279 строки
6.9 KiB
C
279 строки
6.9 KiB
C
/*
|
|
* Copyright 2011, Netlogic Microsystems Inc.
|
|
* Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/io.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
/* XLR I2C REGISTERS */
|
|
#define XLR_I2C_CFG 0x00
|
|
#define XLR_I2C_CLKDIV 0x01
|
|
#define XLR_I2C_DEVADDR 0x02
|
|
#define XLR_I2C_ADDR 0x03
|
|
#define XLR_I2C_DATAOUT 0x04
|
|
#define XLR_I2C_DATAIN 0x05
|
|
#define XLR_I2C_STATUS 0x06
|
|
#define XLR_I2C_STARTXFR 0x07
|
|
#define XLR_I2C_BYTECNT 0x08
|
|
#define XLR_I2C_HDSTATIM 0x09
|
|
|
|
/* XLR I2C REGISTERS FLAGS */
|
|
#define XLR_I2C_BUS_BUSY 0x01
|
|
#define XLR_I2C_SDOEMPTY 0x02
|
|
#define XLR_I2C_RXRDY 0x04
|
|
#define XLR_I2C_ACK_ERR 0x08
|
|
#define XLR_I2C_ARB_STARTERR 0x30
|
|
|
|
/* Register Values */
|
|
#define XLR_I2C_CFG_ADDR 0xF8
|
|
#define XLR_I2C_CFG_NOADDR 0xFA
|
|
#define XLR_I2C_STARTXFR_ND 0x02 /* No Data */
|
|
#define XLR_I2C_STARTXFR_RD 0x01 /* Read */
|
|
#define XLR_I2C_STARTXFR_WR 0x00 /* Write */
|
|
|
|
#define XLR_I2C_TIMEOUT 10 /* timeout per byte in msec */
|
|
|
|
/*
|
|
* On XLR/XLS, we need to use __raw_ IO to read the I2C registers
|
|
* because they are in the big-endian MMIO area on the SoC.
|
|
*
|
|
* The readl/writel implementation on XLR/XLS byteswaps, because
|
|
* those are for its little-endian PCI space (see arch/mips/Kconfig).
|
|
*/
|
|
static inline void xlr_i2c_wreg(u32 __iomem *base, unsigned int reg, u32 val)
|
|
{
|
|
__raw_writel(val, base + reg);
|
|
}
|
|
|
|
static inline u32 xlr_i2c_rdreg(u32 __iomem *base, unsigned int reg)
|
|
{
|
|
return __raw_readl(base + reg);
|
|
}
|
|
|
|
struct xlr_i2c_private {
|
|
struct i2c_adapter adap;
|
|
u32 __iomem *iobase;
|
|
};
|
|
|
|
static int xlr_i2c_tx(struct xlr_i2c_private *priv, u16 len,
|
|
u8 *buf, u16 addr)
|
|
{
|
|
struct i2c_adapter *adap = &priv->adap;
|
|
unsigned long timeout, stoptime, checktime;
|
|
u32 i2c_status;
|
|
int pos, timedout;
|
|
u8 offset, byte;
|
|
|
|
offset = buf[0];
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_ADDR, offset);
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr);
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, XLR_I2C_CFG_ADDR);
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1);
|
|
|
|
timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT);
|
|
stoptime = jiffies + timeout;
|
|
timedout = 0;
|
|
pos = 1;
|
|
retry:
|
|
if (len == 1) {
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR,
|
|
XLR_I2C_STARTXFR_ND);
|
|
} else {
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, buf[pos]);
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR,
|
|
XLR_I2C_STARTXFR_WR);
|
|
}
|
|
|
|
while (!timedout) {
|
|
checktime = jiffies;
|
|
i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS);
|
|
|
|
if (i2c_status & XLR_I2C_SDOEMPTY) {
|
|
pos++;
|
|
/* need to do a empty dataout after the last byte */
|
|
byte = (pos < len) ? buf[pos] : 0;
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, byte);
|
|
|
|
/* reset timeout on successful xmit */
|
|
stoptime = jiffies + timeout;
|
|
}
|
|
timedout = time_after(checktime, stoptime);
|
|
|
|
if (i2c_status & XLR_I2C_ARB_STARTERR) {
|
|
if (timedout)
|
|
break;
|
|
goto retry;
|
|
}
|
|
|
|
if (i2c_status & XLR_I2C_ACK_ERR)
|
|
return -EIO;
|
|
|
|
if ((i2c_status & XLR_I2C_BUS_BUSY) == 0 && pos >= len)
|
|
return 0;
|
|
}
|
|
dev_err(&adap->dev, "I2C transmit timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int xlr_i2c_rx(struct xlr_i2c_private *priv, u16 len, u8 *buf, u16 addr)
|
|
{
|
|
struct i2c_adapter *adap = &priv->adap;
|
|
u32 i2c_status;
|
|
unsigned long timeout, stoptime, checktime;
|
|
int nbytes, timedout;
|
|
u8 byte;
|
|
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, XLR_I2C_CFG_NOADDR);
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len);
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr);
|
|
|
|
timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT);
|
|
stoptime = jiffies + timeout;
|
|
timedout = 0;
|
|
nbytes = 0;
|
|
retry:
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, XLR_I2C_STARTXFR_RD);
|
|
|
|
while (!timedout) {
|
|
checktime = jiffies;
|
|
i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS);
|
|
if (i2c_status & XLR_I2C_RXRDY) {
|
|
if (nbytes > len)
|
|
return -EIO; /* should not happen */
|
|
|
|
/* we need to do a dummy datain when nbytes == len */
|
|
byte = xlr_i2c_rdreg(priv->iobase, XLR_I2C_DATAIN);
|
|
if (nbytes < len)
|
|
buf[nbytes] = byte;
|
|
nbytes++;
|
|
|
|
/* reset timeout on successful read */
|
|
stoptime = jiffies + timeout;
|
|
}
|
|
|
|
timedout = time_after(checktime, stoptime);
|
|
if (i2c_status & XLR_I2C_ARB_STARTERR) {
|
|
if (timedout)
|
|
break;
|
|
goto retry;
|
|
}
|
|
|
|
if (i2c_status & XLR_I2C_ACK_ERR)
|
|
return -EIO;
|
|
|
|
if ((i2c_status & XLR_I2C_BUS_BUSY) == 0)
|
|
return 0;
|
|
}
|
|
|
|
dev_err(&adap->dev, "I2C receive timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int xlr_i2c_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
struct i2c_msg *msg;
|
|
int i;
|
|
int ret = 0;
|
|
struct xlr_i2c_private *priv = i2c_get_adapdata(adap);
|
|
|
|
for (i = 0; ret == 0 && i < num; i++) {
|
|
msg = &msgs[i];
|
|
if (msg->flags & I2C_M_RD)
|
|
ret = xlr_i2c_rx(priv, msg->len, &msg->buf[0],
|
|
msg->addr);
|
|
else
|
|
ret = xlr_i2c_tx(priv, msg->len, &msg->buf[0],
|
|
msg->addr);
|
|
}
|
|
|
|
return (ret != 0) ? ret : num;
|
|
}
|
|
|
|
static u32 xlr_func(struct i2c_adapter *adap)
|
|
{
|
|
/* Emulate SMBUS over I2C */
|
|
return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
|
|
}
|
|
|
|
static struct i2c_algorithm xlr_i2c_algo = {
|
|
.master_xfer = xlr_i2c_xfer,
|
|
.functionality = xlr_func,
|
|
};
|
|
|
|
static int __devinit xlr_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct xlr_i2c_private *priv;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->iobase = devm_request_and_ioremap(&pdev->dev, res);
|
|
if (!priv->iobase) {
|
|
dev_err(&pdev->dev, "devm_request_and_ioremap failed\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
priv->adap.dev.parent = &pdev->dev;
|
|
priv->adap.owner = THIS_MODULE;
|
|
priv->adap.algo_data = priv;
|
|
priv->adap.algo = &xlr_i2c_algo;
|
|
priv->adap.nr = pdev->id;
|
|
priv->adap.class = I2C_CLASS_HWMON;
|
|
snprintf(priv->adap.name, sizeof(priv->adap.name), "xlr-i2c");
|
|
|
|
i2c_set_adapdata(&priv->adap, priv);
|
|
ret = i2c_add_numbered_adapter(&priv->adap);
|
|
if (ret < 0) {
|
|
dev_err(&priv->adap.dev, "Failed to add i2c bus.\n");
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
dev_info(&priv->adap.dev, "Added I2C Bus.\n");
|
|
return 0;
|
|
}
|
|
|
|
static int __devexit xlr_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct xlr_i2c_private *priv;
|
|
|
|
priv = platform_get_drvdata(pdev);
|
|
i2c_del_adapter(&priv->adap);
|
|
platform_set_drvdata(pdev, NULL);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver xlr_i2c_driver = {
|
|
.probe = xlr_i2c_probe,
|
|
.remove = __devexit_p(xlr_i2c_remove),
|
|
.driver = {
|
|
.name = "xlr-i2cbus",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(xlr_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@netlogicmicro.com>");
|
|
MODULE_DESCRIPTION("XLR/XLS SoC I2C Controller driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:xlr-i2cbus");
|