586 строки
13 KiB
C
586 строки
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Driver for 93xx46 EEPROMs
|
|
*
|
|
* (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/nvmem-provider.h>
|
|
#include <linux/eeprom_93xx46.h>
|
|
|
|
#define OP_START 0x4
|
|
#define OP_WRITE (OP_START | 0x1)
|
|
#define OP_READ (OP_START | 0x2)
|
|
#define ADDR_EWDS 0x00
|
|
#define ADDR_ERAL 0x20
|
|
#define ADDR_EWEN 0x30
|
|
|
|
struct eeprom_93xx46_devtype_data {
|
|
unsigned int quirks;
|
|
unsigned char flags;
|
|
};
|
|
|
|
static const struct eeprom_93xx46_devtype_data at93c46_data = {
|
|
.flags = EE_SIZE1K,
|
|
};
|
|
|
|
static const struct eeprom_93xx46_devtype_data at93c56_data = {
|
|
.flags = EE_SIZE2K,
|
|
};
|
|
|
|
static const struct eeprom_93xx46_devtype_data at93c66_data = {
|
|
.flags = EE_SIZE4K,
|
|
};
|
|
|
|
static const struct eeprom_93xx46_devtype_data atmel_at93c46d_data = {
|
|
.flags = EE_SIZE1K,
|
|
.quirks = EEPROM_93XX46_QUIRK_SINGLE_WORD_READ |
|
|
EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH,
|
|
};
|
|
|
|
static const struct eeprom_93xx46_devtype_data microchip_93lc46b_data = {
|
|
.flags = EE_SIZE1K,
|
|
.quirks = EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE,
|
|
};
|
|
|
|
struct eeprom_93xx46_dev {
|
|
struct spi_device *spi;
|
|
struct eeprom_93xx46_platform_data *pdata;
|
|
struct mutex lock;
|
|
struct nvmem_config nvmem_config;
|
|
struct nvmem_device *nvmem;
|
|
int addrlen;
|
|
int size;
|
|
};
|
|
|
|
static inline bool has_quirk_single_word_read(struct eeprom_93xx46_dev *edev)
|
|
{
|
|
return edev->pdata->quirks & EEPROM_93XX46_QUIRK_SINGLE_WORD_READ;
|
|
}
|
|
|
|
static inline bool has_quirk_instruction_length(struct eeprom_93xx46_dev *edev)
|
|
{
|
|
return edev->pdata->quirks & EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH;
|
|
}
|
|
|
|
static inline bool has_quirk_extra_read_cycle(struct eeprom_93xx46_dev *edev)
|
|
{
|
|
return edev->pdata->quirks & EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE;
|
|
}
|
|
|
|
static int eeprom_93xx46_read(void *priv, unsigned int off,
|
|
void *val, size_t count)
|
|
{
|
|
struct eeprom_93xx46_dev *edev = priv;
|
|
char *buf = val;
|
|
int err = 0;
|
|
int bits;
|
|
|
|
if (unlikely(off >= edev->size))
|
|
return 0;
|
|
if ((off + count) > edev->size)
|
|
count = edev->size - off;
|
|
if (unlikely(!count))
|
|
return count;
|
|
|
|
mutex_lock(&edev->lock);
|
|
|
|
if (edev->pdata->prepare)
|
|
edev->pdata->prepare(edev);
|
|
|
|
/* The opcode in front of the address is three bits. */
|
|
bits = edev->addrlen + 3;
|
|
|
|
while (count) {
|
|
struct spi_message m;
|
|
struct spi_transfer t[2] = { { 0 } };
|
|
u16 cmd_addr = OP_READ << edev->addrlen;
|
|
size_t nbytes = count;
|
|
|
|
if (edev->pdata->flags & EE_ADDR8) {
|
|
cmd_addr |= off;
|
|
if (has_quirk_single_word_read(edev))
|
|
nbytes = 1;
|
|
} else {
|
|
cmd_addr |= (off >> 1);
|
|
if (has_quirk_single_word_read(edev))
|
|
nbytes = 2;
|
|
}
|
|
|
|
dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n",
|
|
cmd_addr, edev->spi->max_speed_hz);
|
|
|
|
if (has_quirk_extra_read_cycle(edev)) {
|
|
cmd_addr <<= 1;
|
|
bits += 1;
|
|
}
|
|
|
|
spi_message_init(&m);
|
|
|
|
t[0].tx_buf = (char *)&cmd_addr;
|
|
t[0].len = 2;
|
|
t[0].bits_per_word = bits;
|
|
spi_message_add_tail(&t[0], &m);
|
|
|
|
t[1].rx_buf = buf;
|
|
t[1].len = count;
|
|
t[1].bits_per_word = 8;
|
|
spi_message_add_tail(&t[1], &m);
|
|
|
|
err = spi_sync(edev->spi, &m);
|
|
/* have to wait at least Tcsl ns */
|
|
ndelay(250);
|
|
|
|
if (err) {
|
|
dev_err(&edev->spi->dev, "read %zu bytes at %d: err. %d\n",
|
|
nbytes, (int)off, err);
|
|
break;
|
|
}
|
|
|
|
buf += nbytes;
|
|
off += nbytes;
|
|
count -= nbytes;
|
|
}
|
|
|
|
if (edev->pdata->finish)
|
|
edev->pdata->finish(edev);
|
|
|
|
mutex_unlock(&edev->lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on)
|
|
{
|
|
struct spi_message m;
|
|
struct spi_transfer t;
|
|
int bits, ret;
|
|
u16 cmd_addr;
|
|
|
|
/* The opcode in front of the address is three bits. */
|
|
bits = edev->addrlen + 3;
|
|
|
|
cmd_addr = OP_START << edev->addrlen;
|
|
if (edev->pdata->flags & EE_ADDR8)
|
|
cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS) << 1;
|
|
else
|
|
cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS);
|
|
|
|
if (has_quirk_instruction_length(edev)) {
|
|
cmd_addr <<= 2;
|
|
bits += 2;
|
|
}
|
|
|
|
dev_dbg(&edev->spi->dev, "ew%s cmd 0x%04x, %d bits\n",
|
|
is_on ? "en" : "ds", cmd_addr, bits);
|
|
|
|
spi_message_init(&m);
|
|
memset(&t, 0, sizeof(t));
|
|
|
|
t.tx_buf = &cmd_addr;
|
|
t.len = 2;
|
|
t.bits_per_word = bits;
|
|
spi_message_add_tail(&t, &m);
|
|
|
|
mutex_lock(&edev->lock);
|
|
|
|
if (edev->pdata->prepare)
|
|
edev->pdata->prepare(edev);
|
|
|
|
ret = spi_sync(edev->spi, &m);
|
|
/* have to wait at least Tcsl ns */
|
|
ndelay(250);
|
|
if (ret)
|
|
dev_err(&edev->spi->dev, "erase/write %sable error %d\n",
|
|
is_on ? "en" : "dis", ret);
|
|
|
|
if (edev->pdata->finish)
|
|
edev->pdata->finish(edev);
|
|
|
|
mutex_unlock(&edev->lock);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t
|
|
eeprom_93xx46_write_word(struct eeprom_93xx46_dev *edev,
|
|
const char *buf, unsigned off)
|
|
{
|
|
struct spi_message m;
|
|
struct spi_transfer t[2];
|
|
int bits, data_len, ret;
|
|
u16 cmd_addr;
|
|
|
|
if (unlikely(off >= edev->size))
|
|
return -EINVAL;
|
|
|
|
/* The opcode in front of the address is three bits. */
|
|
bits = edev->addrlen + 3;
|
|
|
|
cmd_addr = OP_WRITE << edev->addrlen;
|
|
|
|
if (edev->pdata->flags & EE_ADDR8) {
|
|
cmd_addr |= off;
|
|
data_len = 1;
|
|
} else {
|
|
cmd_addr |= (off >> 1);
|
|
data_len = 2;
|
|
}
|
|
|
|
dev_dbg(&edev->spi->dev, "write cmd 0x%x\n", cmd_addr);
|
|
|
|
spi_message_init(&m);
|
|
memset(t, 0, sizeof(t));
|
|
|
|
t[0].tx_buf = (char *)&cmd_addr;
|
|
t[0].len = 2;
|
|
t[0].bits_per_word = bits;
|
|
spi_message_add_tail(&t[0], &m);
|
|
|
|
t[1].tx_buf = buf;
|
|
t[1].len = data_len;
|
|
t[1].bits_per_word = 8;
|
|
spi_message_add_tail(&t[1], &m);
|
|
|
|
ret = spi_sync(edev->spi, &m);
|
|
/* have to wait program cycle time Twc ms */
|
|
mdelay(6);
|
|
return ret;
|
|
}
|
|
|
|
static int eeprom_93xx46_write(void *priv, unsigned int off,
|
|
void *val, size_t count)
|
|
{
|
|
struct eeprom_93xx46_dev *edev = priv;
|
|
char *buf = val;
|
|
int i, ret, step = 1;
|
|
|
|
if (unlikely(off >= edev->size))
|
|
return -EFBIG;
|
|
if ((off + count) > edev->size)
|
|
count = edev->size - off;
|
|
if (unlikely(!count))
|
|
return count;
|
|
|
|
/* only write even number of bytes on 16-bit devices */
|
|
if (edev->pdata->flags & EE_ADDR16) {
|
|
step = 2;
|
|
count &= ~1;
|
|
}
|
|
|
|
/* erase/write enable */
|
|
ret = eeprom_93xx46_ew(edev, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&edev->lock);
|
|
|
|
if (edev->pdata->prepare)
|
|
edev->pdata->prepare(edev);
|
|
|
|
for (i = 0; i < count; i += step) {
|
|
ret = eeprom_93xx46_write_word(edev, &buf[i], off + i);
|
|
if (ret) {
|
|
dev_err(&edev->spi->dev, "write failed at %d: %d\n",
|
|
(int)off + i, ret);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (edev->pdata->finish)
|
|
edev->pdata->finish(edev);
|
|
|
|
mutex_unlock(&edev->lock);
|
|
|
|
/* erase/write disable */
|
|
eeprom_93xx46_ew(edev, 0);
|
|
return ret;
|
|
}
|
|
|
|
static int eeprom_93xx46_eral(struct eeprom_93xx46_dev *edev)
|
|
{
|
|
struct eeprom_93xx46_platform_data *pd = edev->pdata;
|
|
struct spi_message m;
|
|
struct spi_transfer t;
|
|
int bits, ret;
|
|
u16 cmd_addr;
|
|
|
|
/* The opcode in front of the address is three bits. */
|
|
bits = edev->addrlen + 3;
|
|
|
|
cmd_addr = OP_START << edev->addrlen;
|
|
if (edev->pdata->flags & EE_ADDR8)
|
|
cmd_addr |= ADDR_ERAL << 1;
|
|
else
|
|
cmd_addr |= ADDR_ERAL;
|
|
|
|
if (has_quirk_instruction_length(edev)) {
|
|
cmd_addr <<= 2;
|
|
bits += 2;
|
|
}
|
|
|
|
dev_dbg(&edev->spi->dev, "eral cmd 0x%04x, %d bits\n", cmd_addr, bits);
|
|
|
|
spi_message_init(&m);
|
|
memset(&t, 0, sizeof(t));
|
|
|
|
t.tx_buf = &cmd_addr;
|
|
t.len = 2;
|
|
t.bits_per_word = bits;
|
|
spi_message_add_tail(&t, &m);
|
|
|
|
mutex_lock(&edev->lock);
|
|
|
|
if (edev->pdata->prepare)
|
|
edev->pdata->prepare(edev);
|
|
|
|
ret = spi_sync(edev->spi, &m);
|
|
if (ret)
|
|
dev_err(&edev->spi->dev, "erase error %d\n", ret);
|
|
/* have to wait erase cycle time Tec ms */
|
|
mdelay(6);
|
|
|
|
if (pd->finish)
|
|
pd->finish(edev);
|
|
|
|
mutex_unlock(&edev->lock);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t eeprom_93xx46_store_erase(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct eeprom_93xx46_dev *edev = dev_get_drvdata(dev);
|
|
int erase = 0, ret;
|
|
|
|
sscanf(buf, "%d", &erase);
|
|
if (erase) {
|
|
ret = eeprom_93xx46_ew(edev, 1);
|
|
if (ret)
|
|
return ret;
|
|
ret = eeprom_93xx46_eral(edev);
|
|
if (ret)
|
|
return ret;
|
|
ret = eeprom_93xx46_ew(edev, 0);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase);
|
|
|
|
static void select_assert(void *context)
|
|
{
|
|
struct eeprom_93xx46_dev *edev = context;
|
|
|
|
gpiod_set_value_cansleep(edev->pdata->select, 1);
|
|
}
|
|
|
|
static void select_deassert(void *context)
|
|
{
|
|
struct eeprom_93xx46_dev *edev = context;
|
|
|
|
gpiod_set_value_cansleep(edev->pdata->select, 0);
|
|
}
|
|
|
|
static const struct of_device_id eeprom_93xx46_of_table[] = {
|
|
{ .compatible = "eeprom-93xx46", .data = &at93c46_data, },
|
|
{ .compatible = "atmel,at93c46", .data = &at93c46_data, },
|
|
{ .compatible = "atmel,at93c46d", .data = &atmel_at93c46d_data, },
|
|
{ .compatible = "atmel,at93c56", .data = &at93c56_data, },
|
|
{ .compatible = "atmel,at93c66", .data = &at93c66_data, },
|
|
{ .compatible = "microchip,93lc46b", .data = µchip_93lc46b_data, },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table);
|
|
|
|
static const struct spi_device_id eeprom_93xx46_spi_ids[] = {
|
|
{ .name = "eeprom-93xx46",
|
|
.driver_data = (kernel_ulong_t)&at93c46_data, },
|
|
{ .name = "at93c46",
|
|
.driver_data = (kernel_ulong_t)&at93c46_data, },
|
|
{ .name = "at93c46d",
|
|
.driver_data = (kernel_ulong_t)&atmel_at93c46d_data, },
|
|
{ .name = "at93c56",
|
|
.driver_data = (kernel_ulong_t)&at93c56_data, },
|
|
{ .name = "at93c66",
|
|
.driver_data = (kernel_ulong_t)&at93c66_data, },
|
|
{ .name = "93lc46b",
|
|
.driver_data = (kernel_ulong_t)µchip_93lc46b_data, },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, eeprom_93xx46_spi_ids);
|
|
|
|
static int eeprom_93xx46_probe_dt(struct spi_device *spi)
|
|
{
|
|
const struct of_device_id *of_id =
|
|
of_match_device(eeprom_93xx46_of_table, &spi->dev);
|
|
struct device_node *np = spi->dev.of_node;
|
|
struct eeprom_93xx46_platform_data *pd;
|
|
u32 tmp;
|
|
int ret;
|
|
|
|
pd = devm_kzalloc(&spi->dev, sizeof(*pd), GFP_KERNEL);
|
|
if (!pd)
|
|
return -ENOMEM;
|
|
|
|
ret = of_property_read_u32(np, "data-size", &tmp);
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "data-size property not found\n");
|
|
return ret;
|
|
}
|
|
|
|
if (tmp == 8) {
|
|
pd->flags |= EE_ADDR8;
|
|
} else if (tmp == 16) {
|
|
pd->flags |= EE_ADDR16;
|
|
} else {
|
|
dev_err(&spi->dev, "invalid data-size (%d)\n", tmp);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (of_property_read_bool(np, "read-only"))
|
|
pd->flags |= EE_READONLY;
|
|
|
|
pd->select = devm_gpiod_get_optional(&spi->dev, "select",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(pd->select))
|
|
return PTR_ERR(pd->select);
|
|
|
|
pd->prepare = select_assert;
|
|
pd->finish = select_deassert;
|
|
gpiod_direction_output(pd->select, 0);
|
|
|
|
if (of_id->data) {
|
|
const struct eeprom_93xx46_devtype_data *data = of_id->data;
|
|
|
|
pd->quirks = data->quirks;
|
|
pd->flags |= data->flags;
|
|
}
|
|
|
|
spi->dev.platform_data = pd;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int eeprom_93xx46_probe(struct spi_device *spi)
|
|
{
|
|
struct eeprom_93xx46_platform_data *pd;
|
|
struct eeprom_93xx46_dev *edev;
|
|
int err;
|
|
|
|
if (spi->dev.of_node) {
|
|
err = eeprom_93xx46_probe_dt(spi);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
pd = spi->dev.platform_data;
|
|
if (!pd) {
|
|
dev_err(&spi->dev, "missing platform data\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
edev = devm_kzalloc(&spi->dev, sizeof(*edev), GFP_KERNEL);
|
|
if (!edev)
|
|
return -ENOMEM;
|
|
|
|
if (pd->flags & EE_SIZE1K)
|
|
edev->size = 128;
|
|
else if (pd->flags & EE_SIZE2K)
|
|
edev->size = 256;
|
|
else if (pd->flags & EE_SIZE4K)
|
|
edev->size = 512;
|
|
else {
|
|
dev_err(&spi->dev, "unspecified size\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pd->flags & EE_ADDR8)
|
|
edev->addrlen = ilog2(edev->size);
|
|
else if (pd->flags & EE_ADDR16)
|
|
edev->addrlen = ilog2(edev->size) - 1;
|
|
else {
|
|
dev_err(&spi->dev, "unspecified address type\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_init(&edev->lock);
|
|
|
|
edev->spi = spi;
|
|
edev->pdata = pd;
|
|
|
|
edev->nvmem_config.type = NVMEM_TYPE_EEPROM;
|
|
edev->nvmem_config.name = dev_name(&spi->dev);
|
|
edev->nvmem_config.dev = &spi->dev;
|
|
edev->nvmem_config.read_only = pd->flags & EE_READONLY;
|
|
edev->nvmem_config.root_only = true;
|
|
edev->nvmem_config.owner = THIS_MODULE;
|
|
edev->nvmem_config.compat = true;
|
|
edev->nvmem_config.base_dev = &spi->dev;
|
|
edev->nvmem_config.reg_read = eeprom_93xx46_read;
|
|
edev->nvmem_config.reg_write = eeprom_93xx46_write;
|
|
edev->nvmem_config.priv = edev;
|
|
edev->nvmem_config.stride = 4;
|
|
edev->nvmem_config.word_size = 1;
|
|
edev->nvmem_config.size = edev->size;
|
|
|
|
edev->nvmem = devm_nvmem_register(&spi->dev, &edev->nvmem_config);
|
|
if (IS_ERR(edev->nvmem))
|
|
return PTR_ERR(edev->nvmem);
|
|
|
|
dev_info(&spi->dev, "%d-bit eeprom containing %d bytes %s\n",
|
|
(pd->flags & EE_ADDR8) ? 8 : 16,
|
|
edev->size,
|
|
(pd->flags & EE_READONLY) ? "(readonly)" : "");
|
|
|
|
if (!(pd->flags & EE_READONLY)) {
|
|
if (device_create_file(&spi->dev, &dev_attr_erase))
|
|
dev_err(&spi->dev, "can't create erase interface\n");
|
|
}
|
|
|
|
spi_set_drvdata(spi, edev);
|
|
return 0;
|
|
}
|
|
|
|
static int eeprom_93xx46_remove(struct spi_device *spi)
|
|
{
|
|
struct eeprom_93xx46_dev *edev = spi_get_drvdata(spi);
|
|
|
|
if (!(edev->pdata->flags & EE_READONLY))
|
|
device_remove_file(&spi->dev, &dev_attr_erase);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct spi_driver eeprom_93xx46_driver = {
|
|
.driver = {
|
|
.name = "93xx46",
|
|
.of_match_table = of_match_ptr(eeprom_93xx46_of_table),
|
|
},
|
|
.probe = eeprom_93xx46_probe,
|
|
.remove = eeprom_93xx46_remove,
|
|
.id_table = eeprom_93xx46_spi_ids,
|
|
};
|
|
|
|
module_spi_driver(eeprom_93xx46_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Driver for 93xx46 EEPROMs");
|
|
MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
|
|
MODULE_ALIAS("spi:93xx46");
|
|
MODULE_ALIAS("spi:eeprom-93xx46");
|
|
MODULE_ALIAS("spi:93lc46b");
|