329 строки
8.6 KiB
C
329 строки
8.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2014-2017, The Linux Foundation. All rights reserved.
|
|
* Copyright (c) 2019, Linaro Ltd.
|
|
*/
|
|
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/module.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <dt-bindings/phy/phy.h>
|
|
|
|
#define PCIE20_PARF_PHY_STTS 0x3c
|
|
#define PCIE2_PHY_RESET_CTRL 0x44
|
|
#define PCIE20_PARF_PHY_REFCLK_CTRL2 0xa0
|
|
#define PCIE20_PARF_PHY_REFCLK_CTRL3 0xa4
|
|
#define PCIE20_PARF_PCS_SWING_CTRL1 0x88
|
|
#define PCIE20_PARF_PCS_SWING_CTRL2 0x8c
|
|
#define PCIE20_PARF_PCS_DEEMPH1 0x74
|
|
#define PCIE20_PARF_PCS_DEEMPH2 0x78
|
|
#define PCIE20_PARF_PCS_DEEMPH3 0x7c
|
|
#define PCIE20_PARF_CONFIGBITS 0x84
|
|
#define PCIE20_PARF_PHY_CTRL3 0x94
|
|
#define PCIE20_PARF_PCS_CTRL 0x80
|
|
|
|
#define TX_AMP_VAL 120
|
|
#define PHY_RX0_EQ_GEN1_VAL 0
|
|
#define PHY_RX0_EQ_GEN2_VAL 4
|
|
#define TX_DEEMPH_GEN1_VAL 24
|
|
#define TX_DEEMPH_GEN2_3_5DB_VAL 26
|
|
#define TX_DEEMPH_GEN2_6DB_VAL 36
|
|
#define PHY_TX0_TERM_OFFST_VAL 0
|
|
|
|
struct qcom_phy {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
|
|
struct regulator_bulk_data vregs[2];
|
|
|
|
struct reset_control *phy_reset;
|
|
struct reset_control *pipe_reset;
|
|
struct clk *pipe_clk;
|
|
};
|
|
|
|
static int qcom_pcie2_phy_init(struct phy *phy)
|
|
{
|
|
struct qcom_phy *qphy = phy_get_drvdata(phy);
|
|
int ret;
|
|
|
|
ret = reset_control_deassert(qphy->phy_reset);
|
|
if (ret) {
|
|
dev_err(qphy->dev, "cannot deassert pipe reset\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
|
|
if (ret)
|
|
reset_control_assert(qphy->phy_reset);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qcom_pcie2_phy_power_on(struct phy *phy)
|
|
{
|
|
struct qcom_phy *qphy = phy_get_drvdata(phy);
|
|
int ret;
|
|
u32 val;
|
|
|
|
/* Program REF_CLK source */
|
|
val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
|
|
val &= ~BIT(1);
|
|
writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
|
|
|
|
usleep_range(1000, 2000);
|
|
|
|
/* Don't use PAD for refclock */
|
|
val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
|
|
val &= ~BIT(0);
|
|
writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
|
|
|
|
/* Program SSP ENABLE */
|
|
val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL3);
|
|
val |= BIT(0);
|
|
writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL3);
|
|
|
|
usleep_range(1000, 2000);
|
|
|
|
/* Assert Phy SW Reset */
|
|
val = readl(qphy->base + PCIE2_PHY_RESET_CTRL);
|
|
val |= BIT(0);
|
|
writel(val, qphy->base + PCIE2_PHY_RESET_CTRL);
|
|
|
|
/* Program Tx Amplitude */
|
|
val = readl(qphy->base + PCIE20_PARF_PCS_SWING_CTRL1);
|
|
val &= ~0x7f;
|
|
val |= TX_AMP_VAL;
|
|
writel(val, qphy->base + PCIE20_PARF_PCS_SWING_CTRL1);
|
|
|
|
val = readl(qphy->base + PCIE20_PARF_PCS_SWING_CTRL2);
|
|
val &= ~0x7f;
|
|
val |= TX_AMP_VAL;
|
|
writel(val, qphy->base + PCIE20_PARF_PCS_SWING_CTRL2);
|
|
|
|
/* Program De-Emphasis */
|
|
val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH1);
|
|
val &= ~0x3f;
|
|
val |= TX_DEEMPH_GEN2_6DB_VAL;
|
|
writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH1);
|
|
|
|
val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH2);
|
|
val &= ~0x3f;
|
|
val |= TX_DEEMPH_GEN2_3_5DB_VAL;
|
|
writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH2);
|
|
|
|
val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH3);
|
|
val &= ~0x3f;
|
|
val |= TX_DEEMPH_GEN1_VAL;
|
|
writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH3);
|
|
|
|
/* Program Rx_Eq */
|
|
val = readl(qphy->base + PCIE20_PARF_CONFIGBITS);
|
|
val &= ~0x7;
|
|
val |= PHY_RX0_EQ_GEN2_VAL;
|
|
writel(val, qphy->base + PCIE20_PARF_CONFIGBITS);
|
|
|
|
/* Program Tx0_term_offset */
|
|
val = readl(qphy->base + PCIE20_PARF_PHY_CTRL3);
|
|
val &= ~0x1f;
|
|
val |= PHY_TX0_TERM_OFFST_VAL;
|
|
writel(val, qphy->base + PCIE20_PARF_PHY_CTRL3);
|
|
|
|
/* disable Tx2Rx Loopback */
|
|
val = readl(qphy->base + PCIE20_PARF_PCS_CTRL);
|
|
val &= ~BIT(1);
|
|
writel(val, qphy->base + PCIE20_PARF_PCS_CTRL);
|
|
|
|
/* De-assert Phy SW Reset */
|
|
val = readl(qphy->base + PCIE2_PHY_RESET_CTRL);
|
|
val &= ~BIT(0);
|
|
writel(val, qphy->base + PCIE2_PHY_RESET_CTRL);
|
|
|
|
usleep_range(1000, 2000);
|
|
|
|
ret = reset_control_deassert(qphy->pipe_reset);
|
|
if (ret) {
|
|
dev_err(qphy->dev, "cannot deassert pipe reset\n");
|
|
goto out;
|
|
}
|
|
|
|
clk_set_rate(qphy->pipe_clk, 250000000);
|
|
|
|
ret = clk_prepare_enable(qphy->pipe_clk);
|
|
if (ret) {
|
|
dev_err(qphy->dev, "failed to enable pipe clock\n");
|
|
goto out;
|
|
}
|
|
|
|
ret = readl_poll_timeout(qphy->base + PCIE20_PARF_PHY_STTS, val,
|
|
!(val & BIT(0)), 1000, 10);
|
|
if (ret)
|
|
dev_err(qphy->dev, "phy initialization failed\n");
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int qcom_pcie2_phy_power_off(struct phy *phy)
|
|
{
|
|
struct qcom_phy *qphy = phy_get_drvdata(phy);
|
|
u32 val;
|
|
|
|
val = readl(qphy->base + PCIE2_PHY_RESET_CTRL);
|
|
val |= BIT(0);
|
|
writel(val, qphy->base + PCIE2_PHY_RESET_CTRL);
|
|
|
|
clk_disable_unprepare(qphy->pipe_clk);
|
|
reset_control_assert(qphy->pipe_reset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qcom_pcie2_phy_exit(struct phy *phy)
|
|
{
|
|
struct qcom_phy *qphy = phy_get_drvdata(phy);
|
|
|
|
regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
|
|
reset_control_assert(qphy->phy_reset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops qcom_pcie2_ops = {
|
|
.init = qcom_pcie2_phy_init,
|
|
.power_on = qcom_pcie2_phy_power_on,
|
|
.power_off = qcom_pcie2_phy_power_off,
|
|
.exit = qcom_pcie2_phy_exit,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
/*
|
|
* Register a fixed rate pipe clock.
|
|
*
|
|
* The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
|
|
* controls it. The <s>_pipe_clk coming out of the GCC is requested
|
|
* by the PHY driver for its operations.
|
|
* We register the <s>_pipe_clksrc here. The gcc driver takes care
|
|
* of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
|
|
* Below picture shows this relationship.
|
|
*
|
|
* +---------------+
|
|
* | PHY block |<<---------------------------------------+
|
|
* | | |
|
|
* | +-------+ | +-----+ |
|
|
* I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+
|
|
* clk | +-------+ | +-----+
|
|
* +---------------+
|
|
*/
|
|
static int phy_pipe_clksrc_register(struct qcom_phy *qphy)
|
|
{
|
|
struct device_node *np = qphy->dev->of_node;
|
|
struct clk_fixed_rate *fixed;
|
|
struct clk_init_data init = { };
|
|
int ret;
|
|
|
|
ret = of_property_read_string(np, "clock-output-names", &init.name);
|
|
if (ret) {
|
|
dev_err(qphy->dev, "%s: No clock-output-names\n", np->name);
|
|
return ret;
|
|
}
|
|
|
|
fixed = devm_kzalloc(qphy->dev, sizeof(*fixed), GFP_KERNEL);
|
|
if (!fixed)
|
|
return -ENOMEM;
|
|
|
|
init.ops = &clk_fixed_rate_ops;
|
|
|
|
/* controllers using QMP phys use 250MHz pipe clock interface */
|
|
fixed->fixed_rate = 250000000;
|
|
fixed->hw.init = &init;
|
|
|
|
return devm_clk_hw_register(qphy->dev, &fixed->hw);
|
|
}
|
|
|
|
static int qcom_pcie2_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct phy_provider *phy_provider;
|
|
struct qcom_phy *qphy;
|
|
struct device *dev = &pdev->dev;
|
|
struct phy *phy;
|
|
int ret;
|
|
|
|
qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
|
|
if (!qphy)
|
|
return -ENOMEM;
|
|
|
|
qphy->dev = dev;
|
|
qphy->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(qphy->base))
|
|
return PTR_ERR(qphy->base);
|
|
|
|
ret = phy_pipe_clksrc_register(qphy);
|
|
if (ret) {
|
|
dev_err(dev, "failed to register pipe_clk\n");
|
|
return ret;
|
|
}
|
|
|
|
qphy->vregs[0].supply = "vdda-vp";
|
|
qphy->vregs[1].supply = "vdda-vph";
|
|
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(qphy->vregs), qphy->vregs);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
qphy->pipe_clk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(qphy->pipe_clk)) {
|
|
dev_err(dev, "failed to acquire pipe clock\n");
|
|
return PTR_ERR(qphy->pipe_clk);
|
|
}
|
|
|
|
qphy->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
|
|
if (IS_ERR(qphy->phy_reset)) {
|
|
dev_err(dev, "failed to acquire phy reset\n");
|
|
return PTR_ERR(qphy->phy_reset);
|
|
}
|
|
|
|
qphy->pipe_reset = devm_reset_control_get_exclusive(dev, "pipe");
|
|
if (IS_ERR(qphy->pipe_reset)) {
|
|
dev_err(dev, "failed to acquire pipe reset\n");
|
|
return PTR_ERR(qphy->pipe_reset);
|
|
}
|
|
|
|
phy = devm_phy_create(dev, dev->of_node, &qcom_pcie2_ops);
|
|
if (IS_ERR(phy)) {
|
|
dev_err(dev, "failed to create phy\n");
|
|
return PTR_ERR(phy);
|
|
}
|
|
|
|
phy_set_drvdata(phy, qphy);
|
|
|
|
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
if (IS_ERR(phy_provider))
|
|
dev_err(dev, "failed to register phy provider\n");
|
|
|
|
return PTR_ERR_OR_ZERO(phy_provider);
|
|
}
|
|
|
|
static const struct of_device_id qcom_pcie2_phy_match_table[] = {
|
|
{ .compatible = "qcom,pcie2-phy" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, qcom_pcie2_phy_match_table);
|
|
|
|
static struct platform_driver qcom_pcie2_phy_driver = {
|
|
.probe = qcom_pcie2_phy_probe,
|
|
.driver = {
|
|
.name = "phy-qcom-pcie2",
|
|
.of_match_table = qcom_pcie2_phy_match_table,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(qcom_pcie2_phy_driver);
|
|
|
|
MODULE_DESCRIPTION("Qualcomm PCIe PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|