHOR("Ldd Mlp <ldd-mlp@list.ti.com>");
|
|
MODULE_DESCRIPTION("Texas Instruments LM3560 LED flash driver");
|
|
MODULE_LICENSE("GPL");
|