468 строки
11 KiB
C
468 строки
11 KiB
C
/*
|
|
* linux/arch/arm/mach-omap1/board-h2.c
|
|
*
|
|
* Board specific inits for OMAP-1610 H2
|
|
*
|
|
* Copyright (C) 2001 RidgeRun, Inc.
|
|
* Author: Greg Lonnon <glonnon@ridgerun.com>
|
|
*
|
|
* Copyright (C) 2002 MontaVista Software, Inc.
|
|
*
|
|
* Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
|
|
* Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
|
|
*
|
|
* H2 specific changes and cleanup
|
|
* Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/input.h>
|
|
#include <linux/i2c/tps65010.h>
|
|
#include <linux/smc91x.h>
|
|
#include <linux/omapfb.h>
|
|
#include <linux/platform_data/gpio-omap.h>
|
|
#include <linux/leds.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <mach/mux.h>
|
|
#include <plat/dma.h>
|
|
#include <plat/tc.h>
|
|
#include <mach/irda.h>
|
|
#include <linux/platform_data/keypad-omap.h>
|
|
#include <mach/flash.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/usb.h>
|
|
|
|
#include "common.h"
|
|
#include "board-h2.h"
|
|
|
|
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
|
|
#define OMAP1610_ETHR_START 0x04000300
|
|
|
|
static const unsigned int h2_keymap[] = {
|
|
KEY(0, 0, KEY_LEFT),
|
|
KEY(1, 0, KEY_RIGHT),
|
|
KEY(2, 0, KEY_3),
|
|
KEY(3, 0, KEY_F10),
|
|
KEY(4, 0, KEY_F5),
|
|
KEY(5, 0, KEY_9),
|
|
KEY(0, 1, KEY_DOWN),
|
|
KEY(1, 1, KEY_UP),
|
|
KEY(2, 1, KEY_2),
|
|
KEY(3, 1, KEY_F9),
|
|
KEY(4, 1, KEY_F7),
|
|
KEY(5, 1, KEY_0),
|
|
KEY(0, 2, KEY_ENTER),
|
|
KEY(1, 2, KEY_6),
|
|
KEY(2, 2, KEY_1),
|
|
KEY(3, 2, KEY_F2),
|
|
KEY(4, 2, KEY_F6),
|
|
KEY(5, 2, KEY_HOME),
|
|
KEY(0, 3, KEY_8),
|
|
KEY(1, 3, KEY_5),
|
|
KEY(2, 3, KEY_F12),
|
|
KEY(3, 3, KEY_F3),
|
|
KEY(4, 3, KEY_F8),
|
|
KEY(5, 3, KEY_END),
|
|
KEY(0, 4, KEY_7),
|
|
KEY(1, 4, KEY_4),
|
|
KEY(2, 4, KEY_F11),
|
|
KEY(3, 4, KEY_F1),
|
|
KEY(4, 4, KEY_F4),
|
|
KEY(5, 4, KEY_ESC),
|
|
KEY(0, 5, KEY_F13),
|
|
KEY(1, 5, KEY_F14),
|
|
KEY(2, 5, KEY_F15),
|
|
KEY(3, 5, KEY_F16),
|
|
KEY(4, 5, KEY_SLEEP),
|
|
};
|
|
|
|
static struct mtd_partition h2_nor_partitions[] = {
|
|
/* bootloader (U-Boot, etc) in first sector */
|
|
{
|
|
.name = "bootloader",
|
|
.offset = 0,
|
|
.size = SZ_128K,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
/* bootloader params in the next sector */
|
|
{
|
|
.name = "params",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_128K,
|
|
.mask_flags = 0,
|
|
},
|
|
/* kernel */
|
|
{
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_2M,
|
|
.mask_flags = 0
|
|
},
|
|
/* file system */
|
|
{
|
|
.name = "filesystem",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
.mask_flags = 0
|
|
}
|
|
};
|
|
|
|
static struct physmap_flash_data h2_nor_data = {
|
|
.width = 2,
|
|
.set_vpp = omap1_set_vpp,
|
|
.parts = h2_nor_partitions,
|
|
.nr_parts = ARRAY_SIZE(h2_nor_partitions),
|
|
};
|
|
|
|
static struct resource h2_nor_resource = {
|
|
/* This is on CS3, wherever it's mapped */
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device h2_nor_device = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &h2_nor_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &h2_nor_resource,
|
|
};
|
|
|
|
static struct mtd_partition h2_nand_partitions[] = {
|
|
#if 0
|
|
/* REVISIT: enable these partitions if you make NAND BOOT
|
|
* work on your H2 (rev C or newer); published versions of
|
|
* x-load only support P2 and H3.
|
|
*/
|
|
{
|
|
.name = "xloader",
|
|
.offset = 0,
|
|
.size = 64 * 1024,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
{
|
|
.name = "bootloader",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 256 * 1024,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
{
|
|
.name = "params",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 192 * 1024,
|
|
},
|
|
{
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 2 * SZ_1M,
|
|
},
|
|
#endif
|
|
{
|
|
.name = "filesystem",
|
|
.size = MTDPART_SIZ_FULL,
|
|
.offset = MTDPART_OFS_APPEND,
|
|
},
|
|
};
|
|
|
|
#define H2_NAND_RB_GPIO_PIN 62
|
|
|
|
static int h2_nand_dev_ready(struct mtd_info *mtd)
|
|
{
|
|
return gpio_get_value(H2_NAND_RB_GPIO_PIN);
|
|
}
|
|
|
|
static struct platform_nand_data h2_nand_platdata = {
|
|
.chip = {
|
|
.nr_chips = 1,
|
|
.chip_offset = 0,
|
|
.nr_partitions = ARRAY_SIZE(h2_nand_partitions),
|
|
.partitions = h2_nand_partitions,
|
|
.options = NAND_SAMSUNG_LP_OPTIONS,
|
|
},
|
|
.ctrl = {
|
|
.cmd_ctrl = omap1_nand_cmd_ctl,
|
|
.dev_ready = h2_nand_dev_ready,
|
|
},
|
|
};
|
|
|
|
static struct resource h2_nand_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device h2_nand_device = {
|
|
.name = "gen_nand",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &h2_nand_platdata,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &h2_nand_resource,
|
|
};
|
|
|
|
static struct smc91x_platdata h2_smc91x_info = {
|
|
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
|
|
.leda = RPC_LED_100_10,
|
|
.ledb = RPC_LED_TX_RX,
|
|
};
|
|
|
|
static struct resource h2_smc91x_resources[] = {
|
|
[0] = {
|
|
.start = OMAP1610_ETHR_START, /* Physical */
|
|
.end = OMAP1610_ETHR_START + 0xf,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
|
|
},
|
|
};
|
|
|
|
static struct platform_device h2_smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &h2_smc91x_info,
|
|
},
|
|
.num_resources = ARRAY_SIZE(h2_smc91x_resources),
|
|
.resource = h2_smc91x_resources,
|
|
};
|
|
|
|
static struct resource h2_kp_resources[] = {
|
|
[0] = {
|
|
.start = INT_KEYBOARD,
|
|
.end = INT_KEYBOARD,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static const struct matrix_keymap_data h2_keymap_data = {
|
|
.keymap = h2_keymap,
|
|
.keymap_size = ARRAY_SIZE(h2_keymap),
|
|
};
|
|
|
|
static struct omap_kp_platform_data h2_kp_data = {
|
|
.rows = 8,
|
|
.cols = 8,
|
|
.keymap_data = &h2_keymap_data,
|
|
.rep = true,
|
|
.delay = 9,
|
|
.dbounce = true,
|
|
};
|
|
|
|
static struct platform_device h2_kp_device = {
|
|
.name = "omap-keypad",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &h2_kp_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(h2_kp_resources),
|
|
.resource = h2_kp_resources,
|
|
};
|
|
|
|
#define H2_IRDA_FIRSEL_GPIO_PIN 17
|
|
|
|
static struct omap_irda_config h2_irda_data = {
|
|
.transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
|
|
.rx_channel = OMAP_DMA_UART3_RX,
|
|
.tx_channel = OMAP_DMA_UART3_TX,
|
|
.dest_start = UART3_THR,
|
|
.src_start = UART3_RHR,
|
|
.tx_trigger = 0,
|
|
.rx_trigger = 0,
|
|
};
|
|
|
|
static struct resource h2_irda_resources[] = {
|
|
[0] = {
|
|
.start = INT_UART3,
|
|
.end = INT_UART3,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static u64 irda_dmamask = 0xffffffff;
|
|
|
|
static struct platform_device h2_irda_device = {
|
|
.name = "omapirda",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &h2_irda_data,
|
|
.dma_mask = &irda_dmamask,
|
|
},
|
|
.num_resources = ARRAY_SIZE(h2_irda_resources),
|
|
.resource = h2_irda_resources,
|
|
};
|
|
|
|
static struct gpio_led h2_gpio_led_pins[] = {
|
|
{
|
|
.name = "h2:red",
|
|
.default_trigger = "heartbeat",
|
|
.gpio = 3,
|
|
},
|
|
{
|
|
.name = "h2:green",
|
|
.default_trigger = "cpu0",
|
|
.gpio = OMAP_MPUIO(4),
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data h2_gpio_led_data = {
|
|
.leds = h2_gpio_led_pins,
|
|
.num_leds = ARRAY_SIZE(h2_gpio_led_pins),
|
|
};
|
|
|
|
static struct platform_device h2_gpio_leds = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &h2_gpio_led_data,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *h2_devices[] __initdata = {
|
|
&h2_nor_device,
|
|
&h2_nand_device,
|
|
&h2_smc91x_device,
|
|
&h2_irda_device,
|
|
&h2_kp_device,
|
|
&h2_gpio_leds,
|
|
};
|
|
|
|
static void __init h2_init_smc91x(void)
|
|
{
|
|
if (gpio_request(0, "SMC91x irq") < 0) {
|
|
printk("Error requesting gpio 0 for smc91x irq\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
static int tps_setup(struct i2c_client *client, void *context)
|
|
{
|
|
tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
|
|
TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct tps65010_board tps_board = {
|
|
.base = H2_TPS_GPIO_BASE,
|
|
.outmask = 0x0f,
|
|
.setup = tps_setup,
|
|
};
|
|
|
|
static struct i2c_board_info __initdata h2_i2c_board_info[] = {
|
|
{
|
|
I2C_BOARD_INFO("tps65010", 0x48),
|
|
.platform_data = &tps_board,
|
|
}, {
|
|
I2C_BOARD_INFO("isp1301_omap", 0x2d),
|
|
},
|
|
};
|
|
|
|
static struct omap_usb_config h2_usb_config __initdata = {
|
|
/* usb1 has a Mini-AB port and external isp1301 transceiver */
|
|
.otg = 2,
|
|
|
|
#ifdef CONFIG_USB_GADGET_OMAP
|
|
.hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
|
|
/* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
|
|
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
|
/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
|
|
.hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
|
|
#endif
|
|
|
|
.pins[1] = 3,
|
|
};
|
|
|
|
static struct omap_lcd_config h2_lcd_config __initdata = {
|
|
.ctrl_name = "internal",
|
|
};
|
|
|
|
static void __init h2_init(void)
|
|
{
|
|
h2_init_smc91x();
|
|
|
|
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
|
|
* to address 0 by a dip switch), NAND on CS2B. The NAND driver will
|
|
* notice whether a NAND chip is enabled at probe time.
|
|
*
|
|
* FIXME revC boards (and H3) support NAND-boot, with a dip switch to
|
|
* put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3. Try
|
|
* detecting that in code here, to avoid probing every possible flash
|
|
* configuration...
|
|
*/
|
|
h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
|
|
h2_nor_resource.end += SZ_32M - 1;
|
|
|
|
h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
|
|
h2_nand_resource.end += SZ_4K - 1;
|
|
if (gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
|
|
BUG();
|
|
gpio_direction_input(H2_NAND_RB_GPIO_PIN);
|
|
|
|
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
|
|
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
|
|
|
|
/* MMC: card detect and WP */
|
|
/* omap_cfg_reg(U19_ARMIO1); */ /* CD */
|
|
omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */
|
|
|
|
/* Mux pins for keypad */
|
|
omap_cfg_reg(F18_1610_KBC0);
|
|
omap_cfg_reg(D20_1610_KBC1);
|
|
omap_cfg_reg(D19_1610_KBC2);
|
|
omap_cfg_reg(E18_1610_KBC3);
|
|
omap_cfg_reg(C21_1610_KBC4);
|
|
omap_cfg_reg(G18_1610_KBR0);
|
|
omap_cfg_reg(F19_1610_KBR1);
|
|
omap_cfg_reg(H14_1610_KBR2);
|
|
omap_cfg_reg(E20_1610_KBR3);
|
|
omap_cfg_reg(E19_1610_KBR4);
|
|
omap_cfg_reg(N19_1610_KBR5);
|
|
|
|
/* GPIO based LEDs */
|
|
omap_cfg_reg(P18_1610_GPIO3);
|
|
omap_cfg_reg(MPUIO4);
|
|
|
|
h2_smc91x_resources[1].start = gpio_to_irq(0);
|
|
h2_smc91x_resources[1].end = gpio_to_irq(0);
|
|
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
|
|
omap_serial_init();
|
|
h2_i2c_board_info[0].irq = gpio_to_irq(58);
|
|
h2_i2c_board_info[1].irq = gpio_to_irq(2);
|
|
omap_register_i2c_bus(1, 100, h2_i2c_board_info,
|
|
ARRAY_SIZE(h2_i2c_board_info));
|
|
omap1_usb_init(&h2_usb_config);
|
|
h2_mmc_init();
|
|
|
|
omapfb_set_lcd_config(&h2_lcd_config);
|
|
}
|
|
|
|
MACHINE_START(OMAP_H2, "TI-H2")
|
|
/* Maintainer: Imre Deak <imre.deak@nokia.com> */
|
|
.atag_offset = 0x100,
|
|
.map_io = omap16xx_map_io,
|
|
.init_early = omap1_init_early,
|
|
.reserve = omap_reserve,
|
|
.init_irq = omap1_init_irq,
|
|
.init_machine = h2_init,
|
|
.init_late = omap1_init_late,
|
|
.timer = &omap1_timer,
|
|
.restart = omap1_restart,
|
|
MACHINE_END
|