microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/usb/gadget/function/u_serial.c

1608 строки
39 KiB
C
Исходник Ответственный История

/*
* u_serial.c - utilities for USB gadget "serial port"/TTY support
*
* Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
* Copyright (C) 2008 David Brownell
* Copyright (C) 2008 by Nokia Corporation
*
* This code also borrows from usbserial.c, which is
* Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2000 Peter Berger (pberger@brimson.com)
* Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com)
*
* This software is distributed under the terms of the GNU General
* Public License ("GPL") as published by the Free Software Foundation,
* either version 2 of that License or (at your option) any later version.
*/
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/slab.h>
#include <linux/export.h>
#include <linux/module.h>
#include <linux/console.h>
#include <linux/kthread.h>
#include "u_serial.h"
/*
* This component encapsulates the TTY layer glue needed to provide basic
* "serial port" functionality through the USB gadget stack. Each such
* port is exposed through a /dev/ttyGS* node.
*
* After this module has been loaded, the individual TTY port can be requested
* (gserial_alloc_line()) and it will stay available until they are removed
* (gserial_free_line()). Each one may be connected to a USB function
* (gserial_connect), or disconnected (with gserial_disconnect) when the USB
* host issues a config change event. Data can only flow when the port is
* connected to the host.
*
* A given TTY port can be made available in multiple configurations.
* For example, each one might expose a ttyGS0 node which provides a
* login application. In one case that might use CDC ACM interface 0,
* while another configuration might use interface 3 for that. The
* work to handle that (including descriptor management) is not part
* of this component.
*
* Configurations may expose more than one TTY port. For example, if
* ttyGS0 provides login service, then ttyGS1 might provide dialer access
* for a telephone or fax link. And ttyGS2 might be something that just
* needs a simple byte stream interface for some messaging protocol that
* is managed in userspace ... OBEX, PTP, and MTP have been mentioned.
*
*
* gserial is the lifecycle interface, used by USB functions
* gs_port is the I/O nexus, used by the tty driver
* tty_struct links to the tty/filesystem framework
*
* gserial <---> gs_port ... links will be null when the USB link is
* inactive; managed by gserial_{connect,disconnect}(). each gserial
* instance can wrap its own USB control protocol.
* gserial->ioport == usb_ep->driver_data ... gs_port
* gs_port->port_usb ... gserial
*
* gs_port <---> tty_struct ... links will be null when the TTY file
* isn't opened; managed by gs_open()/gs_close()
* gserial->port_tty ... tty_struct
* tty_struct->driver_data ... gserial
*/
/* RX and TX queues can buffer QUEUE_SIZE packets before they hit the
* next layer of buffering. For TX that's a circular buffer; for RX
* consider it a NOP. A third layer is provided by the TTY code.
*/
#define QUEUE_SIZE 16
#define WRITE_BUF_SIZE 8192 /* TX only */
#define GS_CONSOLE_BUF_SIZE 8192
/* circular buffer */
struct gs_buf {
unsigned buf_size;
char *buf_buf;
char *buf_get;
char *buf_put;
};
/* console info */
struct gscons_info {
struct gs_port *port;
struct task_struct *console_thread;
struct gs_buf con_buf;
/* protect the buf and busy flag */
spinlock_t con_lock;
int req_busy;
struct usb_request *console_req;
};
/*
* The port structure holds info for each port, one for each minor number
* (and thus for each /dev/ node).
*/
struct gs_port {
struct tty_port port;
spinlock_t port_lock; /* guard port_* access */
struct gserial *port_usb;
bool openclose; /* open/close in progress */
u8 port_num;
struct list_head read_pool;
int read_started;
int read_allocated;
struct list_head read_queue;
unsigned n_read;
struct tasklet_struct push;
struct list_head write_pool;
int write_started;
int write_allocated;
struct gs_buf port_write_buf;
wait_queue_head_t drain_wait; /* wait while writes drain */
bool write_busy;
wait_queue_head_t close_wait;
/* REVISIT this state ... */
struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */
};
static struct portmaster {
struct mutex lock; /* protect open/close */
struct gs_port *port;
} ports[MAX_U_SERIAL_PORTS];
#define GS_CLOSE_TIMEOUT 15 /* seconds */
#ifdef VERBOSE_DEBUG
#ifndef pr_vdebug
#define pr_vdebug(fmt, arg...) \
pr_debug(fmt, ##arg)
#endif /* pr_vdebug */
#else
#ifndef pr_vdebug
#define pr_vdebug(fmt, arg...) \
({ if (0) pr_debug(fmt, ##arg); })
#endif /* pr_vdebug */
#endif
/*-------------------------------------------------------------------------*/
/* Circular Buffer */
/*
* gs_buf_alloc
*
* Allocate a circular buffer and all associated memory.
*/
static int gs_buf_alloc(struct gs_buf *gb, unsigned size)
{
gb->buf_buf = kmalloc(size, GFP_KERNEL);
if (gb->buf_buf == NULL)
return -ENOMEM;
gb->buf_size = size;
gb->buf_put = gb->buf_buf;
gb->buf_get = gb->buf_buf;
return 0;
}
/*
* gs_buf_free
*
* Free the buffer and all associated memory.
*/
static void gs_buf_free(struct gs_buf *gb)
{
kfree(gb->buf_buf);
gb->buf_buf = NULL;
}
/*
* gs_buf_clear
*
* Clear out all data in the circular buffer.
*/
static void gs_buf_clear(struct gs_buf *gb)
{
gb->buf_get = gb->buf_put;
/* equivalent to a get of all data available */
}
/*
* gs_buf_data_avail
*
* Return the number of bytes of data written into the circular
* buffer.
*/
static unsigned gs_buf_data_avail(struct gs_buf *gb)
{
return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size;
}
/*
* gs_buf_space_avail
*
* Return the number of bytes of space available in the circular
* buffer.
*/
static unsigned gs_buf_space_avail(struct gs_buf *gb)
{
return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size;
}
/*
* gs_buf_put
*
* Copy data data from a user buffer and put it into the circular buffer.
* Restrict to the amount of space available.
*
* Return the number of bytes copied.
*/
static unsigned
gs_buf_put(struct gs_buf *gb, const char *buf, unsigned count)
{
unsigned len;
len = gs_buf_space_avail(gb);
if (count > len)
count = len;
if (count == 0)
return 0;
len = gb->buf_buf + gb->buf_size - gb->buf_put;
if (count > len) {
memcpy(gb->buf_put, buf, len);
memcpy(gb->buf_buf, buf+len, count - len);
gb->buf_put = gb->buf_buf + count - len;
} else {
memcpy(gb->buf_put, buf, count);
if (count < len)
gb->buf_put += count;
else /* count == len */
gb->buf_put = gb->buf_buf;
}
return count;
}
/*
* gs_buf_get
*
* Get data from the circular buffer and copy to the given buffer.
* Restrict to the amount of data available.
*
* Return the number of bytes copied.
*/
static unsigned
gs_buf_get(struct gs_buf *gb, char *buf, unsigned count)
{
unsigned len;
len = gs_buf_data_avail(gb);
if (count > len)
count = len;
if (count == 0)
return 0;
len = gb->buf_buf + gb->buf_size - gb->buf_get;
if (count > len) {
memcpy(buf, gb->buf_get, len);
memcpy(buf+len, gb->buf_buf, count - len);
gb->buf_get = gb->buf_buf + count - len;
} else {
memcpy(buf, gb->buf_get, count);
if (count < len)
gb->buf_get += count;
else /* count == len */
gb->buf_get = gb->buf_buf;
}
return count;
}
/*-------------------------------------------------------------------------*/
/* I/O glue between TTY (upper) and USB function (lower) driver layers */
/*
* gs_alloc_req
*
* Allocate a usb_request and its buffer. Returns a pointer to the
* usb_request or NULL if there is an error.
*/
struct usb_request *
gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
{
struct usb_request *req;
req = usb_ep_alloc_request(ep, kmalloc_flags);
if (req != NULL) {
req->length = len;
req->buf = kmalloc(len, kmalloc_flags);
if (req->buf == NULL) {
usb_ep_free_request(ep, req);
return NULL;
}
}
return req;
}
EXPORT_SYMBOL_GPL(gs_alloc_req);
/*
* gs_free_req
*
* Free a usb_request and its buffer.
*/
void gs_free_req(struct usb_ep *ep, struct usb_request *req)
{
kfree(req->buf);
usb_ep_free_request(ep, req);
}
EXPORT_SYMBOL_GPL(gs_free_req);
/*
* gs_send_packet
*
* If there is data to send, a packet is built in the given
* buffer and the size is returned. If there is no data to
* send, 0 is returned.
*
* Called with port_lock held.
*/
static unsigned
gs_send_packet(struct gs_port *port, char *packet, unsigned size)
{
unsigned len;
len = gs_buf_data_avail(&port->port_write_buf);
if (len < size)
size = len;
if (size != 0)
size = gs_buf_get(&port->port_write_buf, packet, size);
return size;
}
/*
* gs_start_tx
*
* This function finds available write requests, calls
* gs_send_packet to fill these packets with data, and
* continues until either there are no more write requests
* available or no more data to send. This function is
* run whenever data arrives or write requests are available.
*
* Context: caller owns port_lock; port_usb is non-null.
*/
static int gs_start_tx(struct gs_port *port)
/*
__releases(&port->port_lock)
__acquires(&port->port_lock)
*/
{
struct list_head *pool = &port->write_pool;
struct usb_ep *in;
int status = 0;
bool do_tty_wake = false;
if (!port->port_usb)
return status;
in = port->port_usb->in;
while (!port->write_busy && !list_empty(pool)) {
struct usb_request *req;
int len;
if (port->write_started >= QUEUE_SIZE)
break;
req = list_entry(pool->next, struct usb_request, list);
len = gs_send_packet(port, req->buf, in->maxpacket);
if (len == 0) {
wake_up_interruptible(&port->drain_wait);
break;
}
do_tty_wake = true;
req->length = len;
list_del(&req->list);
req->zero = (gs_buf_data_avail(&port->port_write_buf) == 0);
pr_vdebug("ttyGS%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n",
port->port_num, len, *((u8 *)req->buf),
*((u8 *)req->buf+1), *((u8 *)req->buf+2));
/* Drop lock while we call out of driver; completions
* could be issued while we do so. Disconnection may
* happen too; maybe immediately before we queue this!
*
* NOTE that we may keep sending data for a while after
* the TTY closed (dev->ioport->port_tty is NULL).
*/
port->write_busy = true;
spin_unlock(&port->port_lock);
status = usb_ep_queue(in, req, GFP_ATOMIC);
spin_lock(&port->port_lock);
port->write_busy = false;
if (status) {
pr_debug("%s: %s %s err %d\n",
__func__, "queue", in->name, status);
list_add(&req->list, pool);
break;
}
port->write_started++;
/* abort immediately after disconnect */
if (!port->port_usb)
break;
}
if (do_tty_wake && port->port.tty)
tty_wakeup(port->port.tty);
return status;
}
/*
* Context: caller owns port_lock, and port_usb is set
*/
static unsigned gs_start_rx(struct gs_port *port)
/*
__releases(&port->port_lock)
__acquires(&port->port_lock)
*/
{
struct list_head *pool = &port->read_pool;
struct usb_ep *out = port->port_usb->out;
while (!list_empty(pool)) {
struct usb_request *req;
int status;
struct tty_struct *tty;
/* no more rx if closed */
tty = port->port.tty;
if (!tty)
break;
if (port->read_started >= QUEUE_SIZE)
break;
req = list_entry(pool->next, struct usb_request, list);
list_del(&req->list);
req->length = out->maxpacket;
/* drop lock while we call out; the controller driver
* may need to call us back (e.g. for disconnect)
*/
spin_unlock(&port->port_lock);
status = usb_ep_queue(out, req, GFP_ATOMIC);
spin_lock(&port->port_lock);
if (status) {
pr_debug("%s: %s %s err %d\n",
__func__, "queue", out->name, status);
list_add(&req->list, pool);
break;
}
port->read_started++;
/* abort immediately after disconnect */
if (!port->port_usb)
break;
}
return port->read_started;
}
/*
* RX tasklet takes data out of the RX queue and hands it up to the TTY
* layer until it refuses to take any more data (or is throttled back).
* Then it issues reads for any further data.
*
* If the RX queue becomes full enough that no usb_request is queued,
* the OUT endpoint may begin NAKing as soon as its FIFO fills up.
* So QUEUE_SIZE packets plus however many the FIFO holds (usually two)
* can be buffered before the TTY layer's buffers (currently 64 KB).
*/
static void gs_rx_push(unsigned long _port)
{
struct gs_port *port = (void *)_port;
struct tty_struct *tty;
struct list_head *queue = &port->read_queue;
bool disconnect = false;
bool do_push = false;
/* hand any queued data to the tty */
spin_lock_irq(&port->port_lock);
tty = port->port.tty;
while (!list_empty(queue)) {
struct usb_request *req;
req = list_first_entry(queue, struct usb_request, list);
/* leave data queued if tty was rx throttled */
if (tty && tty_throttled(tty))
break;
switch (req->status) {
case -ESHUTDOWN:
disconnect = true;
pr_vdebug("ttyGS%d: shutdown\n", port->port_num);
break;
default:
/* presumably a transient fault */
pr_warn("ttyGS%d: unexpected RX status %d\n",
port->port_num, req->status);
/* FALLTHROUGH */
case 0:
/* normal completion */
break;
}
/* push data to (open) tty */
if (req->actual && tty) {
char *packet = req->buf;
unsigned size = req->actual;
unsigned n;
int count;
/* we may have pushed part of this packet already... */
n = port->n_read;
if (n) {
packet += n;
size -= n;
}
count = tty_insert_flip_string(&port->port, packet,
size);
if (count)
do_push = true;
if (count != size) {
/* stop pushing; TTY layer can't handle more */
port->n_read += count;
pr_vdebug("ttyGS%d: rx block %d/%d\n",
port->port_num, count, req->actual);
break;
}
port->n_read = 0;
}
list_move(&req->list, &port->read_pool);
port->read_started--;
}
/* Push from tty to ldisc; this is handled by a workqueue,
* so we won't get callbacks and can hold port_lock
*/
if (do_push)
tty_flip_buffer_push(&port->port);
/* We want our data queue to become empty ASAP, keeping data
* in the tty and ldisc (not here). If we couldn't push any
* this time around, there may be trouble unless there's an
* implicit tty_unthrottle() call on its way...
*
* REVISIT we should probably add a timer to keep the tasklet
* from starving ... but it's not clear that case ever happens.
*/
if (!list_empty(queue) && tty) {
if (!tty_throttled(tty)) {
if (do_push)
tasklet_schedule(&port->push);
else
pr_warn("ttyGS%d: RX not scheduled?\n",
port->port_num);
}
}
/* If we're still connected, refill the USB RX queue. */
if (!disconnect && port->port_usb)
gs_start_rx(port);
spin_unlock_irq(&port->port_lock);
}
static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
{
struct gs_port *port = ep->driver_data;
/* Queue all received data until the tty layer is ready for it. */
spin_lock(&port->port_lock);
list_add_tail(&req->list, &port->read_queue);
tasklet_schedule(&port->push);
spin_unlock(&port->port_lock);
}
static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
{
struct gs_port *port = ep->driver_data;
spin_lock(&port->port_lock);
list_add(&req->list, &port->write_pool);
port->write_started--;
switch (req->status) {
default:
/* presumably a transient fault */
pr_warn("%s: unexpected %s status %d\n",
__func__, ep->name, req->status);
/* FALL THROUGH */
case 0:
/* normal completion */
gs_start_tx(port);
break;
case -ESHUTDOWN:
/* disconnect */
pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
break;
}
spin_unlock(&port->port_lock);
}
static void gs_free_requests(struct usb_ep *ep, struct list_head *head,
int *allocated)
{
struct usb_request *req;
while (!list_empty(head)) {
req = list_entry(head->next, struct usb_request, list);
list_del(&req->list);
gs_free_req(ep, req);
if (allocated)
(*allocated)--;
}
}
static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head,
void (*fn)(struct usb_ep *, struct usb_request *),
int *allocated)
{
int i;
struct usb_request *req;
int n = allocated ? QUEUE_SIZE - *allocated : QUEUE_SIZE;
/* Pre-allocate up to QUEUE_SIZE transfers, but if we can't
* do quite that many this time, don't fail ... we just won't
* be as speedy as we might otherwise be.
*/
for (i = 0; i < n; i++) {
req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
if (!req)
return list_empty(head) ? -ENOMEM : 0;
req->complete = fn;
list_add_tail(&req->list, head);
if (allocated)
(*allocated)++;
}
return 0;
}
/**
* gs_start_io - start USB I/O streams
* @dev: encapsulates endpoints to use
* Context: holding port_lock; port_tty and port_usb are non-null
*
* We only start I/O when something is connected to both sides of
* this port. If nothing is listening on the host side, we may
* be pointlessly filling up our TX buffers and FIFO.
*/
static int gs_start_io(struct gs_port *port)
{
struct list_head *head = &port->read_pool;
struct usb_ep *ep = port->port_usb->out;
int status;
unsigned started;
/* Allocate RX and TX I/O buffers. We can't easily do this much
* earlier (with GFP_KERNEL) because the requests are coupled to
* endpoints, as are the packet sizes we'll be using. Different
* configurations may use different endpoints with a given port;
* and high speed vs full speed changes packet sizes too.
*/
status = gs_alloc_requests(ep, head, gs_read_complete,
&port->read_allocated);
if (status)
return status;
status = gs_alloc_requests(port->port_usb->in, &port->write_pool,
gs_write_complete, &port->write_allocated);
if (status) {
gs_free_requests(ep, head, &port->read_allocated);
return status;
}
/* queue read requests */
port->n_read = 0;
started = gs_start_rx(port);
/* unblock any pending writes into our circular buffer */
if (started) {
tty_wakeup(port->port.tty);
} else {
gs_free_requests(ep, head, &port->read_allocated);
gs_free_requests(port->port_usb->in, &port->write_pool,
&port->write_allocated);
status = -EIO;
}
return status;
}
/*-------------------------------------------------------------------------*/
/* TTY Driver */
/*
* gs_open sets up the link between a gs_port and its associated TTY.
* That link is broken *only* by TTY close(), and all driver methods
* know that.
*/
static int gs_open(struct tty_struct *tty, struct file *file)
{
int port_num = tty->index;
struct gs_port *port;
int status;
do {
mutex_lock(&ports[port_num].lock);
port = ports[port_num].port;
if (!port)
status = -ENODEV;
else {
spin_lock_irq(&port->port_lock);
/* already open? Great. */
if (port->port.count) {
status = 0;
port->port.count++;
/* currently opening/closing? wait ... */
} else if (port->openclose) {
status = -EBUSY;
/* ... else we do the work */
} else {
status = -EAGAIN;
port->openclose = true;
}
spin_unlock_irq(&port->port_lock);
}
mutex_unlock(&ports[port_num].lock);
switch (status) {
default:
/* fully handled */
return status;
case -EAGAIN:
/* must do the work */
break;
case -EBUSY:
/* wait for EAGAIN task to finish */
msleep(1);
/* REVISIT could have a waitchannel here, if
* concurrent open performance is important
*/
break;
}
} while (status != -EAGAIN);
/* Do the "real open" */
spin_lock_irq(&port->port_lock);
/* allocate circular buffer on first open */
if (port->port_write_buf.buf_buf == NULL) {
spin_unlock_irq(&port->port_lock);
status = gs_buf_alloc(&port->port_write_buf, WRITE_BUF_SIZE);
spin_lock_irq(&port->port_lock);
if (status) {
pr_debug("gs_open: ttyGS%d (%p,%p) no buffer\n",
port->port_num, tty, file);
port->openclose = false;
goto exit_unlock_port;
}
}
/* REVISIT if REMOVED (ports[].port NULL), abort the open
* to let rmmod work faster (but this way isn't wrong).
*/
/* REVISIT maybe wait for "carrier detect" */
tty->driver_data = port;
port->port.tty = tty;
port->port.count = 1;
port->openclose = false;
/* if connected, start the I/O stream */
if (port->port_usb) {
struct gserial *gser = port->port_usb;
pr_debug("gs_open: start ttyGS%d\n", port->port_num);
gs_start_io(port);
if (gser->connect)
gser->connect(gser);
}
pr_debug("gs_open: ttyGS%d (%p,%p)\n", port->port_num, tty, file);
status = 0;
exit_unlock_port:
spin_unlock_irq(&port->port_lock);
return status;
}
static int gs_writes_finished(struct gs_port *p)
{
int cond;
/* return true on disconnect or empty buffer */
spin_lock_irq(&p->port_lock);
cond = (p->port_usb == NULL) || !gs_buf_data_avail(&p->port_write_buf);
spin_unlock_irq(&p->port_lock);
return cond;
}
static void gs_close(struct tty_struct *tty, struct file *file)
{
struct gs_port *port = tty->driver_data;
struct gserial *gser;
spin_lock_irq(&port->port_lock);
if (port->port.count != 1) {
if (port->port.count == 0)
WARN_ON(1);
else
--port->port.count;
goto exit;
}
pr_debug("gs_close: ttyGS%d (%p,%p) ...\n", port->port_num, tty, file);
/* mark port as closing but in use; we can drop port lock
* and sleep if necessary
*/
port->openclose = true;
port->port.count = 0;
gser = port->port_usb;
if (gser && gser->disconnect)
gser->disconnect(gser);
/* wait for circular write buffer to drain, disconnect, or at
* most GS_CLOSE_TIMEOUT seconds; then discard the rest
*/
if (gs_buf_data_avail(&port->port_write_buf) > 0 && gser) {
spin_unlock_irq(&port->port_lock);
wait_event_interruptible_timeout(port->drain_wait,
gs_writes_finished(port),
GS_CLOSE_TIMEOUT * HZ);
spin_lock_irq(&port->port_lock);
gser = port->port_usb;
}
/* Iff we're disconnected, there can be no I/O in flight so it's
* ok to free the circular buffer; else just scrub it. And don't
* let the push tasklet fire again until we're re-opened.
*/
if (gser == NULL)
gs_buf_free(&port->port_write_buf);
else
gs_buf_clear(&port->port_write_buf);
port->port.tty = NULL;
port->openclose = false;
pr_debug("gs_close: ttyGS%d (%p,%p) done!\n",
port->port_num, tty, file);
wake_up(&port->close_wait);
exit:
spin_unlock_irq(&port->port_lock);
}
static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
{
struct gs_port *port = tty->driver_data;
unsigned long flags;
pr_vdebug("gs_write: ttyGS%d (%p) writing %d bytes\n",
port->port_num, tty, count);
spin_lock_irqsave(&port->port_lock, flags);
if (count)
count = gs_buf_put(&port->port_write_buf, buf, count);
/* treat count == 0 as flush_chars() */
if (port->port_usb)
gs_start_tx(port);
spin_unlock_irqrestore(&port->port_lock, flags);
return count;
}
static int gs_put_char(struct tty_struct *tty, unsigned char ch)
{
struct gs_port *port = tty->driver_data;
unsigned long flags;
int status;
pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %ps\n",
port->port_num, tty, ch, __builtin_return_address(0));
spin_lock_irqsave(&port->port_lock, flags);
status = gs_buf_put(&port->port_write_buf, &ch, 1);
spin_unlock_irqrestore(&port->port_lock, flags);
return status;
}
static void gs_flush_chars(struct tty_struct *tty)
{
struct gs_port *port = tty->driver_data;
unsigned long flags;
pr_vdebug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
spin_lock_irqsave(&port->port_lock, flags);
if (port->port_usb)
gs_start_tx(port);
spin_unlock_irqrestore(&port->port_lock, flags);
}
static int gs_write_room(struct tty_struct *tty)
{
struct gs_port *port = tty->driver_data;
unsigned long flags;
int room = 0;
spin_lock_irqsave(&port->port_lock, flags);
if (port->port_usb)
room = gs_buf_space_avail(&port->port_write_buf);
spin_unlock_irqrestore(&port->port_lock, flags);
pr_vdebug("gs_write_room: (%d,%p) room=%d\n",
port->port_num, tty, room);
return room;
}
static int gs_chars_in_buffer(struct tty_struct *tty)
{
struct gs_port *port = tty->driver_data;
unsigned long flags;
int chars = 0;
spin_lock_irqsave(&port->port_lock, flags);
chars = gs_buf_data_avail(&port->port_write_buf);
spin_unlock_irqrestore(&port->port_lock, flags);
pr_vdebug("gs_chars_in_buffer: (%d,%p) chars=%d\n",
port->port_num, tty, chars);
return chars;
}
/* undo side effects of setting TTY_THROTTLED */
static void gs_unthrottle(struct tty_struct *tty)
{
struct gs_port *port = tty->driver_data;
unsigned long flags;
spin_lock_irqsave(&port->port_lock, flags);
if (port->port_usb) {
/* Kickstart read queue processing. We don't do xon/xoff,
* rts/cts, or other handshaking with the host, but if the
* read queue backs up enough we'll be NAKing OUT packets.
*/
tasklet_schedule(&port->push);
pr_vdebug("ttyGS%d: unthrottle\n", port->port_num);
}
spin_unlock_irqrestore(&port->port_lock, flags);
}
static int gs_break_ctl(struct tty_struct *tty, int duration)
{
struct gs_port *port = tty->driver_data;
int status = 0;
struct gserial *gser;
pr_vdebug("gs_break_ctl: ttyGS%d, send break (%d) \n",
port->port_num, duration);
spin_lock_irq(&port->port_lock);
gser = port->port_usb;
if (gser && gser->send_break)
status = gser->send_break(gser, duration);
spin_unlock_irq(&port->port_lock);
return status;
}
static const struct tty_operations gs_tty_ops = {
.open = gs_open,
.close = gs_close,
.write = gs_write,
.put_char = gs_put_char,
.flush_chars = gs_flush_chars,
.write_room = gs_write_room,
.chars_in_buffer = gs_chars_in_buffer,
.unthrottle = gs_unthrottle,
.break_ctl = gs_break_ctl,
};
/*-------------------------------------------------------------------------*/
static struct tty_driver *gs_tty_driver;
#ifdef CONFIG_U_SERIAL_CONSOLE
static struct gscons_info gscons_info;
static struct console gserial_cons;
static struct usb_request *gs_request_new(struct usb_ep *ep)
{
struct usb_request *req = usb_ep_alloc_request(ep, GFP_ATOMIC);
if (!req)
return NULL;
req->buf = kmalloc(ep->maxpacket, GFP_ATOMIC);
if (!req->buf) {
usb_ep_free_request(ep, req);
return NULL;
}
return req;
}
static void gs_request_free(struct usb_request *req, struct usb_ep *ep)
{
if (!req)
return;
kfree(req->buf);
usb_ep_free_request(ep, req);
}
static void gs_complete_out(struct usb_ep *ep, struct usb_request *req)
{
struct gscons_info *info = &gscons_info;
switch (req->status) {
default:
pr_warn("%s: unexpected %s status %d\n",
__func__, ep->name, req->status);
/* fall through */
case 0:
/* normal completion */
spin_lock(&info->con_lock);
info->req_busy = 0;
spin_unlock(&info->con_lock);
wake_up_process(info->console_thread);
break;
case -ESHUTDOWN:
/* disconnect */
pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
break;
}
}
static int gs_console_connect(int port_num)
{
struct gscons_info *info = &gscons_info;
struct gs_port *port;
struct usb_ep *ep;
if (port_num != gserial_cons.index) {
pr_err("%s: port num [%d] is not support console\n",
__func__, port_num);
return -ENXIO;
}
port = ports[port_num].port;
ep = port->port_usb->in;
if (!info->console_req) {
info->console_req = gs_request_new(ep);
if (!info->console_req)
return -ENOMEM;
info->console_req->complete = gs_complete_out;
}
info->port = port;
spin_lock(&info->con_lock);
info->req_busy = 0;
spin_unlock(&info->con_lock);
pr_vdebug("port[%d] console connect!\n", port_num);
return 0;
}
static void gs_console_disconnect(struct usb_ep *ep)
{
struct gscons_info *info = &gscons_info;
struct usb_request *req = info->console_req;
gs_request_free(req, ep);
info->console_req = NULL;
}
static int gs_console_thread(void *data)
{
struct gscons_info *info = &gscons_info;
struct gs_port *port;
struct usb_request *req;
struct usb_ep *ep;
int xfer, ret, count, size;
do {
port = info->port;
set_current_state(TASK_INTERRUPTIBLE);
if (!port || !port->port_usb
|| !port->port_usb->in || !info->console_req)
goto sched;
req = info->console_req;
ep = port->port_usb->in;
spin_lock_irq(&info->con_lock);
count = gs_buf_data_avail(&info->con_buf);
size = ep->maxpacket;
if (count > 0 && !info->req_busy) {
set_current_state(TASK_RUNNING);
if (count < size)
size = count;
xfer = gs_buf_get(&info->con_buf, req->buf, size);
req->length = xfer;
spin_unlock(&info->con_lock);
ret = usb_ep_queue(ep, req, GFP_ATOMIC);
spin_lock(&info->con_lock);
if (ret < 0)
info->req_busy = 0;
else
info->req_busy = 1;
spin_unlock_irq(&info->con_lock);
} else {
spin_unlock_irq(&info->con_lock);
sched:
if (kthread_should_stop()) {
set_current_state(TASK_RUNNING);
break;
}
schedule();
}
} while (1);
return 0;
}
static int gs_console_setup(struct console *co, char *options)
{
struct gscons_info *info = &gscons_info;
int status;
info->port = NULL;
info->console_req = NULL;
info->req_busy = 0;
spin_lock_init(&info->con_lock);
status = gs_buf_alloc(&info->con_buf, GS_CONSOLE_BUF_SIZE);
if (status) {
pr_err("%s: allocate console buffer failed\n", __func__);
return status;
}
info->console_thread = kthread_create(gs_console_thread,
co, "gs_console");
if (IS_ERR(info->console_thread)) {
pr_err("%s: cannot create console thread\n", __func__);
gs_buf_free(&info->con_buf);
return PTR_ERR(info->console_thread);
}
wake_up_process(info->console_thread);
return 0;
}
static void gs_console_write(struct console *co,
const char *buf, unsigned count)
{
struct gscons_info *info = &gscons_info;
unsigned long flags;
spin_lock_irqsave(&info->con_lock, flags);
gs_buf_put(&info->con_buf, buf, count);
spin_unlock_irqrestore(&info->con_lock, flags);
wake_up_process(info->console_thread);
}
static struct tty_driver *gs_console_device(struct console *co, int *index)
{
struct tty_driver **p = (struct tty_driver **)co->data;
if (!*p)
return NULL;
*index = co->index;
return *p;
}
static struct console gserial_cons = {
.name = "ttyGS",
.write = gs_console_write,
.device = gs_console_device,
.setup = gs_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &gs_tty_driver,
};
static void gserial_console_init(void)
{
register_console(&gserial_cons);
}
static void gserial_console_exit(void)
{
struct gscons_info *info = &gscons_info;
unregister_console(&gserial_cons);
if (!IS_ERR_OR_NULL(info->console_thread))
kthread_stop(info->console_thread);
gs_buf_free(&info->con_buf);
}
#else
static int gs_console_connect(int port_num)
{
return 0;
}
static void gs_console_disconnect(struct usb_ep *ep)
{
}
static void gserial_console_init(void)
{
}
static void gserial_console_exit(void)
{
}
#endif
static int
gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
{
struct gs_port *port;
int ret = 0;
mutex_lock(&ports[port_num].lock);
if (ports[port_num].port) {
ret = -EBUSY;
goto out;
}
port = kzalloc(sizeof(struct gs_port), GFP_KERNEL);
if (port == NULL) {
ret = -ENOMEM;
goto out;
}
tty_port_init(&port->port);
spin_lock_init(&port->port_lock);
init_waitqueue_head(&port->drain_wait);
init_waitqueue_head(&port->close_wait);
tasklet_init(&port->push, gs_rx_push, (unsigned long) port);
INIT_LIST_HEAD(&port->read_pool);
INIT_LIST_HEAD(&port->read_queue);
INIT_LIST_HEAD(&port->write_pool);
port->port_num = port_num;
port->port_line_coding = *coding;
ports[port_num].port = port;
out:
mutex_unlock(&ports[port_num].lock);
return ret;
}
static int gs_closed(struct gs_port *port)
{
int cond;
spin_lock_irq(&port->port_lock);
cond = (port->port.count == 0) && !port->openclose;
spin_unlock_irq(&port->port_lock);
return cond;
}
static void gserial_free_port(struct gs_port *port)
{
tasklet_kill(&port->push);
/* wait for old opens to finish */
wait_event(port->close_wait, gs_closed(port));
WARN_ON(port->port_usb != NULL);
tty_port_destroy(&port->port);
kfree(port);
}
void gserial_free_line(unsigned char port_num)
{
struct gs_port *port;
mutex_lock(&ports[port_num].lock);
if (WARN_ON(!ports[port_num].port)) {
mutex_unlock(&ports[port_num].lock);
return;
}
port = ports[port_num].port;
ports[port_num].port = NULL;
mutex_unlock(&ports[port_num].lock);
gserial_free_port(port);
tty_unregister_device(gs_tty_driver, port_num);
gserial_console_exit();
}
EXPORT_SYMBOL_GPL(gserial_free_line);
int gserial_alloc_line(unsigned char *line_num)
{
struct usb_cdc_line_coding coding;
struct device *tty_dev;
int ret;
int port_num;
coding.dwDTERate = cpu_to_le32(9600);
coding.bCharFormat = 8;
coding.bParityType = USB_CDC_NO_PARITY;
coding.bDataBits = USB_CDC_1_STOP_BITS;
for (port_num = 0; port_num < MAX_U_SERIAL_PORTS; port_num++) {
ret = gs_port_alloc(port_num, &coding);
if (ret == -EBUSY)
continue;
if (ret)
return ret;
break;
}
if (ret)
return ret;
/* ... and sysfs class devices, so mdev/udev make /dev/ttyGS* */
tty_dev = tty_port_register_device(&ports[port_num].port->port,
gs_tty_driver, port_num, NULL);
if (IS_ERR(tty_dev)) {
struct gs_port *port;
pr_err("%s: failed to register tty for port %d, err %ld\n",
__func__, port_num, PTR_ERR(tty_dev));
ret = PTR_ERR(tty_dev);
port = ports[port_num].port;
ports[port_num].port = NULL;
gserial_free_port(port);
goto err;
}
*line_num = port_num;
gserial_console_init();
err:
return ret;
}
EXPORT_SYMBOL_GPL(gserial_alloc_line);
/**
* gserial_connect - notify TTY I/O glue that USB link is active
* @gser: the function, set up with endpoints and descriptors
* @port_num: which port is active
* Context: any (usually from irq)
*
* This is called activate endpoints and let the TTY layer know that
* the connection is active ... not unlike "carrier detect". It won't
* necessarily start I/O queues; unless the TTY is held open by any
* task, there would be no point. However, the endpoints will be
* activated so the USB host can perform I/O, subject to basic USB
* hardware flow control.
*
* Caller needs to have set up the endpoints and USB function in @dev
* before calling this, as well as the appropriate (speed-specific)
* endpoint descriptors, and also have allocate @port_num by calling
* @gserial_alloc_line().
*
* Returns negative errno or zero.
* On success, ep->driver_data will be overwritten.
*/
int gserial_connect(struct gserial *gser, u8 port_num)
{
struct gs_port *port;
unsigned long flags;
int status;
if (port_num >= MAX_U_SERIAL_PORTS)
return -ENXIO;
port = ports[port_num].port;
if (!port) {
pr_err("serial line %d not allocated.\n", port_num);
return -EINVAL;
}
if (port->port_usb) {
pr_err("serial line %d is in use.\n", port_num);
return -EBUSY;
}
/* activate the endpoints */
status = usb_ep_enable(gser->in);
if (status < 0)
return status;
gser->in->driver_data = port;
status = usb_ep_enable(gser->out);
if (status < 0)
goto fail_out;
gser->out->driver_data = port;
/* then tell the tty glue that I/O can work */
spin_lock_irqsave(&port->port_lock, flags);
gser->ioport = port;
port->port_usb = gser;
/* REVISIT unclear how best to handle this state...
* we don't really couple it with the Linux TTY.
*/
gser->port_line_coding = port->port_line_coding;
/* REVISIT if waiting on "carrier detect", signal. */
/* if it's already open, start I/O ... and notify the serial
* protocol about open/close status (connect/disconnect).
*/
if (port->port.count) {
pr_debug("gserial_connect: start ttyGS%d\n", port->port_num);
gs_start_io(port);
if (gser->connect)
gser->connect(gser);
} else {
if (gser->disconnect)
gser->disconnect(gser);
}
status = gs_console_connect(port_num);
spin_unlock_irqrestore(&port->port_lock, flags);
return status;
fail_out:
usb_ep_disable(gser->in);
return status;
}
EXPORT_SYMBOL_GPL(gserial_connect);
/**
* gserial_disconnect - notify TTY I/O glue that USB link is inactive
* @gser: the function, on which gserial_connect() was called
* Context: any (usually from irq)
*
* This is called to deactivate endpoints and let the TTY layer know
* that the connection went inactive ... not unlike "hangup".
*
* On return, the state is as if gserial_connect() had never been called;
* there is no active USB I/O on these endpoints.
*/
void gserial_disconnect(struct gserial *gser)
{
struct gs_port *port = gser->ioport;
unsigned long flags;
if (!port)
return;
/* tell the TTY glue not to do I/O here any more */
spin_lock_irqsave(&port->port_lock, flags);
/* REVISIT as above: how best to track this? */
port->port_line_coding = gser->port_line_coding;
port->port_usb = NULL;
gser->ioport = NULL;
if (port->port.count > 0 || port->openclose) {
wake_up_interruptible(&port->drain_wait);
if (port->port.tty)
tty_hangup(port->port.tty);
}
spin_unlock_irqrestore(&port->port_lock, flags);
/* disable endpoints, aborting down any active I/O */
usb_ep_disable(gser->out);
usb_ep_disable(gser->in);
/* finally, free any unused/unusable I/O buffers */
spin_lock_irqsave(&port->port_lock, flags);
if (port->port.count == 0 && !port->openclose)
gs_buf_free(&port->port_write_buf);
gs_free_requests(gser->out, &port->read_pool, NULL);
gs_free_requests(gser->out, &port->read_queue, NULL);
gs_free_requests(gser->in, &port->write_pool, NULL);
port->read_allocated = port->read_started =
port->write_allocated = port->write_started = 0;
gs_console_disconnect(gser->in);
spin_unlock_irqrestore(&port->port_lock, flags);
}
EXPORT_SYMBOL_GPL(gserial_disconnect);
static int userial_init(void)
{
unsigned i;
int status;
gs_tty_driver = alloc_tty_driver(MAX_U_SERIAL_PORTS);
if (!gs_tty_driver)
return -ENOMEM;
gs_tty_driver->driver_name = "g_serial";
gs_tty_driver->name = "ttyGS";
/* uses dynamically assigned dev_t values */
gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
gs_tty_driver->init_termios = tty_std_termios;
/* 9600-8-N-1 ... matches defaults expected by "usbser.sys" on
* MS-Windows. Otherwise, most of these flags shouldn't affect
* anything unless we were to actually hook up to a serial line.
*/
gs_tty_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
gs_tty_driver->init_termios.c_ispeed = 9600;
gs_tty_driver->init_termios.c_ospeed = 9600;
tty_set_operations(gs_tty_driver, &gs_tty_ops);
for (i = 0; i < MAX_U_SERIAL_PORTS; i++)
mutex_init(&ports[i].lock);
/* export the driver ... */
status = tty_register_driver(gs_tty_driver);
if (status) {
pr_err("%s: cannot register, err %d\n",
__func__, status);
goto fail;
}
pr_debug("%s: registered %d ttyGS* device%s\n", __func__,
MAX_U_SERIAL_PORTS,
(MAX_U_SERIAL_PORTS == 1) ? "" : "s");
return status;
fail:
put_tty_driver(gs_tty_driver);
gs_tty_driver = NULL;
return status;
}
module_init(userial_init);
static void userial_cleanup(void)
{
tty_unregister_driver(gs_tty_driver);
put_tty_driver(gs_tty_driver);
gs_tty_driver = NULL;
}
module_exit(userial_cleanup);
MODULE_LICENSE("GPL");
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку