576 строки
15 KiB
C
576 строки
15 KiB
C
/*
|
|
* Exynos Specific Extensions for Synopsys DW Multimedia Card Interface driver
|
|
*
|
|
* Copyright (C) 2012, Samsung Electronics Co., Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/dw_mmc.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "dw_mmc.h"
|
|
#include "dw_mmc-pltfm.h"
|
|
#include "dw_mmc-exynos.h"
|
|
|
|
/* Variations in Exynos specific dw-mshc controller */
|
|
enum dw_mci_exynos_type {
|
|
DW_MCI_TYPE_EXYNOS4210,
|
|
DW_MCI_TYPE_EXYNOS4412,
|
|
DW_MCI_TYPE_EXYNOS5250,
|
|
DW_MCI_TYPE_EXYNOS5420,
|
|
DW_MCI_TYPE_EXYNOS5420_SMU,
|
|
DW_MCI_TYPE_EXYNOS7,
|
|
DW_MCI_TYPE_EXYNOS7_SMU,
|
|
};
|
|
|
|
/* Exynos implementation specific driver private data */
|
|
struct dw_mci_exynos_priv_data {
|
|
enum dw_mci_exynos_type ctrl_type;
|
|
u8 ciu_div;
|
|
u32 sdr_timing;
|
|
u32 ddr_timing;
|
|
u32 hs400_timing;
|
|
u32 tuned_sample;
|
|
u32 cur_speed;
|
|
u32 dqs_delay;
|
|
u32 saved_dqs_en;
|
|
u32 saved_strobe_ctrl;
|
|
};
|
|
|
|
static struct dw_mci_exynos_compatible {
|
|
char *compatible;
|
|
enum dw_mci_exynos_type ctrl_type;
|
|
} exynos_compat[] = {
|
|
{
|
|
.compatible = "samsung,exynos4210-dw-mshc",
|
|
.ctrl_type = DW_MCI_TYPE_EXYNOS4210,
|
|
}, {
|
|
.compatible = "samsung,exynos4412-dw-mshc",
|
|
.ctrl_type = DW_MCI_TYPE_EXYNOS4412,
|
|
}, {
|
|
.compatible = "samsung,exynos5250-dw-mshc",
|
|
.ctrl_type = DW_MCI_TYPE_EXYNOS5250,
|
|
}, {
|
|
.compatible = "samsung,exynos5420-dw-mshc",
|
|
.ctrl_type = DW_MCI_TYPE_EXYNOS5420,
|
|
}, {
|
|
.compatible = "samsung,exynos5420-dw-mshc-smu",
|
|
.ctrl_type = DW_MCI_TYPE_EXYNOS5420_SMU,
|
|
}, {
|
|
.compatible = "samsung,exynos7-dw-mshc",
|
|
.ctrl_type = DW_MCI_TYPE_EXYNOS7,
|
|
}, {
|
|
.compatible = "samsung,exynos7-dw-mshc-smu",
|
|
.ctrl_type = DW_MCI_TYPE_EXYNOS7_SMU,
|
|
},
|
|
};
|
|
|
|
static inline u8 dw_mci_exynos_get_ciu_div(struct dw_mci *host)
|
|
{
|
|
struct dw_mci_exynos_priv_data *priv = host->priv;
|
|
|
|
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4412)
|
|
return EXYNOS4412_FIXED_CIU_CLK_DIV;
|
|
else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210)
|
|
return EXYNOS4210_FIXED_CIU_CLK_DIV;
|
|
else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
|
|
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
|
|
return SDMMC_CLKSEL_GET_DIV(mci_readl(host, CLKSEL64)) + 1;
|
|
else
|
|
return SDMMC_CLKSEL_GET_DIV(mci_readl(host, CLKSEL)) + 1;
|
|
}
|
|
|
|
static void dw_mci_exynos_config_smu(struct dw_mci *host)
|
|
{
|
|
struct dw_mci_exynos_priv_data *priv = host->priv;
|
|
|
|
/*
|
|
* If Exynos is provided the Security management,
|
|
* set for non-ecryption mode at this time.
|
|
*/
|
|
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420_SMU ||
|
|
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) {
|
|
mci_writel(host, MPSBEGIN0, 0);
|
|
mci_writel(host, MPSEND0, SDMMC_ENDING_SEC_NR_MAX);
|
|
mci_writel(host, MPSCTRL0, SDMMC_MPSCTRL_SECURE_WRITE_BIT |
|
|
SDMMC_MPSCTRL_NON_SECURE_READ_BIT |
|
|
SDMMC_MPSCTRL_VALID |
|
|
SDMMC_MPSCTRL_NON_SECURE_WRITE_BIT);
|
|
}
|
|
}
|
|
|
|
static int dw_mci_exynos_priv_init(struct dw_mci *host)
|
|
{
|
|
struct dw_mci_exynos_priv_data *priv = host->priv;
|
|
|
|
dw_mci_exynos_config_smu(host);
|
|
|
|
if (priv->ctrl_type >= DW_MCI_TYPE_EXYNOS5420) {
|
|
priv->saved_strobe_ctrl = mci_readl(host, HS400_DLINE_CTRL);
|
|
priv->saved_dqs_en = mci_readl(host, HS400_DQS_EN);
|
|
priv->saved_dqs_en |= AXI_NON_BLOCKING_WR;
|
|
mci_writel(host, HS400_DQS_EN, priv->saved_dqs_en);
|
|
if (!priv->dqs_delay)
|
|
priv->dqs_delay =
|
|
DQS_CTRL_GET_RD_DELAY(priv->saved_strobe_ctrl);
|
|
}
|
|
|
|
host->bus_hz /= (priv->ciu_div + 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_mci_exynos_set_clksel_timing(struct dw_mci *host, u32 timing)
|
|
{
|
|
struct dw_mci_exynos_priv_data *priv = host->priv;
|
|
u32 clksel;
|
|
|
|
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
|
|
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
|
|
clksel = mci_readl(host, CLKSEL64);
|
|
else
|
|
clksel = mci_readl(host, CLKSEL);
|
|
|
|
clksel = (clksel & ~SDMMC_CLKSEL_TIMING_MASK) | timing;
|
|
|
|
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
|
|
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
|
|
mci_writel(host, CLKSEL64, clksel);
|
|
else
|
|
mci_writel(host, CLKSEL, clksel);
|
|
|
|
/*
|
|
* Exynos4412 and Exynos5250 extends the use of CMD register with the
|
|
* use of bit 29 (which is reserved on standard MSHC controllers) for
|
|
* optionally bypassing the HOLD register for command and data. The
|
|
* HOLD register should be bypassed in case there is no phase shift
|
|
* applied on CMD/DATA that is sent to the card.
|
|
*/
|
|
if (!SDMMC_CLKSEL_GET_DRV_WD3(clksel) && host->cur_slot)
|
|
set_bit(DW_MMC_CARD_NO_USE_HOLD, &host->cur_slot->flags);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int dw_mci_exynos_runtime_resume(struct device *dev)
|
|
{
|
|
struct dw_mci *host = dev_get_drvdata(dev);
|
|
|
|
dw_mci_exynos_config_smu(host);
|
|
return dw_mci_runtime_resume(dev);
|
|
}
|
|
|
|
/**
|
|
* dw_mci_exynos_resume_noirq - Exynos-specific resume code
|
|
*
|
|
* On exynos5420 there is a silicon errata that will sometimes leave the
|
|
* WAKEUP_INT bit in the CLKSEL register asserted. This bit is 1 to indicate
|
|
* that it fired and we can clear it by writing a 1 back. Clear it to prevent
|
|
* interrupts from going off constantly.
|
|
*
|
|
* We run this code on all exynos variants because it doesn't hurt.
|
|
*/
|
|
|
|
static int dw_mci_exynos_resume_noirq(struct device *dev)
|
|
{
|
|
struct dw_mci *host = dev_get_drvdata(dev);
|
|
struct dw_mci_exynos_priv_data *priv = host->priv;
|
|
u32 clksel;
|
|
|
|
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
|
|
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
|
|
clksel = mci_readl(host, CLKSEL64);
|
|
else
|
|
clksel = mci_readl(host, CLKSEL);
|
|
|
|
if (clksel & SDMMC_CLKSEL_WAKEUP_INT) {
|
|
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
|
|
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
|
|
mci_writel(host, CLKSEL64, clksel);
|
|
else
|
|
mci_writel(host, CLKSEL, clksel);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define dw_mci_exynos_resume_noirq NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
static void dw_mci_exynos_config_hs400(struct dw_mci *host, u32 timing)
|
|
{
|
|
struct dw_mci_exynos_priv_data *priv = host->priv;
|
|
u32 dqs, strobe;
|
|
|
|
/*
|
|
* Not supported to configure register
|
|
* related to HS400
|
|
*/
|
|
if (priv->ctrl_type < DW_MCI_TYPE_EXYNOS5420) {
|
|
if (timing == MMC_TIMING_MMC_HS400)
|
|
dev_warn(host->dev,
|
|
"cannot configure HS400, unsupported chipset\n");
|
|
return;
|
|
}
|
|
|
|
dqs = priv->saved_dqs_en;
|
|
strobe = priv->saved_strobe_ctrl;
|
|
|
|
if (timing == MMC_TIMING_MMC_HS400) {
|
|
dqs |= DATA_STROBE_EN;
|
|
strobe = DQS_CTRL_RD_DELAY(strobe, priv->dqs_delay);
|
|
} else {
|
|
dqs &= ~DATA_STROBE_EN;
|
|
}
|
|
|
|
mci_writel(host, HS400_DQS_EN, dqs);
|
|
mci_writel(host, HS400_DLINE_CTRL, strobe);
|
|
}
|
|
|
|
static void dw_mci_exynos_adjust_clock(struct dw_mci *host, unsigned int wanted)
|
|
{
|
|
struct dw_mci_exynos_priv_data *priv = host->priv;
|
|
unsigned long actual;
|
|
u8 div;
|
|
int ret;
|
|
/*
|
|
* Don't care if wanted clock is zero or
|
|
* ciu clock is unavailable
|
|
*/
|
|
if (!wanted || IS_ERR(host->ciu_clk))
|
|
return;
|
|
|
|
/* Guaranteed minimum frequency for cclkin */
|
|
if (wanted < EXYNOS_CCLKIN_MIN)
|
|
wanted = EXYNOS_CCLKIN_MIN;
|
|
|
|
if (wanted == priv->cur_speed)
|
|
return;
|
|
|
|
div = dw_mci_exynos_get_ciu_div(host);
|
|
ret = clk_set_rate(host->ciu_clk, wanted * div);
|
|
if (ret)
|
|
dev_warn(host->dev,
|
|
"failed to set clk-rate %u error: %d\n",
|
|
wanted * div, ret);
|
|
actual = clk_get_rate(host->ciu_clk);
|
|
host->bus_hz = actual / div;
|
|
priv->cur_speed = wanted;
|
|
host->current_speed = 0;
|
|
}
|
|
|
|
static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
|
|
{
|
|
struct dw_mci_exynos_priv_data *priv = host->priv;
|
|
unsigned int wanted = ios->clock;
|
|
u32 timing = ios->timing, clksel;
|
|
|
|
switch (timing) {
|
|
case MMC_TIMING_MMC_HS400:
|
|
/* Update tuned sample timing */
|
|
clksel = SDMMC_CLKSEL_UP_SAMPLE(
|
|
priv->hs400_timing, priv->tuned_sample);
|
|
wanted <<= 1;
|
|
break;
|
|
case MMC_TIMING_MMC_DDR52:
|
|
clksel = priv->ddr_timing;
|
|
/* Should be double rate for DDR mode */
|
|
if (ios->bus_width == MMC_BUS_WIDTH_8)
|
|
wanted <<= 1;
|
|
break;
|
|
default:
|
|
clksel = priv->sdr_timing;
|
|
}
|
|
|
|
/* Set clock timing for the requested speed mode*/
|
|
dw_mci_exynos_set_clksel_timing(host, clksel);
|
|
|
|
/* Configure setting for HS400 */
|
|
dw_mci_exynos_config_hs400(host, timing);
|
|
|
|
/* Configure clock rate */
|
|
dw_mci_exynos_adjust_clock(host, wanted);
|
|
}
|
|
|
|
static int dw_mci_exynos_parse_dt(struct dw_mci *host)
|
|
{
|
|
struct dw_mci_exynos_priv_data *priv;
|
|
struct device_node *np = host->dev->of_node;
|
|
u32 timing[2];
|
|
u32 div = 0;
|
|
int idx;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
for (idx = 0; idx < ARRAY_SIZE(exynos_compat); idx++) {
|
|
if (of_device_is_compatible(np, exynos_compat[idx].compatible))
|
|
priv->ctrl_type = exynos_compat[idx].ctrl_type;
|
|
}
|
|
|
|
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4412)
|
|
priv->ciu_div = EXYNOS4412_FIXED_CIU_CLK_DIV - 1;
|
|
else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210)
|
|
priv->ciu_div = EXYNOS4210_FIXED_CIU_CLK_DIV - 1;
|
|
else {
|
|
of_property_read_u32(np, "samsung,dw-mshc-ciu-div", &div);
|
|
priv->ciu_div = div;
|
|
}
|
|
|
|
ret = of_property_read_u32_array(np,
|
|
"samsung,dw-mshc-sdr-timing", timing, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->sdr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div);
|
|
|
|
ret = of_property_read_u32_array(np,
|
|
"samsung,dw-mshc-ddr-timing", timing, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->ddr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div);
|
|
|
|
ret = of_property_read_u32_array(np,
|
|
"samsung,dw-mshc-hs400-timing", timing, 2);
|
|
if (!ret && of_property_read_u32(np,
|
|
"samsung,read-strobe-delay", &priv->dqs_delay))
|
|
dev_dbg(host->dev,
|
|
"read-strobe-delay is not found, assuming usage of default value\n");
|
|
|
|
priv->hs400_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1],
|
|
HS400_FIXED_CIU_CLK_DIV);
|
|
host->priv = priv;
|
|
return 0;
|
|
}
|
|
|
|
static inline u8 dw_mci_exynos_get_clksmpl(struct dw_mci *host)
|
|
{
|
|
struct dw_mci_exynos_priv_data *priv = host->priv;
|
|
|
|
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
|
|
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
|
|
return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL64));
|
|
else
|
|
return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL));
|
|
}
|
|
|
|
static inline void dw_mci_exynos_set_clksmpl(struct dw_mci *host, u8 sample)
|
|
{
|
|
u32 clksel;
|
|
struct dw_mci_exynos_priv_data *priv = host->priv;
|
|
|
|
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
|
|
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
|
|
clksel = mci_readl(host, CLKSEL64);
|
|
else
|
|
clksel = mci_readl(host, CLKSEL);
|
|
clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample);
|
|
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
|
|
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
|
|
mci_writel(host, CLKSEL64, clksel);
|
|
else
|
|
mci_writel(host, CLKSEL, clksel);
|
|
}
|
|
|
|
static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host)
|
|
{
|
|
struct dw_mci_exynos_priv_data *priv = host->priv;
|
|
u32 clksel;
|
|
u8 sample;
|
|
|
|
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
|
|
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
|
|
clksel = mci_readl(host, CLKSEL64);
|
|
else
|
|
clksel = mci_readl(host, CLKSEL);
|
|
|
|
sample = (clksel + 1) & 0x7;
|
|
clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample);
|
|
|
|
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
|
|
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
|
|
mci_writel(host, CLKSEL64, clksel);
|
|
else
|
|
mci_writel(host, CLKSEL, clksel);
|
|
|
|
return sample;
|
|
}
|
|
|
|
static s8 dw_mci_exynos_get_best_clksmpl(u8 candiates)
|
|
{
|
|
const u8 iter = 8;
|
|
u8 __c;
|
|
s8 i, loc = -1;
|
|
|
|
for (i = 0; i < iter; i++) {
|
|
__c = ror8(candiates, i);
|
|
if ((__c & 0xc7) == 0xc7) {
|
|
loc = i;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < iter; i++) {
|
|
__c = ror8(candiates, i);
|
|
if ((__c & 0x83) == 0x83) {
|
|
loc = i;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
out:
|
|
return loc;
|
|
}
|
|
|
|
static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
|
|
{
|
|
struct dw_mci *host = slot->host;
|
|
struct dw_mci_exynos_priv_data *priv = host->priv;
|
|
struct mmc_host *mmc = slot->mmc;
|
|
u8 start_smpl, smpl, candiates = 0;
|
|
s8 found = -1;
|
|
int ret = 0;
|
|
|
|
start_smpl = dw_mci_exynos_get_clksmpl(host);
|
|
|
|
do {
|
|
mci_writel(host, TMOUT, ~0);
|
|
smpl = dw_mci_exynos_move_next_clksmpl(host);
|
|
|
|
if (!mmc_send_tuning(mmc, opcode, NULL))
|
|
candiates |= (1 << smpl);
|
|
|
|
} while (start_smpl != smpl);
|
|
|
|
found = dw_mci_exynos_get_best_clksmpl(candiates);
|
|
if (found >= 0) {
|
|
dw_mci_exynos_set_clksmpl(host, found);
|
|
priv->tuned_sample = found;
|
|
} else {
|
|
ret = -EIO;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dw_mci_exynos_prepare_hs400_tuning(struct dw_mci *host,
|
|
struct mmc_ios *ios)
|
|
{
|
|
struct dw_mci_exynos_priv_data *priv = host->priv;
|
|
|
|
dw_mci_exynos_set_clksel_timing(host, priv->hs400_timing);
|
|
dw_mci_exynos_adjust_clock(host, (ios->clock) << 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Common capabilities of Exynos4/Exynos5 SoC */
|
|
static unsigned long exynos_dwmmc_caps[4] = {
|
|
MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23,
|
|
MMC_CAP_CMD23,
|
|
MMC_CAP_CMD23,
|
|
MMC_CAP_CMD23,
|
|
};
|
|
|
|
static const struct dw_mci_drv_data exynos_drv_data = {
|
|
.caps = exynos_dwmmc_caps,
|
|
.init = dw_mci_exynos_priv_init,
|
|
.set_ios = dw_mci_exynos_set_ios,
|
|
.parse_dt = dw_mci_exynos_parse_dt,
|
|
.execute_tuning = dw_mci_exynos_execute_tuning,
|
|
.prepare_hs400_tuning = dw_mci_exynos_prepare_hs400_tuning,
|
|
};
|
|
|
|
static const struct of_device_id dw_mci_exynos_match[] = {
|
|
{ .compatible = "samsung,exynos4412-dw-mshc",
|
|
.data = &exynos_drv_data, },
|
|
{ .compatible = "samsung,exynos5250-dw-mshc",
|
|
.data = &exynos_drv_data, },
|
|
{ .compatible = "samsung,exynos5420-dw-mshc",
|
|
.data = &exynos_drv_data, },
|
|
{ .compatible = "samsung,exynos5420-dw-mshc-smu",
|
|
.data = &exynos_drv_data, },
|
|
{ .compatible = "samsung,exynos7-dw-mshc",
|
|
.data = &exynos_drv_data, },
|
|
{ .compatible = "samsung,exynos7-dw-mshc-smu",
|
|
.data = &exynos_drv_data, },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, dw_mci_exynos_match);
|
|
|
|
static int dw_mci_exynos_probe(struct platform_device *pdev)
|
|
{
|
|
const struct dw_mci_drv_data *drv_data;
|
|
const struct of_device_id *match;
|
|
int ret;
|
|
|
|
match = of_match_node(dw_mci_exynos_match, pdev->dev.of_node);
|
|
drv_data = match->data;
|
|
|
|
pm_runtime_get_noresume(&pdev->dev);
|
|
pm_runtime_set_active(&pdev->dev);
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
ret = dw_mci_pltfm_register(pdev, drv_data);
|
|
if (ret) {
|
|
pm_runtime_disable(&pdev->dev);
|
|
pm_runtime_set_suspended(&pdev->dev);
|
|
pm_runtime_put_noidle(&pdev->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mci_exynos_remove(struct platform_device *pdev)
|
|
{
|
|
pm_runtime_disable(&pdev->dev);
|
|
pm_runtime_set_suspended(&pdev->dev);
|
|
pm_runtime_put_noidle(&pdev->dev);
|
|
|
|
return dw_mci_pltfm_remove(pdev);
|
|
}
|
|
|
|
static const struct dev_pm_ops dw_mci_exynos_pmops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
|
|
pm_runtime_force_resume)
|
|
SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend,
|
|
dw_mci_exynos_runtime_resume,
|
|
NULL)
|
|
.resume_noirq = dw_mci_exynos_resume_noirq,
|
|
.thaw_noirq = dw_mci_exynos_resume_noirq,
|
|
.restore_noirq = dw_mci_exynos_resume_noirq,
|
|
};
|
|
|
|
static struct platform_driver dw_mci_exynos_pltfm_driver = {
|
|
.probe = dw_mci_exynos_probe,
|
|
.remove = dw_mci_exynos_remove,
|
|
.driver = {
|
|
.name = "dwmmc_exynos",
|
|
.of_match_table = dw_mci_exynos_match,
|
|
.pm = &dw_mci_exynos_pmops,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(dw_mci_exynos_pltfm_driver);
|
|
|
|
MODULE_DESCRIPTION("Samsung Specific DW-MSHC Driver Extension");
|
|
MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:dwmmc_exynos");
|