388 строки
9.5 KiB
C
388 строки
9.5 KiB
C
/*arch/powerpc/platforms/8xx/mpc885ads_setup.c
|
|
*
|
|
* Platform setup for the Freescale mpc885ads board
|
|
*
|
|
* Vitaly Bordug <vbordug@ru.mvista.com>
|
|
*
|
|
* Copyright 2005 MontaVista Software Inc.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/param.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/root_dev.h>
|
|
|
|
#include <linux/fs_enet_pd.h>
|
|
#include <linux/fs_uart_pd.h>
|
|
#include <linux/mii.h>
|
|
|
|
#include <asm/delay.h>
|
|
#include <asm/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/page.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/system.h>
|
|
#include <asm/time.h>
|
|
#include <asm/ppcboot.h>
|
|
#include <asm/mpc8xx.h>
|
|
#include <asm/8xx_immap.h>
|
|
#include <asm/commproc.h>
|
|
#include <asm/fs_pd.h>
|
|
#include <asm/prom.h>
|
|
|
|
extern void cpm_reset(void);
|
|
extern void mpc8xx_show_cpuinfo(struct seq_file*);
|
|
extern void mpc8xx_restart(char *cmd);
|
|
extern void mpc8xx_calibrate_decr(void);
|
|
extern int mpc8xx_set_rtc_time(struct rtc_time *tm);
|
|
extern void mpc8xx_get_rtc_time(struct rtc_time *tm);
|
|
extern void m8xx_pic_init(void);
|
|
extern unsigned int mpc8xx_get_irq(void);
|
|
|
|
static void init_smc1_uart_ioports(struct fs_uart_platform_info* fpi);
|
|
static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi);
|
|
static void init_scc3_ioports(struct fs_platform_info* ptr);
|
|
|
|
void __init mpc885ads_board_setup(void)
|
|
{
|
|
cpm8xx_t *cp;
|
|
unsigned int *bcsr_io;
|
|
u8 tmpval8;
|
|
|
|
#ifdef CONFIG_FS_ENET
|
|
iop8xx_t *io_port;
|
|
#endif
|
|
|
|
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
|
|
cp = (cpm8xx_t *)immr_map(im_cpm);
|
|
|
|
if (bcsr_io == NULL) {
|
|
printk(KERN_CRIT "Could not remap BCSR\n");
|
|
return;
|
|
}
|
|
#ifdef CONFIG_SERIAL_CPM_SMC1
|
|
clrbits32(bcsr_io, BCSR1_RS232EN_1);
|
|
clrbits32(&cp->cp_simode, 0xe0000000 >> 17); /* brg1 */
|
|
tmpval8 = in_8(&(cp->cp_smc[0].smc_smcm)) | (SMCM_RX | SMCM_TX);
|
|
out_8(&(cp->cp_smc[0].smc_smcm), tmpval8);
|
|
clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN); /* brg1 */
|
|
#else
|
|
setbits32(bcsr_io,BCSR1_RS232EN_1);
|
|
out_be16(&cp->cp_smc[0].smc_smcmr, 0);
|
|
out_8(&cp->cp_smc[0].smc_smce, 0);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SMC2
|
|
clrbits32(bcsr_io,BCSR1_RS232EN_2);
|
|
clrbits32(&cp->cp_simode, 0xe0000000 >> 1);
|
|
setbits32(&cp->cp_simode, 0x20000000 >> 1); /* brg2 */
|
|
tmpval8 = in_8(&(cp->cp_smc[1].smc_smcm)) | (SMCM_RX | SMCM_TX);
|
|
out_8(&(cp->cp_smc[1].smc_smcm), tmpval8);
|
|
clrbits16(&cp->cp_smc[1].smc_smcmr, SMCMR_REN | SMCMR_TEN);
|
|
|
|
init_smc2_uart_ioports(0);
|
|
#else
|
|
setbits32(bcsr_io,BCSR1_RS232EN_2);
|
|
out_be16(&cp->cp_smc[1].smc_smcmr, 0);
|
|
out_8(&cp->cp_smc[1].smc_smce, 0);
|
|
#endif
|
|
immr_unmap(cp);
|
|
iounmap(bcsr_io);
|
|
|
|
#ifdef CONFIG_FS_ENET
|
|
/* use MDC for MII (common) */
|
|
io_port = (iop8xx_t*)immr_map(im_ioport);
|
|
setbits16(&io_port->iop_pdpar, 0x0080);
|
|
clrbits16(&io_port->iop_pddir, 0x0080);
|
|
|
|
bcsr_io = ioremap(BCSR5, sizeof(unsigned long));
|
|
clrbits32(bcsr_io,BCSR5_MII1_EN);
|
|
clrbits32(bcsr_io,BCSR5_MII1_RST);
|
|
#ifndef CONFIG_FC_ENET_HAS_SCC
|
|
clrbits32(bcsr_io,BCSR5_MII2_EN);
|
|
clrbits32(bcsr_io,BCSR5_MII2_RST);
|
|
|
|
#endif
|
|
iounmap(bcsr_io);
|
|
immr_unmap(io_port);
|
|
|
|
#endif
|
|
}
|
|
|
|
|
|
static void init_fec1_ioports(struct fs_platform_info* ptr)
|
|
{
|
|
cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm);
|
|
iop8xx_t *io_port = (iop8xx_t *)immr_map(im_ioport);
|
|
|
|
/* configure FEC1 pins */
|
|
setbits16(&io_port->iop_papar, 0xf830);
|
|
setbits16(&io_port->iop_padir, 0x0830);
|
|
clrbits16(&io_port->iop_padir, 0xf000);
|
|
|
|
setbits32(&cp->cp_pbpar, 0x00001001);
|
|
clrbits32(&cp->cp_pbdir, 0x00001001);
|
|
|
|
setbits16(&io_port->iop_pcpar, 0x000c);
|
|
clrbits16(&io_port->iop_pcdir, 0x000c);
|
|
|
|
setbits32(&cp->cp_pepar, 0x00000003);
|
|
setbits32(&cp->cp_pedir, 0x00000003);
|
|
clrbits32(&cp->cp_peso, 0x00000003);
|
|
clrbits32(&cp->cp_cptr, 0x00000100);
|
|
|
|
immr_unmap(io_port);
|
|
immr_unmap(cp);
|
|
}
|
|
|
|
|
|
static void init_fec2_ioports(struct fs_platform_info* ptr)
|
|
{
|
|
cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm);
|
|
iop8xx_t *io_port = (iop8xx_t *)immr_map(im_ioport);
|
|
|
|
/* configure FEC2 pins */
|
|
setbits32(&cp->cp_pepar, 0x0003fffc);
|
|
setbits32(&cp->cp_pedir, 0x0003fffc);
|
|
clrbits32(&cp->cp_peso, 0x000087fc);
|
|
setbits32(&cp->cp_peso, 0x00037800);
|
|
clrbits32(&cp->cp_cptr, 0x00000080);
|
|
|
|
immr_unmap(io_port);
|
|
immr_unmap(cp);
|
|
}
|
|
|
|
void init_fec_ioports(struct fs_platform_info *fpi)
|
|
{
|
|
int fec_no = fs_get_fec_index(fpi->fs_no);
|
|
|
|
switch (fec_no) {
|
|
case 0:
|
|
init_fec1_ioports(fpi);
|
|
break;
|
|
case 1:
|
|
init_fec2_ioports(fpi);
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "init_fec_ioports: invalid FEC number\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void init_scc3_ioports(struct fs_platform_info* fpi)
|
|
{
|
|
unsigned *bcsr_io;
|
|
iop8xx_t *io_port;
|
|
cpm8xx_t *cp;
|
|
|
|
bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE);
|
|
io_port = (iop8xx_t *)immr_map(im_ioport);
|
|
cp = (cpm8xx_t *)immr_map(im_cpm);
|
|
|
|
if (bcsr_io == NULL) {
|
|
printk(KERN_CRIT "Could not remap BCSR\n");
|
|
return;
|
|
}
|
|
|
|
/* Enable the PHY.
|
|
*/
|
|
clrbits32(bcsr_io+4, BCSR4_ETH10_RST);
|
|
udelay(1000);
|
|
setbits32(bcsr_io+4, BCSR4_ETH10_RST);
|
|
/* Configure port A pins for Txd and Rxd.
|
|
*/
|
|
setbits16(&io_port->iop_papar, PA_ENET_RXD | PA_ENET_TXD);
|
|
clrbits16(&io_port->iop_padir, PA_ENET_RXD | PA_ENET_TXD);
|
|
|
|
/* Configure port C pins to enable CLSN and RENA.
|
|
*/
|
|
clrbits16(&io_port->iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
|
|
clrbits16(&io_port->iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
|
|
setbits16(&io_port->iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
|
|
|
|
/* Configure port E for TCLK and RCLK.
|
|
*/
|
|
setbits32(&cp->cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK);
|
|
clrbits32(&cp->cp_pepar, PE_ENET_TENA);
|
|
clrbits32(&cp->cp_pedir,
|
|
PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA);
|
|
clrbits32(&cp->cp_peso, PE_ENET_TCLK | PE_ENET_RCLK);
|
|
setbits32(&cp->cp_peso, PE_ENET_TENA);
|
|
|
|
/* Configure Serial Interface clock routing.
|
|
* First, clear all SCC bits to zero, then set the ones we want.
|
|
*/
|
|
clrbits32(&cp->cp_sicr, SICR_ENET_MASK);
|
|
setbits32(&cp->cp_sicr, SICR_ENET_CLKRT);
|
|
|
|
/* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used.
|
|
*/
|
|
clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN);
|
|
/* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode
|
|
* by H/W setting after reset. SCC ethernet controller support only half duplex.
|
|
* This discrepancy of modes causes a lot of carrier lost errors.
|
|
*/
|
|
|
|
/* In the original SCC enet driver the following code is placed at
|
|
the end of the initialization */
|
|
setbits32(&cp->cp_pepar, PE_ENET_TENA);
|
|
clrbits32(&cp->cp_pedir, PE_ENET_TENA);
|
|
setbits32(&cp->cp_peso, PE_ENET_TENA);
|
|
|
|
setbits32(bcsr_io+4, BCSR1_ETHEN);
|
|
iounmap(bcsr_io);
|
|
immr_unmap(io_port);
|
|
immr_unmap(cp);
|
|
}
|
|
|
|
void init_scc_ioports(struct fs_platform_info *fpi)
|
|
{
|
|
int scc_no = fs_get_scc_index(fpi->fs_no);
|
|
|
|
switch (scc_no) {
|
|
case 2:
|
|
init_scc3_ioports(fpi);
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
static void init_smc1_uart_ioports(struct fs_uart_platform_info* ptr)
|
|
{
|
|
unsigned *bcsr_io;
|
|
cpm8xx_t *cp;
|
|
|
|
cp = (cpm8xx_t *)immr_map(im_cpm);
|
|
setbits32(&cp->cp_pepar, 0x000000c0);
|
|
clrbits32(&cp->cp_pedir, 0x000000c0);
|
|
clrbits32(&cp->cp_peso, 0x00000040);
|
|
setbits32(&cp->cp_peso, 0x00000080);
|
|
immr_unmap(cp);
|
|
|
|
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
|
|
|
|
if (bcsr_io == NULL) {
|
|
printk(KERN_CRIT "Could not remap BCSR1\n");
|
|
return;
|
|
}
|
|
clrbits32(bcsr_io,BCSR1_RS232EN_1);
|
|
iounmap(bcsr_io);
|
|
}
|
|
|
|
static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi)
|
|
{
|
|
unsigned *bcsr_io;
|
|
cpm8xx_t *cp;
|
|
|
|
cp = (cpm8xx_t *)immr_map(im_cpm);
|
|
setbits32(&cp->cp_pepar, 0x00000c00);
|
|
clrbits32(&cp->cp_pedir, 0x00000c00);
|
|
clrbits32(&cp->cp_peso, 0x00000400);
|
|
setbits32(&cp->cp_peso, 0x00000800);
|
|
immr_unmap(cp);
|
|
|
|
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
|
|
|
|
if (bcsr_io == NULL) {
|
|
printk(KERN_CRIT "Could not remap BCSR1\n");
|
|
return;
|
|
}
|
|
clrbits32(bcsr_io,BCSR1_RS232EN_2);
|
|
iounmap(bcsr_io);
|
|
}
|
|
|
|
void init_smc_ioports(struct fs_uart_platform_info *data)
|
|
{
|
|
int smc_no = fs_uart_id_fsid2smc(data->fs_no);
|
|
|
|
switch (smc_no) {
|
|
case 0:
|
|
init_smc1_uart_ioports(data);
|
|
data->brg = data->clk_rx;
|
|
break;
|
|
case 1:
|
|
init_smc2_uart_ioports(data);
|
|
data->brg = data->clk_rx;
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
int platform_device_skip(const char *model, int id)
|
|
{
|
|
#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
|
|
const char *dev = "FEC";
|
|
int n = 2;
|
|
#else
|
|
const char *dev = "SCC";
|
|
int n = 3;
|
|
#endif
|
|
|
|
if (!strcmp(model, dev) && n == id)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __init mpc885ads_setup_arch(void)
|
|
{
|
|
struct device_node *cpu;
|
|
|
|
cpu = of_find_node_by_type(NULL, "cpu");
|
|
if (cpu != 0) {
|
|
const unsigned int *fp;
|
|
|
|
fp = of_get_property(cpu, "clock-frequency", NULL);
|
|
if (fp != 0)
|
|
loops_per_jiffy = *fp / HZ;
|
|
else
|
|
loops_per_jiffy = 50000000 / HZ;
|
|
of_node_put(cpu);
|
|
}
|
|
|
|
cpm_reset();
|
|
|
|
mpc885ads_board_setup();
|
|
|
|
ROOT_DEV = Root_NFS;
|
|
}
|
|
|
|
static int __init mpc885ads_probe(void)
|
|
{
|
|
char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
|
|
"model", NULL);
|
|
if (model == NULL)
|
|
return 0;
|
|
if (strcmp(model, "MPC885ADS"))
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
define_machine(mpc885_ads) {
|
|
.name = "MPC885 ADS",
|
|
.probe = mpc885ads_probe,
|
|
.setup_arch = mpc885ads_setup_arch,
|
|
.init_IRQ = m8xx_pic_init,
|
|
.show_cpuinfo = mpc8xx_show_cpuinfo,
|
|
.get_irq = mpc8xx_get_irq,
|
|
.restart = mpc8xx_restart,
|
|
.calibrate_decr = mpc8xx_calibrate_decr,
|
|
.set_rtc_time = mpc8xx_set_rtc_time,
|
|
.get_rtc_time = mpc8xx_get_rtc_time,
|
|
};
|