WSL2-Linux-Kernel/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt

113 строки
2.9 KiB
Plaintext

* APM X-Gene SoC PMU bindings
This is APM X-Gene SoC PMU (Performance Monitoring Unit) module.
The following PMU devices are supported:
L3C - L3 cache controller
IOB - IO bridge
MCB - Memory controller bridge
MC - Memory controller
The following section describes the SoC PMU DT node binding.
Required properties:
- compatible : Shall be "apm,xgene-pmu" for revision 1 or
"apm,xgene-pmu-v2" for revision 2.
- regmap-csw : Regmap of the CPU switch fabric (CSW) resource.
- regmap-mcba : Regmap of the MCB-A (memory bridge) resource.
- regmap-mcbb : Regmap of the MCB-B (memory bridge) resource.
- reg : First resource shall be the CPU bus PMU resource.
- interrupts : Interrupt-specifier for PMU IRQ.
Required properties for L3C subnode:
- compatible : Shall be "apm,xgene-pmu-l3c".
- reg : First resource shall be the L3C PMU resource.
Required properties for IOB subnode:
- compatible : Shall be "apm,xgene-pmu-iob".
- reg : First resource shall be the IOB PMU resource.
Required properties for MCB subnode:
- compatible : Shall be "apm,xgene-pmu-mcb".
- reg : First resource shall be the MCB PMU resource.
- enable-bit-index : The bit indicates if the according MCB is enabled.
Required properties for MC subnode:
- compatible : Shall be "apm,xgene-pmu-mc".
- reg : First resource shall be the MC PMU resource.
- enable-bit-index : The bit indicates if the according MC is enabled.
Example:
csw: csw@7e200000 {
compatible = "apm,xgene-csw", "syscon";
reg = <0x0 0x7e200000 0x0 0x1000>;
};
mcba: mcba@7e700000 {
compatible = "apm,xgene-mcb", "syscon";
reg = <0x0 0x7e700000 0x0 0x1000>;
};
mcbb: mcbb@7e720000 {
compatible = "apm,xgene-mcb", "syscon";
reg = <0x0 0x7e720000 0x0 0x1000>;
};
pmu: pmu@78810000 {
compatible = "apm,xgene-pmu-v2";
#address-cells = <2>;
#size-cells = <2>;
ranges;
regmap-csw = <&csw>;
regmap-mcba = <&mcba>;
regmap-mcbb = <&mcbb>;
reg = <0x0 0x78810000 0x0 0x1000>;
interrupts = <0x0 0x22 0x4>;
pmul3c@7e610000 {
compatible = "apm,xgene-pmu-l3c";
reg = <0x0 0x7e610000 0x0 0x1000>;
};
pmuiob@7e940000 {
compatible = "apm,xgene-pmu-iob";
reg = <0x0 0x7e940000 0x0 0x1000>;
};
pmucmcb@7e710000 {
compatible = "apm,xgene-pmu-mcb";
reg = <0x0 0x7e710000 0x0 0x1000>;
enable-bit-index = <0>;
};
pmucmcb@7e730000 {
compatible = "apm,xgene-pmu-mcb";
reg = <0x0 0x7e730000 0x0 0x1000>;
enable-bit-index = <1>;
};
pmucmc@7e810000 {
compatible = "apm,xgene-pmu-mc";
reg = <0x0 0x7e810000 0x0 0x1000>;
enable-bit-index = <0>;
};
pmucmc@7e850000 {
compatible = "apm,xgene-pmu-mc";
reg = <0x0 0x7e850000 0x0 0x1000>;
enable-bit-index = <1>;
};
pmucmc@7e890000 {
compatible = "apm,xgene-pmu-mc";
reg = <0x0 0x7e890000 0x0 0x1000>;
enable-bit-index = <2>;
};
pmucmc@7e8d0000 {
compatible = "apm,xgene-pmu-mc";
reg = <0x0 0x7e8d0000 0x0 0x1000>;
enable-bit-index = <3>;
};
};