202 строки
4.8 KiB
YAML
202 строки
4.8 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Gateworks System Controller
|
|
|
|
description: |
|
|
The Gateworks System Controller (GSC) is a device present across various
|
|
Gateworks product families that provides a set of system related features
|
|
such as the following (refer to the board hardware user manuals to see what
|
|
features are present)
|
|
- Watchdog Timer
|
|
- GPIO
|
|
- Pushbutton controller
|
|
- Hardware monitor with ADC's for temperature and voltage rails and
|
|
fan controller
|
|
|
|
maintainers:
|
|
- Tim Harvey <tharvey@gateworks.com>
|
|
- Robert Jones <rjones@gateworks.com>
|
|
|
|
properties:
|
|
$nodename:
|
|
pattern: "gsc@[0-9a-f]{1,2}"
|
|
compatible:
|
|
const: gw,gsc
|
|
|
|
reg:
|
|
description: I2C device address
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
|
|
"#interrupt-cells":
|
|
const: 1
|
|
|
|
"#address-cells":
|
|
const: 1
|
|
|
|
"#size-cells":
|
|
const: 0
|
|
|
|
adc:
|
|
type: object
|
|
description: Optional hardware monitoring module
|
|
|
|
properties:
|
|
compatible:
|
|
const: gw,gsc-adc
|
|
|
|
"#address-cells":
|
|
const: 1
|
|
|
|
"#size-cells":
|
|
const: 0
|
|
|
|
patternProperties:
|
|
"^channel@[0-9]+$":
|
|
type: object
|
|
description: |
|
|
Properties for a single ADC which can report cooked values
|
|
(i.e. temperature sensor based on thermister), raw values
|
|
(i.e. voltage rail with a pre-scaling resistor divider).
|
|
|
|
properties:
|
|
reg:
|
|
description: Register of the ADC
|
|
maxItems: 1
|
|
|
|
label:
|
|
description: Name of the ADC input
|
|
|
|
gw,mode:
|
|
description: |
|
|
conversion mode:
|
|
0 - temperature, in C*10
|
|
1 - pre-scaled 24-bit voltage value
|
|
2 - scaled voltage based on an optional resistor divider
|
|
and optional offset
|
|
3 - pre-scaled 16-bit voltage value
|
|
4 - fan tach input to report RPM's
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1, 2, 3, 4]
|
|
|
|
gw,voltage-divider-ohms:
|
|
description: Values of resistors for divider on raw ADC input
|
|
maxItems: 2
|
|
items:
|
|
minimum: 1000
|
|
maximum: 1000000
|
|
|
|
gw,voltage-offset-microvolt:
|
|
description: |
|
|
A positive voltage offset to apply to a raw ADC
|
|
(i.e. to compensate for a diode drop).
|
|
minimum: 0
|
|
maximum: 1000000
|
|
|
|
required:
|
|
- gw,mode
|
|
- reg
|
|
- label
|
|
|
|
required:
|
|
- compatible
|
|
- "#address-cells"
|
|
- "#size-cells"
|
|
|
|
patternProperties:
|
|
"^fan-controller@[0-9a-f]+$":
|
|
type: object
|
|
description: Optional fan controller
|
|
|
|
properties:
|
|
compatible:
|
|
const: gw,gsc-fan
|
|
|
|
"#address-cells":
|
|
const: 1
|
|
|
|
"#size-cells":
|
|
const: 0
|
|
|
|
reg:
|
|
description: The fan controller base address
|
|
maxItems: 1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- "#address-cells"
|
|
- "#size-cells"
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- interrupt-controller
|
|
- "#interrupt-cells"
|
|
- "#address-cells"
|
|
- "#size-cells"
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
gsc@20 {
|
|
compatible = "gw,gsc";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
adc {
|
|
compatible = "gw,gsc-adc";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
channel@0 { /* A0: Board Temperature */
|
|
reg = <0x00>;
|
|
label = "temp";
|
|
gw,mode = <0>;
|
|
};
|
|
|
|
channel@2 { /* A1: Input Voltage (raw ADC) */
|
|
reg = <0x02>;
|
|
label = "vdd_vin";
|
|
gw,mode = <1>;
|
|
gw,voltage-divider-ohms = <22100 1000>;
|
|
gw,voltage-offset-microvolt = <800000>;
|
|
};
|
|
|
|
channel@b { /* A2: Battery voltage */
|
|
reg = <0x0b>;
|
|
label = "vdd_bat";
|
|
gw,mode = <1>;
|
|
};
|
|
};
|
|
|
|
fan-controller@2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "gw,gsc-fan";
|
|
reg = <0x2c>;
|
|
};
|
|
};
|
|
};
|