- New board support: i.MX8MQ based Thor96 board, Google i.MX8MQ Phanbell board, LX2160A based Solidrun Clearfog CX and Honeycomb boards. - Add eLCDIF controller and missing SAI nodes for i.MX8MQ SoC. - Add Crypto CAAM support for i.MX8MM and i.MX8MN. - Drop unneeded "simple-bus" from anatop node on i.MX8MM and i.MX8MN. - Drop unused/undocumented "fsl,aips-bus" and "fsl,imx8mq-aips-bus" compatibles from i.MX8M SoCs. - Add DDR controller nodes for i.MX8M devices. - Add EEPROM description for imx8mq-hummingboard-pulse and imx8mq-sr-som boards. - Enable USB1 and TypeC support for imx8mn-evk board. - Add FlexSPI and QSPI support for a few Layerscape SoCs and boards. - Add External MDIO1 node and the two RGMII PHYs connected on LX2160A. - Add missing SAI devices and set SAIs into async mode on LS1028A. - Other random device additions and enhancement for various platforms. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl4b4EYUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM6Iwwf/ZqkWN7e4Am8MFMbw4aJ4WLMes1M5 pHWEl/vxLmOdrzY45pyLjxarkXlzEE/Q4iS0/k9g4FSjj2BCOzFjlJAskTPGF7Jh YL02N32xPpsWHxJ04wX+VqZYrNkPH3ywpfgfOQzW9JWIs/Jz0PGB65SuniuHuhdr Y1twDz1sVLVdMpp6dlfPtMFxRMydvjkvlXrk7HzFuyGbxeJnGzhWa4rUlVcQoKwm +v/Hcn7B2CQgBzFgRQJUXEPntWFVPSB7c1nlx3iH4HHwGi14k5QbAfn6xBLyOwXQ QN3MCpY4n2ankaJ5D3zBQ5kCt17EOGUOLaW4VC5RpSUKhafSZV4din8cWA== =JSDg -----END PGP SIGNATURE----- Merge tag 'imx-dt64-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree update for 5.6: - New board support: i.MX8MQ based Thor96 board, Google i.MX8MQ Phanbell board, LX2160A based Solidrun Clearfog CX and Honeycomb boards. - Add eLCDIF controller and missing SAI nodes for i.MX8MQ SoC. - Add Crypto CAAM support for i.MX8MM and i.MX8MN. - Drop unneeded "simple-bus" from anatop node on i.MX8MM and i.MX8MN. - Drop unused/undocumented "fsl,aips-bus" and "fsl,imx8mq-aips-bus" compatibles from i.MX8M SoCs. - Add DDR controller nodes for i.MX8M devices. - Add EEPROM description for imx8mq-hummingboard-pulse and imx8mq-sr-som boards. - Enable USB1 and TypeC support for imx8mn-evk board. - Add FlexSPI and QSPI support for a few Layerscape SoCs and boards. - Add External MDIO1 node and the two RGMII PHYs connected on LX2160A. - Add missing SAI devices and set SAIs into async mode on LS1028A. - Other random device additions and enhancement for various platforms. * tag 'imx-dt64-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (35 commits) arm64: dts: imx8mn: Memory node should be in board DT arm64: dts: imx8mm: Memory node should be in board DT arm64: dts: imx8mn: add crypto node arm64: dts: imx8mq-hummingboard-pulse: add eeprom description arm64: dts: imx8mq-sr-som: add eeprom description arm64: dts: ls208xa: Update qspi node properties for LS2088ARDB arm64: dts: freescale: Add devicetree support for Thor96 board arm64: dts: imx8mq-librem5-devkit: add accelerometer and gyro sensor arm64: dts: imx8mm: Add Crypto CAAM support arm64: dts: freescale: add initial support for Google i.MX 8MQ Phanbell arm64: dts: ls1028a-rdb: enable emmc hs400 mode arm64: dts: ls1028a: Update edma compatible to fit eDMA driver arm64: dts: imx8m: drop "fsl,aips-bus" and "fsl,imx8mq-aips-bus" arm64: dts: imx8mm: Add missing mux options for UART1 and UART2 signals arm64: dts: lx2160a: add dts for CEX7 platforms arm64: dts: lx2160a: add emdio2 node arm64: dts: ls1028a: put SAIs into async mode arm64: dts: ls1028a: add missing sai nodes arm64: dts: imx8mn-evk: enable usb1 and typec support arm64: dts: imx8mn: Remove setting for IMX8MN_CLK_USB_CORE_REF ... Link: https://lore.kernel.org/r/20200113034006.17430-5-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net> |
||
---|---|---|
.. | ||
alpha | ||
arc | ||
arm | ||
arm64 | ||
c6x | ||
csky | ||
h8300 | ||
hexagon | ||
ia64 | ||
m68k | ||
microblaze | ||
mips | ||
nds32 | ||
nios2 | ||
openrisc | ||
parisc | ||
powerpc | ||
riscv | ||
s390 | ||
sh | ||
sparc | ||
um | ||
unicore32 | ||
x86 | ||
xtensa | ||
.gitignore | ||
Kconfig |