WSL2-Linux-Kernel/arch/powerpc/boot/dts/c293pcie.dts

225 строки
5.3 KiB
Plaintext

/*
* C293 PCIE Device Tree Source
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/c293si-pre.dtsi"
/ {
model = "fsl,C293PCIE";
compatible = "fsl,C293PCIE";
memory {
device_type = "memory";
};
ifc: ifc@fffe1e000 {
reg = <0xf 0xffe1e000 0 0x2000>;
ranges = <0x0 0x0 0xf 0xec000000 0x04000000
0x1 0x0 0xf 0xff800000 0x00010000
0x2 0x0 0xf 0xffdf0000 0x00010000>;
};
soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
};
pci0: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
&ifc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x4000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
/* 1MB for DTB Image */
reg = <0x0 0x00100000>;
label = "NOR DTB Image";
};
partition@100000 {
/* 8 MB for Linux Kernel Image */
reg = <0x00100000 0x00800000>;
label = "NOR Linux Kernel Image";
};
partition@900000 {
/* 53MB for rootfs */
reg = <0x00900000 0x03500000>;
label = "NOR Rootfs Image";
};
partition@3e00000 {
/* 1MB for blob encrypted key */
reg = <0x03e00000 0x00100000>;
label = "NOR blob encrypted key";
};
partition@3f00000 {
/* 512KB for u-boot Bootloader Image and evn */
reg = <0x03f00000 0x00100000>;
label = "NOR U-Boot Image";
read-only;
};
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x1 0x0 0x10000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND DTB Image";
};
partition@200000 {
/* 16MB for Linux Kernel Image */
reg = <0x00200000 0x01000000>;
label = "NAND Linux Kernel Image";
};
partition@1200000 {
/* 4078MB for Root file System Image */
reg = <0x00600000 0xfee00000>;
label = "NAND RFS Image";
};
};
cpld@2,0 {
compatible = "fsl,c293pcie-cpld";
reg = <0x2 0x0 0x20>;
};
};
&soc {
i2c@3000 {
eeprom@50 {
compatible = "st,24c1024";
reg = <0x50>;
};
adt7461@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <50000000>;
partition@0 {
/* 1MB for u-boot Bootloader Image */
/* 1MB for Environment */
reg = <0x0 0x00100000>;
label = "SPI Flash U-Boot Image";
read-only;
};
partition@100000 {
/* 512KB for DTB Image */
reg = <0x00100000 0x00080000>;
label = "SPI Flash DTB Image";
};
partition@180000 {
/* 4MB for Linux Kernel Image */
reg = <0x00180000 0x00400000>;
label = "SPI Flash Linux Kernel Image";
};
partition@580000 {
/* 10.5MB for RFS Image */
reg = <0x00580000 0x00a80000>;
label = "SPI Flash RFS Image";
};
};
};
mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <2 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupts = <2 1 0 0>;
reg = <0x2>;
};
};
enet0: ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
enet1: ethernet@b1000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
};
/include/ "fsl/c293si-post.dtsi"