567 строки
14 KiB
C
567 строки
14 KiB
C
/*
|
|
* Copyright (C) 2014 Hauke Mehrtens <hauke@hauke-m.de>
|
|
* Copyright (C) 2015 Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/msi.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mbus.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_pci.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/phy/phy.h>
|
|
|
|
#include "pcie-iproc.h"
|
|
|
|
#define EP_PERST_SOURCE_SELECT_SHIFT 2
|
|
#define EP_PERST_SOURCE_SELECT BIT(EP_PERST_SOURCE_SELECT_SHIFT)
|
|
#define EP_MODE_SURVIVE_PERST_SHIFT 1
|
|
#define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT)
|
|
#define RC_PCIE_RST_OUTPUT_SHIFT 0
|
|
#define RC_PCIE_RST_OUTPUT BIT(RC_PCIE_RST_OUTPUT_SHIFT)
|
|
#define PAXC_RESET_MASK 0x7f
|
|
|
|
#define CFG_IND_ADDR_MASK 0x00001ffc
|
|
|
|
#define CFG_ADDR_BUS_NUM_SHIFT 20
|
|
#define CFG_ADDR_BUS_NUM_MASK 0x0ff00000
|
|
#define CFG_ADDR_DEV_NUM_SHIFT 15
|
|
#define CFG_ADDR_DEV_NUM_MASK 0x000f8000
|
|
#define CFG_ADDR_FUNC_NUM_SHIFT 12
|
|
#define CFG_ADDR_FUNC_NUM_MASK 0x00007000
|
|
#define CFG_ADDR_REG_NUM_SHIFT 2
|
|
#define CFG_ADDR_REG_NUM_MASK 0x00000ffc
|
|
#define CFG_ADDR_CFG_TYPE_SHIFT 0
|
|
#define CFG_ADDR_CFG_TYPE_MASK 0x00000003
|
|
|
|
#define SYS_RC_INTX_MASK 0xf
|
|
|
|
#define PCIE_PHYLINKUP_SHIFT 3
|
|
#define PCIE_PHYLINKUP BIT(PCIE_PHYLINKUP_SHIFT)
|
|
#define PCIE_DL_ACTIVE_SHIFT 2
|
|
#define PCIE_DL_ACTIVE BIT(PCIE_DL_ACTIVE_SHIFT)
|
|
|
|
#define OARR_VALID_SHIFT 0
|
|
#define OARR_VALID BIT(OARR_VALID_SHIFT)
|
|
#define OARR_SIZE_CFG_SHIFT 1
|
|
#define OARR_SIZE_CFG BIT(OARR_SIZE_CFG_SHIFT)
|
|
|
|
#define MAX_NUM_OB_WINDOWS 2
|
|
|
|
#define IPROC_PCIE_REG_INVALID 0xffff
|
|
|
|
enum iproc_pcie_reg {
|
|
IPROC_PCIE_CLK_CTRL = 0,
|
|
IPROC_PCIE_CFG_IND_ADDR,
|
|
IPROC_PCIE_CFG_IND_DATA,
|
|
IPROC_PCIE_CFG_ADDR,
|
|
IPROC_PCIE_CFG_DATA,
|
|
IPROC_PCIE_INTX_EN,
|
|
IPROC_PCIE_OARR_LO,
|
|
IPROC_PCIE_OARR_HI,
|
|
IPROC_PCIE_OMAP_LO,
|
|
IPROC_PCIE_OMAP_HI,
|
|
IPROC_PCIE_LINK_STATUS,
|
|
};
|
|
|
|
/* iProc PCIe PAXB registers */
|
|
static const u16 iproc_pcie_reg_paxb[] = {
|
|
[IPROC_PCIE_CLK_CTRL] = 0x000,
|
|
[IPROC_PCIE_CFG_IND_ADDR] = 0x120,
|
|
[IPROC_PCIE_CFG_IND_DATA] = 0x124,
|
|
[IPROC_PCIE_CFG_ADDR] = 0x1f8,
|
|
[IPROC_PCIE_CFG_DATA] = 0x1fc,
|
|
[IPROC_PCIE_INTX_EN] = 0x330,
|
|
[IPROC_PCIE_OARR_LO] = 0xd20,
|
|
[IPROC_PCIE_OARR_HI] = 0xd24,
|
|
[IPROC_PCIE_OMAP_LO] = 0xd40,
|
|
[IPROC_PCIE_OMAP_HI] = 0xd44,
|
|
[IPROC_PCIE_LINK_STATUS] = 0xf0c,
|
|
};
|
|
|
|
/* iProc PCIe PAXC v1 registers */
|
|
static const u16 iproc_pcie_reg_paxc[] = {
|
|
[IPROC_PCIE_CLK_CTRL] = 0x000,
|
|
[IPROC_PCIE_CFG_IND_ADDR] = 0x1f0,
|
|
[IPROC_PCIE_CFG_IND_DATA] = 0x1f4,
|
|
[IPROC_PCIE_CFG_ADDR] = 0x1f8,
|
|
[IPROC_PCIE_CFG_DATA] = 0x1fc,
|
|
[IPROC_PCIE_INTX_EN] = IPROC_PCIE_REG_INVALID,
|
|
[IPROC_PCIE_OARR_LO] = IPROC_PCIE_REG_INVALID,
|
|
[IPROC_PCIE_OARR_HI] = IPROC_PCIE_REG_INVALID,
|
|
[IPROC_PCIE_OMAP_LO] = IPROC_PCIE_REG_INVALID,
|
|
[IPROC_PCIE_OMAP_HI] = IPROC_PCIE_REG_INVALID,
|
|
[IPROC_PCIE_LINK_STATUS] = IPROC_PCIE_REG_INVALID,
|
|
};
|
|
|
|
static inline struct iproc_pcie *iproc_data(struct pci_bus *bus)
|
|
{
|
|
struct iproc_pcie *pcie;
|
|
#ifdef CONFIG_ARM
|
|
struct pci_sys_data *sys = bus->sysdata;
|
|
|
|
pcie = sys->private_data;
|
|
#else
|
|
pcie = bus->sysdata;
|
|
#endif
|
|
return pcie;
|
|
}
|
|
|
|
static inline bool iproc_pcie_reg_is_invalid(u16 reg_offset)
|
|
{
|
|
return !!(reg_offset == IPROC_PCIE_REG_INVALID);
|
|
}
|
|
|
|
static inline u16 iproc_pcie_reg_offset(struct iproc_pcie *pcie,
|
|
enum iproc_pcie_reg reg)
|
|
{
|
|
return pcie->reg_offsets[reg];
|
|
}
|
|
|
|
static inline u32 iproc_pcie_read_reg(struct iproc_pcie *pcie,
|
|
enum iproc_pcie_reg reg)
|
|
{
|
|
u16 offset = iproc_pcie_reg_offset(pcie, reg);
|
|
|
|
if (iproc_pcie_reg_is_invalid(offset))
|
|
return 0;
|
|
|
|
return readl(pcie->base + offset);
|
|
}
|
|
|
|
static inline void iproc_pcie_write_reg(struct iproc_pcie *pcie,
|
|
enum iproc_pcie_reg reg, u32 val)
|
|
{
|
|
u16 offset = iproc_pcie_reg_offset(pcie, reg);
|
|
|
|
if (iproc_pcie_reg_is_invalid(offset))
|
|
return;
|
|
|
|
writel(val, pcie->base + offset);
|
|
}
|
|
|
|
static inline void iproc_pcie_ob_write(struct iproc_pcie *pcie,
|
|
enum iproc_pcie_reg reg,
|
|
unsigned window, u32 val)
|
|
{
|
|
u16 offset = iproc_pcie_reg_offset(pcie, reg);
|
|
|
|
if (iproc_pcie_reg_is_invalid(offset))
|
|
return;
|
|
|
|
writel(val, pcie->base + offset + (window * 8));
|
|
}
|
|
|
|
/**
|
|
* Note access to the configuration registers are protected at the higher layer
|
|
* by 'pci_lock' in drivers/pci/access.c
|
|
*/
|
|
static void __iomem *iproc_pcie_map_cfg_bus(struct pci_bus *bus,
|
|
unsigned int devfn,
|
|
int where)
|
|
{
|
|
struct iproc_pcie *pcie = iproc_data(bus);
|
|
unsigned slot = PCI_SLOT(devfn);
|
|
unsigned fn = PCI_FUNC(devfn);
|
|
unsigned busno = bus->number;
|
|
u32 val;
|
|
u16 offset;
|
|
|
|
/* root complex access */
|
|
if (busno == 0) {
|
|
if (slot > 0 || fn > 0)
|
|
return NULL;
|
|
|
|
iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_IND_ADDR,
|
|
where & CFG_IND_ADDR_MASK);
|
|
offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_IND_DATA);
|
|
if (iproc_pcie_reg_is_invalid(offset))
|
|
return NULL;
|
|
else
|
|
return (pcie->base + offset);
|
|
}
|
|
|
|
/*
|
|
* PAXC is connected to an internally emulated EP within the SoC. It
|
|
* allows only one device.
|
|
*/
|
|
if (pcie->type == IPROC_PCIE_PAXC)
|
|
if (slot > 0)
|
|
return NULL;
|
|
|
|
/* EP device access */
|
|
val = (busno << CFG_ADDR_BUS_NUM_SHIFT) |
|
|
(slot << CFG_ADDR_DEV_NUM_SHIFT) |
|
|
(fn << CFG_ADDR_FUNC_NUM_SHIFT) |
|
|
(where & CFG_ADDR_REG_NUM_MASK) |
|
|
(1 & CFG_ADDR_CFG_TYPE_MASK);
|
|
iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_ADDR, val);
|
|
offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_DATA);
|
|
if (iproc_pcie_reg_is_invalid(offset))
|
|
return NULL;
|
|
else
|
|
return (pcie->base + offset);
|
|
}
|
|
|
|
static struct pci_ops iproc_pcie_ops = {
|
|
.map_bus = iproc_pcie_map_cfg_bus,
|
|
.read = pci_generic_config_read32,
|
|
.write = pci_generic_config_write32,
|
|
};
|
|
|
|
static void iproc_pcie_reset(struct iproc_pcie *pcie)
|
|
{
|
|
u32 val;
|
|
|
|
if (pcie->type == IPROC_PCIE_PAXC) {
|
|
val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL);
|
|
val &= ~PAXC_RESET_MASK;
|
|
iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
|
|
udelay(100);
|
|
val |= PAXC_RESET_MASK;
|
|
iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
|
|
udelay(100);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Select perst_b signal as reset source. Put the device into reset,
|
|
* and then bring it out of reset
|
|
*/
|
|
val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL);
|
|
val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST &
|
|
~RC_PCIE_RST_OUTPUT;
|
|
iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
|
|
udelay(250);
|
|
|
|
val |= RC_PCIE_RST_OUTPUT;
|
|
iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
|
|
msleep(100);
|
|
}
|
|
|
|
static int iproc_pcie_check_link(struct iproc_pcie *pcie, struct pci_bus *bus)
|
|
{
|
|
u8 hdr_type;
|
|
u32 link_ctrl, class, val;
|
|
u16 pos, link_status;
|
|
bool link_is_active = false;
|
|
|
|
/*
|
|
* PAXC connects to emulated endpoint devices directly and does not
|
|
* have a Serdes. Therefore skip the link detection logic here.
|
|
*/
|
|
if (pcie->type == IPROC_PCIE_PAXC)
|
|
return 0;
|
|
|
|
val = iproc_pcie_read_reg(pcie, IPROC_PCIE_LINK_STATUS);
|
|
if (!(val & PCIE_PHYLINKUP) || !(val & PCIE_DL_ACTIVE)) {
|
|
dev_err(pcie->dev, "PHY or data link is INACTIVE!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* make sure we are not in EP mode */
|
|
pci_bus_read_config_byte(bus, 0, PCI_HEADER_TYPE, &hdr_type);
|
|
if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) {
|
|
dev_err(pcie->dev, "in EP mode, hdr=%#02x\n", hdr_type);
|
|
return -EFAULT;
|
|
}
|
|
|
|
/* force class to PCI_CLASS_BRIDGE_PCI (0x0604) */
|
|
#define PCI_BRIDGE_CTRL_REG_OFFSET 0x43c
|
|
#define PCI_CLASS_BRIDGE_MASK 0xffff00
|
|
#define PCI_CLASS_BRIDGE_SHIFT 8
|
|
pci_bus_read_config_dword(bus, 0, PCI_BRIDGE_CTRL_REG_OFFSET, &class);
|
|
class &= ~PCI_CLASS_BRIDGE_MASK;
|
|
class |= (PCI_CLASS_BRIDGE_PCI << PCI_CLASS_BRIDGE_SHIFT);
|
|
pci_bus_write_config_dword(bus, 0, PCI_BRIDGE_CTRL_REG_OFFSET, class);
|
|
|
|
/* check link status to see if link is active */
|
|
pos = pci_bus_find_capability(bus, 0, PCI_CAP_ID_EXP);
|
|
pci_bus_read_config_word(bus, 0, pos + PCI_EXP_LNKSTA, &link_status);
|
|
if (link_status & PCI_EXP_LNKSTA_NLW)
|
|
link_is_active = true;
|
|
|
|
if (!link_is_active) {
|
|
/* try GEN 1 link speed */
|
|
#define PCI_LINK_STATUS_CTRL_2_OFFSET 0x0dc
|
|
#define PCI_TARGET_LINK_SPEED_MASK 0xf
|
|
#define PCI_TARGET_LINK_SPEED_GEN2 0x2
|
|
#define PCI_TARGET_LINK_SPEED_GEN1 0x1
|
|
pci_bus_read_config_dword(bus, 0,
|
|
PCI_LINK_STATUS_CTRL_2_OFFSET,
|
|
&link_ctrl);
|
|
if ((link_ctrl & PCI_TARGET_LINK_SPEED_MASK) ==
|
|
PCI_TARGET_LINK_SPEED_GEN2) {
|
|
link_ctrl &= ~PCI_TARGET_LINK_SPEED_MASK;
|
|
link_ctrl |= PCI_TARGET_LINK_SPEED_GEN1;
|
|
pci_bus_write_config_dword(bus, 0,
|
|
PCI_LINK_STATUS_CTRL_2_OFFSET,
|
|
link_ctrl);
|
|
msleep(100);
|
|
|
|
pos = pci_bus_find_capability(bus, 0, PCI_CAP_ID_EXP);
|
|
pci_bus_read_config_word(bus, 0, pos + PCI_EXP_LNKSTA,
|
|
&link_status);
|
|
if (link_status & PCI_EXP_LNKSTA_NLW)
|
|
link_is_active = true;
|
|
}
|
|
}
|
|
|
|
dev_info(pcie->dev, "link: %s\n", link_is_active ? "UP" : "DOWN");
|
|
|
|
return link_is_active ? 0 : -ENODEV;
|
|
}
|
|
|
|
static void iproc_pcie_enable(struct iproc_pcie *pcie)
|
|
{
|
|
iproc_pcie_write_reg(pcie, IPROC_PCIE_INTX_EN, SYS_RC_INTX_MASK);
|
|
}
|
|
|
|
/**
|
|
* Some iProc SoCs require the SW to configure the outbound address mapping
|
|
*
|
|
* Outbound address translation:
|
|
*
|
|
* iproc_pcie_address = axi_address - axi_offset
|
|
* OARR = iproc_pcie_address
|
|
* OMAP = pci_addr
|
|
*
|
|
* axi_addr -> iproc_pcie_address -> OARR -> OMAP -> pci_address
|
|
*/
|
|
static int iproc_pcie_setup_ob(struct iproc_pcie *pcie, u64 axi_addr,
|
|
u64 pci_addr, resource_size_t size)
|
|
{
|
|
struct iproc_pcie_ob *ob = &pcie->ob;
|
|
unsigned i;
|
|
u64 max_size = (u64)ob->window_size * MAX_NUM_OB_WINDOWS;
|
|
u64 remainder;
|
|
|
|
if (size > max_size) {
|
|
dev_err(pcie->dev,
|
|
"res size %pap exceeds max supported size 0x%llx\n",
|
|
&size, max_size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
div64_u64_rem(size, ob->window_size, &remainder);
|
|
if (remainder) {
|
|
dev_err(pcie->dev,
|
|
"res size %pap needs to be multiple of window size %pap\n",
|
|
&size, &ob->window_size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (axi_addr < ob->axi_offset) {
|
|
dev_err(pcie->dev,
|
|
"axi address %pap less than offset %pap\n",
|
|
&axi_addr, &ob->axi_offset);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Translate the AXI address to the internal address used by the iProc
|
|
* PCIe core before programming the OARR
|
|
*/
|
|
axi_addr -= ob->axi_offset;
|
|
|
|
for (i = 0; i < MAX_NUM_OB_WINDOWS; i++) {
|
|
iproc_pcie_ob_write(pcie, IPROC_PCIE_OARR_LO, i,
|
|
lower_32_bits(axi_addr) | OARR_VALID |
|
|
(ob->set_oarr_size ? 1 : 0));
|
|
iproc_pcie_ob_write(pcie, IPROC_PCIE_OARR_HI, i,
|
|
upper_32_bits(axi_addr));
|
|
iproc_pcie_ob_write(pcie, IPROC_PCIE_OMAP_LO, i,
|
|
lower_32_bits(pci_addr));
|
|
iproc_pcie_ob_write(pcie, IPROC_PCIE_OMAP_HI, i,
|
|
upper_32_bits(pci_addr));
|
|
|
|
size -= ob->window_size;
|
|
if (size == 0)
|
|
break;
|
|
|
|
axi_addr += ob->window_size;
|
|
pci_addr += ob->window_size;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iproc_pcie_map_ranges(struct iproc_pcie *pcie,
|
|
struct list_head *resources)
|
|
{
|
|
struct resource_entry *window;
|
|
int ret;
|
|
|
|
resource_list_for_each_entry(window, resources) {
|
|
struct resource *res = window->res;
|
|
u64 res_type = resource_type(res);
|
|
|
|
switch (res_type) {
|
|
case IORESOURCE_IO:
|
|
case IORESOURCE_BUS:
|
|
break;
|
|
case IORESOURCE_MEM:
|
|
ret = iproc_pcie_setup_ob(pcie, res->start,
|
|
res->start - window->offset,
|
|
resource_size(res));
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
default:
|
|
dev_err(pcie->dev, "invalid resource %pR\n", res);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iproc_pcie_msi_enable(struct iproc_pcie *pcie)
|
|
{
|
|
struct device_node *msi_node;
|
|
|
|
msi_node = of_parse_phandle(pcie->dev->of_node, "msi-parent", 0);
|
|
if (!msi_node)
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* If another MSI controller is being used, the call below should fail
|
|
* but that is okay
|
|
*/
|
|
return iproc_msi_init(pcie, msi_node);
|
|
}
|
|
|
|
static void iproc_pcie_msi_disable(struct iproc_pcie *pcie)
|
|
{
|
|
iproc_msi_exit(pcie);
|
|
}
|
|
|
|
int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
|
|
{
|
|
int ret;
|
|
void *sysdata;
|
|
struct pci_bus *bus;
|
|
|
|
if (!pcie || !pcie->dev || !pcie->base)
|
|
return -EINVAL;
|
|
|
|
ret = devm_request_pci_bus_resources(pcie->dev, res);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = phy_init(pcie->phy);
|
|
if (ret) {
|
|
dev_err(pcie->dev, "unable to initialize PCIe PHY\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = phy_power_on(pcie->phy);
|
|
if (ret) {
|
|
dev_err(pcie->dev, "unable to power on PCIe PHY\n");
|
|
goto err_exit_phy;
|
|
}
|
|
|
|
switch (pcie->type) {
|
|
case IPROC_PCIE_PAXB:
|
|
pcie->reg_offsets = iproc_pcie_reg_paxb;
|
|
break;
|
|
case IPROC_PCIE_PAXC:
|
|
pcie->reg_offsets = iproc_pcie_reg_paxc;
|
|
break;
|
|
default:
|
|
dev_err(pcie->dev, "incompatible iProc PCIe interface\n");
|
|
ret = -EINVAL;
|
|
goto err_power_off_phy;
|
|
}
|
|
|
|
iproc_pcie_reset(pcie);
|
|
|
|
if (pcie->need_ob_cfg) {
|
|
ret = iproc_pcie_map_ranges(pcie, res);
|
|
if (ret) {
|
|
dev_err(pcie->dev, "map failed\n");
|
|
goto err_power_off_phy;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_ARM
|
|
pcie->sysdata.private_data = pcie;
|
|
sysdata = &pcie->sysdata;
|
|
#else
|
|
sysdata = pcie;
|
|
#endif
|
|
|
|
bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops, sysdata, res);
|
|
if (!bus) {
|
|
dev_err(pcie->dev, "unable to create PCI root bus\n");
|
|
ret = -ENOMEM;
|
|
goto err_power_off_phy;
|
|
}
|
|
pcie->root_bus = bus;
|
|
|
|
ret = iproc_pcie_check_link(pcie, bus);
|
|
if (ret) {
|
|
dev_err(pcie->dev, "no PCIe EP device detected\n");
|
|
goto err_rm_root_bus;
|
|
}
|
|
|
|
iproc_pcie_enable(pcie);
|
|
|
|
if (IS_ENABLED(CONFIG_PCI_MSI))
|
|
if (iproc_pcie_msi_enable(pcie))
|
|
dev_info(pcie->dev, "not using iProc MSI\n");
|
|
|
|
pci_scan_child_bus(bus);
|
|
pci_assign_unassigned_bus_resources(bus);
|
|
pci_fixup_irqs(pci_common_swizzle, pcie->map_irq);
|
|
pci_bus_add_devices(bus);
|
|
|
|
return 0;
|
|
|
|
err_rm_root_bus:
|
|
pci_stop_root_bus(bus);
|
|
pci_remove_root_bus(bus);
|
|
|
|
err_power_off_phy:
|
|
phy_power_off(pcie->phy);
|
|
err_exit_phy:
|
|
phy_exit(pcie->phy);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(iproc_pcie_setup);
|
|
|
|
int iproc_pcie_remove(struct iproc_pcie *pcie)
|
|
{
|
|
pci_stop_root_bus(pcie->root_bus);
|
|
pci_remove_root_bus(pcie->root_bus);
|
|
|
|
iproc_pcie_msi_disable(pcie);
|
|
|
|
phy_power_off(pcie->phy);
|
|
phy_exit(pcie->phy);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(iproc_pcie_remove);
|
|
|
|
MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
|
|
MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver");
|
|
MODULE_LICENSE("GPL v2");
|