773 строки
18 KiB
C
773 строки
18 KiB
C
/* linux/arch/arm/mach-s3c2412/clock.c
|
|
*
|
|
* Copyright (c) 2006 Simtec Electronics
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
*
|
|
* S3C2412,S3C2413 Clock control support
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <mach/hardware.h>
|
|
|
|
#include <plat/regs-serial.h>
|
|
#include <mach/regs-clock.h>
|
|
#include <mach/regs-gpio.h>
|
|
|
|
#include <plat/s3c2412.h>
|
|
#include <plat/clock.h>
|
|
#include <plat/cpu.h>
|
|
|
|
/* We currently have to assume that the system is running
|
|
* from the XTPll input, and that all ***REFCLKs are being
|
|
* fed from it, as we cannot read the state of OM[4] from
|
|
* software.
|
|
*
|
|
* It would be possible for each board initialisation to
|
|
* set the correct muxing at initialisation
|
|
*/
|
|
|
|
static int s3c2412_clkcon_enable(struct clk *clk, int enable)
|
|
{
|
|
unsigned int clocks = clk->ctrlbit;
|
|
unsigned long clkcon;
|
|
|
|
clkcon = __raw_readl(S3C2410_CLKCON);
|
|
|
|
if (enable)
|
|
clkcon |= clocks;
|
|
else
|
|
clkcon &= ~clocks;
|
|
|
|
__raw_writel(clkcon, S3C2410_CLKCON);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c2412_upll_enable(struct clk *clk, int enable)
|
|
{
|
|
unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
|
|
unsigned long orig = upllcon;
|
|
|
|
if (!enable)
|
|
upllcon |= S3C2412_PLLCON_OFF;
|
|
else
|
|
upllcon &= ~S3C2412_PLLCON_OFF;
|
|
|
|
__raw_writel(upllcon, S3C2410_UPLLCON);
|
|
|
|
/* allow ~150uS for the PLL to settle and lock */
|
|
|
|
if (enable && (orig & S3C2412_PLLCON_OFF))
|
|
udelay(150);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* clock selections */
|
|
|
|
static struct clk clk_erefclk = {
|
|
.name = "erefclk",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct clk clk_urefclk = {
|
|
.name = "urefclk",
|
|
.id = -1,
|
|
};
|
|
|
|
static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent)
|
|
{
|
|
unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
|
|
|
|
if (parent == &clk_urefclk)
|
|
clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL;
|
|
else if (parent == &clk_upll)
|
|
clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL;
|
|
else
|
|
return -EINVAL;
|
|
|
|
clk->parent = parent;
|
|
|
|
__raw_writel(clksrc, S3C2412_CLKSRC);
|
|
return 0;
|
|
}
|
|
|
|
static struct clk clk_usysclk = {
|
|
.name = "usysclk",
|
|
.id = -1,
|
|
.parent = &clk_xtal,
|
|
.set_parent = s3c2412_setparent_usysclk,
|
|
};
|
|
|
|
static struct clk clk_mrefclk = {
|
|
.name = "mrefclk",
|
|
.parent = &clk_xtal,
|
|
.id = -1,
|
|
};
|
|
|
|
static struct clk clk_mdivclk = {
|
|
.name = "mdivclk",
|
|
.parent = &clk_xtal,
|
|
.id = -1,
|
|
};
|
|
|
|
static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent)
|
|
{
|
|
unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
|
|
|
|
if (parent == &clk_usysclk)
|
|
clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK;
|
|
else if (parent == &clk_h)
|
|
clksrc |= S3C2412_CLKSRC_USBCLK_HCLK;
|
|
else
|
|
return -EINVAL;
|
|
|
|
clk->parent = parent;
|
|
|
|
__raw_writel(clksrc, S3C2412_CLKSRC);
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk,
|
|
unsigned long rate)
|
|
{
|
|
unsigned long parent_rate = clk_get_rate(clk->parent);
|
|
int div;
|
|
|
|
if (rate > parent_rate)
|
|
return parent_rate;
|
|
|
|
div = parent_rate / rate;
|
|
if (div > 2)
|
|
div = 2;
|
|
|
|
return parent_rate / div;
|
|
}
|
|
|
|
static unsigned long s3c2412_getrate_usbsrc(struct clk *clk)
|
|
{
|
|
unsigned long parent_rate = clk_get_rate(clk->parent);
|
|
unsigned long div = __raw_readl(S3C2410_CLKDIVN);
|
|
|
|
return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1);
|
|
}
|
|
|
|
static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
|
|
{
|
|
unsigned long parent_rate = clk_get_rate(clk->parent);
|
|
unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
|
|
|
|
rate = s3c2412_roundrate_usbsrc(clk, rate);
|
|
|
|
if ((parent_rate / rate) == 2)
|
|
clkdivn |= S3C2412_CLKDIVN_USB48DIV;
|
|
else
|
|
clkdivn &= ~S3C2412_CLKDIVN_USB48DIV;
|
|
|
|
__raw_writel(clkdivn, S3C2410_CLKDIVN);
|
|
return 0;
|
|
}
|
|
|
|
static struct clk clk_usbsrc = {
|
|
.name = "usbsrc",
|
|
.id = -1,
|
|
.get_rate = s3c2412_getrate_usbsrc,
|
|
.set_rate = s3c2412_setrate_usbsrc,
|
|
.round_rate = s3c2412_roundrate_usbsrc,
|
|
.set_parent = s3c2412_setparent_usbsrc,
|
|
};
|
|
|
|
static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
|
|
{
|
|
unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
|
|
|
|
if (parent == &clk_mdivclk)
|
|
clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
|
|
else if (parent == &clk_mpll)
|
|
clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
|
|
else
|
|
return -EINVAL;
|
|
|
|
clk->parent = parent;
|
|
|
|
__raw_writel(clksrc, S3C2412_CLKSRC);
|
|
return 0;
|
|
}
|
|
|
|
static struct clk clk_msysclk = {
|
|
.name = "msysclk",
|
|
.id = -1,
|
|
.set_parent = s3c2412_setparent_msysclk,
|
|
};
|
|
|
|
static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
|
|
{
|
|
unsigned long flags;
|
|
unsigned long clkdiv;
|
|
unsigned long dvs;
|
|
|
|
/* Note, we current equate fclk andf msysclk for S3C2412 */
|
|
|
|
if (parent == &clk_msysclk || parent == &clk_f)
|
|
dvs = 0;
|
|
else if (parent == &clk_h)
|
|
dvs = S3C2412_CLKDIVN_DVSEN;
|
|
else
|
|
return -EINVAL;
|
|
|
|
clk->parent = parent;
|
|
|
|
/* update this under irq lockdown, clkdivn is not protected
|
|
* by the clock system. */
|
|
|
|
local_irq_save(flags);
|
|
|
|
clkdiv = __raw_readl(S3C2410_CLKDIVN);
|
|
clkdiv &= ~S3C2412_CLKDIVN_DVSEN;
|
|
clkdiv |= dvs;
|
|
__raw_writel(clkdiv, S3C2410_CLKDIVN);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct clk clk_armclk = {
|
|
.name = "armclk",
|
|
.id = -1,
|
|
.parent = &clk_msysclk,
|
|
.set_parent = s3c2412_setparent_armclk,
|
|
};
|
|
|
|
/* these next clocks have an divider immediately after them,
|
|
* so we can register them with their divider and leave out the
|
|
* intermediate clock stage
|
|
*/
|
|
static unsigned long s3c2412_roundrate_clksrc(struct clk *clk,
|
|
unsigned long rate)
|
|
{
|
|
unsigned long parent_rate = clk_get_rate(clk->parent);
|
|
int div;
|
|
|
|
if (rate > parent_rate)
|
|
return parent_rate;
|
|
|
|
/* note, we remove the +/- 1 calculations as they cancel out */
|
|
|
|
div = (rate / parent_rate);
|
|
|
|
if (div < 1)
|
|
div = 1;
|
|
else if (div > 16)
|
|
div = 16;
|
|
|
|
return parent_rate / div;
|
|
}
|
|
|
|
static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent)
|
|
{
|
|
unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
|
|
|
|
if (parent == &clk_erefclk)
|
|
clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL;
|
|
else if (parent == &clk_mpll)
|
|
clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL;
|
|
else
|
|
return -EINVAL;
|
|
|
|
clk->parent = parent;
|
|
|
|
__raw_writel(clksrc, S3C2412_CLKSRC);
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long s3c2412_getrate_uart(struct clk *clk)
|
|
{
|
|
unsigned long parent_rate = clk_get_rate(clk->parent);
|
|
unsigned long div = __raw_readl(S3C2410_CLKDIVN);
|
|
|
|
div &= S3C2412_CLKDIVN_UARTDIV_MASK;
|
|
div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT;
|
|
|
|
return parent_rate / (div + 1);
|
|
}
|
|
|
|
static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
|
|
{
|
|
unsigned long parent_rate = clk_get_rate(clk->parent);
|
|
unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
|
|
|
|
rate = s3c2412_roundrate_clksrc(clk, rate);
|
|
|
|
clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK;
|
|
clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT;
|
|
|
|
__raw_writel(clkdivn, S3C2410_CLKDIVN);
|
|
return 0;
|
|
}
|
|
|
|
static struct clk clk_uart = {
|
|
.name = "uartclk",
|
|
.id = -1,
|
|
.get_rate = s3c2412_getrate_uart,
|
|
.set_rate = s3c2412_setrate_uart,
|
|
.set_parent = s3c2412_setparent_uart,
|
|
.round_rate = s3c2412_roundrate_clksrc,
|
|
};
|
|
|
|
static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
|
|
{
|
|
unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
|
|
|
|
if (parent == &clk_erefclk)
|
|
clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL;
|
|
else if (parent == &clk_mpll)
|
|
clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL;
|
|
else
|
|
return -EINVAL;
|
|
|
|
clk->parent = parent;
|
|
|
|
__raw_writel(clksrc, S3C2412_CLKSRC);
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long s3c2412_getrate_i2s(struct clk *clk)
|
|
{
|
|
unsigned long parent_rate = clk_get_rate(clk->parent);
|
|
unsigned long div = __raw_readl(S3C2410_CLKDIVN);
|
|
|
|
div &= S3C2412_CLKDIVN_I2SDIV_MASK;
|
|
div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT;
|
|
|
|
return parent_rate / (div + 1);
|
|
}
|
|
|
|
static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
|
|
{
|
|
unsigned long parent_rate = clk_get_rate(clk->parent);
|
|
unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
|
|
|
|
rate = s3c2412_roundrate_clksrc(clk, rate);
|
|
|
|
clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK;
|
|
clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT;
|
|
|
|
__raw_writel(clkdivn, S3C2410_CLKDIVN);
|
|
return 0;
|
|
}
|
|
|
|
static struct clk clk_i2s = {
|
|
.name = "i2sclk",
|
|
.id = -1,
|
|
.get_rate = s3c2412_getrate_i2s,
|
|
.set_rate = s3c2412_setrate_i2s,
|
|
.set_parent = s3c2412_setparent_i2s,
|
|
.round_rate = s3c2412_roundrate_clksrc,
|
|
};
|
|
|
|
static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
|
|
{
|
|
unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
|
|
|
|
if (parent == &clk_usysclk)
|
|
clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK;
|
|
else if (parent == &clk_h)
|
|
clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK;
|
|
else
|
|
return -EINVAL;
|
|
|
|
clk->parent = parent;
|
|
|
|
__raw_writel(clksrc, S3C2412_CLKSRC);
|
|
return 0;
|
|
}
|
|
static unsigned long s3c2412_getrate_cam(struct clk *clk)
|
|
{
|
|
unsigned long parent_rate = clk_get_rate(clk->parent);
|
|
unsigned long div = __raw_readl(S3C2410_CLKDIVN);
|
|
|
|
div &= S3C2412_CLKDIVN_CAMDIV_MASK;
|
|
div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT;
|
|
|
|
return parent_rate / (div + 1);
|
|
}
|
|
|
|
static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
|
|
{
|
|
unsigned long parent_rate = clk_get_rate(clk->parent);
|
|
unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
|
|
|
|
rate = s3c2412_roundrate_clksrc(clk, rate);
|
|
|
|
clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK;
|
|
clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT;
|
|
|
|
__raw_writel(clkdivn, S3C2410_CLKDIVN);
|
|
return 0;
|
|
}
|
|
|
|
static struct clk clk_cam = {
|
|
.name = "camif-upll", /* same as 2440 name */
|
|
.id = -1,
|
|
.get_rate = s3c2412_getrate_cam,
|
|
.set_rate = s3c2412_setrate_cam,
|
|
.set_parent = s3c2412_setparent_cam,
|
|
.round_rate = s3c2412_roundrate_clksrc,
|
|
};
|
|
|
|
/* standard clock definitions */
|
|
|
|
static struct clk init_clocks_disable[] = {
|
|
{
|
|
.name = "nand",
|
|
.id = -1,
|
|
.parent = &clk_h,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_NAND,
|
|
}, {
|
|
.name = "sdi",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_SDI,
|
|
}, {
|
|
.name = "adc",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_ADC,
|
|
}, {
|
|
.name = "i2c",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_IIC,
|
|
}, {
|
|
.name = "iis",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_IIS,
|
|
}, {
|
|
.name = "spi",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_SPI,
|
|
}
|
|
};
|
|
|
|
static struct clk init_clocks[] = {
|
|
{
|
|
.name = "dma",
|
|
.id = 0,
|
|
.parent = &clk_h,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_DMA0,
|
|
}, {
|
|
.name = "dma",
|
|
.id = 1,
|
|
.parent = &clk_h,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_DMA1,
|
|
}, {
|
|
.name = "dma",
|
|
.id = 2,
|
|
.parent = &clk_h,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_DMA2,
|
|
}, {
|
|
.name = "dma",
|
|
.id = 3,
|
|
.parent = &clk_h,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_DMA3,
|
|
}, {
|
|
.name = "lcd",
|
|
.id = -1,
|
|
.parent = &clk_h,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_LCDC,
|
|
}, {
|
|
.name = "gpio",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_GPIO,
|
|
}, {
|
|
.name = "usb-host",
|
|
.id = -1,
|
|
.parent = &clk_h,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_USBH,
|
|
}, {
|
|
.name = "usb-device",
|
|
.id = -1,
|
|
.parent = &clk_h,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_USBD,
|
|
}, {
|
|
.name = "timers",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_PWMT,
|
|
}, {
|
|
.name = "uart",
|
|
.id = 0,
|
|
.parent = &clk_p,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_UART0,
|
|
}, {
|
|
.name = "uart",
|
|
.id = 1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_UART1,
|
|
}, {
|
|
.name = "uart",
|
|
.id = 2,
|
|
.parent = &clk_p,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_UART2,
|
|
}, {
|
|
.name = "rtc",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_RTC,
|
|
}, {
|
|
.name = "watchdog",
|
|
.id = -1,
|
|
.parent = &clk_p,
|
|
.ctrlbit = 0,
|
|
}, {
|
|
.name = "usb-bus-gadget",
|
|
.id = -1,
|
|
.parent = &clk_usb_bus,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_USB_DEV48,
|
|
}, {
|
|
.name = "usb-bus-host",
|
|
.id = -1,
|
|
.parent = &clk_usb_bus,
|
|
.enable = s3c2412_clkcon_enable,
|
|
.ctrlbit = S3C2412_CLKCON_USB_HOST48,
|
|
}
|
|
};
|
|
|
|
/* clocks to add where we need to check their parentage */
|
|
|
|
struct clk_init {
|
|
struct clk *clk;
|
|
unsigned int bit;
|
|
struct clk *src_0;
|
|
struct clk *src_1;
|
|
};
|
|
|
|
static struct clk_init clks_src[] __initdata = {
|
|
{
|
|
.clk = &clk_usysclk,
|
|
.bit = S3C2412_CLKSRC_USBCLK_HCLK,
|
|
.src_0 = &clk_urefclk,
|
|
.src_1 = &clk_upll,
|
|
}, {
|
|
.clk = &clk_i2s,
|
|
.bit = S3C2412_CLKSRC_I2SCLK_MPLL,
|
|
.src_0 = &clk_erefclk,
|
|
.src_1 = &clk_mpll,
|
|
}, {
|
|
.clk = &clk_cam,
|
|
.bit = S3C2412_CLKSRC_CAMCLK_HCLK,
|
|
.src_0 = &clk_usysclk,
|
|
.src_1 = &clk_h,
|
|
}, {
|
|
.clk = &clk_msysclk,
|
|
.bit = S3C2412_CLKSRC_MSYSCLK_MPLL,
|
|
.src_0 = &clk_mdivclk,
|
|
.src_1 = &clk_mpll,
|
|
}, {
|
|
.clk = &clk_uart,
|
|
.bit = S3C2412_CLKSRC_UARTCLK_MPLL,
|
|
.src_0 = &clk_erefclk,
|
|
.src_1 = &clk_mpll,
|
|
}, {
|
|
.clk = &clk_usbsrc,
|
|
.bit = S3C2412_CLKSRC_USBCLK_HCLK,
|
|
.src_0 = &clk_usysclk,
|
|
.src_1 = &clk_h,
|
|
/* here we assume OM[4] select xtal */
|
|
}, {
|
|
.clk = &clk_erefclk,
|
|
.bit = S3C2412_CLKSRC_EREFCLK_EXTCLK,
|
|
.src_0 = &clk_xtal,
|
|
.src_1 = &clk_ext,
|
|
}, {
|
|
.clk = &clk_urefclk,
|
|
.bit = S3C2412_CLKSRC_UREFCLK_EXTCLK,
|
|
.src_0 = &clk_xtal,
|
|
.src_1 = &clk_ext,
|
|
},
|
|
};
|
|
|
|
/* s3c2412_clk_initparents
|
|
*
|
|
* Initialise the parents for the clocks that we get at start-time
|
|
*/
|
|
|
|
static void __init s3c2412_clk_initparents(void)
|
|
{
|
|
unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
|
|
struct clk_init *cip = clks_src;
|
|
struct clk *src;
|
|
int ptr;
|
|
int ret;
|
|
|
|
for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) {
|
|
ret = s3c24xx_register_clock(cip->clk);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "Failed to register clock %s (%d)\n",
|
|
cip->clk->name, ret);
|
|
}
|
|
|
|
src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0;
|
|
|
|
printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name);
|
|
clk_set_parent(cip->clk, src);
|
|
}
|
|
}
|
|
|
|
/* clocks to add straight away */
|
|
|
|
static struct clk *clks[] __initdata = {
|
|
&clk_ext,
|
|
&clk_usb_bus,
|
|
&clk_mrefclk,
|
|
&clk_armclk,
|
|
};
|
|
|
|
int __init s3c2412_baseclk_add(void)
|
|
{
|
|
unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
|
|
unsigned int dvs;
|
|
struct clk *clkp;
|
|
int ret;
|
|
int ptr;
|
|
|
|
clk_upll.enable = s3c2412_upll_enable;
|
|
clk_usb_bus.parent = &clk_usbsrc;
|
|
clk_usb_bus.rate = 0x0;
|
|
|
|
clk_f.parent = &clk_msysclk;
|
|
|
|
s3c2412_clk_initparents();
|
|
|
|
for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
|
|
clkp = clks[ptr];
|
|
|
|
ret = s3c24xx_register_clock(clkp);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "Failed to register clock %s (%d)\n",
|
|
clkp->name, ret);
|
|
}
|
|
}
|
|
|
|
/* set the dvs state according to what we got at boot time */
|
|
|
|
dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN;
|
|
|
|
if (dvs)
|
|
clk_armclk.parent = &clk_h;
|
|
|
|
printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off");
|
|
|
|
/* ensure usb bus clock is within correct rate of 48MHz */
|
|
|
|
if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
|
|
printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n");
|
|
|
|
/* for the moment, let's use the UPLL, and see if we can
|
|
* get 48MHz */
|
|
|
|
clk_set_parent(&clk_usysclk, &clk_upll);
|
|
clk_set_parent(&clk_usbsrc, &clk_usysclk);
|
|
clk_set_rate(&clk_usbsrc, 48*1000*1000);
|
|
}
|
|
|
|
printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
|
|
(__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on",
|
|
print_mhz(clk_get_rate(&clk_upll)),
|
|
print_mhz(clk_get_rate(&clk_usb_bus)));
|
|
|
|
/* register clocks from clock array */
|
|
|
|
clkp = init_clocks;
|
|
for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
|
|
/* ensure that we note the clock state */
|
|
|
|
clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
|
|
|
|
ret = s3c24xx_register_clock(clkp);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "Failed to register clock %s (%d)\n",
|
|
clkp->name, ret);
|
|
}
|
|
}
|
|
|
|
/* We must be careful disabling the clocks we are not intending to
|
|
* be using at boot time, as subsystems such as the LCD which do
|
|
* their own DMA requests to the bus can cause the system to lockup
|
|
* if they where in the middle of requesting bus access.
|
|
*
|
|
* Disabling the LCD clock if the LCD is active is very dangerous,
|
|
* and therefore the bootloader should be careful to not enable
|
|
* the LCD clock if it is not needed.
|
|
*/
|
|
|
|
/* install (and disable) the clocks we do not need immediately */
|
|
|
|
clkp = init_clocks_disable;
|
|
for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
|
|
|
|
ret = s3c24xx_register_clock(clkp);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "Failed to register clock %s (%d)\n",
|
|
clkp->name, ret);
|
|
}
|
|
|
|
s3c2412_clkcon_enable(clkp, 0);
|
|
}
|
|
|
|
s3c_pwmclk_init();
|
|
return 0;
|
|
}
|