909 строки
25 KiB
Plaintext
909 строки
25 KiB
Plaintext
#
|
|
# GPIO infrastructure and drivers
|
|
#
|
|
|
|
config ARCH_HAVE_CUSTOM_GPIO_H
|
|
bool
|
|
help
|
|
Selecting this config option from the architecture Kconfig allows
|
|
the architecture to provide a custom asm/gpio.h implementation
|
|
overriding the default implementations. New uses of this are
|
|
strongly discouraged.
|
|
|
|
config ARCH_WANT_OPTIONAL_GPIOLIB
|
|
bool
|
|
help
|
|
Select this config option from the architecture Kconfig, if
|
|
it is possible to use gpiolib on the architecture, but let the
|
|
user decide whether to actually build it or not.
|
|
Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
|
|
not depend on GPIOs being available, but rather let the user
|
|
decide whether he needs it or not.
|
|
|
|
config ARCH_REQUIRE_GPIOLIB
|
|
bool
|
|
select GPIOLIB
|
|
help
|
|
Platforms select gpiolib if they use this infrastructure
|
|
for all their GPIOs, usually starting with ones integrated
|
|
into SOC processors.
|
|
Selecting this from the architecture code will cause the gpiolib
|
|
code to always get built in.
|
|
|
|
|
|
menuconfig GPIOLIB
|
|
bool "GPIO Support"
|
|
depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
|
|
help
|
|
This enables GPIO support through the generic GPIO library.
|
|
You only need to enable this, if you also want to enable
|
|
one or more of the GPIO drivers below.
|
|
|
|
If unsure, say N.
|
|
|
|
if GPIOLIB
|
|
|
|
config GPIO_DEVRES
|
|
def_bool y
|
|
depends on HAS_IOMEM
|
|
|
|
config OF_GPIO
|
|
def_bool y
|
|
depends on OF
|
|
|
|
config GPIO_ACPI
|
|
def_bool y
|
|
depends on ACPI
|
|
|
|
config GPIOLIB_IRQCHIP
|
|
select IRQ_DOMAIN
|
|
bool
|
|
|
|
config DEBUG_GPIO
|
|
bool "Debug GPIO calls"
|
|
depends on DEBUG_KERNEL
|
|
help
|
|
Say Y here to add some extra checks and diagnostics to GPIO calls.
|
|
These checks help ensure that GPIOs have been properly initialized
|
|
before they are used, and that sleeping calls are not made from
|
|
non-sleeping contexts. They can make bitbanged serial protocols
|
|
slower. The diagnostics help catch the type of setup errors
|
|
that are most common when setting up new platforms or boards.
|
|
|
|
config GPIO_SYSFS
|
|
bool "/sys/class/gpio/... (sysfs interface)"
|
|
depends on SYSFS
|
|
help
|
|
Say Y here to add a sysfs interface for GPIOs.
|
|
|
|
This is mostly useful to work around omissions in a system's
|
|
kernel support. Those are common in custom and semicustom
|
|
hardware assembled using standard kernels with a minimum of
|
|
custom patches. In those cases, userspace code may import
|
|
a given GPIO from the kernel, if no kernel driver requested it.
|
|
|
|
Kernel drivers may also request that a particular GPIO be
|
|
exported to userspace; this can be useful when debugging.
|
|
|
|
config GPIO_GENERIC
|
|
tristate
|
|
|
|
# put drivers in the right section, in alphabetical order
|
|
|
|
config GPIO_DA9052
|
|
tristate "Dialog DA9052 GPIO"
|
|
depends on PMIC_DA9052
|
|
help
|
|
Say yes here to enable the GPIO driver for the DA9052 chip.
|
|
|
|
config GPIO_DA9055
|
|
tristate "Dialog Semiconductor DA9055 GPIO"
|
|
depends on MFD_DA9055
|
|
help
|
|
Say yes here to enable the GPIO driver for the DA9055 chip.
|
|
|
|
The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
|
|
be controller by this driver.
|
|
|
|
If driver is built as a module it will be called gpio-da9055.
|
|
|
|
config GPIO_MAX730X
|
|
tristate
|
|
|
|
comment "Memory mapped GPIO drivers:"
|
|
|
|
config GPIO_CLPS711X
|
|
tristate "CLPS711X GPIO support"
|
|
depends on ARCH_CLPS711X || COMPILE_TEST
|
|
select GPIO_GENERIC
|
|
help
|
|
Say yes here to support GPIO on CLPS711X SoCs.
|
|
|
|
config GPIO_DAVINCI
|
|
bool "TI Davinci/Keystone GPIO support"
|
|
default y if ARCH_DAVINCI
|
|
depends on ARM && (ARCH_DAVINCI || ARCH_KEYSTONE)
|
|
help
|
|
Say yes here to enable GPIO support for TI Davinci/Keystone SoCs.
|
|
|
|
config GPIO_GENERIC_PLATFORM
|
|
tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
|
|
select GPIO_GENERIC
|
|
help
|
|
Say yes here to support basic platform_device memory-mapped GPIO controllers.
|
|
|
|
config GPIO_DWAPB
|
|
tristate "Synopsys DesignWare APB GPIO driver"
|
|
select GPIO_GENERIC
|
|
select GENERIC_IRQ_CHIP
|
|
help
|
|
Say Y or M here to build support for the Synopsys DesignWare APB
|
|
GPIO block.
|
|
|
|
config GPIO_IT8761E
|
|
tristate "IT8761E GPIO support"
|
|
depends on X86 # unconditional access to IO space.
|
|
help
|
|
Say yes here to support GPIO functionality of IT8761E super I/O chip.
|
|
|
|
config GPIO_EM
|
|
tristate "Emma Mobile GPIO"
|
|
depends on ARM && OF_GPIO
|
|
help
|
|
Say yes here to support GPIO on Renesas Emma Mobile SoCs.
|
|
|
|
config GPIO_EP93XX
|
|
def_bool y
|
|
depends on ARCH_EP93XX
|
|
select GPIO_GENERIC
|
|
|
|
config GPIO_ZEVIO
|
|
bool "LSI ZEVIO SoC memory mapped GPIOs"
|
|
depends on ARM && OF_GPIO
|
|
help
|
|
Say yes here to support the GPIO controller in LSI ZEVIO SoCs.
|
|
|
|
config GPIO_MM_LANTIQ
|
|
bool "Lantiq Memory mapped GPIOs"
|
|
depends on LANTIQ && SOC_XWAY
|
|
help
|
|
This enables support for memory mapped GPIOs on the External Bus Unit
|
|
(EBU) found on Lantiq SoCs. The gpios are output only as they are
|
|
created by attaching a 16bit latch to the bus.
|
|
|
|
config GPIO_F7188X
|
|
tristate "F71882FG and F71889F GPIO support"
|
|
depends on X86
|
|
help
|
|
This option enables support for GPIOs found on Fintek Super-I/O
|
|
chips F71882FG and F71889F.
|
|
|
|
To compile this driver as a module, choose M here: the module will
|
|
be called f7188x-gpio.
|
|
|
|
config GPIO_MOXART
|
|
bool "MOXART GPIO support"
|
|
depends on ARCH_MOXART
|
|
help
|
|
Select this option to enable GPIO driver for
|
|
MOXA ART SoC devices.
|
|
|
|
config GPIO_MPC5200
|
|
def_bool y
|
|
depends on PPC_MPC52xx
|
|
|
|
config GPIO_MPC8XXX
|
|
bool "MPC512x/MPC8xxx GPIO support"
|
|
depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
|
|
FSL_SOC_BOOKE || PPC_86xx
|
|
help
|
|
Say Y here if you're going to use hardware that connects to the
|
|
MPC512x/831x/834x/837x/8572/8610 GPIOs.
|
|
|
|
config GPIO_MSM_V1
|
|
tristate "Qualcomm MSM GPIO v1"
|
|
depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
|
|
help
|
|
Say yes here to support the GPIO interface on ARM v6 based
|
|
Qualcomm MSM chips. Most of the pins on the MSM can be
|
|
selected for GPIO, and are controlled by this driver.
|
|
|
|
config GPIO_MSM_V2
|
|
tristate "Qualcomm MSM GPIO v2"
|
|
depends on GPIOLIB && OF && ARCH_QCOM
|
|
help
|
|
Say yes here to support the GPIO interface on ARM v7 based
|
|
Qualcomm MSM chips. Most of the pins on the MSM can be
|
|
selected for GPIO, and are controlled by this driver.
|
|
|
|
config GPIO_MVEBU
|
|
def_bool y
|
|
depends on PLAT_ORION
|
|
depends on OF
|
|
select GPIO_GENERIC
|
|
select GENERIC_IRQ_CHIP
|
|
|
|
config GPIO_MXC
|
|
def_bool y
|
|
depends on ARCH_MXC
|
|
select GPIO_GENERIC
|
|
select GENERIC_IRQ_CHIP
|
|
|
|
config GPIO_MXS
|
|
def_bool y
|
|
depends on ARCH_MXS
|
|
select GPIO_GENERIC
|
|
select GENERIC_IRQ_CHIP
|
|
|
|
config GPIO_OCTEON
|
|
tristate "Cavium OCTEON GPIO"
|
|
depends on GPIOLIB && CAVIUM_OCTEON_SOC
|
|
default y
|
|
help
|
|
Say yes here to support the on-chip GPIO lines on the OCTEON
|
|
family of SOCs.
|
|
|
|
config GPIO_OMAP
|
|
bool "TI OMAP GPIO support" if COMPILE_TEST && !ARCH_OMAP2PLUS
|
|
default y if ARCH_OMAP
|
|
depends on ARM
|
|
select GENERIC_IRQ_CHIP
|
|
select GPIOLIB_IRQCHIP
|
|
help
|
|
Say yes here to enable GPIO support for TI OMAP SoCs.
|
|
|
|
config GPIO_PL061
|
|
bool "PrimeCell PL061 GPIO support"
|
|
depends on ARM_AMBA
|
|
select IRQ_DOMAIN
|
|
select GPIOLIB_IRQCHIP
|
|
help
|
|
Say yes here to support the PrimeCell PL061 GPIO device
|
|
|
|
config GPIO_PXA
|
|
bool "PXA GPIO support"
|
|
depends on ARCH_PXA || ARCH_MMP
|
|
help
|
|
Say yes here to support the PXA GPIO device
|
|
|
|
config GPIO_RCAR
|
|
tristate "Renesas R-Car GPIO"
|
|
depends on ARM && (ARCH_SHMOBILE || COMPILE_TEST)
|
|
help
|
|
Say yes here to support GPIO on Renesas R-Car SoCs.
|
|
|
|
config GPIO_SAMSUNG
|
|
bool
|
|
depends on PLAT_SAMSUNG
|
|
help
|
|
Legacy GPIO support. Use only for platforms without support for
|
|
pinctrl.
|
|
|
|
config GPIO_SCH311X
|
|
tristate "SMSC SCH311x SuperI/O GPIO"
|
|
help
|
|
Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and
|
|
SCH3116 "Super I/O" chipsets.
|
|
|
|
To compile this driver as a module, choose M here: the module will
|
|
be called gpio-sch311x.
|
|
|
|
config GPIO_SPEAR_SPICS
|
|
bool "ST SPEAr13xx SPI Chip Select as GPIO support"
|
|
depends on PLAT_SPEAR
|
|
select GENERIC_IRQ_CHIP
|
|
help
|
|
Say yes here to support ST SPEAr SPI Chip Select as GPIO device
|
|
|
|
config GPIO_STA2X11
|
|
bool "STA2x11/ConneXt GPIO support"
|
|
depends on MFD_STA2X11
|
|
select GENERIC_IRQ_CHIP
|
|
help
|
|
Say yes here to support the STA2x11/ConneXt GPIO device.
|
|
The GPIO module has 128 GPIO pins with alternate functions.
|
|
|
|
config GPIO_SYSCON
|
|
tristate "GPIO based on SYSCON"
|
|
depends on MFD_SYSCON && OF
|
|
help
|
|
Say yes here to support GPIO functionality though SYSCON driver.
|
|
|
|
config GPIO_TS5500
|
|
tristate "TS-5500 DIO blocks and compatibles"
|
|
depends on TS5500 || COMPILE_TEST
|
|
help
|
|
This driver supports Digital I/O exposed by pin blocks found on some
|
|
Technologic Systems platforms. It includes, but is not limited to, 3
|
|
blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
|
|
LCD port.
|
|
|
|
config GPIO_TZ1090
|
|
bool "Toumaz Xenif TZ1090 GPIO support"
|
|
depends on SOC_TZ1090
|
|
select GENERIC_IRQ_CHIP
|
|
default y
|
|
help
|
|
Say yes here to support Toumaz Xenif TZ1090 GPIOs.
|
|
|
|
config GPIO_TZ1090_PDC
|
|
bool "Toumaz Xenif TZ1090 PDC GPIO support"
|
|
depends on SOC_TZ1090
|
|
default y
|
|
help
|
|
Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs.
|
|
|
|
config GPIO_XGENE
|
|
bool "APM X-Gene GPIO controller support"
|
|
depends on ARM64 && OF_GPIO
|
|
help
|
|
This driver is to support the GPIO block within the APM X-Gene SoC
|
|
platform's generic flash controller. The GPIO pins are muxed with
|
|
the generic flash controller's address and data pins. Say yes
|
|
here to enable the GFC GPIO functionality.
|
|
|
|
config GPIO_XILINX
|
|
bool "Xilinx GPIO support"
|
|
depends on PPC_OF || MICROBLAZE || ARCH_ZYNQ
|
|
help
|
|
Say yes here to support the Xilinx FPGA GPIO device
|
|
|
|
config GPIO_ZYNQ
|
|
tristate "Xilinx Zynq GPIO support"
|
|
depends on ARCH_ZYNQ
|
|
select GPIOLIB_IRQCHIP
|
|
help
|
|
Say yes here to support Xilinx Zynq GPIO controller.
|
|
|
|
config GPIO_XTENSA
|
|
bool "Xtensa GPIO32 support"
|
|
depends on XTENSA
|
|
depends on HAVE_XTENSA_GPIO32
|
|
depends on !SMP
|
|
help
|
|
Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input)
|
|
and EXPSTATE (output) ports
|
|
|
|
config GPIO_VR41XX
|
|
tristate "NEC VR4100 series General-purpose I/O Uint support"
|
|
depends on CPU_VR41XX
|
|
help
|
|
Say yes here to support the NEC VR4100 series General-purpose I/O Uint
|
|
|
|
config GPIO_SCH
|
|
tristate "Intel SCH/TunnelCreek/Centerton GPIO"
|
|
depends on PCI && X86
|
|
select MFD_CORE
|
|
select LPC_SCH
|
|
help
|
|
Say yes here to support GPIO interface on Intel Poulsbo SCH,
|
|
Intel Tunnel Creek processor or Intel Centerton processor.
|
|
The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
|
|
powered by the core power rail and are turned off during sleep
|
|
modes (S3 and higher). The remaining four GPIOs are powered by
|
|
the Intel SCH suspend power supply. These GPIOs remain
|
|
active during S3. The suspend powered GPIOs can be used to wake the
|
|
system from the Suspend-to-RAM state.
|
|
The Intel Tunnel Creek processor has 5 GPIOs powered by the
|
|
core power rail and 9 from suspend power supply.
|
|
The Intel Centerton processor has a total of 30 GPIO pins.
|
|
Twenty-one are powered by the core power rail and 9 from the
|
|
suspend power supply.
|
|
|
|
config GPIO_ICH
|
|
tristate "Intel ICH GPIO"
|
|
depends on PCI && X86
|
|
select MFD_CORE
|
|
select LPC_ICH
|
|
help
|
|
Say yes here to support the GPIO functionality of a number of Intel
|
|
ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
|
|
ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
|
|
Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).
|
|
|
|
If unsure, say N.
|
|
|
|
config GPIO_IOP
|
|
tristate "Intel IOP GPIO"
|
|
depends on ARM && (ARCH_IOP32X || ARCH_IOP33X)
|
|
help
|
|
Say yes here to support the GPIO functionality of a number of Intel
|
|
IOP32X or IOP33X.
|
|
|
|
If unsure, say N.
|
|
|
|
config GPIO_VX855
|
|
tristate "VIA VX855/VX875 GPIO"
|
|
depends on PCI
|
|
select MFD_CORE
|
|
select MFD_VX855
|
|
help
|
|
Support access to the VX855/VX875 GPIO lines through the gpio library.
|
|
|
|
This driver provides common support for accessing the device,
|
|
additional drivers must be enabled in order to use the
|
|
functionality of the device.
|
|
|
|
config GPIO_GE_FPGA
|
|
bool "GE FPGA based GPIO"
|
|
depends on GE_FPGA
|
|
help
|
|
Support for common GPIO functionality provided on some GE Single Board
|
|
Computers.
|
|
|
|
This driver provides basic support (configure as input or output, read
|
|
and write pin state) for GPIO implemented in a number of GE single
|
|
board computers.
|
|
|
|
config GPIO_LYNXPOINT
|
|
tristate "Intel Lynxpoint GPIO support"
|
|
depends on ACPI && X86
|
|
select GPIOLIB_IRQCHIP
|
|
help
|
|
driver for GPIO functionality on Intel Lynxpoint PCH chipset
|
|
Requires ACPI device enumeration code to set up a platform device.
|
|
|
|
config GPIO_GRGPIO
|
|
tristate "Aeroflex Gaisler GRGPIO support"
|
|
depends on OF
|
|
select GPIO_GENERIC
|
|
select IRQ_DOMAIN
|
|
help
|
|
Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
|
|
VHDL IP core library.
|
|
|
|
config GPIO_TB10X
|
|
bool
|
|
select GENERIC_IRQ_CHIP
|
|
select OF_GPIO
|
|
|
|
comment "I2C GPIO expanders:"
|
|
|
|
config GPIO_ARIZONA
|
|
tristate "Wolfson Microelectronics Arizona class devices"
|
|
depends on MFD_ARIZONA
|
|
help
|
|
Support for GPIOs on Wolfson Arizona class devices.
|
|
|
|
config GPIO_CRYSTAL_COVE
|
|
tristate "GPIO support for Crystal Cove PMIC"
|
|
depends on INTEL_SOC_PMIC
|
|
select GPIOLIB_IRQCHIP
|
|
help
|
|
Support for GPIO pins on Crystal Cove PMIC.
|
|
|
|
Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
|
|
inside.
|
|
|
|
This driver can also be built as a module. If so, the module will be
|
|
called gpio-crystalcove.
|
|
|
|
config GPIO_LP3943
|
|
tristate "TI/National Semiconductor LP3943 GPIO expander"
|
|
depends on MFD_LP3943
|
|
help
|
|
GPIO driver for LP3943 MFD.
|
|
LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
|
|
Open drain outputs are required for this usage.
|
|
|
|
config GPIO_MAX7300
|
|
tristate "Maxim MAX7300 GPIO expander"
|
|
depends on I2C
|
|
select GPIO_MAX730X
|
|
help
|
|
GPIO driver for Maxim MAX7300 I2C-based GPIO expander.
|
|
|
|
config GPIO_MAX732X
|
|
tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
|
|
depends on I2C
|
|
help
|
|
Say yes here to support the MAX7319, MAX7320-7327 series of I2C
|
|
Port Expanders. Each IO port on these chips has a fixed role of
|
|
Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
|
|
Input and Output (designed by 'P'). The combinations are listed
|
|
below:
|
|
|
|
8 bits: max7319 (8I), max7320 (8O), max7321 (8P),
|
|
max7322 (4I4O), max7323 (4P4O)
|
|
|
|
16 bits: max7324 (8I8O), max7325 (8P8O),
|
|
max7326 (4I12O), max7327 (4P12O)
|
|
|
|
Board setup code must specify the model to use, and the start
|
|
number for these GPIOs.
|
|
|
|
config GPIO_MAX732X_IRQ
|
|
bool "Interrupt controller support for MAX732x"
|
|
depends on GPIO_MAX732X=y
|
|
help
|
|
Say yes here to enable the max732x to be used as an interrupt
|
|
controller. It requires the driver to be built in the kernel.
|
|
|
|
config GPIO_MC9S08DZ60
|
|
bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
|
|
depends on I2C=y && MACH_MX35_3DS
|
|
help
|
|
Select this to enable the MC9S08DZ60 GPIO driver
|
|
|
|
config GPIO_PCA953X
|
|
tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
|
|
depends on I2C
|
|
help
|
|
Say yes here to provide access to several register-oriented
|
|
SMBus I/O expanders, made mostly by NXP or TI. Compatible
|
|
models include:
|
|
|
|
4 bits: pca9536, pca9537
|
|
|
|
8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
|
|
pca9556, pca9557, pca9574, tca6408, xra1202
|
|
|
|
16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
|
|
tca6416
|
|
|
|
24 bits: tca6424
|
|
|
|
40 bits: pca9505, pca9698
|
|
|
|
config GPIO_PCA953X_IRQ
|
|
bool "Interrupt controller support for PCA953x"
|
|
depends on GPIO_PCA953X=y
|
|
select GPIOLIB_IRQCHIP
|
|
help
|
|
Say yes here to enable the pca953x to be used as an interrupt
|
|
controller. It requires the driver to be built in the kernel.
|
|
|
|
config GPIO_PCF857X
|
|
tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
|
|
depends on I2C
|
|
select IRQ_DOMAIN
|
|
help
|
|
Say yes here to provide access to most "quasi-bidirectional" I2C
|
|
GPIO expanders used for additional digital outputs or inputs.
|
|
Most of these parts are from NXP, though TI is a second source for
|
|
some of them. Compatible models include:
|
|
|
|
8 bits: pcf8574, pcf8574a, pca8574, pca8574a,
|
|
pca9670, pca9672, pca9674, pca9674a,
|
|
max7328, max7329
|
|
|
|
16 bits: pcf8575, pcf8575c, pca8575,
|
|
pca9671, pca9673, pca9675
|
|
|
|
Your board setup code will need to declare the expanders in
|
|
use, and assign numbers to the GPIOs they expose. Those GPIOs
|
|
can then be used from drivers and other kernel code, just like
|
|
other GPIOs, but only accessible from task contexts.
|
|
|
|
This driver provides an in-kernel interface to those GPIOs using
|
|
platform-neutral GPIO calls.
|
|
|
|
config GPIO_RC5T583
|
|
bool "RICOH RC5T583 GPIO"
|
|
depends on MFD_RC5T583
|
|
help
|
|
Select this option to enable GPIO driver for the Ricoh RC5T583
|
|
chip family.
|
|
This driver provides the support for driving/reading the gpio pins
|
|
of RC5T583 device through standard gpio library.
|
|
|
|
config GPIO_SX150X
|
|
bool "Semtech SX150x I2C GPIO expander"
|
|
depends on I2C=y
|
|
default n
|
|
help
|
|
Say yes here to provide support for Semtech SX150-series I2C
|
|
GPIO expanders. Compatible models include:
|
|
|
|
8 bits: sx1508q
|
|
16 bits: sx1509q
|
|
|
|
config GPIO_STMPE
|
|
bool "STMPE GPIOs"
|
|
depends on MFD_STMPE
|
|
select GPIOLIB_IRQCHIP
|
|
help
|
|
This enables support for the GPIOs found on the STMPE I/O
|
|
Expanders.
|
|
|
|
config GPIO_STP_XWAY
|
|
bool "XWAY STP GPIOs"
|
|
depends on SOC_XWAY
|
|
help
|
|
This enables support for the Serial To Parallel (STP) unit found on
|
|
XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
|
|
that can be up to 24 bit. This peripheral is aimed at driving leds.
|
|
Some of the gpios/leds can be auto updated by the soc with dsl and
|
|
phy status.
|
|
|
|
config GPIO_TC3589X
|
|
bool "TC3589X GPIOs"
|
|
depends on MFD_TC3589X
|
|
select GPIOLIB_IRQCHIP
|
|
help
|
|
This enables support for the GPIOs found on the TC3589X
|
|
I/O Expander.
|
|
|
|
config GPIO_TPS65912
|
|
tristate "TI TPS65912 GPIO"
|
|
depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
|
|
help
|
|
This driver supports TPS65912 gpio chip
|
|
|
|
config GPIO_TWL4030
|
|
tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
|
|
depends on TWL4030_CORE
|
|
help
|
|
Say yes here to access the GPIO signals of various multi-function
|
|
power management chips from Texas Instruments.
|
|
|
|
config GPIO_TWL6040
|
|
tristate "TWL6040 GPO"
|
|
depends on TWL6040_CORE
|
|
help
|
|
Say yes here to access the GPO signals of twl6040
|
|
audio chip from Texas Instruments.
|
|
|
|
config GPIO_WM831X
|
|
tristate "WM831x GPIOs"
|
|
depends on MFD_WM831X
|
|
help
|
|
Say yes here to access the GPIO signals of WM831x power management
|
|
chips from Wolfson Microelectronics.
|
|
|
|
config GPIO_WM8350
|
|
tristate "WM8350 GPIOs"
|
|
depends on MFD_WM8350
|
|
help
|
|
Say yes here to access the GPIO signals of WM8350 power management
|
|
chips from Wolfson Microelectronics.
|
|
|
|
config GPIO_WM8994
|
|
tristate "WM8994 GPIOs"
|
|
depends on MFD_WM8994
|
|
help
|
|
Say yes here to access the GPIO signals of WM8994 audio hub
|
|
CODECs from Wolfson Microelectronics.
|
|
|
|
config GPIO_ADP5520
|
|
tristate "GPIO Support for ADP5520 PMIC"
|
|
depends on PMIC_ADP5520
|
|
help
|
|
This option enables support for on-chip GPIO found
|
|
on Analog Devices ADP5520 PMICs.
|
|
|
|
config GPIO_ADP5588
|
|
tristate "ADP5588 I2C GPIO expander"
|
|
depends on I2C
|
|
help
|
|
This option enables support for 18 GPIOs found
|
|
on Analog Devices ADP5588 GPIO Expanders.
|
|
|
|
config GPIO_ADP5588_IRQ
|
|
bool "Interrupt controller support for ADP5588"
|
|
depends on GPIO_ADP5588=y
|
|
help
|
|
Say yes here to enable the adp5588 to be used as an interrupt
|
|
controller. It requires the driver to be built in the kernel.
|
|
|
|
config GPIO_ADNP
|
|
tristate "Avionic Design N-bit GPIO expander"
|
|
depends on I2C && OF_GPIO
|
|
select GPIOLIB_IRQCHIP
|
|
help
|
|
This option enables support for N GPIOs found on Avionic Design
|
|
I2C GPIO expanders. The register space will be extended by powers
|
|
of two, so the controller will need to accommodate for that. For
|
|
example: if a controller provides 48 pins, 6 registers will be
|
|
enough to represent all pins, but the driver will assume a
|
|
register layout for 64 pins (8 registers).
|
|
|
|
comment "PCI GPIO expanders:"
|
|
|
|
config GPIO_CS5535
|
|
tristate "AMD CS5535/CS5536 GPIO support"
|
|
depends on MFD_CS5535
|
|
help
|
|
The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
|
|
can be used for quite a number of things. The CS5535/6 is found on
|
|
AMD Geode and Lemote Yeeloong devices.
|
|
|
|
If unsure, say N.
|
|
|
|
config GPIO_BT8XX
|
|
tristate "BT8XX GPIO abuser"
|
|
depends on PCI && VIDEO_BT848=n
|
|
help
|
|
The BT8xx frame grabber chip has 24 GPIO pins that can be abused
|
|
as a cheap PCI GPIO card.
|
|
|
|
This chip can be found on Miro, Hauppauge and STB TV-cards.
|
|
|
|
The card needs to be physically altered for using it as a
|
|
GPIO card. For more information on how to build a GPIO card
|
|
from a BT8xx TV card, see the documentation file at
|
|
Documentation/bt8xxgpio.txt
|
|
|
|
If unsure, say N.
|
|
|
|
config GPIO_AMD8111
|
|
tristate "AMD 8111 GPIO driver"
|
|
depends on PCI
|
|
help
|
|
The AMD 8111 south bridge contains 32 GPIO pins which can be used.
|
|
|
|
Note, that usually system firmware/ACPI handles GPIO pins on their
|
|
own and users might easily break their systems with uncarefull usage
|
|
of this driver!
|
|
|
|
If unsure, say N
|
|
|
|
config GPIO_INTEL_MID
|
|
bool "Intel Mid GPIO support"
|
|
depends on PCI && X86
|
|
select GPIOLIB_IRQCHIP
|
|
help
|
|
Say Y here to support Intel Mid GPIO.
|
|
|
|
config GPIO_PCH
|
|
tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
|
|
depends on PCI && (X86_32 || COMPILE_TEST)
|
|
select GENERIC_IRQ_CHIP
|
|
help
|
|
This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
|
|
which is an IOH(Input/Output Hub) for x86 embedded processor.
|
|
This driver can access PCH GPIO device.
|
|
|
|
This driver also can be used for LAPIS Semiconductor IOH(Input/
|
|
Output Hub), ML7223 and ML7831.
|
|
ML7223 IOH is for MP(Media Phone) use.
|
|
ML7831 IOH is for general purpose use.
|
|
ML7223/ML7831 is companion chip for Intel Atom E6xx series.
|
|
ML7223/ML7831 is completely compatible for Intel EG20T PCH.
|
|
|
|
config GPIO_ML_IOH
|
|
tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
|
|
depends on PCI
|
|
select GENERIC_IRQ_CHIP
|
|
help
|
|
ML7213 is companion chip for Intel Atom E6xx series.
|
|
This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
|
|
Hub) which is for IVI(In-Vehicle Infotainment) use.
|
|
This driver can access the IOH's GPIO device.
|
|
|
|
config GPIO_SODAVILLE
|
|
bool "Intel Sodaville GPIO support"
|
|
depends on X86 && PCI && OF
|
|
select GPIO_GENERIC
|
|
select GENERIC_IRQ_CHIP
|
|
help
|
|
Say Y here to support Intel Sodaville GPIO.
|
|
|
|
config GPIO_TIMBERDALE
|
|
bool "Support for timberdale GPIO IP"
|
|
depends on MFD_TIMBERDALE
|
|
---help---
|
|
Add support for the GPIO IP in the timberdale FPGA.
|
|
|
|
config GPIO_RDC321X
|
|
tristate "RDC R-321x GPIO support"
|
|
depends on PCI
|
|
select MFD_CORE
|
|
select MFD_RDC321X
|
|
help
|
|
Support for the RDC R321x SoC GPIOs over southbridge
|
|
PCI configuration space.
|
|
|
|
comment "SPI GPIO expanders:"
|
|
|
|
config GPIO_MAX7301
|
|
tristate "Maxim MAX7301 GPIO expander"
|
|
depends on SPI_MASTER
|
|
select GPIO_MAX730X
|
|
help
|
|
GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
|
|
|
|
config GPIO_MCP23S08
|
|
tristate "Microchip MCP23xxx I/O expander"
|
|
depends on (SPI_MASTER && !I2C) || I2C
|
|
help
|
|
SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
|
|
I/O expanders.
|
|
This provides a GPIO interface supporting inputs and outputs.
|
|
The I2C versions of the chips can be used as interrupt-controller.
|
|
|
|
config GPIO_MC33880
|
|
tristate "Freescale MC33880 high-side/low-side switch"
|
|
depends on SPI_MASTER
|
|
help
|
|
SPI driver for Freescale MC33880 high-side/low-side switch.
|
|
This provides GPIO interface supporting inputs and outputs.
|
|
|
|
config GPIO_74X164
|
|
tristate "74x164 serial-in/parallel-out 8-bits shift register"
|
|
depends on SPI_MASTER && OF
|
|
help
|
|
Driver for 74x164 compatible serial-in/parallel-out 8-outputs
|
|
shift registers. This driver can be used to provide access
|
|
to more gpio outputs.
|
|
|
|
comment "AC97 GPIO expanders:"
|
|
|
|
config GPIO_UCB1400
|
|
tristate "Philips UCB1400 GPIO"
|
|
depends on UCB1400_CORE
|
|
help
|
|
This enables support for the Philips UCB1400 GPIO pins.
|
|
The UCB1400 is an AC97 audio codec.
|
|
|
|
comment "LPC GPIO expanders:"
|
|
|
|
config GPIO_KEMPLD
|
|
tristate "Kontron ETX / COMexpress GPIO"
|
|
depends on MFD_KEMPLD
|
|
help
|
|
This enables support for the PLD GPIO interface on some Kontron ETX
|
|
and COMexpress (ETXexpress) modules.
|
|
|
|
This driver can also be built as a module. If so, the module will be
|
|
called gpio-kempld.
|
|
|
|
comment "MODULbus GPIO expanders:"
|
|
|
|
config GPIO_JANZ_TTL
|
|
tristate "Janz VMOD-TTL Digital IO Module"
|
|
depends on MFD_JANZ_CMODIO
|
|
help
|
|
This enables support for the Janz VMOD-TTL Digital IO module.
|
|
This driver provides support for driving the pins in output
|
|
mode only. Input mode is not supported.
|
|
|
|
config GPIO_PALMAS
|
|
bool "TI PALMAS series PMICs GPIO"
|
|
depends on MFD_PALMAS
|
|
help
|
|
Select this option to enable GPIO driver for the TI PALMAS
|
|
series chip family.
|
|
|
|
config GPIO_TPS6586X
|
|
bool "TPS6586X GPIO"
|
|
depends on MFD_TPS6586X
|
|
help
|
|
Select this option to enable GPIO driver for the TPS6586X
|
|
chip family.
|
|
|
|
config GPIO_TPS65910
|
|
bool "TPS65910 GPIO"
|
|
depends on MFD_TPS65910
|
|
help
|
|
Select this option to enable GPIO driver for the TPS65910
|
|
chip family.
|
|
|
|
config GPIO_MSIC
|
|
bool "Intel MSIC mixed signal gpio support"
|
|
depends on MFD_INTEL_MSIC
|
|
help
|
|
Enable support for GPIO on intel MSIC controllers found in
|
|
intel MID devices
|
|
|
|
config GPIO_BCM_KONA
|
|
bool "Broadcom Kona GPIO"
|
|
depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
|
|
help
|
|
Turn on GPIO support for Broadcom "Kona" chips.
|
|
|
|
comment "USB GPIO expanders:"
|
|
|
|
config GPIO_VIPERBOARD
|
|
tristate "Viperboard GPIO a & b support"
|
|
depends on MFD_VIPERBOARD && USB
|
|
help
|
|
Say yes here to access the GPIO signals of Nano River
|
|
Technologies Viperboard. There are two GPIO chips on the
|
|
board: gpioa and gpiob.
|
|
See viperboard API specification and Nano
|
|
River Tech's viperboard.h for detailed meaning
|
|
of the module parameters.
|
|
|
|
endif
|