WSL2-Linux-Kernel/Documentation/w1/w1.generic

20 строки
1.0 KiB
Plaintext

Any w1 device must be connected to w1 bus master device - for example
ds9490 usb device or w1-over-GPIO or RS232 converter.
Driver for w1 bus master must provide several functions(you can find
them in struct w1_bus_master definition in w1.h) which then will be
called by w1 core to send various commands over w1 bus(by default it is
reset and search commands). When some device is found on the bus, w1 core
checks if driver for it's family is loaded.
If driver is loaded w1 core creates new w1_slave object and registers it
in the system(creates some generic sysfs files(struct w1_family_ops in
w1_family.h), notifies any registered listener and so on...).
It is device driver's business to provide any communication method
upstream.
For example w1_therm driver(ds18?20 thermal sensor family driver)
provides temperature reading function which is bound to ->rbin() method
of the above w1_family_ops structure.
w1_smem - driver for simple 64bit memory cell provides ID reading
method.
You can call above methods by reading appropriate sysfs files.