WSL2-Linux-Kernel/drivers/gpio
Linus Torvalds 1d8ce0e093 This is the bulk of GPIO changes for the v5.9 kernel cycle:
Core changes:
 
 - Introduce the for_each_requested_gpio() macro to help in
   dependent code all over the place. Also patch a few locations
   to use it while we are at it.
 
 - Split out the sysfs code into its own file.
 
 - Split out the character device code into its own file, then
   make a set of refactorings and improvements to this code.
   We are setting the stage to revamp the userspace API a bit
   in the next cycle.
 
 - Fix a whole slew of kerneldoc that was wrong or missing.
 
 New drivers:
 
 - The PCA953x driver now supports the PCAL9535.
 
 Driver improvements:
 
 - A host of incremental modernizations and improvements to the
   PCA953x driver.
 
 - Incremental improvements to the Xilinx Zynq driver.
 
 - Some improvements to the GPIO aggregator driver.
 
 - I ran all over the place switching all threaded and other
   drivers requesting their own IRQ while using the core
   GPIO IRQ helpers to pass the GPIO irq chip as a template
   instead of calling the explicit set-up functions. Next merge
   window we may retire the old code altogether.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl8p2cEACgkQQRCzN7AZ
 XXMjBBAAs4YwEALYTCvpzbXdYGAgMGIEAD84dPBZTAYj3P/iGuXPk/+wdt4wLHTD
 dQl0/MG6JXf+mCClgsHhC+ILPUS6YM/v/it4gnV4j6o/ugYiNPADYl4pieaq/SVb
 jNrSxs0tzZYTtlq6xSmRMCpA8SgP3ASWNa5dp5mDkuo3xaEJvM3cpsww7Q5GG3Fb
 HQD9+XgBGQx7H+6JMoNHR8/E9A5y4pwIvTlfqzTcq3UupTqlvklekgu0fTiA6D7t
 z/ydQpYtqevuirir7J7oMiIhTSPgTkOcUwNO6hCcwpO/a0q7jwy1DvGIyJDM2yIj
 UYby03SCLknFGxLwKAcavC3mnLIIor61385e5+lXBH0OS7EO8OpBoi9vAxqalcZ8
 ZRrOyYrT3et40rD+ByFFwbUsrD9D4c0Ul+Ocr8upKdnGlRW/u8YahIwn82qnKjF0
 ANJanZu76c8ZU8AJQyM/HD7hrcJ0MJXhECXb/JJx4O52ebi4fmOdtS/Kx2urH4KR
 hX3tspQM/tU89a4jW7NIzzfZKlnPI2rI3NxYgziQVgVnt+iVrkyBiYSoWhK+DEyu
 JJl5zXHvgb1UmejqN2Qtkq9V+3R2VEYg7WUyr6b48q4acSVI1q+NfGE7+GBT/+d4
 Kt1eGz8QtEnxspDhVsQNY4WSP8QpwhmWWM2ujsO6a81vyjB4vSg=
 =OSvz
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v5.9 kernel cycle.

  There is nothing too exciting in it, but a new macro that fixes a
  build failure on a minor ARM32 platform that appeared yesterday is
  part of it so we better merge it.

  Core changes:

   - Introduce the for_each_requested_gpio() macro to help in dependent
     code all over the place. Also patch a few locations to use it while
     we are at it.

   - Split out the sysfs code into its own file.

   - Split out the character device code into its own file, then make a
     set of refactorings and improvements to this code. We are setting
     the stage to revamp the userspace API a bit in the next cycle.

   - Fix a whole slew of kerneldoc that was wrong or missing.

  New drivers:

   - The PCA953x driver now supports the PCAL9535.

  Driver improvements:

   - A host of incremental modernizations and improvements to the
     PCA953x driver.

   - Incremental improvements to the Xilinx Zynq driver.

   - Some improvements to the GPIO aggregator driver.

   - I ran all over the place switching all threaded and other drivers
     requesting their own IRQ while using the core GPIO IRQ helpers to
     pass the GPIO irq chip as a template instead of calling the
     explicit set-up functions. Next merge window we may retire the old
     code altogether"

* tag 'gpio-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (97 commits)
  gpio: wcove: Request IRQ after all initialisation done
  gpio: crystalcove: Free IRQ on error path
  gpio: pca953x: Request IRQ after all initialisation done
  gpio: don't use same lockdep class for all devm_gpiochip_add_data users
  gpio: max732x: Use irqchip template
  gpio: stmpe: Move chip registration
  gpio: rcar: Use irqchip template
  gpio: regmap: fix type clash
  gpio: Correct kernel-doc inconsistency
  gpio: pci-idio-16: Use irqchip template
  gpio: pcie-idio-24: Use irqchip template
  gpio: 104-idio-16: Use irqchip template
  gpio: 104-idi-48: Use irqchip template
  gpio: 104-dio-48e: Use irqchip template
  gpio: ws16c48: Use irqchip template
  gpio: omap: improve coding style for pin config flags
  gpio: dln2: Use irqchip template
  gpio: sch: Add a blank line between declaration and code
  gpio: sch: changed every 'unsigned' to 'unsigned int'
  gpio: ich: changed every 'unsigned' to 'unsigned int'
  ...
2020-08-05 12:56:27 -07:00
..
Kconfig gpio: pca9570: add GPO driver for PCA9570 2020-07-16 14:35:12 +02:00
Makefile gpio: pca9570: add GPO driver for PCA9570 2020-07-16 14:35:12 +02:00
TODO
gpio-74x164.c
gpio-74xx-mmio.c
gpio-104-dio-48e.c gpio: 104-dio-48e: Use irqchip template 2020-07-23 15:09:26 +02:00
gpio-104-idi-48.c gpio: 104-idi-48: Use irqchip template 2020-07-23 15:09:54 +02:00
gpio-104-idio-16.c gpio: 104-idio-16: Use irqchip template 2020-07-23 15:10:25 +02:00
gpio-adnp.c gpio: adnp: Use irqchip template 2020-07-20 15:34:59 +02:00
gpio-adp5520.c
gpio-adp5588.c gpio: adp5588: Use irqchip template 2020-07-20 15:47:50 +02:00
gpio-aggregator.c
gpio-altera-a10sr.c
gpio-altera.c
gpio-amd-fch.c
gpio-amd8111.c
gpio-amdpt.c
gpio-arizona.c
gpio-aspeed-sgpio.c
gpio-aspeed.c
gpio-ath79.c
gpio-bcm-kona.c
gpio-bd9571mwv.c
gpio-bd70528.c
gpio-bd71828.c
gpio-brcmstb.c
gpio-bt8xx.c
gpio-cadence.c
gpio-clps711x.c
gpio-creg-snps.c
gpio-crystalcove.c gpio: crystalcove: Free IRQ on error path 2020-08-04 01:25:02 +02:00
gpio-cs5535.c
gpio-da9052.c
gpio-da9055.c
gpio-davinci.c
gpio-dln2.c gpio: dln2: Use irqchip template 2020-07-23 15:03:25 +02:00
gpio-dwapb.c
gpio-eic-sprd.c
gpio-em.c
gpio-ep93xx.c
gpio-exar.c
gpio-f7188x.c
gpio-ftgpio010.c
gpio-ge.c
gpio-gpio-mm.c
gpio-grgpio.c
gpio-gw-pld.c
gpio-hlwd.c
gpio-htc-egpio.c
gpio-ich.c gpio: ich: changed every 'unsigned' to 'unsigned int' 2020-07-22 16:00:27 +03:00
gpio-intel-mid.c
gpio-iop.c
gpio-it87.c
gpio-ixp4xx.c
gpio-janz-ttl.c
gpio-kempld.c
gpio-logicvc.c
gpio-loongson.c
gpio-loongson1.c
gpio-lp873x.c
gpio-lp3943.c
gpio-lp87565.c
gpio-lpc18xx.c
gpio-lpc32xx.c
gpio-madera.c
gpio-max730x.c
gpio-max732x.c gpio: max732x: Use irqchip template 2020-08-04 01:12:43 +02:00
gpio-max3191x.c
gpio-max7300.c
gpio-max7301.c
gpio-max77620.c gpio: max77620: Use helper variable and clarify 2020-07-17 14:03:38 +02:00
gpio-max77650.c
gpio-mb86s7x.c
gpio-mc9s08dz60.c
gpio-mc33880.c
gpio-menz127.c
gpio-merrifield.c
gpio-ml-ioh.c
gpio-mlxbf.c
gpio-mlxbf2.c
gpio-mm-lantiq.c
gpio-mmio.c gpio: mmio: replace open-coded for_each_set_bit() 2020-07-16 15:07:18 +02:00
gpio-mockup.c
gpio-moxtet.c
gpio-mpc8xxx.c
gpio-mpc5200.c
gpio-msic.c
gpio-mt7621.c
gpio-mvebu.c
gpio-mxc.c
gpio-mxs.c
gpio-octeon.c
gpio-omap.c gpio: omap: improve coding style for pin config flags 2020-07-23 15:05:23 +02:00
gpio-palmas.c
gpio-pca953x.c gpio: pca953x: Request IRQ after all initialisation done 2020-08-04 01:25:02 +02:00
gpio-pca9570.c gpio: pca9570: add GPO driver for PCA9570 2020-07-16 14:35:12 +02:00
gpio-pcf857x.c gpio: pcf857x: Use irqchip template 2020-07-20 15:56:40 +02:00
gpio-pch.c gpio: pch: Add a blank line between declaration and code 2020-07-21 19:12:57 +03:00
gpio-pci-idio-16.c gpio: pci-idio-16: Use irqchip template 2020-07-23 15:11:26 +02:00
gpio-pcie-idio-24.c gpio: pcie-idio-24: Use irqchip template 2020-07-23 15:10:55 +02:00
gpio-pisosr.c
gpio-pl061.c
gpio-pmic-eic-sprd.c
gpio-pxa.c
gpio-raspberrypi-exp.c
gpio-rc5t583.c
gpio-rcar.c gpio: rcar: Use irqchip template 2020-07-30 00:13:10 +02:00
gpio-rda.c
gpio-rdc321x.c
gpio-reg.c
gpio-regmap.c
gpio-sa1100.c
gpio-sama5d2-piobu.c
gpio-sch.c gpio: sch: Add a blank line between declaration and code 2020-07-22 16:00:27 +03:00
gpio-sch311x.c
gpio-sifive.c
gpio-siox.c
gpio-sodaville.c
gpio-spear-spics.c
gpio-sprd.c
gpio-sta2x11.c
gpio-stmpe.c gpio: stmpe: Move chip registration 2020-08-04 01:07:23 +02:00
gpio-stp-xway.c
gpio-syscon.c
gpio-tb10x.c
gpio-tc3589x.c gpio: tc35892: Use irqchip template 2020-07-20 15:33:34 +02:00
gpio-tegra.c
gpio-tegra186.c
gpio-thunderx.c
gpio-timberdale.c
gpio-tpic2810.c
gpio-tps6586x.c
gpio-tps65086.c
gpio-tps65218.c
gpio-tps65910.c
gpio-tps65912.c
gpio-tps68470.c
gpio-tqmx86.c
gpio-ts4800.c
gpio-ts4900.c
gpio-ts5500.c
gpio-twl4030.c
gpio-twl6040.c
gpio-ucb1400.c
gpio-uniphier.c
gpio-vf610.c
gpio-viperboard.c
gpio-vr41xx.c
gpio-vx855.c
gpio-wcd934x.c
gpio-wcove.c gpio: wcove: Request IRQ after all initialisation done 2020-08-04 01:25:02 +02:00
gpio-winbond.c
gpio-wm831x.c
gpio-wm8350.c
gpio-wm8994.c
gpio-ws16c48.c gpio: ws16c48: Use irqchip template 2020-07-23 15:08:55 +02:00
gpio-xgene-sb.c
gpio-xgene.c
gpio-xgs-iproc.c
gpio-xilinx.c
gpio-xlp.c
gpio-xra1403.c
gpio-xtensa.c
gpio-zevio.c
gpio-zx.c
gpio-zynq.c
gpiolib-acpi.c
gpiolib-acpi.h
gpiolib-cdev.c gpiolib: cdev: refactor lineevent cleanup into lineevent_free 2020-07-12 10:22:01 +02:00
gpiolib-cdev.h
gpiolib-devprop.c
gpiolib-devres.c gpio: don't use same lockdep class for all devm_gpiochip_add_data users 2020-08-04 01:22:02 +02:00
gpiolib-legacy.c
gpiolib-of.c This is the bulk of GPIO changes for the v5.9 kernel cycle: 2020-08-05 12:56:27 -07:00
gpiolib-of.h
gpiolib-sysfs.c
gpiolib-sysfs.h
gpiolib.c gpiolib: cdev: use blocking notifier call chain instead of atomic 2020-07-12 10:22:00 +02:00
gpiolib.h gpiolib: cdev: use blocking notifier call chain instead of atomic 2020-07-12 10:22:00 +02:00