540 строки
13 KiB
C
540 строки
13 KiB
C
/*
|
|
* twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
|
|
*
|
|
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* Author: Hema HK <hemahk@ti.com>
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/i2c/twl.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/err.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
|
|
/* usb register definitions */
|
|
#define USB_VENDOR_ID_LSB 0x00
|
|
#define USB_VENDOR_ID_MSB 0x01
|
|
#define USB_PRODUCT_ID_LSB 0x02
|
|
#define USB_PRODUCT_ID_MSB 0x03
|
|
#define USB_VBUS_CTRL_SET 0x04
|
|
#define USB_VBUS_CTRL_CLR 0x05
|
|
#define USB_ID_CTRL_SET 0x06
|
|
#define USB_ID_CTRL_CLR 0x07
|
|
#define USB_VBUS_INT_SRC 0x08
|
|
#define USB_VBUS_INT_LATCH_SET 0x09
|
|
#define USB_VBUS_INT_LATCH_CLR 0x0A
|
|
#define USB_VBUS_INT_EN_LO_SET 0x0B
|
|
#define USB_VBUS_INT_EN_LO_CLR 0x0C
|
|
#define USB_VBUS_INT_EN_HI_SET 0x0D
|
|
#define USB_VBUS_INT_EN_HI_CLR 0x0E
|
|
#define USB_ID_INT_SRC 0x0F
|
|
#define USB_ID_INT_LATCH_SET 0x10
|
|
#define USB_ID_INT_LATCH_CLR 0x11
|
|
|
|
#define USB_ID_INT_EN_LO_SET 0x12
|
|
#define USB_ID_INT_EN_LO_CLR 0x13
|
|
#define USB_ID_INT_EN_HI_SET 0x14
|
|
#define USB_ID_INT_EN_HI_CLR 0x15
|
|
#define USB_OTG_ADP_CTRL 0x16
|
|
#define USB_OTG_ADP_HIGH 0x17
|
|
#define USB_OTG_ADP_LOW 0x18
|
|
#define USB_OTG_ADP_RISE 0x19
|
|
#define USB_OTG_REVISION 0x1A
|
|
|
|
/* to be moved to LDO */
|
|
#define TWL6030_MISC2 0xE5
|
|
#define TWL6030_CFG_LDO_PD2 0xF5
|
|
#define TWL6030_BACKUP_REG 0xFA
|
|
|
|
#define STS_HW_CONDITIONS 0x21
|
|
|
|
/* In module TWL6030_MODULE_PM_MASTER */
|
|
#define STS_HW_CONDITIONS 0x21
|
|
#define STS_USB_ID BIT(2)
|
|
|
|
/* In module TWL6030_MODULE_PM_RECEIVER */
|
|
#define VUSB_CFG_TRANS 0x71
|
|
#define VUSB_CFG_STATE 0x72
|
|
#define VUSB_CFG_VOLTAGE 0x73
|
|
|
|
/* in module TWL6030_MODULE_MAIN_CHARGE */
|
|
|
|
#define CHARGERUSB_CTRL1 0x8
|
|
|
|
#define CONTROLLER_STAT1 0x03
|
|
#define VBUS_DET BIT(2)
|
|
|
|
struct twl6030_usb {
|
|
struct usb_phy phy;
|
|
struct device *dev;
|
|
|
|
/* for vbus reporting with irqs disabled */
|
|
spinlock_t lock;
|
|
|
|
struct regulator *usb3v3;
|
|
|
|
/* used to set vbus, in atomic path */
|
|
struct work_struct set_vbus_work;
|
|
|
|
int irq1;
|
|
int irq2;
|
|
u8 linkstat;
|
|
u8 asleep;
|
|
bool irq_enabled;
|
|
bool vbus_enable;
|
|
unsigned long features;
|
|
};
|
|
|
|
#define phy_to_twl(x) container_of((x), struct twl6030_usb, phy)
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module,
|
|
u8 data, u8 address)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = twl_i2c_write_u8(module, data, address);
|
|
if (ret < 0)
|
|
dev_err(twl->dev,
|
|
"Write[0x%x] Error %d\n", address, ret);
|
|
return ret;
|
|
}
|
|
|
|
static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
|
|
{
|
|
u8 data, ret = 0;
|
|
|
|
ret = twl_i2c_read_u8(module, &data, address);
|
|
if (ret >= 0)
|
|
ret = data;
|
|
else
|
|
dev_err(twl->dev,
|
|
"readb[0x%x,0x%x] Error %d\n",
|
|
module, address, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int twl6030_phy_init(struct usb_phy *x)
|
|
{
|
|
struct twl6030_usb *twl;
|
|
struct device *dev;
|
|
struct twl4030_usb_data *pdata;
|
|
|
|
twl = phy_to_twl(x);
|
|
dev = twl->dev;
|
|
pdata = dev->platform_data;
|
|
|
|
if (twl->linkstat == USB_EVENT_ID)
|
|
pdata->phy_power(twl->dev, 1, 1);
|
|
else
|
|
pdata->phy_power(twl->dev, 0, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void twl6030_phy_shutdown(struct usb_phy *x)
|
|
{
|
|
struct twl6030_usb *twl;
|
|
struct device *dev;
|
|
struct twl4030_usb_data *pdata;
|
|
|
|
twl = phy_to_twl(x);
|
|
dev = twl->dev;
|
|
pdata = dev->platform_data;
|
|
pdata->phy_power(twl->dev, 0, 0);
|
|
}
|
|
|
|
static int twl6030_phy_suspend(struct usb_phy *x, int suspend)
|
|
{
|
|
struct twl6030_usb *twl = phy_to_twl(x);
|
|
struct device *dev = twl->dev;
|
|
struct twl4030_usb_data *pdata = dev->platform_data;
|
|
|
|
pdata->phy_suspend(dev, suspend);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int twl6030_start_srp(struct usb_otg *otg)
|
|
{
|
|
struct twl6030_usb *twl = phy_to_twl(otg->phy);
|
|
|
|
twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET);
|
|
twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET);
|
|
|
|
mdelay(100);
|
|
twl6030_writeb(twl, TWL_MODULE_USB, 0xa0, USB_VBUS_CTRL_CLR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
|
|
{
|
|
char *regulator_name;
|
|
|
|
if (twl->features & TWL6025_SUBCLASS)
|
|
regulator_name = "ldousb";
|
|
else
|
|
regulator_name = "vusb";
|
|
|
|
/* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
|
|
twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG);
|
|
|
|
/* Program CFG_LDO_PD2 register and set VUSB bit */
|
|
twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2);
|
|
|
|
/* Program MISC2 register and set bit VUSB_IN_VBAT */
|
|
twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2);
|
|
|
|
twl->usb3v3 = regulator_get(twl->dev, regulator_name);
|
|
if (IS_ERR(twl->usb3v3))
|
|
return -ENODEV;
|
|
|
|
/* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
|
|
twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
|
|
|
|
/*
|
|
* Program the USB_ID_CTRL_SET register to enable GND drive
|
|
* and the ID comparators
|
|
*/
|
|
twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t twl6030_usb_vbus_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct twl6030_usb *twl = dev_get_drvdata(dev);
|
|
unsigned long flags;
|
|
int ret = -EINVAL;
|
|
|
|
spin_lock_irqsave(&twl->lock, flags);
|
|
|
|
switch (twl->linkstat) {
|
|
case USB_EVENT_VBUS:
|
|
ret = snprintf(buf, PAGE_SIZE, "vbus\n");
|
|
break;
|
|
case USB_EVENT_ID:
|
|
ret = snprintf(buf, PAGE_SIZE, "id\n");
|
|
break;
|
|
case USB_EVENT_NONE:
|
|
ret = snprintf(buf, PAGE_SIZE, "none\n");
|
|
break;
|
|
default:
|
|
ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
|
|
}
|
|
spin_unlock_irqrestore(&twl->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);
|
|
|
|
static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
|
|
{
|
|
struct twl6030_usb *twl = _twl;
|
|
struct usb_otg *otg = twl->phy.otg;
|
|
int status;
|
|
u8 vbus_state, hw_state;
|
|
|
|
hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
|
|
|
|
vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE,
|
|
CONTROLLER_STAT1);
|
|
if (!(hw_state & STS_USB_ID)) {
|
|
if (vbus_state & VBUS_DET) {
|
|
regulator_enable(twl->usb3v3);
|
|
twl->asleep = 1;
|
|
status = USB_EVENT_VBUS;
|
|
otg->default_a = false;
|
|
twl->phy.state = OTG_STATE_B_IDLE;
|
|
twl->linkstat = status;
|
|
twl->phy.last_event = status;
|
|
atomic_notifier_call_chain(&twl->phy.notifier,
|
|
status, otg->gadget);
|
|
} else {
|
|
status = USB_EVENT_NONE;
|
|
twl->linkstat = status;
|
|
twl->phy.last_event = status;
|
|
atomic_notifier_call_chain(&twl->phy.notifier,
|
|
status, otg->gadget);
|
|
if (twl->asleep) {
|
|
regulator_disable(twl->usb3v3);
|
|
twl->asleep = 0;
|
|
}
|
|
}
|
|
}
|
|
sysfs_notify(&twl->dev->kobj, NULL, "vbus");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
|
|
{
|
|
struct twl6030_usb *twl = _twl;
|
|
struct usb_otg *otg = twl->phy.otg;
|
|
int status = USB_EVENT_NONE;
|
|
u8 hw_state;
|
|
|
|
hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
|
|
|
|
if (hw_state & STS_USB_ID) {
|
|
|
|
regulator_enable(twl->usb3v3);
|
|
twl->asleep = 1;
|
|
twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
|
|
twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
|
|
0x10);
|
|
status = USB_EVENT_ID;
|
|
otg->default_a = true;
|
|
twl->phy.state = OTG_STATE_A_IDLE;
|
|
twl->linkstat = status;
|
|
twl->phy.last_event = status;
|
|
atomic_notifier_call_chain(&twl->phy.notifier, status,
|
|
otg->gadget);
|
|
} else {
|
|
twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR,
|
|
0x10);
|
|
twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
|
|
0x1);
|
|
}
|
|
twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int twl6030_set_peripheral(struct usb_otg *otg,
|
|
struct usb_gadget *gadget)
|
|
{
|
|
if (!otg)
|
|
return -ENODEV;
|
|
|
|
otg->gadget = gadget;
|
|
if (!gadget)
|
|
otg->phy->state = OTG_STATE_UNDEFINED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int twl6030_enable_irq(struct usb_phy *x)
|
|
{
|
|
struct twl6030_usb *twl = phy_to_twl(x);
|
|
|
|
twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1);
|
|
twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
|
|
twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
|
|
|
|
twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
|
|
REG_INT_MSK_LINE_C);
|
|
twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
|
|
REG_INT_MSK_STS_C);
|
|
twl6030_usb_irq(twl->irq2, twl);
|
|
twl6030_usbotg_irq(twl->irq1, twl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void otg_set_vbus_work(struct work_struct *data)
|
|
{
|
|
struct twl6030_usb *twl = container_of(data, struct twl6030_usb,
|
|
set_vbus_work);
|
|
|
|
/*
|
|
* Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1
|
|
* register. This enables boost mode.
|
|
*/
|
|
|
|
if (twl->vbus_enable)
|
|
twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40,
|
|
CHARGERUSB_CTRL1);
|
|
else
|
|
twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00,
|
|
CHARGERUSB_CTRL1);
|
|
}
|
|
|
|
static int twl6030_set_vbus(struct usb_otg *otg, bool enabled)
|
|
{
|
|
struct twl6030_usb *twl = phy_to_twl(otg->phy);
|
|
|
|
twl->vbus_enable = enabled;
|
|
schedule_work(&twl->set_vbus_work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int twl6030_set_host(struct usb_otg *otg, struct usb_bus *host)
|
|
{
|
|
if (!otg)
|
|
return -ENODEV;
|
|
|
|
otg->host = host;
|
|
if (!host)
|
|
otg->phy->state = OTG_STATE_UNDEFINED;
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit twl6030_usb_probe(struct platform_device *pdev)
|
|
{
|
|
struct twl6030_usb *twl;
|
|
int status, err;
|
|
struct twl4030_usb_data *pdata;
|
|
struct usb_otg *otg;
|
|
struct device *dev = &pdev->dev;
|
|
pdata = dev->platform_data;
|
|
|
|
twl = kzalloc(sizeof *twl, GFP_KERNEL);
|
|
if (!twl)
|
|
return -ENOMEM;
|
|
|
|
otg = kzalloc(sizeof *otg, GFP_KERNEL);
|
|
if (!otg) {
|
|
kfree(twl);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
twl->dev = &pdev->dev;
|
|
twl->irq1 = platform_get_irq(pdev, 0);
|
|
twl->irq2 = platform_get_irq(pdev, 1);
|
|
twl->features = pdata->features;
|
|
|
|
twl->phy.dev = twl->dev;
|
|
twl->phy.label = "twl6030";
|
|
twl->phy.otg = otg;
|
|
twl->phy.init = twl6030_phy_init;
|
|
twl->phy.shutdown = twl6030_phy_shutdown;
|
|
twl->phy.set_suspend = twl6030_phy_suspend;
|
|
|
|
otg->phy = &twl->phy;
|
|
otg->set_host = twl6030_set_host;
|
|
otg->set_peripheral = twl6030_set_peripheral;
|
|
otg->set_vbus = twl6030_set_vbus;
|
|
otg->start_srp = twl6030_start_srp;
|
|
|
|
/* init spinlock for workqueue */
|
|
spin_lock_init(&twl->lock);
|
|
|
|
err = twl6030_usb_ldo_init(twl);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "ldo init failed\n");
|
|
kfree(otg);
|
|
kfree(twl);
|
|
return err;
|
|
}
|
|
usb_set_transceiver(&twl->phy);
|
|
|
|
platform_set_drvdata(pdev, twl);
|
|
if (device_create_file(&pdev->dev, &dev_attr_vbus))
|
|
dev_warn(&pdev->dev, "could not create sysfs file\n");
|
|
|
|
ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
|
|
|
|
INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);
|
|
|
|
twl->irq_enabled = true;
|
|
status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
|
|
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
|
|
"twl6030_usb", twl);
|
|
if (status < 0) {
|
|
dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
|
|
twl->irq1, status);
|
|
device_remove_file(twl->dev, &dev_attr_vbus);
|
|
kfree(otg);
|
|
kfree(twl);
|
|
return status;
|
|
}
|
|
|
|
status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
|
|
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
|
|
"twl6030_usb", twl);
|
|
if (status < 0) {
|
|
dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
|
|
twl->irq2, status);
|
|
free_irq(twl->irq1, twl);
|
|
device_remove_file(twl->dev, &dev_attr_vbus);
|
|
kfree(otg);
|
|
kfree(twl);
|
|
return status;
|
|
}
|
|
|
|
twl->asleep = 0;
|
|
pdata->phy_init(dev);
|
|
twl6030_phy_suspend(&twl->phy, 0);
|
|
twl6030_enable_irq(&twl->phy);
|
|
dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __exit twl6030_usb_remove(struct platform_device *pdev)
|
|
{
|
|
struct twl6030_usb *twl = platform_get_drvdata(pdev);
|
|
|
|
struct twl4030_usb_data *pdata;
|
|
struct device *dev = &pdev->dev;
|
|
pdata = dev->platform_data;
|
|
|
|
twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
|
|
REG_INT_MSK_LINE_C);
|
|
twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
|
|
REG_INT_MSK_STS_C);
|
|
free_irq(twl->irq1, twl);
|
|
free_irq(twl->irq2, twl);
|
|
regulator_put(twl->usb3v3);
|
|
pdata->phy_exit(twl->dev);
|
|
device_remove_file(twl->dev, &dev_attr_vbus);
|
|
cancel_work_sync(&twl->set_vbus_work);
|
|
kfree(twl->phy.otg);
|
|
kfree(twl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver twl6030_usb_driver = {
|
|
.probe = twl6030_usb_probe,
|
|
.remove = __exit_p(twl6030_usb_remove),
|
|
.driver = {
|
|
.name = "twl6030_usb",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init twl6030_usb_init(void)
|
|
{
|
|
return platform_driver_register(&twl6030_usb_driver);
|
|
}
|
|
subsys_initcall(twl6030_usb_init);
|
|
|
|
static void __exit twl6030_usb_exit(void)
|
|
{
|
|
platform_driver_unregister(&twl6030_usb_driver);
|
|
}
|
|
module_exit(twl6030_usb_exit);
|
|
|
|
MODULE_ALIAS("platform:twl6030_usb");
|
|
MODULE_AUTHOR("Hema HK <hemahk@ti.com>");
|
|
MODULE_DESCRIPTION("TWL6030 USB transceiver driver");
|
|
MODULE_LICENSE("GPL");
|