830 строки
20 KiB
C
830 строки
20 KiB
C
/*
|
|
* OmniVision OV96xx Camera Driver
|
|
*
|
|
* Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
|
|
*
|
|
* Based on ov772x camera driver:
|
|
*
|
|
* Copyright (C) 2008 Renesas Solutions Corp.
|
|
* Kuninori Morimoto <morimoto.kuninori@renesas.com>
|
|
*
|
|
* Based on ov7670 and soc_camera_platform driver,
|
|
*
|
|
* Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
|
|
* Copyright (C) 2008 Magnus Damm
|
|
* Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/videodev2.h>
|
|
#include <media/v4l2-chip-ident.h>
|
|
#include <media/v4l2-common.h>
|
|
#include <media/soc_camera.h>
|
|
|
|
#include "ov9640.h"
|
|
|
|
#define to_ov9640_sensor(sd) container_of(sd, struct ov9640_priv, subdev)
|
|
|
|
/* default register setup */
|
|
static const struct ov9640_reg ov9640_regs_dflt[] = {
|
|
{ OV9640_COM5, OV9640_COM5_SYSCLK | OV9640_COM5_LONGEXP },
|
|
{ OV9640_COM6, OV9640_COM6_OPT_BLC | OV9640_COM6_ADBLC_BIAS |
|
|
OV9640_COM6_FMT_RST | OV9640_COM6_ADBLC_OPTEN },
|
|
{ OV9640_PSHFT, OV9640_PSHFT_VAL(0x01) },
|
|
{ OV9640_ACOM, OV9640_ACOM_2X_ANALOG | OV9640_ACOM_RSVD },
|
|
{ OV9640_TSLB, OV9640_TSLB_YUYV_UYVY },
|
|
{ OV9640_COM16, OV9640_COM16_RB_AVG },
|
|
|
|
/* Gamma curve P */
|
|
{ 0x6c, 0x40 }, { 0x6d, 0x30 }, { 0x6e, 0x4b }, { 0x6f, 0x60 },
|
|
{ 0x70, 0x70 }, { 0x71, 0x70 }, { 0x72, 0x70 }, { 0x73, 0x70 },
|
|
{ 0x74, 0x60 }, { 0x75, 0x60 }, { 0x76, 0x50 }, { 0x77, 0x48 },
|
|
{ 0x78, 0x3a }, { 0x79, 0x2e }, { 0x7a, 0x28 }, { 0x7b, 0x22 },
|
|
|
|
/* Gamma curve T */
|
|
{ 0x7c, 0x04 }, { 0x7d, 0x07 }, { 0x7e, 0x10 }, { 0x7f, 0x28 },
|
|
{ 0x80, 0x36 }, { 0x81, 0x44 }, { 0x82, 0x52 }, { 0x83, 0x60 },
|
|
{ 0x84, 0x6c }, { 0x85, 0x78 }, { 0x86, 0x8c }, { 0x87, 0x9e },
|
|
{ 0x88, 0xbb }, { 0x89, 0xd2 }, { 0x8a, 0xe6 },
|
|
};
|
|
|
|
/* Configurations
|
|
* NOTE: for YUV, alter the following registers:
|
|
* COM12 |= OV9640_COM12_YUV_AVG
|
|
*
|
|
* for RGB, alter the following registers:
|
|
* COM7 |= OV9640_COM7_RGB
|
|
* COM13 |= OV9640_COM13_RGB_AVG
|
|
* COM15 |= proper RGB color encoding mode
|
|
*/
|
|
static const struct ov9640_reg ov9640_regs_qqcif[] = {
|
|
{ OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x0f) },
|
|
{ OV9640_COM1, OV9640_COM1_QQFMT | OV9640_COM1_HREF_2SKIP },
|
|
{ OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD },
|
|
{ OV9640_COM7, OV9640_COM7_QCIF },
|
|
{ OV9640_COM12, OV9640_COM12_RSVD },
|
|
{ OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
|
|
{ OV9640_COM15, OV9640_COM15_OR_10F0 },
|
|
};
|
|
|
|
static const struct ov9640_reg ov9640_regs_qqvga[] = {
|
|
{ OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x07) },
|
|
{ OV9640_COM1, OV9640_COM1_QQFMT | OV9640_COM1_HREF_2SKIP },
|
|
{ OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD },
|
|
{ OV9640_COM7, OV9640_COM7_QVGA },
|
|
{ OV9640_COM12, OV9640_COM12_RSVD },
|
|
{ OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
|
|
{ OV9640_COM15, OV9640_COM15_OR_10F0 },
|
|
};
|
|
|
|
static const struct ov9640_reg ov9640_regs_qcif[] = {
|
|
{ OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x07) },
|
|
{ OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD },
|
|
{ OV9640_COM7, OV9640_COM7_QCIF },
|
|
{ OV9640_COM12, OV9640_COM12_RSVD },
|
|
{ OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
|
|
{ OV9640_COM15, OV9640_COM15_OR_10F0 },
|
|
};
|
|
|
|
static const struct ov9640_reg ov9640_regs_qvga[] = {
|
|
{ OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x03) },
|
|
{ OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD },
|
|
{ OV9640_COM7, OV9640_COM7_QVGA },
|
|
{ OV9640_COM12, OV9640_COM12_RSVD },
|
|
{ OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
|
|
{ OV9640_COM15, OV9640_COM15_OR_10F0 },
|
|
};
|
|
|
|
static const struct ov9640_reg ov9640_regs_cif[] = {
|
|
{ OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x03) },
|
|
{ OV9640_COM3, OV9640_COM3_VP },
|
|
{ OV9640_COM7, OV9640_COM7_CIF },
|
|
{ OV9640_COM12, OV9640_COM12_RSVD },
|
|
{ OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
|
|
{ OV9640_COM15, OV9640_COM15_OR_10F0 },
|
|
};
|
|
|
|
static const struct ov9640_reg ov9640_regs_vga[] = {
|
|
{ OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x01) },
|
|
{ OV9640_COM3, OV9640_COM3_VP },
|
|
{ OV9640_COM7, OV9640_COM7_VGA },
|
|
{ OV9640_COM12, OV9640_COM12_RSVD },
|
|
{ OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
|
|
{ OV9640_COM15, OV9640_COM15_OR_10F0 },
|
|
};
|
|
|
|
static const struct ov9640_reg ov9640_regs_sxga[] = {
|
|
{ OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x01) },
|
|
{ OV9640_COM3, OV9640_COM3_VP },
|
|
{ OV9640_COM7, 0 },
|
|
{ OV9640_COM12, OV9640_COM12_RSVD },
|
|
{ OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
|
|
{ OV9640_COM15, OV9640_COM15_OR_10F0 },
|
|
};
|
|
|
|
static const struct ov9640_reg ov9640_regs_yuv[] = {
|
|
{ OV9640_MTX1, 0x58 },
|
|
{ OV9640_MTX2, 0x48 },
|
|
{ OV9640_MTX3, 0x10 },
|
|
{ OV9640_MTX4, 0x28 },
|
|
{ OV9640_MTX5, 0x48 },
|
|
{ OV9640_MTX6, 0x70 },
|
|
{ OV9640_MTX7, 0x40 },
|
|
{ OV9640_MTX8, 0x40 },
|
|
{ OV9640_MTX9, 0x40 },
|
|
{ OV9640_MTXS, 0x0f },
|
|
};
|
|
|
|
static const struct ov9640_reg ov9640_regs_rgb[] = {
|
|
{ OV9640_MTX1, 0x71 },
|
|
{ OV9640_MTX2, 0x3e },
|
|
{ OV9640_MTX3, 0x0c },
|
|
{ OV9640_MTX4, 0x33 },
|
|
{ OV9640_MTX5, 0x72 },
|
|
{ OV9640_MTX6, 0x00 },
|
|
{ OV9640_MTX7, 0x2b },
|
|
{ OV9640_MTX8, 0x66 },
|
|
{ OV9640_MTX9, 0xd2 },
|
|
{ OV9640_MTXS, 0x65 },
|
|
};
|
|
|
|
static enum v4l2_mbus_pixelcode ov9640_codes[] = {
|
|
V4L2_MBUS_FMT_UYVY8_2X8,
|
|
V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE,
|
|
V4L2_MBUS_FMT_RGB565_2X8_LE,
|
|
};
|
|
|
|
static const struct v4l2_queryctrl ov9640_controls[] = {
|
|
{
|
|
.id = V4L2_CID_VFLIP,
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.name = "Flip Vertically",
|
|
.minimum = 0,
|
|
.maximum = 1,
|
|
.step = 1,
|
|
.default_value = 0,
|
|
},
|
|
{
|
|
.id = V4L2_CID_HFLIP,
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.name = "Flip Horizontally",
|
|
.minimum = 0,
|
|
.maximum = 1,
|
|
.step = 1,
|
|
.default_value = 0,
|
|
},
|
|
};
|
|
|
|
/* read a register */
|
|
static int ov9640_reg_read(struct i2c_client *client, u8 reg, u8 *val)
|
|
{
|
|
int ret;
|
|
u8 data = reg;
|
|
struct i2c_msg msg = {
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = 1,
|
|
.buf = &data,
|
|
};
|
|
|
|
ret = i2c_transfer(client->adapter, &msg, 1);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
msg.flags = I2C_M_RD;
|
|
ret = i2c_transfer(client->adapter, &msg, 1);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
*val = data;
|
|
return 0;
|
|
|
|
err:
|
|
dev_err(&client->dev, "Failed reading register 0x%02x!\n", reg);
|
|
return ret;
|
|
}
|
|
|
|
/* write a register */
|
|
static int ov9640_reg_write(struct i2c_client *client, u8 reg, u8 val)
|
|
{
|
|
int ret;
|
|
u8 _val;
|
|
unsigned char data[2] = { reg, val };
|
|
struct i2c_msg msg = {
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = 2,
|
|
.buf = data,
|
|
};
|
|
|
|
ret = i2c_transfer(client->adapter, &msg, 1);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Failed writing register 0x%02x!\n", reg);
|
|
return ret;
|
|
}
|
|
|
|
/* we have to read the register back ... no idea why, maybe HW bug */
|
|
ret = ov9640_reg_read(client, reg, &_val);
|
|
if (ret)
|
|
dev_err(&client->dev,
|
|
"Failed reading back register 0x%02x!\n", reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Read a register, alter its bits, write it back */
|
|
static int ov9640_reg_rmw(struct i2c_client *client, u8 reg, u8 set, u8 unset)
|
|
{
|
|
u8 val;
|
|
int ret;
|
|
|
|
ret = ov9640_reg_read(client, reg, &val);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"[Read]-Modify-Write of register %02x failed!\n", reg);
|
|
return val;
|
|
}
|
|
|
|
val |= set;
|
|
val &= ~unset;
|
|
|
|
ret = ov9640_reg_write(client, reg, val);
|
|
if (ret)
|
|
dev_err(&client->dev,
|
|
"Read-Modify-[Write] of register %02x failed!\n", reg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Soft reset the camera. This has nothing to do with the RESET pin! */
|
|
static int ov9640_reset(struct i2c_client *client)
|
|
{
|
|
int ret;
|
|
|
|
ret = ov9640_reg_write(client, OV9640_COM7, OV9640_COM7_SCCB_RESET);
|
|
if (ret)
|
|
dev_err(&client->dev,
|
|
"An error occurred while entering soft reset!\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Start/Stop streaming from the device */
|
|
static int ov9640_s_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* Alter bus settings on camera side */
|
|
static int ov9640_set_bus_param(struct soc_camera_device *icd,
|
|
unsigned long flags)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* Request bus settings on camera side */
|
|
static unsigned long ov9640_query_bus_param(struct soc_camera_device *icd)
|
|
{
|
|
struct soc_camera_link *icl = to_soc_camera_link(icd);
|
|
|
|
/*
|
|
* REVISIT: the camera probably can do 10 bit transfers, but I don't
|
|
* have those pins connected on my hardware.
|
|
*/
|
|
unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
|
|
SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
|
|
SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8;
|
|
|
|
return soc_camera_apply_sensor_flags(icl, flags);
|
|
}
|
|
|
|
/* Get status of additional camera capabilities */
|
|
static int ov9640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
|
|
{
|
|
struct ov9640_priv *priv = to_ov9640_sensor(sd);
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_VFLIP:
|
|
ctrl->value = priv->flag_vflip;
|
|
break;
|
|
case V4L2_CID_HFLIP:
|
|
ctrl->value = priv->flag_hflip;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Set status of additional camera capabilities */
|
|
static int ov9640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct ov9640_priv *priv = to_ov9640_sensor(sd);
|
|
|
|
int ret = 0;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_VFLIP:
|
|
priv->flag_vflip = ctrl->value;
|
|
if (ctrl->value)
|
|
ret = ov9640_reg_rmw(client, OV9640_MVFP,
|
|
OV9640_MVFP_V, 0);
|
|
else
|
|
ret = ov9640_reg_rmw(client, OV9640_MVFP,
|
|
0, OV9640_MVFP_V);
|
|
break;
|
|
case V4L2_CID_HFLIP:
|
|
priv->flag_hflip = ctrl->value;
|
|
if (ctrl->value)
|
|
ret = ov9640_reg_rmw(client, OV9640_MVFP,
|
|
OV9640_MVFP_H, 0);
|
|
else
|
|
ret = ov9640_reg_rmw(client, OV9640_MVFP,
|
|
0, OV9640_MVFP_H);
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Get chip identification */
|
|
static int ov9640_g_chip_ident(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_chip_ident *id)
|
|
{
|
|
struct ov9640_priv *priv = to_ov9640_sensor(sd);
|
|
|
|
id->ident = priv->model;
|
|
id->revision = priv->revision;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static int ov9640_get_register(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
int ret;
|
|
u8 val;
|
|
|
|
if (reg->reg & ~0xff)
|
|
return -EINVAL;
|
|
|
|
reg->size = 1;
|
|
|
|
ret = ov9640_reg_read(client, reg->reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
reg->val = (__u64)val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov9640_set_register(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
if (reg->reg & ~0xff || reg->val & ~0xff)
|
|
return -EINVAL;
|
|
|
|
return ov9640_reg_write(client, reg->reg, reg->val);
|
|
}
|
|
#endif
|
|
|
|
/* select nearest higher resolution for capture */
|
|
static void ov9640_res_roundup(u32 *width, u32 *height)
|
|
{
|
|
int i;
|
|
enum { QQCIF, QQVGA, QCIF, QVGA, CIF, VGA, SXGA };
|
|
int res_x[] = { 88, 160, 176, 320, 352, 640, 1280 };
|
|
int res_y[] = { 72, 120, 144, 240, 288, 480, 960 };
|
|
|
|
for (i = 0; i < ARRAY_SIZE(res_x); i++) {
|
|
if (res_x[i] >= *width && res_y[i] >= *height) {
|
|
*width = res_x[i];
|
|
*height = res_y[i];
|
|
return;
|
|
}
|
|
}
|
|
|
|
*width = res_x[SXGA];
|
|
*height = res_y[SXGA];
|
|
}
|
|
|
|
/* Prepare necessary register changes depending on color encoding */
|
|
static void ov9640_alter_regs(enum v4l2_mbus_pixelcode code,
|
|
struct ov9640_reg_alt *alt)
|
|
{
|
|
switch (code) {
|
|
default:
|
|
case V4L2_MBUS_FMT_UYVY8_2X8:
|
|
alt->com12 = OV9640_COM12_YUV_AVG;
|
|
alt->com13 = OV9640_COM13_Y_DELAY_EN |
|
|
OV9640_COM13_YUV_DLY(0x01);
|
|
break;
|
|
case V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE:
|
|
alt->com7 = OV9640_COM7_RGB;
|
|
alt->com13 = OV9640_COM13_RGB_AVG;
|
|
alt->com15 = OV9640_COM15_RGB_555;
|
|
break;
|
|
case V4L2_MBUS_FMT_RGB565_2X8_LE:
|
|
alt->com7 = OV9640_COM7_RGB;
|
|
alt->com13 = OV9640_COM13_RGB_AVG;
|
|
alt->com15 = OV9640_COM15_RGB_565;
|
|
break;
|
|
};
|
|
}
|
|
|
|
/* Setup registers according to resolution and color encoding */
|
|
static int ov9640_write_regs(struct i2c_client *client, u32 width,
|
|
enum v4l2_mbus_pixelcode code, struct ov9640_reg_alt *alts)
|
|
{
|
|
const struct ov9640_reg *ov9640_regs, *matrix_regs;
|
|
int ov9640_regs_len, matrix_regs_len;
|
|
int i, ret;
|
|
u8 val;
|
|
|
|
/* select register configuration for given resolution */
|
|
switch (width) {
|
|
case W_QQCIF:
|
|
ov9640_regs = ov9640_regs_qqcif;
|
|
ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qqcif);
|
|
break;
|
|
case W_QQVGA:
|
|
ov9640_regs = ov9640_regs_qqvga;
|
|
ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qqvga);
|
|
break;
|
|
case W_QCIF:
|
|
ov9640_regs = ov9640_regs_qcif;
|
|
ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qcif);
|
|
break;
|
|
case W_QVGA:
|
|
ov9640_regs = ov9640_regs_qvga;
|
|
ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qvga);
|
|
break;
|
|
case W_CIF:
|
|
ov9640_regs = ov9640_regs_cif;
|
|
ov9640_regs_len = ARRAY_SIZE(ov9640_regs_cif);
|
|
break;
|
|
case W_VGA:
|
|
ov9640_regs = ov9640_regs_vga;
|
|
ov9640_regs_len = ARRAY_SIZE(ov9640_regs_vga);
|
|
break;
|
|
case W_SXGA:
|
|
ov9640_regs = ov9640_regs_sxga;
|
|
ov9640_regs_len = ARRAY_SIZE(ov9640_regs_sxga);
|
|
break;
|
|
default:
|
|
dev_err(&client->dev, "Failed to select resolution!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* select color matrix configuration for given color encoding */
|
|
if (code == V4L2_MBUS_FMT_UYVY8_2X8) {
|
|
matrix_regs = ov9640_regs_yuv;
|
|
matrix_regs_len = ARRAY_SIZE(ov9640_regs_yuv);
|
|
} else {
|
|
matrix_regs = ov9640_regs_rgb;
|
|
matrix_regs_len = ARRAY_SIZE(ov9640_regs_rgb);
|
|
}
|
|
|
|
/* write register settings into the module */
|
|
for (i = 0; i < ov9640_regs_len; i++) {
|
|
val = ov9640_regs[i].val;
|
|
|
|
switch (ov9640_regs[i].reg) {
|
|
case OV9640_COM7:
|
|
val |= alts->com7;
|
|
break;
|
|
case OV9640_COM12:
|
|
val |= alts->com12;
|
|
break;
|
|
case OV9640_COM13:
|
|
val |= alts->com13;
|
|
break;
|
|
case OV9640_COM15:
|
|
val |= alts->com15;
|
|
break;
|
|
}
|
|
|
|
ret = ov9640_reg_write(client, ov9640_regs[i].reg, val);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* write color matrix configuration into the module */
|
|
for (i = 0; i < matrix_regs_len; i++) {
|
|
ret = ov9640_reg_write(client, matrix_regs[i].reg,
|
|
matrix_regs[i].val);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* program default register values */
|
|
static int ov9640_prog_dflt(struct i2c_client *client)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ov9640_regs_dflt); i++) {
|
|
ret = ov9640_reg_write(client, ov9640_regs_dflt[i].reg,
|
|
ov9640_regs_dflt[i].val);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* wait for the changes to actually happen, 140ms are not enough yet */
|
|
mdelay(150);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* set the format we will capture in */
|
|
static int ov9640_s_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *mf)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct ov9640_reg_alt alts = {0};
|
|
enum v4l2_colorspace cspace;
|
|
enum v4l2_mbus_pixelcode code = mf->code;
|
|
int ret;
|
|
|
|
ov9640_res_roundup(&mf->width, &mf->height);
|
|
ov9640_alter_regs(mf->code, &alts);
|
|
|
|
ov9640_reset(client);
|
|
|
|
ret = ov9640_prog_dflt(client);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (code) {
|
|
case V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE:
|
|
case V4L2_MBUS_FMT_RGB565_2X8_LE:
|
|
cspace = V4L2_COLORSPACE_SRGB;
|
|
break;
|
|
default:
|
|
code = V4L2_MBUS_FMT_UYVY8_2X8;
|
|
case V4L2_MBUS_FMT_UYVY8_2X8:
|
|
cspace = V4L2_COLORSPACE_JPEG;
|
|
}
|
|
|
|
ret = ov9640_write_regs(client, mf->width, code, &alts);
|
|
if (!ret) {
|
|
mf->code = code;
|
|
mf->colorspace = cspace;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov9640_try_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *mf)
|
|
{
|
|
ov9640_res_roundup(&mf->width, &mf->height);
|
|
|
|
mf->field = V4L2_FIELD_NONE;
|
|
|
|
switch (mf->code) {
|
|
case V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE:
|
|
case V4L2_MBUS_FMT_RGB565_2X8_LE:
|
|
mf->colorspace = V4L2_COLORSPACE_SRGB;
|
|
break;
|
|
default:
|
|
mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
|
|
case V4L2_MBUS_FMT_UYVY8_2X8:
|
|
mf->colorspace = V4L2_COLORSPACE_JPEG;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov9640_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
|
|
enum v4l2_mbus_pixelcode *code)
|
|
{
|
|
if (index >= ARRAY_SIZE(ov9640_codes))
|
|
return -EINVAL;
|
|
|
|
*code = ov9640_codes[index];
|
|
return 0;
|
|
}
|
|
|
|
static int ov9640_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
|
|
{
|
|
a->c.left = 0;
|
|
a->c.top = 0;
|
|
a->c.width = W_SXGA;
|
|
a->c.height = H_SXGA;
|
|
a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov9640_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
|
|
{
|
|
a->bounds.left = 0;
|
|
a->bounds.top = 0;
|
|
a->bounds.width = W_SXGA;
|
|
a->bounds.height = H_SXGA;
|
|
a->defrect = a->bounds;
|
|
a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
|
|
a->pixelaspect.numerator = 1;
|
|
a->pixelaspect.denominator = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
static int ov9640_video_probe(struct soc_camera_device *icd,
|
|
struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct ov9640_priv *priv = to_ov9640_sensor(sd);
|
|
u8 pid, ver, midh, midl;
|
|
const char *devname;
|
|
int ret = 0;
|
|
|
|
/*
|
|
* We must have a parent by now. And it cannot be a wrong one.
|
|
* So this entire test is completely redundant.
|
|
*/
|
|
if (!icd->dev.parent ||
|
|
to_soc_camera_host(icd->dev.parent)->nr != icd->iface) {
|
|
dev_err(&client->dev, "Parent missing or invalid!\n");
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
/*
|
|
* check and show product ID and manufacturer ID
|
|
*/
|
|
|
|
ret = ov9640_reg_read(client, OV9640_PID, &pid);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = ov9640_reg_read(client, OV9640_VER, &ver);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = ov9640_reg_read(client, OV9640_MIDH, &midh);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = ov9640_reg_read(client, OV9640_MIDL, &midl);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch (VERSION(pid, ver)) {
|
|
case OV9640_V2:
|
|
devname = "ov9640";
|
|
priv->model = V4L2_IDENT_OV9640;
|
|
priv->revision = 2;
|
|
case OV9640_V3:
|
|
devname = "ov9640";
|
|
priv->model = V4L2_IDENT_OV9640;
|
|
priv->revision = 3;
|
|
break;
|
|
default:
|
|
dev_err(&client->dev, "Product ID error %x:%x\n", pid, ver);
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
dev_info(&client->dev, "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
|
|
devname, pid, ver, midh, midl);
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static struct soc_camera_ops ov9640_ops = {
|
|
.set_bus_param = ov9640_set_bus_param,
|
|
.query_bus_param = ov9640_query_bus_param,
|
|
.controls = ov9640_controls,
|
|
.num_controls = ARRAY_SIZE(ov9640_controls),
|
|
};
|
|
|
|
static struct v4l2_subdev_core_ops ov9640_core_ops = {
|
|
.g_ctrl = ov9640_g_ctrl,
|
|
.s_ctrl = ov9640_s_ctrl,
|
|
.g_chip_ident = ov9640_g_chip_ident,
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
.g_register = ov9640_get_register,
|
|
.s_register = ov9640_set_register,
|
|
#endif
|
|
|
|
};
|
|
|
|
static struct v4l2_subdev_video_ops ov9640_video_ops = {
|
|
.s_stream = ov9640_s_stream,
|
|
.s_mbus_fmt = ov9640_s_fmt,
|
|
.try_mbus_fmt = ov9640_try_fmt,
|
|
.enum_mbus_fmt = ov9640_enum_fmt,
|
|
.cropcap = ov9640_cropcap,
|
|
.g_crop = ov9640_g_crop,
|
|
|
|
};
|
|
|
|
static struct v4l2_subdev_ops ov9640_subdev_ops = {
|
|
.core = &ov9640_core_ops,
|
|
.video = &ov9640_video_ops,
|
|
};
|
|
|
|
/*
|
|
* i2c_driver function
|
|
*/
|
|
static int ov9640_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *did)
|
|
{
|
|
struct ov9640_priv *priv;
|
|
struct soc_camera_device *icd = client->dev.platform_data;
|
|
struct soc_camera_link *icl;
|
|
int ret;
|
|
|
|
if (!icd) {
|
|
dev_err(&client->dev, "Missing soc-camera data!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
icl = to_soc_camera_link(icd);
|
|
if (!icl) {
|
|
dev_err(&client->dev, "Missing platform_data for driver\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv = kzalloc(sizeof(struct ov9640_priv), GFP_KERNEL);
|
|
if (!priv) {
|
|
dev_err(&client->dev,
|
|
"Failed to allocate memory for private data!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
v4l2_i2c_subdev_init(&priv->subdev, client, &ov9640_subdev_ops);
|
|
|
|
icd->ops = &ov9640_ops;
|
|
|
|
ret = ov9640_video_probe(icd, client);
|
|
|
|
if (ret) {
|
|
icd->ops = NULL;
|
|
kfree(priv);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov9640_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct ov9640_priv *priv = to_ov9640_sensor(sd);
|
|
|
|
kfree(priv);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id ov9640_id[] = {
|
|
{ "ov9640", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ov9640_id);
|
|
|
|
static struct i2c_driver ov9640_i2c_driver = {
|
|
.driver = {
|
|
.name = "ov9640",
|
|
},
|
|
.probe = ov9640_probe,
|
|
.remove = ov9640_remove,
|
|
.id_table = ov9640_id,
|
|
};
|
|
|
|
static int __init ov9640_module_init(void)
|
|
{
|
|
return i2c_add_driver(&ov9640_i2c_driver);
|
|
}
|
|
|
|
static void __exit ov9640_module_exit(void)
|
|
{
|
|
i2c_del_driver(&ov9640_i2c_driver);
|
|
}
|
|
|
|
module_init(ov9640_module_init);
|
|
module_exit(ov9640_module_exit);
|
|
|
|
MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV96xx");
|
|
MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
|
|
MODULE_LICENSE("GPL v2");
|