WSL2-Linux-Kernel/arch/mips/pci/pci-ddb5476.c

94 строки
2.1 KiB
C

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/debug.h>
#include <asm/ddb5xxx/ddb5xxx.h>
static struct resource extpci_io_resource = {
"pci IO space",
0x1000, /* leave some room for ISA bus */
DDB_PCI_IO_SIZE - 1,
IORESOURCE_IO
};
static struct resource extpci_mem_resource = {
"pci memory space",
DDB_PCI_MEM_BASE + 0x00100000, /* leave 1 MB for RTC */
DDB_PCI_MEM_BASE + DDB_PCI_MEM_SIZE - 1,
IORESOURCE_MEM
};
extern struct pci_ops ddb5476_ext_pci_ops;
struct pci_controller ddb5476_controller = {
.pci_ops = &ddb5476_ext_pci_ops,
.io_resource = &extpci_io_resource,
.mem_resource = &extpci_mem_resource
};
/*
* we fix up irqs based on the slot number.
* The first entry is at AD:11.
*
* This does not work for devices on sub-buses yet.
*/
/*
* temporary
*/
#define PCI_EXT_INTA 8
#define PCI_EXT_INTB 9
#define PCI_EXT_INTC 10
#define PCI_EXT_INTD 11
#define PCI_EXT_INTE 12
/*
* based on ddb5477 manual page 11
*/
#define MAX_SLOT_NUM 21
static unsigned char irq_map[MAX_SLOT_NUM] = {
[ 2] = 9, /* AD:13 USB */
[ 3] = 10, /* AD:14 PMU */
[ 5] = 0, /* AD:16 P2P bridge */
[ 6] = nile4_to_irq(PCI_EXT_INTB), /* AD:17 */
[ 7] = nile4_to_irq(PCI_EXT_INTC), /* AD:18 */
[ 8] = nile4_to_irq(PCI_EXT_INTD), /* AD:19 */
[ 9] = nile4_to_irq(PCI_EXT_INTA), /* AD:20 */
[13] = 14, /* AD:24 HD controller, M5229 */
};
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
return irq_map[slot];
}
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
void __init ddb_pci_reset_bus(void)
{
u32 temp;
/*
* I am not sure about the "official" procedure, the following
* steps work as far as I know:
* We first set PCI cold reset bit (bit 31) in PCICTRL-H.
* Then we clear the PCI warm reset bit (bit 30) to 0 in PCICTRL-H.
* The same is true for both PCI channels.
*/
temp = ddb_in32(DDB_PCICTRL + 4);
temp |= 0x80000000;
ddb_out32(DDB_PCICTRL + 4, temp);
temp &= ~0xc0000000;
ddb_out32(DDB_PCICTRL + 4, temp);
}