WSL2-Linux-Kernel/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml

200 строки
5.2 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# # Copyright (c) 2021 Aspeed Tehchnology Inc.
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Aspeed Low Pin Count (LPC) Bus Controller
maintainers:
- Andrew Jeffery <andrew@aj.id.au>
- Chia-Wei Wang <chiawei_wang@aspeedtech.com>
description:
The LPC bus is a means to bridge a host CPU to a number of low-bandwidth
peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The
primary use case of the Aspeed LPC controller is as a slave on the bus
(typically in a Baseboard Management Controller SoC), but under certain
conditions it can also take the role of bus master.
The LPC controller is represented as a multi-function device to account for the
mix of functionality, which includes, but is not limited to
* An IPMI Block Transfer[2] Controller
* An LPC Host Interface Controller manages functions exposed to the host such
as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
management and bus snoop configuration.
* A set of SuperIO[3] scratch registers enableing implementation of e.g. custom
hardware management protocols for handover between the host and baseboard
management controller.
Additionally the state of the LPC controller influences the pinmux
configuration, therefore the host portion of the controller is exposed as a
syscon as a means to arbitrate access.
properties:
compatible:
items:
- enum:
- aspeed,ast2400-lpc-v2
- aspeed,ast2500-lpc-v2
- aspeed,ast2600-lpc-v2
- const: simple-mfd
- const: syscon
reg:
maxItems: 1
"#address-cells":
const: 1
"#size-cells":
const: 1
ranges: true
patternProperties:
"^lpc-ctrl@[0-9a-f]+$":
type: object
additionalProperties: false
description: |
The LPC Host Interface Controller manages functions exposed to the host such as
LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART management
and bus snoop configuration.
properties:
compatible:
items:
- enum:
- aspeed,ast2400-lpc-ctrl
- aspeed,ast2500-lpc-ctrl
- aspeed,ast2600-lpc-ctrl
reg:
maxItems: 1
clocks:
maxItems: 1
memory-region:
maxItems: 1
description: handle to memory reservation for the LPC to AHB mapping region
flash:
$ref: /schemas/types.yaml#/definitions/phandle
description: The SPI flash controller containing the flash to be exposed over the LPC to AHB mapping
required:
- compatible
- clocks
"^reset-controller@[0-9a-f]+$":
type: object
additionalProperties: false
description:
The UARTs present in the ASPEED SoC can have their resets tied to the reset
state of the LPC bus. Some systems may chose to modify this configuration
properties:
compatible:
items:
- enum:
- aspeed,ast2400-lpc-reset
- aspeed,ast2500-lpc-reset
- aspeed,ast2600-lpc-reset
reg:
maxItems: 1
'#reset-cells':
const: 1
required:
- compatible
- '#reset-cells'
"^lpc-snoop@[0-9a-f]+$":
type: object
additionalProperties: false
description:
The LPC snoop interface allows the BMC to listen on and record the data
bytes written by the Host to the targeted LPC I/O pots.
properties:
compatible:
items:
- enum:
- aspeed,ast2400-lpc-snoop
- aspeed,ast2500-lpc-snoop
- aspeed,ast2600-lpc-snoop
reg:
maxItems: 1
interrupts:
maxItems: 1
snoop-ports:
$ref: /schemas/types.yaml#/definitions/uint32-array
description: The LPC I/O ports to snoop
required:
- compatible
- interrupts
- snoop-ports
"^uart-routing@[0-9a-f]+$":
$ref: /schemas/soc/aspeed/uart-routing.yaml#
description: The UART routing control under LPC register space
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
- ranges
additionalProperties:
type: object
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/ast2600-clock.h>
lpc: lpc@1e789000 {
compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
reg = <0x1e789000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x1e789000 0x1000>;
lpc_ctrl: lpc-ctrl@80 {
compatible = "aspeed,ast2600-lpc-ctrl";
reg = <0x80 0x80>;
clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
memory-region = <&flash_memory>;
flash = <&spi>;
};
lpc_reset: reset-controller@98 {
compatible = "aspeed,ast2600-lpc-reset";
reg = <0x98 0x4>;
#reset-cells = <1>;
};
lpc_snoop: lpc-snoop@90 {
compatible = "aspeed,ast2600-lpc-snoop";
reg = <0x90 0x8>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
snoop-ports = <0x80>;
};
};