microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/media/video/cpia2/cpia2_usb.c

915 строки
25 KiB
C
Исходник Ответственный История

/****************************************************************************
*
* Filename: cpia2_usb.c
*
* Copyright 2001, STMicrolectronics, Inc.
* Contact: steve.miller@st.com
*
* Description:
* This is a USB driver for CPia2 based video cameras.
* The infrastructure of this driver is based on the cpia usb driver by
* Jochen Scharrlach and Johannes Erdfeldt.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Stripped of 2.4 stuff ready for main kernel submit by
* Alan Cox <alan@lxorguk.ukuu.org.uk>
****************************************************************************/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include "cpia2.h"
static int frame_sizes[] = {
0, // USBIF_CMDONLY
0, // USBIF_BULK
128, // USBIF_ISO_1
384, // USBIF_ISO_2
640, // USBIF_ISO_3
768, // USBIF_ISO_4
896, // USBIF_ISO_5
1023, // USBIF_ISO_6
};
#define FRAMES_PER_DESC 10
#define FRAME_SIZE_PER_DESC frame_sizes[cam->cur_alt]
static void process_frame(struct camera_data *cam);
static void cpia2_usb_complete(struct urb *urb);
static int cpia2_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id);
static void cpia2_usb_disconnect(struct usb_interface *intf);
static void free_sbufs(struct camera_data *cam);
static void add_APPn(struct camera_data *cam);
static void add_COM(struct camera_data *cam);
static int submit_urbs(struct camera_data *cam);
static int set_alternate(struct camera_data *cam, unsigned int alt);
static int configure_transfer_mode(struct camera_data *cam, unsigned int alt);
static struct usb_device_id cpia2_id_table[] = {
{USB_DEVICE(0x0553, 0x0100)},
{USB_DEVICE(0x0553, 0x0140)},
{USB_DEVICE(0x0553, 0x0151)}, /* STV0676 */
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, cpia2_id_table);
static struct usb_driver cpia2_driver = {
.name = "cpia2",
.probe = cpia2_usb_probe,
.disconnect = cpia2_usb_disconnect,
.id_table = cpia2_id_table
};
/******************************************************************************
*
* process_frame
*
*****************************************************************************/
static void process_frame(struct camera_data *cam)
{
static int frame_count;
unsigned char *inbuff = cam->workbuff->data;
DBG("Processing frame #%d, current:%d\n",
cam->workbuff->num, cam->curbuff->num);
if(cam->workbuff->length > cam->workbuff->max_length)
cam->workbuff->max_length = cam->workbuff->length;
if ((inbuff[0] == 0xFF) && (inbuff[1] == 0xD8)) {
frame_count++;
} else {
cam->workbuff->status = FRAME_ERROR;
DBG("Start of frame not found\n");
return;
}
/***
* Now the output buffer should have a JPEG image in it.
***/
if(!cam->first_image_seen) {
/* Always skip the first image after streaming
* starts. It is almost certainly corrupt. */
cam->first_image_seen = 1;
cam->workbuff->status = FRAME_EMPTY;
return;
}
if (cam->workbuff->length > 3) {
if(cam->mmapped &&
cam->workbuff->length < cam->workbuff->max_length) {
/* No junk in the buffers */
memset(cam->workbuff->data+cam->workbuff->length,
0, cam->workbuff->max_length-
cam->workbuff->length);
}
cam->workbuff->max_length = cam->workbuff->length;
cam->workbuff->status = FRAME_READY;
if(!cam->mmapped && cam->num_frames > 2) {
/* During normal reading, the most recent
* frame will be read. If the current frame
* hasn't started reading yet, it will never
* be read, so mark it empty. If the buffer is
* mmapped, or we have few buffers, we need to
* wait for the user to free the buffer.
*
* NOTE: This is not entirely foolproof with 3
* buffers, but it would take an EXTREMELY
* overloaded system to cause problems (possible
* image data corruption). Basically, it would
* need to take more time to execute cpia2_read
* than it would for the camera to send
* cam->num_frames-2 frames before problems
* could occur.
*/
cam->curbuff->status = FRAME_EMPTY;
}
cam->curbuff = cam->workbuff;
cam->workbuff = cam->workbuff->next;
DBG("Changed buffers, work:%d, current:%d\n",
cam->workbuff->num, cam->curbuff->num);
return;
} else {
DBG("Not enough data for an image.\n");
}
cam->workbuff->status = FRAME_ERROR;
return;
}
/******************************************************************************
*
* add_APPn
*
* Adds a user specified APPn record
*****************************************************************************/
static void add_APPn(struct camera_data *cam)
{
if(cam->APP_len > 0) {
cam->workbuff->data[cam->workbuff->length++] = 0xFF;
cam->workbuff->data[cam->workbuff->length++] = 0xE0+cam->APPn;
cam->workbuff->data[cam->workbuff->length++] = 0;
cam->workbuff->data[cam->workbuff->length++] = cam->APP_len+2;
memcpy(cam->workbuff->data+cam->workbuff->length,
cam->APP_data, cam->APP_len);
cam->workbuff->length += cam->APP_len;
}
}
/******************************************************************************
*
* add_COM
*
* Adds a user specified COM record
*****************************************************************************/
static void add_COM(struct camera_data *cam)
{
if(cam->COM_len > 0) {
cam->workbuff->data[cam->workbuff->length++] = 0xFF;
cam->workbuff->data[cam->workbuff->length++] = 0xFE;
cam->workbuff->data[cam->workbuff->length++] = 0;
cam->workbuff->data[cam->workbuff->length++] = cam->COM_len+2;
memcpy(cam->workbuff->data+cam->workbuff->length,
cam->COM_data, cam->COM_len);
cam->workbuff->length += cam->COM_len;
}
}
/******************************************************************************
*
* cpia2_usb_complete
*
* callback when incoming packet is received
*****************************************************************************/
static void cpia2_usb_complete(struct urb *urb)
{
int i;
unsigned char *cdata;
static int frame_ready = false;
struct camera_data *cam = (struct camera_data *) urb->context;
if (urb->status!=0) {
if (!(urb->status == -ENOENT ||
urb->status == -ECONNRESET ||
urb->status == -ESHUTDOWN))
{
DBG("urb->status = %d!\n", urb->status);
}
DBG("Stopping streaming\n");
return;
}
if (!cam->streaming || !cam->present || cam->open_count == 0) {
LOG("Will now stop the streaming: streaming = %d, "
"present=%d, open_count=%d\n",
cam->streaming, cam->present, cam->open_count);
return;
}
/***
* Packet collater
***/
//DBG("Collating %d packets\n", urb->number_of_packets);
for (i = 0; i < urb->number_of_packets; i++) {
u16 checksum, iso_checksum;
int j;
int n = urb->iso_frame_desc[i].actual_length;
int st = urb->iso_frame_desc[i].status;
if(cam->workbuff->status == FRAME_READY) {
struct framebuf *ptr;
/* Try to find an available buffer */
DBG("workbuff full, searching\n");
for (ptr = cam->workbuff->next;
ptr != cam->workbuff;
ptr = ptr->next)
{
if (ptr->status == FRAME_EMPTY) {
ptr->status = FRAME_READING;
ptr->length = 0;
break;
}
}
if (ptr == cam->workbuff)
break; /* No READING or EMPTY buffers left */
cam->workbuff = ptr;
}
if (cam->workbuff->status == FRAME_EMPTY ||
cam->workbuff->status == FRAME_ERROR) {
cam->workbuff->status = FRAME_READING;
cam->workbuff->length = 0;
}
//DBG(" Packet %d length = %d, status = %d\n", i, n, st);
cdata = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
if (st) {
LOG("cpia2 data error: [%d] len=%d, status = %d\n",
i, n, st);
if(!ALLOW_CORRUPT)
cam->workbuff->status = FRAME_ERROR;
continue;
}
if(n<=2)
continue;
checksum = 0;
for(j=0; j<n-2; ++j)
checksum += cdata[j];
iso_checksum = cdata[j] + cdata[j+1]*256;
if(checksum != iso_checksum) {
LOG("checksum mismatch: [%d] len=%d, calculated = %x, checksum = %x\n",
i, n, (int)checksum, (int)iso_checksum);
if(!ALLOW_CORRUPT) {
cam->workbuff->status = FRAME_ERROR;
continue;
}
}
n -= 2;
if(cam->workbuff->status != FRAME_READING) {
if((0xFF == cdata[0] && 0xD8 == cdata[1]) ||
(0xD8 == cdata[0] && 0xFF == cdata[1] &&
0 != cdata[2])) {
/* frame is skipped, but increment total
* frame count anyway */
cam->frame_count++;
}
DBG("workbuff not reading, status=%d\n",
cam->workbuff->status);
continue;
}
if (cam->frame_size < cam->workbuff->length + n) {
ERR("buffer overflow! length: %d, n: %d\n",
cam->workbuff->length, n);
cam->workbuff->status = FRAME_ERROR;
if(cam->workbuff->length > cam->workbuff->max_length)
cam->workbuff->max_length =
cam->workbuff->length;
continue;
}
if (cam->workbuff->length == 0) {
int data_offset;
if ((0xD8 == cdata[0]) && (0xFF == cdata[1])) {
data_offset = 1;
} else if((0xFF == cdata[0]) && (0xD8 == cdata[1])
&& (0xFF == cdata[2])) {
data_offset = 2;
} else {
DBG("Ignoring packet, not beginning!\n");
continue;
}
DBG("Start of frame pattern found\n");
do_gettimeofday(&cam->workbuff->timestamp);
cam->workbuff->seq = cam->frame_count++;
cam->workbuff->data[0] = 0xFF;
cam->workbuff->data[1] = 0xD8;
cam->workbuff->length = 2;
add_APPn(cam);
add_COM(cam);
memcpy(cam->workbuff->data+cam->workbuff->length,
cdata+data_offset, n-data_offset);
cam->workbuff->length += n-data_offset;
} else if (cam->workbuff->length > 0) {
memcpy(cam->workbuff->data + cam->workbuff->length,
cdata, n);
cam->workbuff->length += n;
}
if ((cam->workbuff->length >= 3) &&
(cam->workbuff->data[cam->workbuff->length - 3] == 0xFF) &&
(cam->workbuff->data[cam->workbuff->length - 2] == 0xD9) &&
(cam->workbuff->data[cam->workbuff->length - 1] == 0xFF)) {
frame_ready = true;
cam->workbuff->data[cam->workbuff->length - 1] = 0;
cam->workbuff->length -= 1;
} else if ((cam->workbuff->length >= 2) &&
(cam->workbuff->data[cam->workbuff->length - 2] == 0xFF) &&
(cam->workbuff->data[cam->workbuff->length - 1] == 0xD9)) {
frame_ready = true;
}
if (frame_ready) {
DBG("Workbuff image size = %d\n",cam->workbuff->length);
process_frame(cam);
frame_ready = false;
if (waitqueue_active(&cam->wq_stream))
wake_up_interruptible(&cam->wq_stream);
}
}
if(cam->streaming) {
/* resubmit */
urb->dev = cam->dev;
if ((i = usb_submit_urb(urb, GFP_ATOMIC)) != 0)
ERR("%s: usb_submit_urb ret %d!\n", __func__, i);
}
}
/******************************************************************************
*
* configure_transfer_mode
*
*****************************************************************************/
static int configure_transfer_mode(struct camera_data *cam, unsigned int alt)
{
static unsigned char iso_regs[8][4] = {
{0x00, 0x00, 0x00, 0x00},
{0x00, 0x00, 0x00, 0x00},
{0xB9, 0x00, 0x00, 0x7E},
{0xB9, 0x00, 0x01, 0x7E},
{0xB9, 0x00, 0x02, 0x7E},
{0xB9, 0x00, 0x02, 0xFE},
{0xB9, 0x00, 0x03, 0x7E},
{0xB9, 0x00, 0x03, 0xFD}
};
struct cpia2_command cmd;
unsigned char reg;
if(!cam->present)
return -ENODEV;
/***
* Write the isoc registers according to the alternate selected
***/
cmd.direction = TRANSFER_WRITE;
cmd.buffer.block_data[0] = iso_regs[alt][0];
cmd.buffer.block_data[1] = iso_regs[alt][1];
cmd.buffer.block_data[2] = iso_regs[alt][2];
cmd.buffer.block_data[3] = iso_regs[alt][3];
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
cmd.start = CPIA2_VC_USB_ISOLIM;
cmd.reg_count = 4;
cpia2_send_command(cam, &cmd);
/***
* Enable relevant streams before starting polling.
* First read USB Stream Config Register.
***/
cmd.direction = TRANSFER_READ;
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
cmd.start = CPIA2_VC_USB_STRM;
cmd.reg_count = 1;
cpia2_send_command(cam, &cmd);
reg = cmd.buffer.block_data[0];
/* Clear iso, bulk, and int */
reg &= ~(CPIA2_VC_USB_STRM_BLK_ENABLE |
CPIA2_VC_USB_STRM_ISO_ENABLE |
CPIA2_VC_USB_STRM_INT_ENABLE);
if (alt == USBIF_BULK) {
DBG("Enabling bulk xfer\n");
reg |= CPIA2_VC_USB_STRM_BLK_ENABLE; /* Enable Bulk */
cam->xfer_mode = XFER_BULK;
} else if (alt >= USBIF_ISO_1) {
DBG("Enabling ISOC xfer\n");
reg |= CPIA2_VC_USB_STRM_ISO_ENABLE;
cam->xfer_mode = XFER_ISOC;
}
cmd.buffer.block_data[0] = reg;
cmd.direction = TRANSFER_WRITE;
cmd.start = CPIA2_VC_USB_STRM;
cmd.reg_count = 1;
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
cpia2_send_command(cam, &cmd);
return 0;
}
/******************************************************************************
*
* cpia2_usb_change_streaming_alternate
*
*****************************************************************************/
int cpia2_usb_change_streaming_alternate(struct camera_data *cam,
unsigned int alt)
{
int ret = 0;
if(alt < USBIF_ISO_1 || alt > USBIF_ISO_6)
return -EINVAL;
if(alt == cam->params.camera_state.stream_mode)
return 0;
cpia2_usb_stream_pause(cam);
configure_transfer_mode(cam, alt);
cam->params.camera_state.stream_mode = alt;
/* Reset the camera to prevent image quality degradation */
cpia2_reset_camera(cam);
cpia2_usb_stream_resume(cam);
return ret;
}
/******************************************************************************
*
* set_alternate
*
*****************************************************************************/
static int set_alternate(struct camera_data *cam, unsigned int alt)
{
int ret = 0;
if(alt == cam->cur_alt)
return 0;
if (cam->cur_alt != USBIF_CMDONLY) {
DBG("Changing from alt %d to %d\n", cam->cur_alt, USBIF_CMDONLY);
ret = usb_set_interface(cam->dev, cam->iface, USBIF_CMDONLY);
if (ret != 0)
return ret;
}
if (alt != USBIF_CMDONLY) {
DBG("Changing from alt %d to %d\n", USBIF_CMDONLY, alt);
ret = usb_set_interface(cam->dev, cam->iface, alt);
if (ret != 0)
return ret;
}
cam->old_alt = cam->cur_alt;
cam->cur_alt = alt;
return ret;
}
/******************************************************************************
*
* free_sbufs
*
* Free all cam->sbuf[]. All non-NULL .data and .urb members that are non-NULL
* are assumed to be allocated. Non-NULL .urb members are also assumed to be
* submitted (and must therefore be killed before they are freed).
*****************************************************************************/
static void free_sbufs(struct camera_data *cam)
{
int i;
for (i = 0; i < NUM_SBUF; i++) {
if(cam->sbuf[i].urb) {
usb_kill_urb(cam->sbuf[i].urb);
usb_free_urb(cam->sbuf[i].urb);
cam->sbuf[i].urb = NULL;
}
if(cam->sbuf[i].data) {
kfree(cam->sbuf[i].data);
cam->sbuf[i].data = NULL;
}
}
}
/*******
* Convenience functions
*******/
/****************************************************************************
*
* write_packet
*
***************************************************************************/
static int write_packet(struct usb_device *udev,
u8 request, u8 * registers, u16 start, size_t size)
{
if (!registers || size <= 0)
return -EINVAL;
return usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
request,
USB_TYPE_VENDOR | USB_RECIP_DEVICE,
start, /* value */
0, /* index */
registers, /* buffer */
size,
HZ);
}
/****************************************************************************
*
* read_packet
*
***************************************************************************/
static int read_packet(struct usb_device *udev,
u8 request, u8 * registers, u16 start, size_t size)
{
if (!registers || size <= 0)
return -EINVAL;
return usb_control_msg(udev,
usb_rcvctrlpipe(udev, 0),
request,
USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_DEVICE,
start, /* value */
0, /* index */
registers, /* buffer */
size,
HZ);
}
/******************************************************************************
*
* cpia2_usb_transfer_cmd
*
*****************************************************************************/
int cpia2_usb_transfer_cmd(struct camera_data *cam,
void *registers,
u8 request, u8 start, u8 count, u8 direction)
{
int err = 0;
struct usb_device *udev = cam->dev;
if (!udev) {
ERR("%s: Internal driver error: udev is NULL\n", __func__);
return -EINVAL;
}
if (!registers) {
ERR("%s: Internal driver error: register array is NULL\n", __func__);
return -EINVAL;
}
if (direction == TRANSFER_READ) {
err = read_packet(udev, request, (u8 *)registers, start, count);
if (err > 0)
err = 0;
} else if (direction == TRANSFER_WRITE) {
err =write_packet(udev, request, (u8 *)registers, start, count);
if (err < 0) {
LOG("Control message failed, err val = %d\n", err);
LOG("Message: request = 0x%0X, start = 0x%0X\n",
request, start);
LOG("Message: count = %d, register[0] = 0x%0X\n",
count, ((unsigned char *) registers)[0]);
} else
err=0;
} else {
LOG("Unexpected first byte of direction: %d\n",
direction);
return -EINVAL;
}
if(err != 0)
LOG("Unexpected error: %d\n", err);
return err;
}
/******************************************************************************
*
* submit_urbs
*
*****************************************************************************/
static int submit_urbs(struct camera_data *cam)
{
struct urb *urb;
int fx, err, i, j;
for(i=0; i<NUM_SBUF; ++i) {
if (cam->sbuf[i].data)
continue;
cam->sbuf[i].data =
kmalloc(FRAMES_PER_DESC * FRAME_SIZE_PER_DESC, GFP_KERNEL);
if (!cam->sbuf[i].data) {
while (--i >= 0) {
kfree(cam->sbuf[i].data);
cam->sbuf[i].data = NULL;
}
return -ENOMEM;
}
}
/* We double buffer the Isoc lists, and also know the polling
* interval is every frame (1 == (1 << (bInterval -1))).
*/
for(i=0; i<NUM_SBUF; ++i) {
if(cam->sbuf[i].urb) {
continue;
}
urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
if (!urb) {
ERR("%s: usb_alloc_urb error!\n", __func__);
for (j = 0; j < i; j++)
usb_free_urb(cam->sbuf[j].urb);
return -ENOMEM;
}
cam->sbuf[i].urb = urb;
urb->dev = cam->dev;
urb->context = cam;
urb->pipe = usb_rcvisocpipe(cam->dev, 1 /*ISOC endpoint*/);
urb->transfer_flags = URB_ISO_ASAP;
urb->transfer_buffer = cam->sbuf[i].data;
urb->complete = cpia2_usb_complete;
urb->number_of_packets = FRAMES_PER_DESC;
urb->interval = 1;
urb->transfer_buffer_length =
FRAME_SIZE_PER_DESC * FRAMES_PER_DESC;
for (fx = 0; fx < FRAMES_PER_DESC; fx++) {
urb->iso_frame_desc[fx].offset =
FRAME_SIZE_PER_DESC * fx;
urb->iso_frame_desc[fx].length = FRAME_SIZE_PER_DESC;
}
}
/* Queue the ISO urbs, and resubmit in the completion handler */
for(i=0; i<NUM_SBUF; ++i) {
err = usb_submit_urb(cam->sbuf[i].urb, GFP_KERNEL);
if (err) {
ERR("usb_submit_urb[%d]() = %d\n", i, err);
return err;
}
}
return 0;
}
/******************************************************************************
*
* cpia2_usb_stream_start
*
*****************************************************************************/
int cpia2_usb_stream_start(struct camera_data *cam, unsigned int alternate)
{
int ret;
int old_alt;
if(cam->streaming)
return 0;
if (cam->flush) {
int i;
DBG("Flushing buffers\n");
for(i=0; i<cam->num_frames; ++i) {
cam->buffers[i].status = FRAME_EMPTY;
cam->buffers[i].length = 0;
}
cam->curbuff = &cam->buffers[0];
cam->workbuff = cam->curbuff->next;
cam->flush = false;
}
old_alt = cam->params.camera_state.stream_mode;
cam->params.camera_state.stream_mode = 0;
ret = cpia2_usb_change_streaming_alternate(cam, alternate);
if (ret < 0) {
int ret2;
ERR("cpia2_usb_change_streaming_alternate() = %d!\n", ret);
cam->params.camera_state.stream_mode = old_alt;
ret2 = set_alternate(cam, USBIF_CMDONLY);
if (ret2 < 0) {
ERR("cpia2_usb_change_streaming_alternate(%d) =%d has already "
"failed. Then tried to call "
"set_alternate(USBIF_CMDONLY) = %d.\n",
alternate, ret, ret2);
}
} else {
cam->frame_count = 0;
cam->streaming = 1;
ret = cpia2_usb_stream_resume(cam);
}
return ret;
}
/******************************************************************************
*
* cpia2_usb_stream_pause
*
*****************************************************************************/
int cpia2_usb_stream_pause(struct camera_data *cam)
{
int ret = 0;
if(cam->streaming) {
ret = set_alternate(cam, USBIF_CMDONLY);
free_sbufs(cam);
}
return ret;
}
/******************************************************************************
*
* cpia2_usb_stream_resume
*
*****************************************************************************/
int cpia2_usb_stream_resume(struct camera_data *cam)
{
int ret = 0;
if(cam->streaming) {
cam->first_image_seen = 0;
ret = set_alternate(cam, cam->params.camera_state.stream_mode);
if(ret == 0) {
ret = submit_urbs(cam);
}
}
return ret;
}
/******************************************************************************
*
* cpia2_usb_stream_stop
*
*****************************************************************************/
int cpia2_usb_stream_stop(struct camera_data *cam)
{
int ret;
ret = cpia2_usb_stream_pause(cam);
cam->streaming = 0;
configure_transfer_mode(cam, 0);
return ret;
}
/******************************************************************************
*
* cpia2_usb_probe
*
* Probe and initialize.
*****************************************************************************/
static int cpia2_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_interface_descriptor *interface;
struct camera_data *cam;
int ret;
/* A multi-config CPiA2 camera? */
if (udev->descriptor.bNumConfigurations != 1)
return -ENODEV;
interface = &intf->cur_altsetting->desc;
/* If we get to this point, we found a CPiA2 camera */
LOG("CPiA2 USB camera found\n");
if((cam = cpia2_init_camera_struct()) == NULL)
return -ENOMEM;
cam->dev = udev;
cam->iface = interface->bInterfaceNumber;
ret = set_alternate(cam, USBIF_CMDONLY);
if (ret < 0) {
ERR("%s: usb_set_interface error (ret = %d)\n", __func__, ret);
kfree(cam);
return ret;
}
if ((ret = cpia2_register_camera(cam)) < 0) {
ERR("%s: Failed to register cpia2 camera (ret = %d)\n", __func__, ret);
kfree(cam);
return ret;
}
if((ret = cpia2_init_camera(cam)) < 0) {
ERR("%s: failed to initialize cpia2 camera (ret = %d)\n", __func__, ret);
cpia2_unregister_camera(cam);
kfree(cam);
return ret;
}
LOG(" CPiA Version: %d.%02d (%d.%d)\n",
cam->params.version.firmware_revision_hi,
cam->params.version.firmware_revision_lo,
cam->params.version.asic_id,
cam->params.version.asic_rev);
LOG(" CPiA PnP-ID: %04x:%04x:%04x\n",
cam->params.pnp_id.vendor,
cam->params.pnp_id.product,
cam->params.pnp_id.device_revision);
LOG(" SensorID: %d.(version %d)\n",
cam->params.version.sensor_flags,
cam->params.version.sensor_rev);
usb_set_intfdata(intf, cam);
return 0;
}
/******************************************************************************
*
* cpia2_disconnect
*
*****************************************************************************/
static void cpia2_usb_disconnect(struct usb_interface *intf)
{
struct camera_data *cam = usb_get_intfdata(intf);
usb_set_intfdata(intf, NULL);
cam->present = 0;
DBG("Stopping stream\n");
cpia2_usb_stream_stop(cam);
DBG("Unregistering camera\n");
cpia2_unregister_camera(cam);
if(cam->buffers) {
DBG("Wakeup waiting processes\n");
cam->curbuff->status = FRAME_READY;
cam->curbuff->length = 0;
if (waitqueue_active(&cam->wq_stream))
wake_up_interruptible(&cam->wq_stream);
}
DBG("Releasing interface\n");
usb_driver_release_interface(&cpia2_driver, intf);
if (cam->open_count == 0) {
DBG("Freeing camera structure\n");
kfree(cam);
}
LOG("CPiA2 camera disconnected.\n");
}
/******************************************************************************
*
* usb_cpia2_init
*
*****************************************************************************/
int cpia2_usb_init(void)
{
return usb_register(&cpia2_driver);
}
/******************************************************************************
*
* usb_cpia_cleanup
*
*****************************************************************************/
void cpia2_usb_cleanup(void)
{
schedule_timeout(2 * HZ);
usb_deregister(&cpia2_driver);
}
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку