793 строки
19 KiB
C
793 строки
19 KiB
C
/*
|
|
* Driver for SiliconFile NOON010PC30 CIF (1/11") Image Sensor with ISP
|
|
*
|
|
* Copyright (C) 2010 Samsung Electronics
|
|
* Contact: Sylwester Nawrocki, <s.nawrocki@samsung.com>
|
|
*
|
|
* Initial register configuration based on a driver authored by
|
|
* HeungJun Kim <riverful.kim@samsung.com>.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later vergsion.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <media/noon010pc30.h>
|
|
#include <media/v4l2-chip-ident.h>
|
|
#include <linux/videodev2.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-mediabus.h>
|
|
#include <media/v4l2-subdev.h>
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Enable module debug trace. Set to 1 to enable.");
|
|
|
|
#define MODULE_NAME "NOON010PC30"
|
|
|
|
/*
|
|
* Register offsets within a page
|
|
* b15..b8 - page id, b7..b0 - register address
|
|
*/
|
|
#define POWER_CTRL_REG 0x0001
|
|
#define PAGEMODE_REG 0x03
|
|
#define DEVICE_ID_REG 0x0004
|
|
#define NOON010PC30_ID 0x86
|
|
#define VDO_CTL_REG(n) (0x0010 + (n))
|
|
#define SYNC_CTL_REG 0x0012
|
|
/* Window size and position */
|
|
#define WIN_ROWH_REG 0x0013
|
|
#define WIN_ROWL_REG 0x0014
|
|
#define WIN_COLH_REG 0x0015
|
|
#define WIN_COLL_REG 0x0016
|
|
#define WIN_HEIGHTH_REG 0x0017
|
|
#define WIN_HEIGHTL_REG 0x0018
|
|
#define WIN_WIDTHH_REG 0x0019
|
|
#define WIN_WIDTHL_REG 0x001A
|
|
#define HBLANKH_REG 0x001B
|
|
#define HBLANKL_REG 0x001C
|
|
#define VSYNCH_REG 0x001D
|
|
#define VSYNCL_REG 0x001E
|
|
/* VSYNC control */
|
|
#define VS_CTL_REG(n) (0x00A1 + (n))
|
|
/* page 1 */
|
|
#define ISP_CTL_REG(n) (0x0110 + (n))
|
|
#define YOFS_REG 0x0119
|
|
#define DARK_YOFS_REG 0x011A
|
|
#define SAT_CTL_REG 0x0120
|
|
#define BSAT_REG 0x0121
|
|
#define RSAT_REG 0x0122
|
|
/* Color correction */
|
|
#define CMC_CTL_REG 0x0130
|
|
#define CMC_OFSGH_REG 0x0133
|
|
#define CMC_OFSGL_REG 0x0135
|
|
#define CMC_SIGN_REG 0x0136
|
|
#define CMC_GOFS_REG 0x0137
|
|
#define CMC_COEF_REG(n) (0x0138 + (n))
|
|
#define CMC_OFS_REG(n) (0x0141 + (n))
|
|
/* Gamma correction */
|
|
#define GMA_CTL_REG 0x0160
|
|
#define GMA_COEF_REG(n) (0x0161 + (n))
|
|
/* Lens Shading */
|
|
#define LENS_CTRL_REG 0x01D0
|
|
#define LENS_XCEN_REG 0x01D1
|
|
#define LENS_YCEN_REG 0x01D2
|
|
#define LENS_RC_REG 0x01D3
|
|
#define LENS_GC_REG 0x01D4
|
|
#define LENS_BC_REG 0x01D5
|
|
#define L_AGON_REG 0x01D6
|
|
#define L_AGOFF_REG 0x01D7
|
|
/* Page 3 - Auto Exposure */
|
|
#define AE_CTL_REG(n) (0x0310 + (n))
|
|
#define AE_CTL9_REG 0x032C
|
|
#define AE_CTL10_REG 0x032D
|
|
#define AE_YLVL_REG 0x031C
|
|
#define AE_YTH_REG(n) (0x031D + (n))
|
|
#define AE_WGT_REG 0x0326
|
|
#define EXP_TIMEH_REG 0x0333
|
|
#define EXP_TIMEM_REG 0x0334
|
|
#define EXP_TIMEL_REG 0x0335
|
|
#define EXP_MMINH_REG 0x0336
|
|
#define EXP_MMINL_REG 0x0337
|
|
#define EXP_MMAXH_REG 0x0338
|
|
#define EXP_MMAXM_REG 0x0339
|
|
#define EXP_MMAXL_REG 0x033A
|
|
/* Page 4 - Auto White Balance */
|
|
#define AWB_CTL_REG(n) (0x0410 + (n))
|
|
#define AWB_ENABE 0x80
|
|
#define AWB_WGHT_REG 0x0419
|
|
#define BGAIN_PAR_REG(n) (0x044F + (n))
|
|
/* Manual white balance, when AWB_CTL2[0]=1 */
|
|
#define MWB_RGAIN_REG 0x0466
|
|
#define MWB_BGAIN_REG 0x0467
|
|
|
|
/* The token to mark an array end */
|
|
#define REG_TERM 0xFFFF
|
|
|
|
struct noon010_format {
|
|
enum v4l2_mbus_pixelcode code;
|
|
enum v4l2_colorspace colorspace;
|
|
u16 ispctl1_reg;
|
|
};
|
|
|
|
struct noon010_frmsize {
|
|
u16 width;
|
|
u16 height;
|
|
int vid_ctl1;
|
|
};
|
|
|
|
static const char * const noon010_supply_name[] = {
|
|
"vdd_core", "vddio", "vdda"
|
|
};
|
|
|
|
#define NOON010_NUM_SUPPLIES ARRAY_SIZE(noon010_supply_name)
|
|
|
|
struct noon010_info {
|
|
struct v4l2_subdev sd;
|
|
struct v4l2_ctrl_handler hdl;
|
|
const struct noon010pc30_platform_data *pdata;
|
|
const struct noon010_format *curr_fmt;
|
|
const struct noon010_frmsize *curr_win;
|
|
unsigned int hflip:1;
|
|
unsigned int vflip:1;
|
|
unsigned int power:1;
|
|
u8 i2c_reg_page;
|
|
struct regulator_bulk_data supply[NOON010_NUM_SUPPLIES];
|
|
u32 gpio_nreset;
|
|
u32 gpio_nstby;
|
|
};
|
|
|
|
struct i2c_regval {
|
|
u16 addr;
|
|
u16 val;
|
|
};
|
|
|
|
/* Supported resolutions. */
|
|
static const struct noon010_frmsize noon010_sizes[] = {
|
|
{
|
|
.width = 352,
|
|
.height = 288,
|
|
.vid_ctl1 = 0,
|
|
}, {
|
|
.width = 176,
|
|
.height = 144,
|
|
.vid_ctl1 = 0x10,
|
|
}, {
|
|
.width = 88,
|
|
.height = 72,
|
|
.vid_ctl1 = 0x20,
|
|
},
|
|
};
|
|
|
|
/* Supported pixel formats. */
|
|
static const struct noon010_format noon010_formats[] = {
|
|
{
|
|
.code = V4L2_MBUS_FMT_YUYV8_2X8,
|
|
.colorspace = V4L2_COLORSPACE_JPEG,
|
|
.ispctl1_reg = 0x03,
|
|
}, {
|
|
.code = V4L2_MBUS_FMT_YVYU8_2X8,
|
|
.colorspace = V4L2_COLORSPACE_JPEG,
|
|
.ispctl1_reg = 0x02,
|
|
}, {
|
|
.code = V4L2_MBUS_FMT_VYUY8_2X8,
|
|
.colorspace = V4L2_COLORSPACE_JPEG,
|
|
.ispctl1_reg = 0,
|
|
}, {
|
|
.code = V4L2_MBUS_FMT_UYVY8_2X8,
|
|
.colorspace = V4L2_COLORSPACE_JPEG,
|
|
.ispctl1_reg = 0x01,
|
|
}, {
|
|
.code = V4L2_MBUS_FMT_RGB565_2X8_BE,
|
|
.colorspace = V4L2_COLORSPACE_JPEG,
|
|
.ispctl1_reg = 0x40,
|
|
},
|
|
};
|
|
|
|
static const struct i2c_regval noon010_base_regs[] = {
|
|
{ WIN_COLL_REG, 0x06 }, { HBLANKL_REG, 0x7C },
|
|
/* Color corection and saturation */
|
|
{ ISP_CTL_REG(0), 0x30 }, { ISP_CTL_REG(2), 0x30 },
|
|
{ YOFS_REG, 0x80 }, { DARK_YOFS_REG, 0x04 },
|
|
{ SAT_CTL_REG, 0x1F }, { BSAT_REG, 0x90 },
|
|
{ CMC_CTL_REG, 0x0F }, { CMC_OFSGH_REG, 0x3C },
|
|
{ CMC_OFSGL_REG, 0x2C }, { CMC_SIGN_REG, 0x3F },
|
|
{ CMC_COEF_REG(0), 0x79 }, { CMC_OFS_REG(0), 0x00 },
|
|
{ CMC_COEF_REG(1), 0x39 }, { CMC_OFS_REG(1), 0x00 },
|
|
{ CMC_COEF_REG(2), 0x00 }, { CMC_OFS_REG(2), 0x00 },
|
|
{ CMC_COEF_REG(3), 0x11 }, { CMC_OFS_REG(3), 0x8B },
|
|
{ CMC_COEF_REG(4), 0x65 }, { CMC_OFS_REG(4), 0x07 },
|
|
{ CMC_COEF_REG(5), 0x14 }, { CMC_OFS_REG(5), 0x04 },
|
|
{ CMC_COEF_REG(6), 0x01 }, { CMC_OFS_REG(6), 0x9C },
|
|
{ CMC_COEF_REG(7), 0x33 }, { CMC_OFS_REG(7), 0x89 },
|
|
{ CMC_COEF_REG(8), 0x74 }, { CMC_OFS_REG(8), 0x25 },
|
|
/* Automatic white balance */
|
|
{ AWB_CTL_REG(0), 0x78 }, { AWB_CTL_REG(1), 0x2E },
|
|
{ AWB_CTL_REG(2), 0x20 }, { AWB_CTL_REG(3), 0x85 },
|
|
/* Auto exposure */
|
|
{ AE_CTL_REG(0), 0xDC }, { AE_CTL_REG(1), 0x81 },
|
|
{ AE_CTL_REG(2), 0x30 }, { AE_CTL_REG(3), 0xA5 },
|
|
{ AE_CTL_REG(4), 0x40 }, { AE_CTL_REG(5), 0x51 },
|
|
{ AE_CTL_REG(6), 0x33 }, { AE_CTL_REG(7), 0x7E },
|
|
{ AE_CTL9_REG, 0x00 }, { AE_CTL10_REG, 0x02 },
|
|
{ AE_YLVL_REG, 0x44 }, { AE_YTH_REG(0), 0x34 },
|
|
{ AE_YTH_REG(1), 0x30 }, { AE_WGT_REG, 0xD5 },
|
|
/* Lens shading compensation */
|
|
{ LENS_CTRL_REG, 0x01 }, { LENS_XCEN_REG, 0x80 },
|
|
{ LENS_YCEN_REG, 0x70 }, { LENS_RC_REG, 0x53 },
|
|
{ LENS_GC_REG, 0x40 }, { LENS_BC_REG, 0x3E },
|
|
{ REG_TERM, 0 },
|
|
};
|
|
|
|
static inline struct noon010_info *to_noon010(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct noon010_info, sd);
|
|
}
|
|
|
|
static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
|
|
{
|
|
return &container_of(ctrl->handler, struct noon010_info, hdl)->sd;
|
|
}
|
|
|
|
static inline int set_i2c_page(struct noon010_info *info,
|
|
struct i2c_client *client, unsigned int reg)
|
|
{
|
|
u32 page = reg >> 8 & 0xFF;
|
|
int ret = 0;
|
|
|
|
if (info->i2c_reg_page != page && (reg & 0xFF) != 0x03) {
|
|
ret = i2c_smbus_write_byte_data(client, PAGEMODE_REG, page);
|
|
if (!ret)
|
|
info->i2c_reg_page = page;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int cam_i2c_read(struct v4l2_subdev *sd, u32 reg_addr)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct noon010_info *info = to_noon010(sd);
|
|
int ret = set_i2c_page(info, client, reg_addr);
|
|
|
|
if (ret)
|
|
return ret;
|
|
return i2c_smbus_read_byte_data(client, reg_addr & 0xFF);
|
|
}
|
|
|
|
static int cam_i2c_write(struct v4l2_subdev *sd, u32 reg_addr, u32 val)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct noon010_info *info = to_noon010(sd);
|
|
int ret = set_i2c_page(info, client, reg_addr);
|
|
|
|
if (ret)
|
|
return ret;
|
|
return i2c_smbus_write_byte_data(client, reg_addr & 0xFF, val);
|
|
}
|
|
|
|
static inline int noon010_bulk_write_reg(struct v4l2_subdev *sd,
|
|
const struct i2c_regval *msg)
|
|
{
|
|
while (msg->addr != REG_TERM) {
|
|
int ret = cam_i2c_write(sd, msg->addr, msg->val);
|
|
|
|
if (ret)
|
|
return ret;
|
|
msg++;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Device reset and sleep mode control */
|
|
static int noon010_power_ctrl(struct v4l2_subdev *sd, bool reset, bool sleep)
|
|
{
|
|
struct noon010_info *info = to_noon010(sd);
|
|
u8 reg = sleep ? 0xF1 : 0xF0;
|
|
int ret = 0;
|
|
|
|
if (reset)
|
|
ret = cam_i2c_write(sd, POWER_CTRL_REG, reg | 0x02);
|
|
if (!ret) {
|
|
ret = cam_i2c_write(sd, POWER_CTRL_REG, reg);
|
|
if (reset && !ret)
|
|
info->i2c_reg_page = -1;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* Automatic white balance control */
|
|
static int noon010_enable_autowhitebalance(struct v4l2_subdev *sd, int on)
|
|
{
|
|
int ret;
|
|
|
|
ret = cam_i2c_write(sd, AWB_CTL_REG(1), on ? 0x2E : 0x2F);
|
|
if (!ret)
|
|
ret = cam_i2c_write(sd, AWB_CTL_REG(0), on ? 0xFB : 0x7B);
|
|
return ret;
|
|
}
|
|
|
|
static int noon010_set_flip(struct v4l2_subdev *sd, int hflip, int vflip)
|
|
{
|
|
struct noon010_info *info = to_noon010(sd);
|
|
int reg, ret;
|
|
|
|
reg = cam_i2c_read(sd, VDO_CTL_REG(1));
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
reg &= 0x7C;
|
|
if (hflip)
|
|
reg |= 0x01;
|
|
if (vflip)
|
|
reg |= 0x02;
|
|
|
|
ret = cam_i2c_write(sd, VDO_CTL_REG(1), reg | 0x80);
|
|
if (!ret) {
|
|
info->hflip = hflip;
|
|
info->vflip = vflip;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* Configure resolution and color format */
|
|
static int noon010_set_params(struct v4l2_subdev *sd)
|
|
{
|
|
struct noon010_info *info = to_noon010(sd);
|
|
int ret;
|
|
|
|
if (!info->curr_win)
|
|
return -EINVAL;
|
|
|
|
ret = cam_i2c_write(sd, VDO_CTL_REG(0), info->curr_win->vid_ctl1);
|
|
|
|
if (!ret && info->curr_fmt)
|
|
ret = cam_i2c_write(sd, ISP_CTL_REG(0),
|
|
info->curr_fmt->ispctl1_reg);
|
|
return ret;
|
|
}
|
|
|
|
/* Find nearest matching image pixel size. */
|
|
static int noon010_try_frame_size(struct v4l2_mbus_framefmt *mf)
|
|
{
|
|
unsigned int min_err = ~0;
|
|
int i = ARRAY_SIZE(noon010_sizes);
|
|
const struct noon010_frmsize *fsize = &noon010_sizes[0],
|
|
*match = NULL;
|
|
|
|
while (i--) {
|
|
int err = abs(fsize->width - mf->width)
|
|
+ abs(fsize->height - mf->height);
|
|
|
|
if (err < min_err) {
|
|
min_err = err;
|
|
match = fsize;
|
|
}
|
|
fsize++;
|
|
}
|
|
if (match) {
|
|
mf->width = match->width;
|
|
mf->height = match->height;
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int power_enable(struct noon010_info *info)
|
|
{
|
|
int ret;
|
|
|
|
if (info->power) {
|
|
v4l2_info(&info->sd, "%s: sensor is already on\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
if (gpio_is_valid(info->gpio_nstby))
|
|
gpio_set_value(info->gpio_nstby, 0);
|
|
|
|
if (gpio_is_valid(info->gpio_nreset))
|
|
gpio_set_value(info->gpio_nreset, 0);
|
|
|
|
ret = regulator_bulk_enable(NOON010_NUM_SUPPLIES, info->supply);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (gpio_is_valid(info->gpio_nreset)) {
|
|
msleep(50);
|
|
gpio_set_value(info->gpio_nreset, 1);
|
|
}
|
|
if (gpio_is_valid(info->gpio_nstby)) {
|
|
udelay(1000);
|
|
gpio_set_value(info->gpio_nstby, 1);
|
|
}
|
|
if (gpio_is_valid(info->gpio_nreset)) {
|
|
udelay(1000);
|
|
gpio_set_value(info->gpio_nreset, 0);
|
|
msleep(100);
|
|
gpio_set_value(info->gpio_nreset, 1);
|
|
msleep(20);
|
|
}
|
|
info->power = 1;
|
|
|
|
v4l2_dbg(1, debug, &info->sd, "%s: sensor is on\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
static int power_disable(struct noon010_info *info)
|
|
{
|
|
int ret;
|
|
|
|
if (!info->power) {
|
|
v4l2_info(&info->sd, "%s: sensor is already off\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
ret = regulator_bulk_disable(NOON010_NUM_SUPPLIES, info->supply);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (gpio_is_valid(info->gpio_nstby))
|
|
gpio_set_value(info->gpio_nstby, 0);
|
|
|
|
if (gpio_is_valid(info->gpio_nreset))
|
|
gpio_set_value(info->gpio_nreset, 0);
|
|
|
|
info->power = 0;
|
|
|
|
v4l2_dbg(1, debug, &info->sd, "%s: sensor is off\n", __func__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int noon010_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct v4l2_subdev *sd = to_sd(ctrl);
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: ctrl_id: %d, value: %d\n",
|
|
__func__, ctrl->id, ctrl->val);
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_AUTO_WHITE_BALANCE:
|
|
return noon010_enable_autowhitebalance(sd, ctrl->val);
|
|
case V4L2_CID_BLUE_BALANCE:
|
|
return cam_i2c_write(sd, MWB_BGAIN_REG, ctrl->val);
|
|
case V4L2_CID_RED_BALANCE:
|
|
return cam_i2c_write(sd, MWB_RGAIN_REG, ctrl->val);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int noon010_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
|
|
enum v4l2_mbus_pixelcode *code)
|
|
{
|
|
if (!code || index >= ARRAY_SIZE(noon010_formats))
|
|
return -EINVAL;
|
|
|
|
*code = noon010_formats[index].code;
|
|
return 0;
|
|
}
|
|
|
|
static int noon010_g_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
|
|
{
|
|
struct noon010_info *info = to_noon010(sd);
|
|
int ret;
|
|
|
|
if (!mf)
|
|
return -EINVAL;
|
|
|
|
if (!info->curr_win || !info->curr_fmt) {
|
|
ret = noon010_set_params(sd);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
mf->width = info->curr_win->width;
|
|
mf->height = info->curr_win->height;
|
|
mf->code = info->curr_fmt->code;
|
|
mf->colorspace = info->curr_fmt->colorspace;
|
|
mf->field = V4L2_FIELD_NONE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Return nearest media bus frame format. */
|
|
static const struct noon010_format *try_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *mf)
|
|
{
|
|
int i = ARRAY_SIZE(noon010_formats);
|
|
|
|
noon010_try_frame_size(mf);
|
|
|
|
while (i--)
|
|
if (mf->code == noon010_formats[i].code)
|
|
break;
|
|
|
|
mf->code = noon010_formats[i].code;
|
|
|
|
return &noon010_formats[i];
|
|
}
|
|
|
|
static int noon010_try_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *mf)
|
|
{
|
|
if (!sd || !mf)
|
|
return -EINVAL;
|
|
|
|
try_fmt(sd, mf);
|
|
return 0;
|
|
}
|
|
|
|
static int noon010_s_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *mf)
|
|
{
|
|
struct noon010_info *info = to_noon010(sd);
|
|
|
|
if (!sd || !mf)
|
|
return -EINVAL;
|
|
|
|
info->curr_fmt = try_fmt(sd, mf);
|
|
|
|
return noon010_set_params(sd);
|
|
}
|
|
|
|
static int noon010_base_config(struct v4l2_subdev *sd)
|
|
{
|
|
struct noon010_info *info = to_noon010(sd);
|
|
int ret;
|
|
|
|
ret = noon010_bulk_write_reg(sd, noon010_base_regs);
|
|
if (!ret) {
|
|
info->curr_fmt = &noon010_formats[0];
|
|
info->curr_win = &noon010_sizes[0];
|
|
ret = noon010_set_params(sd);
|
|
}
|
|
if (!ret)
|
|
ret = noon010_set_flip(sd, 1, 0);
|
|
if (!ret)
|
|
ret = noon010_power_ctrl(sd, false, false);
|
|
|
|
/* sync the handler and the registers state */
|
|
v4l2_ctrl_handler_setup(&to_noon010(sd)->hdl);
|
|
return ret;
|
|
}
|
|
|
|
static int noon010_s_power(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct noon010_info *info = to_noon010(sd);
|
|
const struct noon010pc30_platform_data *pdata = info->pdata;
|
|
int ret = 0;
|
|
|
|
if (WARN(pdata == NULL, "No platform data!\n"))
|
|
return -ENOMEM;
|
|
|
|
if (on) {
|
|
ret = power_enable(info);
|
|
if (ret)
|
|
return ret;
|
|
ret = noon010_base_config(sd);
|
|
} else {
|
|
noon010_power_ctrl(sd, false, true);
|
|
ret = power_disable(info);
|
|
info->curr_win = NULL;
|
|
info->curr_fmt = NULL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int noon010_g_chip_ident(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_chip_ident *chip)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
return v4l2_chip_ident_i2c_client(client, chip,
|
|
V4L2_IDENT_NOON010PC30, 0);
|
|
}
|
|
|
|
static int noon010_log_status(struct v4l2_subdev *sd)
|
|
{
|
|
struct noon010_info *info = to_noon010(sd);
|
|
|
|
v4l2_ctrl_handler_log_status(&info->hdl, sd->name);
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops noon010_ctrl_ops = {
|
|
.s_ctrl = noon010_s_ctrl,
|
|
};
|
|
|
|
static const struct v4l2_subdev_core_ops noon010_core_ops = {
|
|
.g_chip_ident = noon010_g_chip_ident,
|
|
.s_power = noon010_s_power,
|
|
.g_ctrl = v4l2_subdev_g_ctrl,
|
|
.s_ctrl = v4l2_subdev_s_ctrl,
|
|
.queryctrl = v4l2_subdev_queryctrl,
|
|
.querymenu = v4l2_subdev_querymenu,
|
|
.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
|
|
.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
|
|
.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
|
|
.log_status = noon010_log_status,
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops noon010_video_ops = {
|
|
.g_mbus_fmt = noon010_g_fmt,
|
|
.s_mbus_fmt = noon010_s_fmt,
|
|
.try_mbus_fmt = noon010_try_fmt,
|
|
.enum_mbus_fmt = noon010_enum_fmt,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops noon010_ops = {
|
|
.core = &noon010_core_ops,
|
|
.video = &noon010_video_ops,
|
|
};
|
|
|
|
/* Return 0 if NOON010PC30L sensor type was detected or -ENODEV otherwise. */
|
|
static int noon010_detect(struct i2c_client *client, struct noon010_info *info)
|
|
{
|
|
int ret;
|
|
|
|
ret = power_enable(info);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(client, DEVICE_ID_REG);
|
|
if (ret < 0)
|
|
dev_err(&client->dev, "I2C read failed: 0x%X\n", ret);
|
|
|
|
power_disable(info);
|
|
|
|
return ret == NOON010PC30_ID ? 0 : -ENODEV;
|
|
}
|
|
|
|
static int noon010_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct noon010_info *info;
|
|
struct v4l2_subdev *sd;
|
|
const struct noon010pc30_platform_data *pdata
|
|
= client->dev.platform_data;
|
|
int ret;
|
|
int i;
|
|
|
|
if (!pdata) {
|
|
dev_err(&client->dev, "No platform data!\n");
|
|
return -EIO;
|
|
}
|
|
|
|
info = kzalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
sd = &info->sd;
|
|
strlcpy(sd->name, MODULE_NAME, sizeof(sd->name));
|
|
v4l2_i2c_subdev_init(sd, client, &noon010_ops);
|
|
|
|
v4l2_ctrl_handler_init(&info->hdl, 3);
|
|
|
|
v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops,
|
|
V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
|
|
v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops,
|
|
V4L2_CID_RED_BALANCE, 0, 127, 1, 64);
|
|
v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops,
|
|
V4L2_CID_BLUE_BALANCE, 0, 127, 1, 64);
|
|
|
|
sd->ctrl_handler = &info->hdl;
|
|
|
|
ret = info->hdl.error;
|
|
if (ret)
|
|
goto np_err;
|
|
|
|
info->pdata = client->dev.platform_data;
|
|
info->i2c_reg_page = -1;
|
|
info->gpio_nreset = -EINVAL;
|
|
info->gpio_nstby = -EINVAL;
|
|
|
|
if (gpio_is_valid(pdata->gpio_nreset)) {
|
|
ret = gpio_request(pdata->gpio_nreset, "NOON010PC30 NRST");
|
|
if (ret) {
|
|
dev_err(&client->dev, "GPIO request error: %d\n", ret);
|
|
goto np_err;
|
|
}
|
|
info->gpio_nreset = pdata->gpio_nreset;
|
|
gpio_direction_output(info->gpio_nreset, 0);
|
|
gpio_export(info->gpio_nreset, 0);
|
|
}
|
|
|
|
if (gpio_is_valid(pdata->gpio_nstby)) {
|
|
ret = gpio_request(pdata->gpio_nstby, "NOON010PC30 NSTBY");
|
|
if (ret) {
|
|
dev_err(&client->dev, "GPIO request error: %d\n", ret);
|
|
goto np_gpio_err;
|
|
}
|
|
info->gpio_nstby = pdata->gpio_nstby;
|
|
gpio_direction_output(info->gpio_nstby, 0);
|
|
gpio_export(info->gpio_nstby, 0);
|
|
}
|
|
|
|
for (i = 0; i < NOON010_NUM_SUPPLIES; i++)
|
|
info->supply[i].supply = noon010_supply_name[i];
|
|
|
|
ret = regulator_bulk_get(&client->dev, NOON010_NUM_SUPPLIES,
|
|
info->supply);
|
|
if (ret)
|
|
goto np_reg_err;
|
|
|
|
ret = noon010_detect(client, info);
|
|
if (!ret)
|
|
return 0;
|
|
|
|
/* the sensor detection failed */
|
|
regulator_bulk_free(NOON010_NUM_SUPPLIES, info->supply);
|
|
np_reg_err:
|
|
if (gpio_is_valid(info->gpio_nstby))
|
|
gpio_free(info->gpio_nstby);
|
|
np_gpio_err:
|
|
if (gpio_is_valid(info->gpio_nreset))
|
|
gpio_free(info->gpio_nreset);
|
|
np_err:
|
|
v4l2_ctrl_handler_free(&info->hdl);
|
|
v4l2_device_unregister_subdev(sd);
|
|
kfree(info);
|
|
return ret;
|
|
}
|
|
|
|
static int noon010_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct noon010_info *info = to_noon010(sd);
|
|
|
|
v4l2_device_unregister_subdev(sd);
|
|
v4l2_ctrl_handler_free(&info->hdl);
|
|
|
|
regulator_bulk_free(NOON010_NUM_SUPPLIES, info->supply);
|
|
|
|
if (gpio_is_valid(info->gpio_nreset))
|
|
gpio_free(info->gpio_nreset);
|
|
|
|
if (gpio_is_valid(info->gpio_nstby))
|
|
gpio_free(info->gpio_nstby);
|
|
|
|
kfree(info);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id noon010_id[] = {
|
|
{ MODULE_NAME, 0 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, noon010_id);
|
|
|
|
|
|
static struct i2c_driver noon010_i2c_driver = {
|
|
.driver = {
|
|
.name = MODULE_NAME
|
|
},
|
|
.probe = noon010_probe,
|
|
.remove = noon010_remove,
|
|
.id_table = noon010_id,
|
|
};
|
|
|
|
static int __init noon010_init(void)
|
|
{
|
|
return i2c_add_driver(&noon010_i2c_driver);
|
|
}
|
|
|
|
static void __exit noon010_exit(void)
|
|
{
|
|
i2c_del_driver(&noon010_i2c_driver);
|
|
}
|
|
|
|
module_init(noon010_init);
|
|
module_exit(noon010_exit);
|
|
|
|
MODULE_DESCRIPTION("Siliconfile NOON010PC30 camera driver");
|
|
MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
|
|
MODULE_LICENSE("GPL");
|