453 строки
13 KiB
C
453 строки
13 KiB
C
/*
|
|
* esb2rom.c
|
|
*
|
|
* Normal mappings of flash chips in physical memory
|
|
* through the Intel ESB2 Southbridge.
|
|
*
|
|
* This was derived from ichxrom.c in May 2006 by
|
|
* Lew Glendenning <lglendenning@lnxi.com>
|
|
*
|
|
* Eric Biederman, of course, was a major help in this effort.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/io.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/map.h>
|
|
#include <linux/mtd/cfi.h>
|
|
#include <linux/mtd/flashchip.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_ids.h>
|
|
#include <linux/list.h>
|
|
|
|
#define MOD_NAME KBUILD_BASENAME
|
|
|
|
#define ADDRESS_NAME_LEN 18
|
|
|
|
#define ROM_PROBE_STEP_SIZE (64*1024) /* 64KiB */
|
|
|
|
#define BIOS_CNTL 0xDC
|
|
#define BIOS_LOCK_ENABLE 0x02
|
|
#define BIOS_WRITE_ENABLE 0x01
|
|
|
|
/* This became a 16-bit register, and EN2 has disappeared */
|
|
#define FWH_DEC_EN1 0xD8
|
|
#define FWH_F8_EN 0x8000
|
|
#define FWH_F0_EN 0x4000
|
|
#define FWH_E8_EN 0x2000
|
|
#define FWH_E0_EN 0x1000
|
|
#define FWH_D8_EN 0x0800
|
|
#define FWH_D0_EN 0x0400
|
|
#define FWH_C8_EN 0x0200
|
|
#define FWH_C0_EN 0x0100
|
|
#define FWH_LEGACY_F_EN 0x0080
|
|
#define FWH_LEGACY_E_EN 0x0040
|
|
/* reserved 0x0020 and 0x0010 */
|
|
#define FWH_70_EN 0x0008
|
|
#define FWH_60_EN 0x0004
|
|
#define FWH_50_EN 0x0002
|
|
#define FWH_40_EN 0x0001
|
|
|
|
/* these are 32-bit values */
|
|
#define FWH_SEL1 0xD0
|
|
#define FWH_SEL2 0xD4
|
|
|
|
#define FWH_8MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
|
|
FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
|
|
FWH_70_EN | FWH_60_EN | FWH_50_EN | FWH_40_EN)
|
|
|
|
#define FWH_7MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
|
|
FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
|
|
FWH_70_EN | FWH_60_EN | FWH_50_EN)
|
|
|
|
#define FWH_6MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
|
|
FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
|
|
FWH_70_EN | FWH_60_EN)
|
|
|
|
#define FWH_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
|
|
FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
|
|
FWH_70_EN)
|
|
|
|
#define FWH_4MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
|
|
FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN)
|
|
|
|
#define FWH_3_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
|
|
FWH_D8_EN | FWH_D0_EN | FWH_C8_EN)
|
|
|
|
#define FWH_3MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
|
|
FWH_D8_EN | FWH_D0_EN)
|
|
|
|
#define FWH_2_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
|
|
FWH_D8_EN)
|
|
|
|
#define FWH_2MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN)
|
|
|
|
#define FWH_1_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN)
|
|
|
|
#define FWH_1MiB (FWH_F8_EN | FWH_F0_EN)
|
|
|
|
#define FWH_0_5MiB (FWH_F8_EN)
|
|
|
|
|
|
struct esb2rom_window {
|
|
void __iomem* virt;
|
|
unsigned long phys;
|
|
unsigned long size;
|
|
struct list_head maps;
|
|
struct resource rsrc;
|
|
struct pci_dev *pdev;
|
|
};
|
|
|
|
struct esb2rom_map_info {
|
|
struct list_head list;
|
|
struct map_info map;
|
|
struct mtd_info *mtd;
|
|
struct resource rsrc;
|
|
char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN];
|
|
};
|
|
|
|
static struct esb2rom_window esb2rom_window = {
|
|
.maps = LIST_HEAD_INIT(esb2rom_window.maps),
|
|
};
|
|
|
|
static void esb2rom_cleanup(struct esb2rom_window *window)
|
|
{
|
|
struct esb2rom_map_info *map, *scratch;
|
|
u8 byte;
|
|
|
|
/* Disable writes through the rom window */
|
|
pci_read_config_byte(window->pdev, BIOS_CNTL, &byte);
|
|
pci_write_config_byte(window->pdev, BIOS_CNTL,
|
|
byte & ~BIOS_WRITE_ENABLE);
|
|
|
|
/* Free all of the mtd devices */
|
|
list_for_each_entry_safe(map, scratch, &window->maps, list) {
|
|
if (map->rsrc.parent)
|
|
release_resource(&map->rsrc);
|
|
mtd_device_unregister(map->mtd);
|
|
map_destroy(map->mtd);
|
|
list_del(&map->list);
|
|
kfree(map);
|
|
}
|
|
if (window->rsrc.parent)
|
|
release_resource(&window->rsrc);
|
|
if (window->virt) {
|
|
iounmap(window->virt);
|
|
window->virt = NULL;
|
|
window->phys = 0;
|
|
window->size = 0;
|
|
}
|
|
pci_dev_put(window->pdev);
|
|
}
|
|
|
|
static int esb2rom_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
|
|
struct esb2rom_window *window = &esb2rom_window;
|
|
struct esb2rom_map_info *map = NULL;
|
|
unsigned long map_top;
|
|
u8 byte;
|
|
u16 word;
|
|
|
|
/* For now I just handle the ecb2 and I assume there
|
|
* are not a lot of resources up at the top of the address
|
|
* space. It is possible to handle other devices in the
|
|
* top 16MiB but it is very painful. Also since
|
|
* you can only really attach a FWH to an ICHX there
|
|
* a number of simplifications you can make.
|
|
*
|
|
* Also you can page firmware hubs if an 8MiB window isn't enough
|
|
* but don't currently handle that case either.
|
|
*/
|
|
window->pdev = pci_dev_get(pdev);
|
|
|
|
/* RLG: experiment 2. Force the window registers to the widest values */
|
|
|
|
/*
|
|
pci_read_config_word(pdev, FWH_DEC_EN1, &word);
|
|
printk(KERN_DEBUG "Original FWH_DEC_EN1 : %x\n", word);
|
|
pci_write_config_byte(pdev, FWH_DEC_EN1, 0xff);
|
|
pci_read_config_byte(pdev, FWH_DEC_EN1, &byte);
|
|
printk(KERN_DEBUG "New FWH_DEC_EN1 : %x\n", byte);
|
|
|
|
pci_read_config_byte(pdev, FWH_DEC_EN2, &byte);
|
|
printk(KERN_DEBUG "Original FWH_DEC_EN2 : %x\n", byte);
|
|
pci_write_config_byte(pdev, FWH_DEC_EN2, 0x0f);
|
|
pci_read_config_byte(pdev, FWH_DEC_EN2, &byte);
|
|
printk(KERN_DEBUG "New FWH_DEC_EN2 : %x\n", byte);
|
|
*/
|
|
|
|
/* Find a region continuous to the end of the ROM window */
|
|
window->phys = 0;
|
|
pci_read_config_word(pdev, FWH_DEC_EN1, &word);
|
|
printk(KERN_DEBUG "pci_read_config_word : %x\n", word);
|
|
|
|
if ((word & FWH_8MiB) == FWH_8MiB)
|
|
window->phys = 0xff400000;
|
|
else if ((word & FWH_7MiB) == FWH_7MiB)
|
|
window->phys = 0xff500000;
|
|
else if ((word & FWH_6MiB) == FWH_6MiB)
|
|
window->phys = 0xff600000;
|
|
else if ((word & FWH_5MiB) == FWH_5MiB)
|
|
window->phys = 0xFF700000;
|
|
else if ((word & FWH_4MiB) == FWH_4MiB)
|
|
window->phys = 0xffc00000;
|
|
else if ((word & FWH_3_5MiB) == FWH_3_5MiB)
|
|
window->phys = 0xffc80000;
|
|
else if ((word & FWH_3MiB) == FWH_3MiB)
|
|
window->phys = 0xffd00000;
|
|
else if ((word & FWH_2_5MiB) == FWH_2_5MiB)
|
|
window->phys = 0xffd80000;
|
|
else if ((word & FWH_2MiB) == FWH_2MiB)
|
|
window->phys = 0xffe00000;
|
|
else if ((word & FWH_1_5MiB) == FWH_1_5MiB)
|
|
window->phys = 0xffe80000;
|
|
else if ((word & FWH_1MiB) == FWH_1MiB)
|
|
window->phys = 0xfff00000;
|
|
else if ((word & FWH_0_5MiB) == FWH_0_5MiB)
|
|
window->phys = 0xfff80000;
|
|
|
|
if (window->phys == 0) {
|
|
printk(KERN_ERR MOD_NAME ": Rom window is closed\n");
|
|
goto out;
|
|
}
|
|
|
|
/* reserved 0x0020 and 0x0010 */
|
|
window->phys -= 0x400000UL;
|
|
window->size = (0xffffffffUL - window->phys) + 1UL;
|
|
|
|
/* Enable writes through the rom window */
|
|
pci_read_config_byte(pdev, BIOS_CNTL, &byte);
|
|
if (!(byte & BIOS_WRITE_ENABLE) && (byte & (BIOS_LOCK_ENABLE))) {
|
|
/* The BIOS will generate an error if I enable
|
|
* this device, so don't even try.
|
|
*/
|
|
printk(KERN_ERR MOD_NAME ": firmware access control, I can't enable writes\n");
|
|
goto out;
|
|
}
|
|
pci_write_config_byte(pdev, BIOS_CNTL, byte | BIOS_WRITE_ENABLE);
|
|
|
|
/*
|
|
* Try to reserve the window mem region. If this fails then
|
|
* it is likely due to the window being "reseved" by the BIOS.
|
|
*/
|
|
window->rsrc.name = MOD_NAME;
|
|
window->rsrc.start = window->phys;
|
|
window->rsrc.end = window->phys + window->size - 1;
|
|
window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
|
|
if (request_resource(&iomem_resource, &window->rsrc)) {
|
|
window->rsrc.parent = NULL;
|
|
printk(KERN_DEBUG MOD_NAME ": "
|
|
"%s(): Unable to register resource %pR - kernel bug?\n",
|
|
__func__, &window->rsrc);
|
|
}
|
|
|
|
/* Map the firmware hub into my address space. */
|
|
window->virt = ioremap_nocache(window->phys, window->size);
|
|
if (!window->virt) {
|
|
printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n",
|
|
window->phys, window->size);
|
|
goto out;
|
|
}
|
|
|
|
/* Get the first address to look for an rom chip at */
|
|
map_top = window->phys;
|
|
if ((window->phys & 0x3fffff) != 0) {
|
|
/* if not aligned on 4MiB, look 4MiB lower in address space */
|
|
map_top = window->phys + 0x400000;
|
|
}
|
|
#if 1
|
|
/* The probe sequence run over the firmware hub lock
|
|
* registers sets them to 0x7 (no access).
|
|
* (Insane hardware design, but most copied Intel's.)
|
|
* ==> Probe at most the last 4M of the address space.
|
|
*/
|
|
if (map_top < 0xffc00000)
|
|
map_top = 0xffc00000;
|
|
#endif
|
|
/* Loop through and look for rom chips */
|
|
while ((map_top - 1) < 0xffffffffUL) {
|
|
struct cfi_private *cfi;
|
|
unsigned long offset;
|
|
int i;
|
|
|
|
if (!map)
|
|
map = kmalloc(sizeof(*map), GFP_KERNEL);
|
|
if (!map) {
|
|
printk(KERN_ERR MOD_NAME ": kmalloc failed");
|
|
goto out;
|
|
}
|
|
memset(map, 0, sizeof(*map));
|
|
INIT_LIST_HEAD(&map->list);
|
|
map->map.name = map->map_name;
|
|
map->map.phys = map_top;
|
|
offset = map_top - window->phys;
|
|
map->map.virt = (void __iomem *)
|
|
(((unsigned long)(window->virt)) + offset);
|
|
map->map.size = 0xffffffffUL - map_top + 1UL;
|
|
/* Set the name of the map to the address I am trying */
|
|
sprintf(map->map_name, "%s @%08Lx",
|
|
MOD_NAME, (unsigned long long)map->map.phys);
|
|
|
|
/* Firmware hubs only use vpp when being programmed
|
|
* in a factory setting. So in-place programming
|
|
* needs to use a different method.
|
|
*/
|
|
for(map->map.bankwidth = 32; map->map.bankwidth;
|
|
map->map.bankwidth >>= 1) {
|
|
char **probe_type;
|
|
/* Skip bankwidths that are not supported */
|
|
if (!map_bankwidth_supported(map->map.bankwidth))
|
|
continue;
|
|
|
|
/* Setup the map methods */
|
|
simple_map_init(&map->map);
|
|
|
|
/* Try all of the probe methods */
|
|
probe_type = rom_probe_types;
|
|
for(; *probe_type; probe_type++) {
|
|
map->mtd = do_map_probe(*probe_type, &map->map);
|
|
if (map->mtd)
|
|
goto found;
|
|
}
|
|
}
|
|
map_top += ROM_PROBE_STEP_SIZE;
|
|
continue;
|
|
found:
|
|
/* Trim the size if we are larger than the map */
|
|
if (map->mtd->size > map->map.size) {
|
|
printk(KERN_WARNING MOD_NAME
|
|
" rom(%llu) larger than window(%lu). fixing...\n",
|
|
(unsigned long long)map->mtd->size, map->map.size);
|
|
map->mtd->size = map->map.size;
|
|
}
|
|
if (window->rsrc.parent) {
|
|
/*
|
|
* Registering the MTD device in iomem may not be possible
|
|
* if there is a BIOS "reserved" and BUSY range. If this
|
|
* fails then continue anyway.
|
|
*/
|
|
map->rsrc.name = map->map_name;
|
|
map->rsrc.start = map->map.phys;
|
|
map->rsrc.end = map->map.phys + map->mtd->size - 1;
|
|
map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
|
|
if (request_resource(&window->rsrc, &map->rsrc)) {
|
|
printk(KERN_ERR MOD_NAME
|
|
": cannot reserve MTD resource\n");
|
|
map->rsrc.parent = NULL;
|
|
}
|
|
}
|
|
|
|
/* Make the whole region visible in the map */
|
|
map->map.virt = window->virt;
|
|
map->map.phys = window->phys;
|
|
cfi = map->map.fldrv_priv;
|
|
for(i = 0; i < cfi->numchips; i++)
|
|
cfi->chips[i].start += offset;
|
|
|
|
/* Now that the mtd devices is complete claim and export it */
|
|
map->mtd->owner = THIS_MODULE;
|
|
if (mtd_device_register(map->mtd, NULL, 0)) {
|
|
map_destroy(map->mtd);
|
|
map->mtd = NULL;
|
|
goto out;
|
|
}
|
|
|
|
/* Calculate the new value of map_top */
|
|
map_top += map->mtd->size;
|
|
|
|
/* File away the map structure */
|
|
list_add(&map->list, &window->maps);
|
|
map = NULL;
|
|
}
|
|
|
|
out:
|
|
/* Free any left over map structures */
|
|
kfree(map);
|
|
|
|
/* See if I have any map structures */
|
|
if (list_empty(&window->maps)) {
|
|
esb2rom_cleanup(window);
|
|
return -ENODEV;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void esb2rom_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct esb2rom_window *window = &esb2rom_window;
|
|
esb2rom_cleanup(window);
|
|
}
|
|
|
|
static struct pci_device_id esb2rom_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0,
|
|
PCI_ANY_ID, PCI_ANY_ID, },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
|
|
PCI_ANY_ID, PCI_ANY_ID, },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
|
|
PCI_ANY_ID, PCI_ANY_ID, },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
|
|
PCI_ANY_ID, PCI_ANY_ID, },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
|
|
PCI_ANY_ID, PCI_ANY_ID, },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
|
|
PCI_ANY_ID, PCI_ANY_ID, },
|
|
{ 0, },
|
|
};
|
|
|
|
#if 0
|
|
MODULE_DEVICE_TABLE(pci, esb2rom_pci_tbl);
|
|
|
|
static struct pci_driver esb2rom_driver = {
|
|
.name = MOD_NAME,
|
|
.id_table = esb2rom_pci_tbl,
|
|
.probe = esb2rom_init_one,
|
|
.remove = esb2rom_remove_one,
|
|
};
|
|
#endif
|
|
|
|
static int __init init_esb2rom(void)
|
|
{
|
|
struct pci_dev *pdev;
|
|
struct pci_device_id *id;
|
|
int retVal;
|
|
|
|
pdev = NULL;
|
|
for (id = esb2rom_pci_tbl; id->vendor; id++) {
|
|
printk(KERN_DEBUG "device id = %x\n", id->device);
|
|
pdev = pci_get_device(id->vendor, id->device, NULL);
|
|
if (pdev) {
|
|
printk(KERN_DEBUG "matched device = %x\n", id->device);
|
|
break;
|
|
}
|
|
}
|
|
if (pdev) {
|
|
printk(KERN_DEBUG "matched device id %x\n", id->device);
|
|
retVal = esb2rom_init_one(pdev, &esb2rom_pci_tbl[0]);
|
|
pci_dev_put(pdev);
|
|
printk(KERN_DEBUG "retVal = %d\n", retVal);
|
|
return retVal;
|
|
}
|
|
return -ENXIO;
|
|
#if 0
|
|
return pci_register_driver(&esb2rom_driver);
|
|
#endif
|
|
}
|
|
|
|
static void __exit cleanup_esb2rom(void)
|
|
{
|
|
esb2rom_remove_one(esb2rom_window.pdev);
|
|
}
|
|
|
|
module_init(init_esb2rom);
|
|
module_exit(cleanup_esb2rom);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Lew Glendenning <lglendenning@lnxi.com>");
|
|
MODULE_DESCRIPTION("MTD map driver for BIOS chips on the ESB2 southbridge");
|